Related
I installed the Android OS on my phone that was found on this post:
http://forum.xda-developers.com/showpost.php?p=5480057&postcount=7353
I updated it and everything to what he has but occasionally my hard buttons at the bottom will either stay lit or not respond at all. Or it will even go crazy as if I were sitting there spinning my finger around the middle hard button thus making it highlight everything on my menu. That also causes trouble because then it thinks that when I press the home key it decides to bring up the call log screen.
Is there anyway to disable the "iPod Scroll" on the center hard key?
Dude. You should update to the newest build. And update Rootfs and zImages.
everything is in the XDAndroid thread in this forum.
I updated to the one found here:
http://forum.ppcgeeks.com/showthread.php?t=104276
And my scroll wheel and hard buttons still mess up from time to time.
What device do you have? RAPH100?
Sorry I don't know the developer names but its the HTC Fuze for AT&T so it's either the RAPH100 or just the RAPH. The start up config I'm using for Droid is the RAPH config.
Its best not to touch the capacitive DPAD and scroller during boot up. (safe time is when you can see a n d r o i d or the bootscreen.) This and having the pad clean is very crucial if you don't want it going crazy.
Try cleaning it with a wet cloth/tissue and try again.
I also had a screen protector which was massively scratched which caused problems. Ever since removing it the DPAD has been working great.
dude i totally have the same problem.
i ve tried wipe it clean but no luck.
sometimes everything work great but all of a sudden the buttons go wild and start flashing. after that, nothing will bring it back to normal. maybe after a few minutes if will stop blinking, lefting one or two LEDs on, and the button is then less responsive, though still works if you place your finger on the button you want for a few seconds before pressing.
I've seen a few people complaining about this but other says its because of our own device...
However everything works normally in WM... so i guess it might be about the sensitivity or something like that.
no matter it get fixed or not, I do want a method to disable the scrolling too, and maybe the left and right buttons, because they never work even under WM...
Yeah, mine does that too. Its random, sometimes not happening for days, then all of the sudden it starts. And this is within the same boot. Very odd. BTW, I keep up on all builds, always update asap, and my pad is spotless. I can't really figure it out.
also getting the exact same problem a lot, with everything up to date, clean, and not touching on bootup. would it be difficult to implement a code where we could just disable the middle scroll wheel? thats the thing that causes the most problems, and its not really that useful anyway.
@reverendkjr
This may be off topic but, you say you leave your phone running Droid all the time? How do you not drain your battery in like 4 hours unless you leave it charging all day?
But I'm pretty sure I'm as up to date as I can be and I still get this issue.
twiggy159 said:
@reverendkjr
This may be off topic but, you say you leave your phone running Droid all the time? How do you not drain your battery in like 4 hours unless you leave it charging all day?
But I'm pretty sure I'm as up to date as I can be and I still get this issue.
Click to expand...
Click to collapse
Its not off topic at all. I have been using Xandroid as my one and only OS for about a month now. I do charge it quite often, and I leave it on my desk at work on a charger. I also charge it at night as I sleep. I start off the day with 100% and can go 6 or so hours without issue. I continuously get 3-4 days in a row without a reboot or a failure. I find that it has become a suitable alternative to Winmo. The difficulty that I have is that there are primary functions which I miss a bit (camera mostly). But I feel that in order for me to fully understand and appreciate this, and to be able to contribute as a quasi beta tester, I must be willing to spend as much time with it as possible. I keep up with these forums on a regular basis , checking them sometimes 2-3 times a day. It is difficult to distinguish helpful info sometimes, since there are several versions floating around, and not everyone has the same setup & environment. I search as much as I can to find my own solutions, and for the most part, I'm relatively proud of myself. I usually only chime in when something is really bugging me, or I see something valuable that I can add to a conversation.
This issue was one that I had seen a few people talk about, and it had always been chalked up to being a dirty sensor type of thing, or someone touching the pad while it was booting. Having tried all of these solutions with no success, I had come to the determination that it was not constant, it could be ignored or dealt with, and eventually someone would fix it. It is most definitely not a "hot" item, so I never made a stink about it. Now that others have brought it forward, I decided to add my experiences.
I have loads of respect for the developers, and realize that they are not doing this for me. They are doing it for themselves, and fortunately, they share it with us. I am envious of their ability to make this project possible, and have no expectation or demands. I just take what they give us, and try to make it work for me.
