Develop Bugs

CM10 ~ Stock JB?

Hello folks
Small question: if I want to have CM10 or based rom in my GA2, I must flash stock JB firmware? If "yes" what firmware I must flash. Thanks

I would say you have to flash mf1 or me7 and then flash cm10 but u need to flash cmw to flash cm10 just notice
Sent from my GT-I9100 using xda app-developers app

Ok, but when I'm upgrading to official JB MF1 from GB my phone stuck on Samsung bootlogo. Can You give me some steps for newbie to update it to JB and then to CM10? Thanks

str3tch72 said:
Ok, but when I'm upgrading to official JB MF1 from GB my phone stuck on Samsung bootlogo. Can You give me some steps for newbie to update it to JB and then to CM10? Thanks
Click to expand...
Click to collapse
You have 600+ posts and 119 thanks and call yourself a newbie?

Yup, it's my first Samsung device, and I want to try CM
Sent from my GT-I8160 using xda app-developers app

if you stuck on samsung logo clear data cache factory reset on cwm
edit : did you check this
http://forum.xda-developers.com/showthread.php?t=2118119

I think best way for me to stay on GB
Sent by scream of silence.

U should flash xxmc8 jb firmware if u want harald's cm10.
It's not a hard task.
1- download odin
2- download xxmc8 firmware (from sam mobile)
3- extract the file downloaded from sam mobile
4- flash it via odin as pda part
5- download cm10 (i prefer harald's version)
6-flash it via temporary cwm (see roms thread about installation process).
Any help needed? Just ask.
Sent from my GT-I8160 using xda premium

how to install this rom?

hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks

roberto96.rr said:
hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks
Click to expand...
Click to collapse
No just install twrp for kitkat and flash rom as instructed.
Sent from my P6-U06 using xda app-developers app

roberto96.rr said:
hi there! last day i saw this rom http://forum.xda-developers.com/showthread.php?p=51201303 and i wanted to prove it. Right now i have the hyd52rom JB installed. What do i have to do for installing it? On the post says that i have to install twrp recovery for kitkat, but im on jb. Do i have to first install kitkat and then the twrp? Thanks
Click to expand...
Click to collapse
Sorry i find out updating from jb will have some issues. So please flash kitkat beta than only flash omni rom. Thanks
Sent from my P6-U06 using xda app-developers app

husen4u said:
No just install twrp for kitkat and flash rom as instructed.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Well.. i think i have a problem because i dont know how to do all that of bootloader and that things. When i installed my actual rom, i did it looking some forums, but right now i dont find them... Could someone help me please? Thanks

[STOCK ROM][FTF] Xperia ZL (C6506) 10.4.1.B.0.101 R1C Generic US

Here's the Generic North America 4.3 release for Sony. It's untouched, just zipped to pare it down to ~ 450mb chunks.
I've tested this by flashing it to my own device. Even with that, I don't guarantee this to work for you.
If you're locked boot loader, you'll want to look at Nuts thread elsewhere for files to help you stay rooted.
If you're Unlocked boot loader, you can flash this, then flash a kernel with a build-in recovery and root using the update-su file found elsewhere on XDA, then flash the kernel from this FTF again once you're rooted.
C6506_10.4.1.B.0.101_1270-7584 Generic US.zip part 1
C6506_10.4.1.B.0.101_1270-7584 Generic US.zip part 2

Thanks for this! Now will just wait for Nut's or someone who can make a rooted zip and stripped ftf for flashing...
Sent from my C6506 using XDA Premium 4 mobile app

Worked great.... Now I am in no rush for 4.4

Stupid question, but how do you flash a 2 part Rom in flash tool?
Sent from my C6506 using XDA Premium 4 mobile app

captaink85 said:
Stupid question, but how do you flash a 2 part Rom in flash tool?
Sent from my C6506 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Carefully...or not. Extracting the first zip will create a single FTF file to flash from the 2 zips.

So basically just unzip the 1st folder and that will open the 2nd zip which will create the single ftf?
Sent from my C6506 using XDA Premium 4 mobile app

The zip program should be able to detect that it is a multi-part split zip file and automatically treat the two parts as a single zip file.
7-Zip supports this, if you don't already have a zip program.

Yeah, download both, and use 7zip to decompress and you should be golden. I'd have put it up as a single file, but that method of sharing files is limited to ~ 450mb files....
Sent from my TouchPad using Tapatalk

My only issues I am having would be the auto focus on "words". Sometimes it will work well and sometimes it won't ... don't think it's as good as .569.... battery life seems a little bit better... pretty good overall....

Is there a place I can get all the firmware new and old I remember there was a site that did charge money and other sites where it was free.
Sent from my C6506 using xda app-developers app

Torres77an said:
Is there a place I can get all the firmware new and old I remember there was a site that did charge money and other sites where it was free.
Sent from my C6506 using xda app-developers app
Click to expand...
Click to collapse
Any particular version you're looking for?

scifan said:
Any particular version you're looking for?
Click to expand...
Click to collapse
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.

