hello everyone ,,
well idk if it good news or not but i found something interesting on MIUI form UK , i found that our beloved Xperia S show up again thanks to Xioami
with a new rom based on JB official release ,, idk if this for locked or unlocked bootloader or both
here is the link and i hope if anyone have any information about it just tell us plz
http://miuiandroid.com/community/threads/3-6-14.20842/
its port based on CM10
If it's based on cm10, then it is not compatible with locked boatloader.
Sent from my LT26i using xda premium
only for ub ?...crap ...i can't unlock my bootloader :crying:
ArekMe said:
its port based on CM10
Click to expand...
Click to collapse
Are you sure?
hmmm...i can't stand...i think i will flash this...what the hell :cyclops:
Crap againt...fla**** an the phone dont't start,the only solution was flash tool
Sent from my LT26i using xda premium
I told you!
For now no solution for V5, maybe someone port the rom and use stock bl, as it was on V4.
The main problem is that is that miui gave up on lt26i so we wont have an official solution.
Sent from my LT26i using xda premium
Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.
djolivier said:
Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.
Click to expand...
Click to collapse
i will give it a try but only in week end...im busy right now:good:
Also the build.prop is messed up. Is this really based on Stock (official) JB?
Code:
ro.build.display.id=cm_nozomi-userdebug 4.1.2 JZO54K eng.root.20130517.233532 test-keys
Code:
ro.cm.version=10-20130517-UNOFFICIAL-nozomi
ro.modversion=10-20130517-UNOFFICIAL-nozomi
djolivier said:
Also the build.prop is messed up. Is this really based on Stock (official) JB?
Code:
ro.build.display.id=cm_nozomi-userdebug 4.1.2 JZO54K eng.root.20130517.233532 test-keys
Code:
ro.cm.version=10-20130517-UNOFFICIAL-nozomi
ro.modversion=10-20130517-UNOFFICIAL-nozomi
Also the build.prop is messed up. Is this really based on Stock (official) JB?
Click to expand...
Click to collapse
MIUI V5 is NOT based on Official Kernel from Sony.
It does not work on Locked Bootloaders... still hopping they make a version with that kernel, but for now no options for LB with MIUI.
That's what I meant
Gesendet von meinem Sony Xperia S mit Tapatalk 4
djolivier said:
Open the ROM.zip with 7zip, WinRAR or whatever and replace the current kernel with the stock kernel by copying stock boot.img and system/lib/modules folder into ROM.zip, that might work.
Click to expand...
Click to collapse
Dont work
Yea that's obvious, since we know that it isn't based on Stock now.
dont work for me:crying:
Related
Hello
Due to the fact that the camera on the ICS and JB is not as good as the GB one, I decided to stick with GB ( correct me if I'm wrong )
So I see a lot of kernels for both ICS and JB , but none for GB, so I searched, but found nothing
Therefore I would like to know if any galaxy W user is running GB and has a custom kernel can share it with me ?
thank you , peace out
Arco made a very good GB kernel but I dont fint the link as I know Kezra V4 use this kernel.
Sent from my GT-I8150 using xda app-developers app
can I extract a kernel from a rom Zip file ?
foued1994 said:
can I extract a kernel from a rom Zip file ?
Click to expand...
Click to collapse
Yes there is a tutorial in development section.
Sent from my GT-I8150 using xda app-developers app
foued1994 said:
can I extract a kernel from a rom Zip file ?
Click to expand...
Click to collapse
yes. open his zip and extract the boot.img
Hi there,
since I didn't enjoy compiling CM10.1 (even if it worked afterwards), I wanted to "start" developing on the stock 4.1.2 kernel but although my build booted, there was no signal.
I downloaded Samsung's source (GT-I8160_JB_opensource) and compiled it with the prebuilt compiler from CM's source (arm-eabi-4.4.3) embedding into the kernel binary the default initramfs from the stock kernel. Deleted caches and the phone booted normally, but the baseband was unknown and no service was present. Reflashing the stock kernel brought back signal and everything worked fine.