Just my two sense, I'll step away from the pulpit now.
+1 for Navigation Wheel or capacitive D-pad issue
reverendkjr said:
Yeah, mine does that too. Its random, sometimes not happening for days, then all of the sudden it starts. And this is within the same boot. Very odd. BTW, I keep up on all builds, always update asap, and my pad is spotless. I can't really figure it out.
Click to expand...
Click to collapse
May I appeal to the developers to move Raph110 Navigation wheel to "Not working" so further development can occur. I do not touch the wheel during boot, but it still randomly flips out. My screen is clean. I did the clean cloth thing. The Navigation wheel not only flips out going all over the place. It actually rarely works the way it should in any application.
All I really need is to turn it off or disable the Navigation wheel if at all possible. Is it necessary to load the Nav-wheel capacitive drivers or can we disable them? Would it disrupt the function of the D-pad if disabled because all I need is the D-pad.
Chime in RAPH110 guys. Would you care if the Nav-wheel was disabled, because I actually think this is what is causing the issue.
I just want to make sure that I communicate to any developers that this is not a major issue. To me, I feel as though this is the only issue that I have at all. With the build I use, I honestly have no other issue which means that the Raph110 Android end product is 99% complete. To be direct, Thank you! I feel as though you purchased me a new phone, so this is no way a complaint. It is only the last 1% quality assurance analysis. ;-)
Edit: I just re-read this thread and the common denominator is HTC Fuze or RAPH110 users are having this minor issue. RAPH100 posting are saying "Just read the thread" or "use updated packages" or "clean the screen" which I think may all work and be valid for you RAPH100 users. I can indeed say without a doubt that this does not work for RAPH110.
In order for me to stop the random D-pad/Nav-wheel random scrolling, I have to screen lock it, let it go to sleep, then it might stop. It does stop mind you, but it is quite random how I am able to stop it.
spideyngo said:
May I appeal to the developers to move Raph110 Navigation wheel to "Not working" so further development can occur. I do not touch the wheel during boot, but it still randomly flips out. My screen is clean. I did the clean cloth thing. The Navigation wheel not only flips out going all over the place. It actually rarely works the way it should in any application.
All I really need is to turn it off or disable the Navigation wheel if at all possible. Is it necessary to load the Nav-wheel capacitive drivers or can we disable them? Would it disrupt the function of the D-pad if disabled because all I need is the D-pad.
Chime in RAPH110 guys. Would you care if the Nav-wheel was disabled, because I actually think this is what is causing the issue.
I just want to make sure that I communicate to any developers that this is not a major issue. To me, I feel as though this is the only issue that I have at all. With the build I use, I honestly have no other issue which means that the Raph110 Android end product is 99% complete. To be direct, Thank you! I feel as though you purchased me a new phone, so this is no way a complaint. It is only the last 1% quality assurance analysis. ;-)
Edit: I just re-read this thread and the common denominator is HTC Fuze or RAPH110 users are having this minor issue. RAPH100 posting are saying "Just read the thread" or "use updated packages" or "clean the screen" which I think may all work and be valid for you RAPH100 users. I can indeed say without a doubt that this does not work for RAPH110.
In order for me to stop the random D-pad/Nav-wheel random scrolling, I have to screen lock it, let it go to sleep, then it might stop. It does stop mind you, but it is quite random how I am able to stop it.
Click to expand...
Click to collapse
I think mine is a RAPH100... i cant take out the battery and double check... but mine is a unbranded version fron 3 australia... which i remember is raph100. and i totally have the same issue so this is not only happening on raph110 i believe.
Hey guys,
I was having the same problem in wm6.5 using many different energyroms, i disabled the scrollwheel altogether within the registry, never used it anyway. I am now getting the same problem in Android. is there is a registry parallel in android?
btw using a RAPH100 (all above fixes did not work)
devs, is there no easy way to implement a disable scroll wheel setting?? i swear that wheel will drive me crazy at times
While this could be an issue with all Raph 110's (AT&T Fuze), I think it is just a subset due to hardware problems. For me, the problem only happens occasionally and it does not only occur in xdandroid, but also in WM. There is an HTC tool (for WM) named NavDbgTool.exe that will show you what is happening with the capacitive buttons/touch area on the Raph. For me, when I have issues it lights up all over and shows touches occurring that are not occurring. I know of at least one XDA member (Captain Throwback) who was able to get a replacement phone (a Tilt2) from the insurance carrier because of this issue.