Torres77an said:
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.
Click to expand...
Click to collapse
I definitely don't have that...
I want to say it was 1.67 when I first started working with my 6506... and well, mine was a generic without contract...
Sent from my TouchPad using Tapatalk

Torres77an said:
I want to start with the Bell C6506 4.1 then at least I can flash that back for warranty purposes but then I can root it and flash a pre-rooted 4.3 stock Rom from there.
Click to expand...
Click to collapse
No contact but mostly I want the 4.1 so I can root it then update it even if it was a generic firmware I could still use it.
Sent from my C6506 using xda app-developers app

scifan said:
I definitely don't have that...
I want to say it was 1.67 when I first started working with my 6506... and well, mine was a generic without contract...
Sent from my TouchPad using Tapatalk
Click to expand...
Click to collapse
Ok so I'm now Rooted on 4.1 TELCEL with DoalRecovery with PhilZ Touch 6.26.6 & Clockworkmod now I joust need a preRooted 4.3 stock rom to flash
the firmware on that page for downlod don't happen to be rooted do they ? I'ma go take a look at the in the Developer section it should be around I've already done this sort of thing on the Xperia T before but I had lost that phone and found a good deal on the ZL.

hey guys,
im new at sony stuff, so some things are very different to samsung... i just unlocked my bootloader and tested some roms, but im missing all the sony stuff which´s in the stock roms. could you pls. help me to get back to the stock rom, i duno where to download the official austria/german sony firmware for my phone - flash with flashtool???

sry, dp! delete pls.

I just unlocked a new Xperia ZL c6506 locked to Claro Puerto Rico. The bloatware on the device is too much, can someone help me with the steps to load a stock android on it ?

[TOOL][WINDOWS] FLASH boot and recovery

FLASH​
A small windows batch tool to easily select from different recoveries or boot images and flash them.
Pre-Requisites​1. Adb debugging enabled
Click to expand...
Click to collapse
Features​
Flash boot and recovery images
Really small portable tool ~1MB
multiple images selectable from list
Click to expand...
Click to collapse
XDA:DevDB Information
FLASH boot and recovery, Tool/Utility for the Moto G 2014
Contributors
mnishamk
Version Information
Status: Stable
Current Stable Version: v1.2
Created 2014-10-24
Last Updated 2014-10-24

Download
head over to downloads section
Changelog
Code:
[COLOR="Red"]v1.2[/COLOR]
minor edits
bug fix
[COLOR="red"]v1.1[/COLOR]
initial release

This tool makes the job easy bro....thanx...I flashed twrp using your tool...

Nice

Does bootloader need to be unlocked first?

joel-n1 said:
Does bootloader need to be unlocked first?
Click to expand...
Click to collapse
bootloader need to be unlock for flashing custom recovery

Very useful tool. Thanks a lot

bluepower said:
Very useful tool. Thanks a lot
Click to expand...
Click to collapse
Where is the download link???
And can it be used to flash stock boot.img and recovery.img files so that we can get ota on our device...
I have a 1068 international 16gb device with custom recovery, custom kernel...
Sent from my XT1068 using XDA Free mobile app

vinaybaboo said:
Where is the download link???
And can it be used to flash stock boot.img and recovery.img files so that we can get ota on our device...
I have a 1068 international 16gb device with custom recovery, custom kernel...
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
It's a Dev Db project so, you may have to see the online version, instead of from the app. I've added a link to redirect there.
I think so, yes. But i don't think it will do any good. AFAIK, ota can't be done if you have an unlocked bootloader.

mnishamk said:
It's a Dev Db project so, you may have to see the online version, instead of from the app. I've added a link to redirect there.
I think so, yes. But i don't think it will do any good. AFAIK, ota can't be done if you have an unlocked bootloader.
Click to expand...
Click to collapse
Thanks man... Appreciate it... :thumbup:
Sent from my XT1068 using XDA Free mobile app

any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app

amritmalviya said:
any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
None so far, you'll have to go to the site and follow instructions to do that

amritmalviya said:
any tool for unlocking bootloader?
Sent from my XT1068 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/moto-g-2014/general/super-easy-bootloader-unlocker-using-t2945654
Haven't tried it though,its got relock issues. Use at your risk

Can someone please provide the stock recovery img?

request
@mnishamk
i would like to request a similar tool for kernel which could easily backup and restore kernels on our phone.
only if your time permits and if you believe it would be useful.
thank you

Harsh.gundecha said:
@mnishamk
i would like to request a similar tool for kernel which could easily backup and restore kernels on our phone.
only if your time permits and if you believe it would be useful.
thank you
Click to expand...
Click to collapse
i don't do much on windows nowadays,. sorry

Ixnsjjd

Help me flashing custom rom?

Hello to everyone.I just started this topic cuz I want someone to guide me to flash my phone.
First of all I have the Optimus g pro e986.And it runs the kit Kat 4.4.2 and it's rooted.
But I dont know how to start and wich quide should I follow...
Sent from my LG-E986 using Tapatalk

how can I unlock the bootloader safely when I'm on Kitkat?

Vamire said:
how can I unlock the bootloader safely when I'm on Kitkat?
Click to expand...
Click to collapse
Just follow this guide

And after this step can I flash any custom ROM?Can I flash back the official KitKat?And if so how? Thank you
Sent from my LG-E986 using Tapatalk

Vamire said:
And after this step can I flash any custom ROM?Can I flash back the official KitKat?And if so how? Thank you
Sent from my LG-E986 using Tapatalk
Click to expand...
Click to collapse
After those steps, you can flash any custom rom. You can always return back to stock kitkat, just follow this guide.

Thank you so much.Now any advice for lollipop ROM?I need something like official android.
Sent from my LG-E986 using Tapatalk

Vamire said:
Thank you so much.Now any advice for lollipop ROM?I need something like official android.
Sent from my LG-E986 using Tapatalk
Click to expand...
Click to collapse
Try this rom.

May I ask you something else? How can I flash the kernel? Or is not needed to flash a kernel?Also the rom that you give to me dosen't say anything about gpro e986 is it safe to flash it?