Develop Bugs

[Q] HTC One S-Off, and Unlocked boot looping

Hello,
I have accidentally flashed a GSM rom on my CDMA device(I know stupid of me), and I also did not take a nandroid(very stupid of me). I have access to Recovery, Bootloader, Fastboot, and Adb Sideload. I have tried Sideloading a rom, but I get "This package is for "m7wlv,m7vzw" devices; this is a "m7""
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.13.41.0109_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.605.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA37TS914979
(bootloader) imei: 990004281570899
(bootloader) meid: 99000428157089
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4006mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
I have tried everything, and I'm pulling at straws here. Help would be super appreciated, and I'd owe you for a lifetime!
Thanks,
Have a wonder night!

I would grab one of Hawk's stock Roms and flash it in philz's recovery.
But it sounds like your CID or something is screwed up.

GrayTheWolf said:
I would grab one of Hawk's stock Roms and flash it in philz's recovery.
But it sounds like your CID or something is screwed up.
Click to expand...
Click to collapse
I ended up fixing it with an RUU I found, however, when I try to install Viper 6.1.0 it successfully installs, but just boot loops. It will get to the htc logo, and just reboot.

meatwad63 said:
I have tried Sideloading a rom, but I get "This package is for "m7wlv,m7vzw" devices; this is a "m7""
Click to expand...
Click to collapse
I think you're using the wrong recovery, make sure that you've downloaded the the m7vzw version. I made this mistake the first time I went to download CWM.

meatwad63 said:
I ended up fixing it with an RUU I found, however, when I try to install Viper 6.1.0 it successfully installs, but just boot loops. It will get to the htc logo, and just reboot.
Click to expand...
Click to collapse
Do you mind giving the steps on how you fixed this problem? I am getting the same error you had in your OP and can't seem to get anything to work.
Thanks

[RESOLVED] Baseband Version/IMEI unknown

Hi friends,
I hope you guys are able to help, I have spent the whole day trying to fix my phone. So it all started when I flashed a radio that didn't work (I had SuperCID). After that, I tried different radios and flashed a radio that had the same version with my stock radio and none of them worked. So I decided to restore my phone to stock factory settings by downloading a stock backup from here (2.22.707.4 - TWRP Thanks to ckpv5) and the latest firmware from here (2.22.707.4_firmware.zip).
I flashed the firmware first twice, successfully and the restore the stock backup from TWRP and it got into a bootloop. However if i flash a custom GPE rom, it boots successfully but Baseband/IMEI becomes unknown.
I'm not sure what else to do now :crying:

I've tested installing a custom Sense based rom and GPE based rom, the Sense custom rom will get stuck in a boot loop but the custom GPE rom won't have issues. Except for the Baseband unknown version and IMEI unknown.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.2133156.UA10G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.22.707.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse

Good news!
I managed to resolved the issue by downloading the Taiwan (HTC__621 / 1.54.709.4): 1.15.2133156.UA14G_20.18n.4096.05L radio from http://forum.xda-developers.com/showthread.php?t=2736921
Before I flashed the radio, I had configured my phone to SuperCID 11111111. I didn't clear any caches after the flash, not sure if that matters.
I haven't checked on why Sense roms are boot looping but I'm happy with a GPE rom without any issues. So I'll just stick with that for the time being

CyanogenMod 14.1 ROM
Hi, I have installed turkey den m8 my phone m8 i am unable to use the overseas product phone anymore Baseband Version / IMEI unknown error please help

did you got a solution for this problem.. Even i have the same issue.
RedroseTR said:
CyanogenMod 14.1 ROM
Hi, I have installed turkey den m8 my phone m8 i am unable to use the overseas product phone anymore Baseband Version / IMEI unknown error please help
Click to expand...
Click to collapse
did you got a solution for this problem.. Even i have the same issue.

hcazzz said:
Good news!
I managed to resolved the issue by downloading the Taiwan (HTC__621 / 1.54.709.4): 1.15.2133156.UA14G_20.18n.4096.05L radio from http://forum.xda-developers.com/showthread.php?t=2736921
Before I flashed the radio, I had configured my phone to SuperCID 11111111. I didn't clear any caches after the flash, not sure if that matters.
I haven't checked on why Sense roms are boot looping but I'm happy with a GPE rom without any issues. So I'll just stick with that for the time being
Click to expand...
Click to collapse
Hi, am having same issue, i can't even get network on my phone, i tried going to the link to download the radio you mentioned. but unfortunately it has been removed by google. Please if you can upload the radio somewhere and share