Perhaps this is a problem that eventually happens with all Raph 110's due to a hardware flaw. If that is the case, maybe enough complaints to AT&T will cause them to replace all of the devices (similar to how Sprint is replacing all their Touch Pro's due to overheating issues). In the meantime, if you have insurance, you should be able to get a replacement phone, just use the NavDbgTool.exe to document the problem in WM.
Also, due to this issue, it would be nice to have the option to disable the capacitive touch area on the Raph 110 in xdandroid (while keeping the D-pad working). I don't use it for anything now that zooming doesn't work for recent versions of Opera in WM.
I'm starting to think that this is Winmo ROM related. I noticed that since I've used the ROM that I have installed right now, the amount of times this issue has affected me has been slim to none. I am currently running the an NRG rom from june 12 with sense 2.5.
link: http://hotfile.com/dl/47992175/ccd8b44/Energy.RAPHAEL.21905.Sense2.5.Jun.12.7z.html
I'm not guaranteeing anything, but its working for me.
Maybe it has something to do with a package that is built into certain roms. I have noticed a few times where the winmo ROM i have loaded will affect Android's performance as well. The ROM that I am currently running was also what provided me with the ability to get GPS working in Android.
I hope this helps some of you.
I don't think it has anything to do with WM. For me, it only happens in Android.
firstly i have a raph100 that has this issue too, so its not just raph110
secondly, for me, this happens in wm too but a lot less frequently and seems to repair itself. It happens in android 70% of time when i boot, the 30% else happens later...
newly released zimages seem to shutdown the capacitive panel when sleeping, and this solved my problem a little bit since every time it goes crazy I can put the device in sleep then resume it...
But when it goes asleep the two buttons on the right act as back, the two on the left act as home. I think there is only one physical button on both sides, the touch figures if you are pressing back or end.
Sent from my AOSP on XDANDROID MSM using XDA App
I've been recently getting some instances where I would lock the phone and the fingerprint sensor won't respond to my finger.
This really started when I changed my lock to pattern swiping. Anyone have the same issue? I rebooted and changed it back to pin lock and it seems to be working all the time again, but I don't know what caused it in the first place.
Thoughts?
How many fingerprints do you have saved? I have 3. 2 of my left index finger and one of my right. 95% of the time I use my left. Set up several and see if that helps. Move your finger all over the sensor when setting it up so it gets a broad picture of your fingerprint
jbdan said:
How many fingerprints do you have saved? I have 3. 2 of my left index finger and one of my right. 95% of the time I use my left. Set up several and see if that helps. Move your finger all over the sensor when setting it up so it gets a broad picture of your fingerprint
Click to expand...
Click to collapse
It's not that it doesn't recognize my fingerprints, but it doesn't recognize fingerprints in general. So when I put my finger on it, it doesn't do the double buzz, it's just non responsive.
this happened to me yesterday several times. And i received phone yesterday... . I have two prints. Left and right index fingers. It didnt fail, just was as my finger wasnt in the reader
MDB08L
experienced the same thing this morning. phone was plugged charging and finger print would not detect, had to manually hit the power button then it worked. i find there are a lot of issues when the phone is charging though, screen sometimes becomes very unresponsive while charging. i think there was a similar thread about that as well.
Just started having this today as well. Sometimes doesn't acknowledge fingertip at all; works if i press lock button to wake the screen. Kind of a bummer, otherwise very satisfied overall. Hope it's just something that can be ironed out with a software update.
---------- Post added at 11:58 PM ---------- Previous post was at 11:52 PM ----------
Nothing out of the ordinary installed. Twitter, Instagram, Dropbox, etc. Nothing to interfere with lock screen. I do use pattern unlock.
EDIT: Will try PIN unlock instead of pattern for a while to see if it acts any differently.
ajmalott said:
Just started having this today as well. Sometimes doesn't acknowledge fingertip at all; works if i press lock button to wake the screen. Kind of a bummer, otherwise very satisfied overall. Hope it's just something that can be ironed out with a software update.
---------- Post added at 11:58 PM ---------- Previous post was at 11:52 PM ----------
Nothing out of the ordinary installed. Twitter, Instagram, Dropbox, etc. Nothing to interfere with lock screen. I do use pattern unlock.
EDIT: Will try PIN unlock instead of pattern for a while to see if it acts any differently.
Click to expand...