Any advice for a novice?
Thanks
try flashing other modem.bin.md5 (from other fw version)
Rox said:
try flashing other modem.bin.md5 (from other fw version)
Click to expand...
Click to collapse
Oooh thank you Rox...
I used the XEO XXMG2 release... but I don't see how would changing the modem solve anything, I mean, which should I use?
--EDIT--
May it be because I flashed the kernel by Heimdall instead of flashing it at runtime via the terminal (and thus the device is not official anymore)?
I forgot to tell that I'm doing all this on the stock ROM.
Do you have imei?
Sent from my GT-I8160
Rox said:
Do you have imei?
Sent from my GT-I8160
Click to expand...
Click to collapse
Nope, with my kernel *#06# gives "null / null". (With stock kernel everything works)
You tried other modems ?
Sent from my GT-I8160
Rox said:
You tried other modems ?
Sent from my GT-I8160
Click to expand...
Click to collapse
No, I didn't because I don't have the possibility ATM
BTW all the other kernels I have tried didn't give me this issue.
Sent from my GT-I8160 using xda app-developers app
Hello, I have Xperia S with the latest firmware 6.2.B.1.96, which I have root using the Doomlord method, and then TA Backup my DRM keys.
And now, I want to flash Slimbean on it, and regarding to this thread, I need to flash the official kernel first before flashing the rom? since I'm using the Sony stock firmware? or I don't need to?
Thanks.
You need to unlock your bootloader
Sent from my LT26i using XDA Premium 4 mobile app
abdulkadiro said:
You need to unlock your bootloader
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah yes, I know I have to unlock my bootloader before installing a custom rom, but just wanted to make sure I have done everything before installing Slimbean, like whether or not I should flash this kernel first before proceeding or not since I already have the latest stock firmware on my XS?
Thanks.
Hi,
Yes. You need to flash the kernel before proceeding.
Extract the Kernel from zip file(ROM) and flash it.
Regards,
Chandru.
chandru155 said:
Hi,
Yes. You need to flash the kernel before proceeding.
Extract the Kernel from zip file(ROM) and flash it.
Regards,
Chandru.
Click to expand...
Click to collapse
Um, by kernel you mean boot.img right? Which one? From the Slim-nozomi-4.2.2.build.8-OFFICIAL.zip or Kernel from OFFICIAL release build 2.5 ?
Oh, I'm trying to find Gapps for this ROM from the slimbean website, but just couldn't find the 4.2.2 version for this ROM..
Thanks!
Guys, would like a Kernel for ace 2 because I did the upgrade to 4.2 and now the phone keeps crashing in a matter of games and music, can someone provide me the rom I'm using is the stock, thank you
4.2? 4.1.2? You on TC cm10.1 or stock 4.1?
Sent from my GT-I8160 using Tapatalk
teddytsen said:
4.2? 4.1.2? You on TC cm10.1 or stock 4.1?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
sorry rom stock 4.1.2
Change extension of your stock rom .md5 file to .zip then extract kernel.bin.md5
Connect phone to pc in download mode
Click PDA in Odin
Locate and select extracted kernel.bin.md5
Start
Wait until its done(should take about 10 sec)
Finish
Sent from my GT-I8160 using Tapatalk
teddytsen said:
Change extension of your stock rom .md5 file to .zip then extract kernel.bin.md5
Connect phone to pc in download mode
Click PDA in Odin
Locate and select extracted kernel.bin.md5
Start
Wait until its done(should take about 10 sec)
Finish
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
Friend, Please I need the kernel for ace 2 (i8160L) you can send me please?
vitoraugusto2007 said:
Friend, Please I need the kernel for ace 2 (i8160L) you can send me please?
Click to expand...
Click to collapse
i dont have L varient fw , which do you use?
teddytsen said:
i dont have L varient fw , which do you use?
