Develop Bugs

[KERNEL][4.2/4.2.1] Stock kernel - CWM flashable

I've been playing with a few of the kernels available for 4.2.x so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2/4.2.1 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:

jlink38 said:
I've been playing with a few of the kernels available for 4.2 so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:
Click to expand...
Click to collapse
Thank you sir!
Sent from my Galaxy Nexus using Tapatalk 2

wish i had had this yesterday....haha thanks sir.

good job！thanks
Sent from my Galaxy Nexus using xda premium

Thanks for taking the time to post this kernel. A lot of people have been looking for it.
Sent from my Galaxy Nexus using Tapatalk 2

_Opiate_ said:
Thanks for taking the time to post this kernel. A lot of people have been looking for it.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
No problem!
Sent from my Nexus 7 using Tapatalk 2

Thank you. This is definitely very helpful for people like me who aren't aware that custom kernel wouldn't be backwards compatible.
However, I'm using nexus 7, just wondering how could I extract the stock kernel from the nexus 7 factory image?
(I understand that this isn't a nexus 7 post but I'm just asking a general question on how to get the stock kernel hope that's ok)
I assume this kernel wouldn't work for my device either?
Thanks in advance.

SpikeySpy said:
Thank you. This is definitely very helpful for people like me who aren't aware that custom kernel wouldn't be backwards compatible.
However, I'm using nexus 7, just wondering how could I extract the stock kernel from the nexus 7 factory image?
(I understand that this isn't a nexus 7 post but I'm just asking a general question on how to get the stock kernel hope that's ok)
I assume this kernel wouldn't work for my device either?
Thanks in advance.
Click to expand...
Click to collapse
Good question. I will create a stock kernel flash for the Nexus 7 (as I have one as well) and post it up there in the N7 XDA forum.
Also, the kernel is the boot.img file located in the zip for ROMs. You can fastboot install it, or make it into a CWM file which is good in case you don't have a computer with ADB nearby. Link to N7 Stock kernel:
http://forum.xda-developers.com/showthread.php?p=34254473
Thanks!

Thank you for ur reply. Definitely gonna save me lots of time!
How do you make it a cwm file? Just zipping the .img file?
Also, I can't seems to boot into cwm recovery without a toolkit is that normal for installing an incorrect custom kernel?

SpikeySpy said:
Thank you for ur reply. Definitely gonna save me lots of time!
How do you make it a cwm file? Just zipping the .img file?
Also, I can't seems to boot into cwm recovery without a toolkit is that normal for installing an incorrect custom kernel?
Click to expand...
Click to collapse
Boot up holding all the buttons to get into recovery. Then flash.
Google for the cyanogenmod walkthrough on how to make a kernel flash. Its a bit in depth for here. Good luck!
Sent from my Nexus 7 using Tapatalk 2

Android 4.2.2
Is this kernel compatible with stock Android 4.2.2?

Not sure actually. Hopefully someone can test it out as I no longer have a GNex.
Sent from my GT-I9300 using Tapatalk 2

delete

jlink38 said:
I've been playing with a few of the kernels available for 4.2.x so far and wanted to get back to the stock kernel in between testing kernels out. Also good for those who may have accidentally flashed a 4.1.2 kernel. This is a flashable CWM 4.2 Galaxy Nexus JOP40C kernel. Tested and working on my stock/rooted 4.2/4.2.1 GNex. As always, flash at your own risk.
Thanks to kalo86 for providing the AOSP ROM 4.2 zip where the boot image came from. :good:
Click to expand...
Click to collapse
It is good for Gnex 4.2.2 too ?
Thanks

Deleted

paolocorpo said:
It is good for Gnex 4.2.2 too ?
Thanks
Click to expand...
Click to collapse
Better not flash it as 4.2.1 and 4.2.2 kernels are not compatible with each other.
Sent from my Galaxy Nexus using Tapatalk 2

is there a flashable kernel for 4.1.1? i'm trying to do OTA but it craps out because of franco Kernel that I have installed (and i didnt do backup(()

Sorry for this noob question,can i flash this kernel and use it with 4.1.2 stock rom?
Sent from my Galaxy Nexus using xda app-developers app

RezaFaliq said:
Sorry for this noob question,can i flash this kernel and use it with 4.1.2 stock rom?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
The title of this thread states 4.2/4.21, so my guess would be no on 4.1.2

[Q] GB kernel ?

Hello
Due to the fact that the camera on the ICS and JB is not as good as the GB one, I decided to stick with GB ( correct me if I'm wrong )
So I see a lot of kernels for both ICS and JB , but none for GB, so I searched, but found nothing
Therefore I would like to know if any galaxy W user is running GB and has a custom kernel can share it with me ?
thank you , peace out

Arco made a very good GB kernel but I dont fint the link as I know Kezra V4 use this kernel.
Sent from my GT-I8150 using xda app-developers app

can I extract a kernel from a rom Zip file ?

foued1994 said:
can I extract a kernel from a rom Zip file ?
Click to expand...
Click to collapse
Yes there is a tutorial in development section.
Sent from my GT-I8150 using xda app-developers app

foued1994 said:
can I extract a kernel from a rom Zip file ?
Click to expand...
Click to collapse
yes. open his zip and extract the boot.img