Click to collapse
Any luck? I did a system wipe after unlocking, and flashed new factory images but still happening.
No luck. Still happening either way. I'd say maybe 10% of the time, fingerprint unlock works correctly. The other 90% I have to wake the screen with the lock button first. Sometimes after trying fingerprint multiple times, when I press the lock button and the screen wakes there is a little message at the bottom that says "Fingerprint hardware unavailable" in red where the little fingerprint icon usually is. But then it immediately changes to the fingerprint icon and it works fine.
ajmalott said:
No luck. Still happening either way. I'd say maybe 10% of the time, fingerprint unlock works correctly. The other 90% I have to wake the screen with the lock button first. Sometimes after trying fingerprint multiple times, when I press the lock button and the screen wakes there is a little message at the bottom that says "Fingerprint hardware unavailable" in red where the little fingerprint icon usually is. But then it immediately changes to the fingerprint icon and it works fine.
Click to expand...
Click to collapse
I was able to find a bit more about this issue. When it happened again, I pressed the power button and quickly checked the fingerprint icon at the bottom of the lockscreen and it turned red and said "fingerprint hardware not available" for a split second before turning white again. I searched that error message and got this thread https://www.reddit.com/r/nexus5x/comments/3pm3lv/fingerprint_hardware_not_available/
I'll try wiping the cache and see if that helps at all. If not, I'm going to RMA.
jadesocket said:
I'll try wiping the cache and see if that helps at all. If not, I'm going to RMA.
Click to expand...
Click to collapse
I'm not much of a tinkerer, but I'll give this a shot. If it clears it up then okay, but if it happens again I'll probably RMA too. Not willing to put up with such inconsistencies on a brand new phone with such a highly touted feature.
Unrelated, this is actually already my second Nexus 5X. The first one I received would not take a charge, and I didn't have another USB Type-C cable to test, so they sent me an entirely new package. If wiping cache doesn't do it, I'm really not sure if I should bother with a third Nexus 5X. Kind of disheartening. I really enjoy the device otherwise.
So far so good for me, Let me know how it goes for you!
jadesocket said:
So far so good for me, Let me know how it goes for you!
Click to expand...
Click to collapse
Still happening today.
ajmalott said:
Still happening today.
Click to expand...
Click to collapse
That's a bummer. It actually happened again today for me too.
jadesocket said:
That's a bummer. It actually happened again today for me too.
Click to expand...
Click to collapse
I chatted with a Google support rep today, describing the issue and sending links to other message boards that are discussing this topic. He had me restart the phone in safe mode and sent a follow-up email, asking me to check back in after a few hours or a day or whenever, and let him know if the issue happens again. This was about seven or eight hours ago, and I haven't had the fingerprint sensor fail once when pulling the phone out of my pocket. It seems possible that a third-party app is interfering with the sensor's ability to function when the device is locked and the screen is off. I haven't installed very many apps, and they're all mainstream ones that everybody uses. My next step may be to factory reset the phone and stick to stock install for a day or two, then maybe add apps like Twitter, Instagram, etc., back one at a time per day and see if the issue returns. If it is a software issue, I don't think an RMA is necessary.
EDIT: Well it just did it, never mind all that
ajmalott said:
I chatted with a Google support rep today, describing the issue and sending links to other message boards that are discussing this topic. He had me restart the phone in safe mode and sent a follow-up email, asking me to check back in after a few hours or a day or whenever, and let him know if the issue happens again. This was about seven or eight hours ago, and I haven't had the fingerprint sensor fail once when pulling the phone out of my pocket. It seems possible that a third-party app is interfering with the sensor's ability to function when the device is locked and the screen is off. I haven't installed very many apps, and they're all mainstream ones that everybody uses. My next step may be to factory reset the phone and stick to stock install for a day or two, then maybe add apps like Twitter, Instagram, etc., back one at a time per day and see if the issue returns. If it is a software issue, I don't think an RMA is necessary.
EDIT: Well it just did it, never mind all that
Click to expand...
Click to collapse
I had hope Looks like RMA imminent for me. I put that glass screen protector on so well...
ajmalott said:
EDIT: Well it just did it, never mind all that
Click to expand...
Click to collapse
Lots of apps updated in the past week. The problem hasn't resurfaced for a whole 48 hours now. Hoping I can put this behind me
jadesocket said:
That's a bummer. It actually happened again today for me too.