Click to expand...
Click to collapse
Mine is 8160 L, but can I install another will not give me no problems
vitoraugusto2007 said:
Mine is 8160 L, but can I install another will not give me no problems
Click to expand...
Click to collapse
Friend then please help me to install a customizable rom for my I8160L has sent me as a tutorial to teach me to install. I'm from Brazil and here it is very difficult to have that staff ace 2 (8160L) I'll be very grateful.
vitoraugusto2007 said:
Friend then please help me to install a customizable rom for my I8160L has sent me as a tutorial to teach me to install. I'm from Brazil and here it is very difficult to have that staff ace 2 (8160L) I'll be very grateful.
Click to expand...
Click to collapse
replace tee folder from your phone's /system/lib to /system/lib in the custom rom you want to flash(i.e lets say cm10.2)
I have ported a MIUI v7 rom for the s4 mini gt-i9195 lte. I was able to flashed it succesfully with TWRP recovery but i am stuck at boot logo If someone know how to fix this, please reply maybe we can have a MIUI v7 rom for our phones.
serti6610 said:
I have ported a MIUI v7 rom for the s4 mini gt-i9195 lte. I was able to flashed it succesfully with TWRP recovery but i am stuck at boot logo If someone know how to fix this, please reply maybe we can have a MIUI v7 rom for our phones.
Click to expand...
Click to collapse
Which device using ported from?
I ported an old version of this Rom
http://forum.xda-developers.com/gal.../kkmiui7-i9200-i9205-i9208-aabyebaby-t3363061
And it was fine
U need cm11 kernel (not boot.img)and snd_soc_msm_2c file . That's it. It should boot without any problems.
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
Which device using ported from?
I ported an old version of this Rom
http://forum.xda-developers.com/gal.../kkmiui7-i9200-i9205-i9208-aabyebaby-t3363061
And it was fine
U need cm11 kernel (not boot.img)and snd_soc_msm_2c file . That's it. It should boot without any problems.
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
i have used slimkat rom for base. so will cm11 kernel work?
what is this file ? snd_soc_msm_2c file, and where can i get it
serti6610 said:
i have used slimkat rom for base. so will cm11 kernel work?
what is this file ? snd_soc_msm_2c file, and where can i get it
Click to expand...
Click to collapse
Oh u ported using patchrom. Those file was if u ported from galaxy mega 6.3 mini v7 rom.
You should take a logcat than only any help will rise
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
Oh u ported using patchrom. Those file was if u ported from galaxy mega 6.3 mini v7 rom.
You should take a logcat than only any help will rise
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
no i dont know about patchrom that much. but it is from galaxy mega miui v7 rom. that i ported, yes your rom i see it now. sory for the delay im just awake haha
DarkFrenzy said:
Oh u ported using patchrom. Those file was if u ported from galaxy mega 6.3 mini v7 rom.
You should take a logcat than only any help will rise
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
but if im right now, i need to flash cm11 kernel first after flash the port rom ?
serti6610 said:
but if im right now, i need to flash cm11 kernel first after flash the port rom ?
Click to expand...
Click to collapse
If u gonna port mega miui v7 rom using first flash Rom then flash kernel then flash snd folder of any stock or cm rom it's in etc folder
If u don't have anykernel zip of cm11 or skimkat
U should extract miui v7 boot.img and replace images of miui with cm11 zimage and pack it (u know this)
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
If u gonna port mega miui v7 rom using first flash Rom then flash kernel then flash snd folder of any stock or cm rom it's in etc folder
If u don't have anykernel zip of cm11 or skimkat
U should extract miui v7 boot.img and replace images of miui with cm11 zimage and pack it (u know this)
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
Thankyou for the info. I have tryed like you exactly said but no luck still stuck at boot logo :crying: I have also tryed and used CM11 as base but that would also not work. Any ideas, is it the updater script or boot.image thats is causing this