MIUI V 5 Xperia S and SL

hello everyone ,,
well idk if it good news or not but i found something interesting on MIUI form UK , i found that our beloved Xperia S show up again thanks to Xioami
with a new rom based on JB official release ,, idk if this for locked or unlocked bootloader or both
here is the link and i hope if anyone have any information about it just tell us plz
http://miuiandroid.com/community/threads/3-6-14.20842/

its port based on CM10

If it's based on cm10, then it is not compatible with locked boatloader.
Sent from my LT26i using xda premium

only for ub ?...crap ...i can't unlock my bootloader :crying:

ArekMe said:
its port based on CM10
Click to expand...
Click to collapse
Are you sure?

hmmm...i can't stand...i think i will flash this...what the hell :cyclops:

Crap againt...fla**** an the phone dont't start,the only solution was flash tool
Sent from my LT26i using xda premium

I told you!
For now no solution for V5, maybe someone port the rom and use stock bl, as it was on V4.
The main problem is that is that miui gave up on lt26i so we wont have an official solution.
Sent from my LT26i using xda premium

Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.

djolivier said:
Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.
Click to expand...
Click to collapse
i will give it a try but only in week end...im busy right now:good:

Also the build.prop is messed up. Is this really based on Stock (official) JB?
Code:
ro.build.display.id=cm_nozomi-userdebug 4.1.2 JZO54K eng.root.20130517.233532 test-keys
Code:
ro.cm.version=10-20130517-UNOFFICIAL-nozomi
ro.modversion=10-20130517-UNOFFICIAL-nozomi

djolivier said:
Also the build.prop is messed up. Is this really based on Stock (official) JB?
Code:
ro.build.display.id=cm_nozomi-userdebug 4.1.2 JZO54K eng.root.20130517.233532 test-keys
Code:
ro.cm.version=10-20130517-UNOFFICIAL-nozomi
ro.modversion=10-20130517-UNOFFICIAL-nozomi
Also the build.prop is messed up. Is this really based on Stock (official) JB?
Click to expand...
Click to collapse
MIUI V5 is NOT based on Official Kernel from Sony.
It does not work on Locked Bootloaders... still hopping they make a version with that kernel, but for now no options for LB with MIUI.

That's what I meant
Gesendet von meinem Sony Xperia S mit Tapatalk 4

djolivier said:
Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.
Click to expand...
Click to collapse
Dont work

Yea that's obvious, since we know that it isn't based on Stock now.

dont work for me:crying:

[Q] ramdisk

What is the deal with ramdisk? How do i switch between kernels to test out¿ do i have to flash a rom everytime?
Ex: i was runnin stock rom/kernal 4.3 for awhile, then just flashed fancy.. Do i have to reflash stock rom to clean the ramdisk?
Sent from my Nexus 7 using Tapatalk

If fancy has its own ramdisk it is reccomended to dirty flash your rom.
Sent from my Galaxy Nexus using XDA Free mobile app

Thanks man.. Yeh he uses universal ramdisk via anykernel2.. So i gues im alright. What does the ramdisk hold and y isnt there a way to -rm or format via cust recovery?
I tried to google it to find more info on it.. I guess i need to dig deeper
Sent from my Galaxy Nexus using Tapatalk

LiquidXed said:
Thanks man.. Yeh he uses universal ramdisk via anykernel2.. So i gues im alright. What does the ramdisk hold and y isnt there a way to -rm or format via cust recovery?
I tried to google it to find more info on it.. I guess i need to dig deeper
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
the way I've always assumed for ramdisk was specific stock settings, symlink setups, init files and such
sorry I can't explain much further.
maybe to try to get more useful info for your question, try Google "zimage vs boot.img, what does kernels ramdisk do/contains"
you will probably get many Linux.results, but they translate very easily into android since android kernel is Linux based

Lol.. Thanks
Sent from my Galaxy Nexus using Tapatalk

LiquidXed said:
What is the deal with ramdisk? How do i switch between kernels to test out¿ do i have to flash a rom everytime?
Ex: i was runnin stock rom/kernal 4.3 for awhile, then just flashed fancy.. Do i have to reflash stock rom to clean the ramdisk?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
basically certain kernels have its own ramdisk (. i.e franco )so its not recommended to flash different kernel without flashing the rom first.
wipe cache
flash rom
flash gapps
flash supersu if needed
flash kernel

France firmware NH1 for TWRP available?

Hello guys,
I am looking for the latest stock firmware for T805 from France (T805XXU1ANH1) as a flashable zip file for TWRP recovery.
I am looking for this because if there would be a zip file I could delete bloated apps and modify zip file prior to flashing. I could also simply flash this zip file over my current installation without loosing all data.
Would be cool if anybody can help, otherwise I have to flash this firmware again from the bottom via Odin if I got some errors, FC's and so on :good:
Regards

Just use the debloated rom from edan.

Thanks but this ROM is for 705, not 805
Regards
Sent from my GT-I9100 using german Tapatalk 4

I think he meant thedevious1's rom

LoVeRice said:
I think he meant thedevious1's rom
Click to expand...
Click to collapse
You mean SuperSamsung?
Yes, I have bookmarked this thread but for now this ROM is still NG1 (Hongkong) based I think..
Regards
Sent from my GT-I9100 using german Tapatalk 4