Click to expand...
Click to collapse
I've spent the past week emailing back and forth with Google tech support, sending in bug reports, even sending a video of the problem happening (and showing the fingerprint sensor working immediately after pressing the lock button). They've determined that the fingerprint sensor hardware itself is fine, and the problem is that instead of waking the screen it's telling the phone to go into Doze. I'm still sending them bug reports, and they're trying to replicate the problem on their own Nexus 5X to determine what (possibly an app?) is causing the problem. I'll report back in with any more information, in case anyone else has the problem and ends up here.
It happened to me too, stock phone, no third apps installed. I will keep an eye on this.
off-topic: the discoloration of the back of the phone it's very bad!
ajmalott said:
I've spent the past week emailing back and forth with Google tech support, sending in bug reports, even sending a video of the problem happening (and showing the fingerprint sensor working immediately after pressing the lock button). They've determined that the fingerprint sensor hardware itself is fine, and the problem is that instead of waking the screen it's telling the phone to go into Doze. I'm still sending them bug reports, and they're trying to replicate the problem on their own Nexus 5X to determine what (possibly an app?) is causing the problem. I'll report back in with any more information, in case anyone else has the problem and ends up here.
Click to expand...
Click to collapse
I believe it's not the hardware as well. I've noticed that it's mainly when I get notifications from something that the sensor stops working.
jadesocket said:
I believe it's not the hardware as well. I've noticed that it's mainly when I get notifications from something that the sensor stops working.
Click to expand...
Click to collapse
Did a factory reset, and the problem came back almost immediately. Google tech support wanted me to reinstall OS entirely, but I don't have the right cable (type C to type A) to hook up to computer, so they just gave RMA. Got the new one on Friday, so far so good. But then, with the last phone, the issue didn't appear until after a week or two. Fingers pressed. Tech support really seemed to take my case as a rarity, and they were unable to recreate it with their own device. Here's hoping it's just limited to a few devices.
P.S. Off topic, but Google support wouldn't give me anything for the Black Friday deal. I asked multiple times in multiple ways. Oh well.
Hi,Guys...
Two days ago I was interested on a thread in Reddit, since it cant be accessed freely in my country so I choose to try it with VPN.
Then I installed alot of VPN apps and I just realized everything was turning ON at the same time and my phone start to laggy then freeze/stuck. Can't do a thing like moving screen or pressing button which force me to restart the phone.
After the phone reboot I uninstalled all of the VPN that I've been downloaded.
Then I look on my screen which is full of dulls cuz of use, so I wiped it with soft cloth (i like shiny screen), since the Ambient Display in ON, the screen was moved along with the wipe process which make the notification tile move up and down and the switch like Wifi,Mobile Data, DnD, etc get pressed randomly many times, then the phone freeze/stuck again.
I rebooted it, and when I'm about to use it like 5-10 seconds it freeze again but this time it had adjacent lines and have color like rainbow (i dont know what it called), and this is the beginning of the problem. It keep happening even now.
I can't use my phone for few minutes. Keep freezing/stuck sometimes it have lines sometimes dont.
Even if after I restart the phone and let it boot to homescreen, sometimes it would restart it by itself.
Is there anyone who ever face this kind of problem? I'm hoping this is not related to the hardware since until now this phone is not officialy released in my country so I dont know where I can bring this phone to get serviced.
Please for anyone who can tell me what to do to help bring my daily phone to be normal again.
Thanks in advanced. And sorry if my english is not that good.
bump. I have the same issue.
Cozmikk said:
bump. I have the same issue.
Click to expand...
Click to collapse
Hi man,
Sorry to hear that you have the same problem as mine ? Did you fixed already ?
I fixed mine (I guess..it's been a week without problem) with someone help
Maybe you should try it yourself and hope the method will work with your 5x too :highfive:
Here it is the thread link https://forum.xda-developers.com/nexus-5x/help/req-help-to-unbrick-t3251740
In case you have something to ask about the detailed process feel free to ask
Just wanted to start a thread to discuss this device. For those not familiar with it, it's a very inexpensive 11.6" laptop that runs RemixOS 2.0 from the factory. It does NOT have a touchscreen and the display is a low resolution (1366x768) TN panel display. The CPU is an Allwinner A64 Cortex A53 quad-core 64-bit processor.
The device I purchased (via their Kickstarter campaign) has 2gb RAM and 32gb storage - and it costs me $89.