morizhtc said:
Hi, am having same issue, i can't even get network on my phone, i tried going to the link to download the radio you mentioned. but unfortunately it has been removed by google. Please if you can upload the radio somewhere and share
Click to expand...
Click to collapse
what variant you have ???
you can't flash a random radio.img
you need the one compatible with your device variant
so what is your cid&mid ??
also what is your version main ?
better than that just post the result of fastboot getvar all after removing serialno and imei

ahmed.ismael said:
what variant you have ???
you can't flash a random radio.img
you need the one compatible with your device variant
so what is your cid&mid ??
also what is your version main ?
better than that just post the result of fastboot getvar all after removing serialno and imei
Click to expand...
Click to collapse
variant: sprint
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 123456789012
(bootloader) imei: 355195000000010
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mec_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ5****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s

morizhtc said:
variant: sprint
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mec_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0PAJ5****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5c9466dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.020s
Click to expand...
Click to collapse
you don't even have the m8 you have htc one e8 device
don't flash anything from this thread or forum search about your specific device forum
or search on htc website http://www.htc.com/us/support/rom-downloads.html#sprint

ahmed.ismael said:
you don't even have the m8 you have htc one e8 device
don't flash anything from this thread or forum search about your specific device forum
or search on htc website http://www.htc.com/us/support/rom-downloads.html#sprint
Click to expand...
Click to collapse
already tried that firmware for sprint e8 and it says unsupported rom type and i even downloaded lower versions of software too

morizhtc said:
already tried that firmware for sprint e8 and it says unsupported rom type and i even downloaded lower versions of software too
Click to expand...
Click to collapse
yeah there is an error on the website it redirect to a9 not e8
take a look at this thread and flash the latest RUU
https://forum.xda-developers.com/one-e8/development/ruu-sprint-htc-one-e8-1-22-651-1-stock-t2952981
you have a heavy modified device even the serialno,meid and imei have been modified
try with the linked thread it's for your device

ahmed.ismael said:
yeah there is an error on the website it redirect to a9 not e8
take a look at this thread and flash the latest RUU
https://forum.xda-developers.com/one-e8/development/ruu-sprint-htc-one-e8-1-22-651-1-stock-t2952981
you have a heavy modified device even the serialno,meid and imei have been modified
try with the linked thread it's for your device
Click to expand...
Click to collapse
already flashed about 2 roms from there and still the same
and if you notice the LINKS to the RUU firmwares takes to to that of HTC one M8 on htc official site

morizhtc said:
already flashed about 2 roms from there and still the same
and if you notice the LINKS to the RUU firmwares takes to to that of HTC one M8 on htc official site
Click to expand...
Click to collapse
The links are direct download for RUUs for your device
You need to sort it either by modify the android-info inside the RUU or revert the supercid and supermid to stock
Please if you have Any further question should be in the thread linked above
Sent from my HTC M8 using XDA Labs

ahmed.ismael said:
The links are direct download for RUUs for your device
You need to sort it either by modify the android-info inside the RUU or revert the supercid and supermid to stock
Please if you have Any further question should be in the thread linked above
Sent from my HTC M8 using XDA Labs
Click to expand...
Click to collapse
thanks for your reply

Can u please give me the Taiwan radio ? the links are dead and i badly need the radio..

HTC One A9 Unknown Baseband help please

[Q] M8 won't go past splash screen

HI guys, so I can't get my M8 to go past the splash screen. I've tried countless ROMs (even stock 4.4.2 from Android Revolution), all of which say they install fine, but nothing. Even when I restore a TWRP back-up it fails to boot. I'm S-ON and was rooted. I've tried wiping System, data, dalvik, cache, factory reset. Nothing happening.
Any ideas? I'm stumped ...

JustArchiee said:
HI guys, so I can't get my M8 to go past the splash screen. I've tried countless ROMs (even stock 4.4.2 from Android Revolution), all of which say they install fine, but nothing. Even when I restore a TWRP back-up it fails to boot. I'm S-ON and was rooted. I've tried wiping System, data, dalvik, cache, factory reset. Nothing happening.
Any ideas? I'm stumped ...
Click to expand...
Click to collapse
post your fastboot getvar all (minus IMEI and SerialNO) ..maybe their is a RUU for your device

clsA said:
post your fastboot getvar all (minus IMEI and SerialNO) ..maybe their is a RUU for your device
Click to expand...
Click to collapse
Will do ...

clsA said:
post your fastboot getvar all (minus IMEI and SerialNO) ..maybe their is a RUU for your device
Click to expand...
Click to collapse
Ok hold on. So I went to my phone this morning, and it's booted into Skydragon's 5.0.1 ROM, which I did try installing. 5.0.1 ... And I have no S-Off?? I didn't think this was possible?!