Some interesting things I've found so far...
1. To disable the damn "click" sound every time you select something (via the touchpad or a mouse), download the QuickShortcutMaker application from the play store. Then expand the Settings items under the Activities section and find the "Other Sounds" activity. Once you click on the Other Sounds activity, click on "Try" on the right-hand side - this will open the "Other Sounds" dialog where you disable "Touch Sounds"! You can also disable some other sounds here. No idea why Remix doesn't allow access to these sound options. Explore the other Settings activities - there are some other cool things you can do. I also used this app to create "Shortcuts" to specific forums in Tapatalk (something that you do via widgets in standard Android). This QuickShortcutMaker app is pretty damn useful on this device!
2. I've found that I was able to connect my Apple USB->Ethernet adapter to this device and it works! However, it doesn't seem to work with ALL apps. For example, Tapatalk doesn't work with it for some reason - but so far, every other app has worked. You can also access ethernet settings via the QuickShortcutMaker app mentioned above.
3. Enable "Experimental Features" by clicking on the "Kernel Version" section of Settings->About. Once you do this, enable the "Use mouse wheel to simulate swipe gesture". This allows you to zoom in and out of things like web pages, images, etc. To do this, hold down CTRL+ALT while moving the mouse wheel. Apparently, the touchpad on this device does NOT provide pinch-to-zoom functionality, so without this setting, there is no way to zoom in and out in most apps! Kind of a big issue! Unless there is another way that I just don't know about. I know you can CTRL- and CTRL+ to zoom in and out in web pages, but that really just increases the size of the text - not really a true zoom in/out.
4. Gmail app. If you open the Gmail app as a window, you don't get the "split-screen" that you get if you open the app in full screen. But if you open in as a full-screen window and then "restore" it to a smaller window, the split-sceen function still works. I usually just leave Gmail minimized in order to keep the split-screen function active for Gmail.
5. Sometimes, the screen comes back on if you put the device into standby with the power button and then close the lid. I haven't been able to find the exact circumstances where the screen comes back on when closed, but it seems that when it does come on when it's closed, it stays on! Need to figure out why this occurs..
6. Bottom of device gets REALLY hot after any extended use. May be a long-term issue...
7. By default, wifi is set to turn off when in standby (unlike tablets) - unless the device is plugged in - then wifi will stay on. This can all be changed under Settings->Wifi->Advanced. I actually set mine to always turn wifi off when in standby since it seems that the device doesn't actually work while in standby anyway (again, unlike tablets). May help avoid wifi failure over the long-term.
8. I have run into websites (such as microcenter.com) where when you open a drop-down list, there is no way to "scroll" the list if it goes off the screen. To see what I mean, go to microcenter.com and try to set the store location - it opens a drop-down list that goes off the screen and there is no way to scroll down in the list! The "work-around" is to use the down arrow key, but it doesn't work very well (web page wants to update every time you press the down arrow)....
That's about it off the top of my head... It's a shame that this device cannot upgrade to RemixOS 3.0, like was stated in the kickstarted campaign (and later "retracted").
Anyone know how to root this thing?
It's an interesting device for the cost, but what I *really* want is a similar, large'ish device with a higher-quality, higher-resolution touchscreen that is removable from the keyboard - with at least 2gb of RAM (10" and 1gb of RAM isn't enough for RemixOS!) and runs RemixOS 3.0 - so far, I can't seem to find such a device...
Sent from my A1160 using Tapatalk
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Cerealius said:
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Click to expand...
Click to collapse
I just plugged mine in and it charged fine (blue LED next to charging port turns on when charging and turns off when fully charged).
To turn mine on, I just held down the power button on the keyboard for a while... You can also fully power it off that way as well (if it gets hung or something, which I have managed to do a few times now).
I've *really* put this thing through it's paces over the last few days. Overall, it's a decent device for the price. Personally, I'd rather spend a little more for one with a better, higher-res, removable touchscreen though.
I also have a HP Slatebook 10 x2 - and it's a great device, but stuck on Android 4. Otherwise, it has a MUCH nicer, removable touchscreen and even an extra battery in the keyboard (that charges the tablet when attached). Just wish it was a little bigger (13" or so) and was running Remix OS.
But, for $89, I can't complain, my A1160 actually runs pretty well for what it is...Luckily, I haven't had any issues with mine.
Sent from my HP SlateBook 10 x2 PC using Tapatalk
Hello...
@jtrosky, thanks for starting this thread, i've already gotten something out of it... getting rid of that damn clicking every keypress.
It was also nice to find that quickshortcutmaker, thats really a cool app that seems to allow more access than I could find...
Everyone else, hello!
I am an PC user since 84' and an Apple iPad user since, well the day the ipad 2 came out and now I'm on the iPad now. The only reason I say any of this is because the reason I got this Azpen A1160 was to help learn a bit about android and linux. I would also like to figure out how to get to the root...
Knock on wood but I got this three days ago and have literally beaten the software out of it loading, looking, deleting, and I thought I had screwed it up several times but it just keeps on ticking. The back does get a little warm, I haven't actually measured it yet but I'm going to, but I dont think it's too bad. I've run six full charges on battery and worked on it plugged in. (which it doesn't seem to like)
I'm happy with it right now and I think its going be a fun ride. I bet this is going to be a fun place to be in the next couple of months...
Buddy
Oh - one more thing I found out - and this may be well known already for those more familiar with RemixOS. If you click and hold on the little icons on the bottom-right of the taskbar, you can move them around. So, for example, you can make it so the brightness, volume, bluetooth and wifi icons are always visible, even when that section is "collapsed"...
Also - I *love* having the key to disable the touchpad (the key next to the arrow keys). Since I usually use a bluetooth mouse, it's so nice being able to disable the trackpad so quickly and easily!
Oh - and the Prtscr button on the keyboard brings up the very cool screen capture tool, which let's you select what area of the screen to capture. Very handy tool!
Still not sure what the "Pausc" button does - I'm assuming it's actually a misprint and it's supposed to say "Pause". Gotta love cheap electronics that are made in China!
So far, this device is definitely working well for me. Although, I'm not so sure the screen is big enough to truly take advantage of the RemixOS windowing capabilities... But, it's still better than not having any windowing capabilities.
Sent from my A1160 using Tapatalk
One more quick tip - there are apps out there that will let you boost the volume of the device. Right now, I'm using Music Volume EQ to boost the volume, but there are probably better apps out there for this purpose... Will explore more later and post an update if I find a better app.
Sent from my A1160 using Tapatalk
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
sephitoor said:
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
Click to expand...
Click to collapse
I have not tried setting up the lock screen (I just leave mine unlocked). And no, I have not had any issues with a blank screen when turning the device back up. What's strange is that the device does not automatically turn on when opening the screen - at least not on my device - I have to press the power button.
Your issues are probably because of the poor quality control with these device. Somehow, I lucked out and got a "good one", but many people seem to be having build-quality issues with them...
Sent from my A1160 using Tapatalk
Great posts and many thanks to the OP.
I got a US 2 pin power plug instead of a UK plug. Does anyone know of a similar products power lead that will fit our A1160?
Need help...
Hi,
First, thanks for creating this thread and posting your tips. Obviously there are not a lot of people using this device yet so it is great to find useful info on it.
Since there is no known root solution yet, I tried installing NetGuard as an adbllocking solution that does not require root. I have used it before without any issues. Unfortunately, on the Azpen, every time that I enable it, it blocks all internet access (it is obviously not supposed to do that). I even tried alternative apps like AdClear and got the exact same result. There is something strange going on with the Azpen. I would really appreciate it if anyone had any pointers as to how I could resolve this.
Thanks...
Welp! I had much higher hopes for this device and I haven't even received mine yet! Will this be rootable?
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
HyugaSho said:
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
Click to expand...
Click to collapse
That is *really* interesting! Sure enough, if I disable and re-enable the wifi, the MAC address does change!! That makes absolutely no sense - I've never seen such a thing!
I'll look into that a little more - but without root, I doubt there is anything that can be done about it. So strange!
One possible option - set wifi to stay enabled all of the time - maybe that way the MAC will stay the same. You can set that in the wifi settings advanced options. I've found that you have to reboot after setting it to always stay active....
Sent from my A1160 using Tapatalk
So far I have been impressed for the cost of this unit. I have a few concerns and wanted to see if anyone had input:
1. Since the length of the power chord is so short. Is it possible to use a USB to Barrel jack type of adapter to power this? That way you can attach to a portable power bank?
2. battery power, I find it to not last that long and I find it takes forever to charge. I thought that this would last 5-7 hours unplugged, nope. It was supposed to charge within in a hour, nope. Any ideas on this?
I use an external mouse and click on the trackpad disable button. I find it much easier to use the computer when typing.
I'm looking at Pinebook, a notebook having the same AllWinner processor (CortexA53).
It seems this notebook can run all OSs suppoted by Pine64, such as Android, some linux distro, Windows IOT and they are working on a Chroimum porting (try to have a look at the pin64 forum).
Do you think it would be possible to do the same with A1160 ?
Another solution could be PhoenixOs (as pointed out in some comment on Kickstarter).
There are already some devices with CortexA53 processor running PhoenixOS out of the box.
I honestly don't know what OS's can be ported over to this device yet. I have a feeling that it's never going to have a huge user base though, so I wouldn't expect much from the developers out there.
Now that Chromebooks can run Android apps, this device just isn't quite as interesting as it once was. Basically, you can now get an inexpensive, *high quality* Chromebook and still have most of the advantages of this device, plus the high quality and frequent updates part.
To be completely honest, I have very low expectations for this device in the long-term. With how hot it gets after any real usage, I expect the mainboard to fail in short order. We'll see. Although, so far, I've really been using it pretty heavily and it does seem to be holding up, but it's only been about a week....
Sent from my A1160 using Tapatalk
Something else I recently noticed - and this may already be a well-known thing with RemixOS... If you close an app by clicking the back arrow on the top-left of the window, you continue to get notifications for that app. But if you close it by clicking the "X" in the top-right of the window, it seems to completely the kill the process and you no longer receive notifications (or if it's an app that stays around and puts a "permanent" notification in the notification tray, the "x" seems to completely stop the app as well and removes its notification item).
At least that's what seems to happen...
Also noticed that even if you setup wifi to stay active even with power off, the unit eventually goes into a "deep sleep" where you will no longer get new email notifications, etc. It even seems to turn wifi off after a while (even though it's set to stay on all of the time).
Lastly, if you have an external mouse connected, close the laptop lid and then move the mouse, it turns the screen back on - even while closed!
Sent from my A1160 using Tapatalk
Hi All,
Saw this in the comments and thought I would chip in with my experience so far.
I got the 64GB version and so far it is the computer I have paid for.
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
I seem to have a good unit and don't have any problems with the unit.
My only gripe is that the battery kinda sucks and after using it intensive for like 3-4 hrs, it will have almost no battery. I wish it came with my UK adapter instead of the US one, but its okay.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
MindlessManiacs said:
Hi All,
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
Click to expand...
Click to collapse
For what it's worth, my trackpad actually works really well. I was surprised to read all of the complaints about it. I'm guessing that a lot of them are defective?
Regarding the widgets, no - there is no way to use Widgets in Remix OS 2.0 (not sure about 3.0), which is a huge limitation. Widgets are one of the things that make Android so powerful - and I miss them big time in Remix OS...
I too would like to know if there is a way to load PhoenixOS on this device. I thought I saw it mentioned somewhere that it would be possible (maybe one of the updates on Kickstarter?). I will see if I can email Azpen about this. RemixOS 2.0 is really good, but not quite "finished" in my opinion...
Sent from my A1160 using Tapatalk
Hi! Does somebody receive a blank white screen when laptop booting or waking up?
Every time when I push power button I get a blank white screen... How I can fix it?
Hi,
My phone sometimes doesn't respond when I try to wake up the screen. Double tap, power button, fingerprint, nothing works. The only thing I can do at that point is to force reboot. This is a pretty serious issue. When this happens I had to wait for it to reboot.
Anyone else having this issue?
I'm also experiencing this and I'm not able to reproduce it. It drives me crazy, I so wanted to like this phone
That has happened to me too. Probably 3 - 4x over the course of a little over two months of use.
HMD Global's software sucks. This will be my last "Nokia".
jason2678 said:
That has happened to me too. Probably 3 - 4x over the course of a little over two months of use.
HMD Global's software sucks. This will be my last "Nokia".
Click to expand...
Click to collapse
Their hardware is pretty good. Only if the bootloader can be easily unlocked... this would be a good phone.
I think I may have experienced what you're talking about. Most of the time for me, it seems to be a notification screen overlay issue. When it happens, I get no reaction on my screen until I brush from the top down, as if I'm pulling down the notification screen. After that, the phone rights itself and behaves normally.
I've experienced this in the past and recently. Not often, but sometimes. It seems to be camera-related.