JustArchiee said:
Ok hold on. So I went to my phone this morning, and it's booted into Skydragon's 5.0.1 ROM, which I did try installing. 5.0.1 ... And I have no S-Off?? I didn't think this was possible?!
Click to expand...
Click to collapse
Although, I have no WiFi, and rebooting resulted in it getting stuck on the splash screen again ...

clsA said:
post your fastboot getvar all (minus IMEI and SerialNO) ..maybe their is a RUU for your device
Click to expand...
Click to collapse
By the way, fastboot Getvar -
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ************
(bootloader) imei: *************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

JustArchiee said:
By the way, fastboot Getvar -
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ************
(bootloader) imei: *************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
If I were you I'd go here http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
and start updating your firmware start with 1.54.401.10.zip and work you way up to the last one 3.29.401.9.zip.
Don't Skip any flash all 7 of them
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
After you get them all flashed I recommend TWRP 2.8.3.0 it's the newest and seems to be working Great for me.

clsA said:
If I were you I'd go here http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
and start updating your firmware start with 1.54.401.10.zip and work you way up to the last one 3.29.401.9.zip.
Don't Skip any flash all 7 of them
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
After you get them all flashed I recommend TWRP 2.8.3.0 it's the newest and seems to be working Great for me.
Click to expand...
Click to collapse
Ok cool thanks man i'll give it a try. But I didn't think you could get 5.0.x unless you have S-Off?

JustArchiee said:
Ok cool thanks man i'll give it a try. But I didn't think you could get 5.0.x unless you have S-Off?
Click to expand...
Click to collapse
yeah try the Nocturnal Limited Edition rom
http://forums.team-nocturnal.com/in...on-v207lrx22codexxtreme-audiojan-1st-2015★☆★/

clsA said:
yeah try the Nocturnal Limited Edition rom
http://forums.team-nocturnal.com/in...on-v207lrx22codexxtreme-audiojan-1st-2015★☆★/
Click to expand...
Click to collapse
ok cool so what do I do when all these are done? Unlock my bootloader and see what happens?

clsA said:
yeah try the Nocturnal Limited Edition rom
http://forums.team-nocturnal.com/in...on-v207lrx22codexxtreme-audiojan-1st-2015★☆★/
Click to expand...
Click to collapse
Ok so i've just flashed Android Revolution 6.1 (The 4.3 gpe one) and it's still doing then same thing. Only now the splash screen will stay on for 30 seconds or so, then vibrate, go black and do it again .... this is just silly

JustArchiee said:
ok cool so what do I do when all these are done? Unlock my bootloader and see what happens?
Click to expand...
Click to collapse
yes you'll have to unlock the bootloader to flash TWRP / then Root / Then Rom of your choice
---------- Post added at 11:44 AM ---------- Previous post was at 11:41 AM ----------
JustArchiee said:
Ok so i've just flashed Android Revolution 6.1 (The 4.3 gpe one) and it's still doing then same thing. Only now the splash screen will stay on for 30 seconds or so, then vibrate, go black and do it again .... this is just silly
Click to expand...
Click to collapse
your on the newest firmware now flash something newer like this
http://www.androidrevolution.org/downloader/download.php?file=One_M8_3.28.401.7_odexed.zip
and sunshine s-off your phone if you really want GPe

clsA said:
yes you'll have to unlock the bootloader to flash TWRP / then Root / Then Rom of your choice
Click to expand...
Click to collapse
So i've flashed a few roms, and nothing. It's now just stuck on the splash screen ..

JustArchiee said:
So i've flashed a few roms, and nothing. It's now just stuck on the splash screen ..
Click to expand...
Click to collapse
post your getvar all again
and list the roms you tried

Same issue as JustArchiee
I am having the exact same issue as the original post's user. My phone is stuck on the splash screen. I have tried a few different ROMS
1. Skydragon Sense ROM
2. insertcoin 6-0-6
3. Skydragon Asia WWE
I had a rooted lollipop rom, but that is having way too many issues. I have a backup of that ROM, but I dont want to get back to it. It is draining battery like crazy, has wifi issues
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.14.21331931.LA21G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: <blanked>
(bootloader) imei: <blanked>
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

Where to get latest firmware.zip for htc one m8

I have an htc one m8 ATT phone I want to install the ViperOneM8 5.02 rom on which says I need to update the firmware to a marshmellow firmware I think.
Or the latest.
While I have found some documentation how to do this on the net, I am not sure where I obtain these files.
The firmware.zip I believe it is
Help on this would be appreciated
Right now I am using hboot 3.16 and twrp 2.7

I found this link
http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html
https://www.androidfilehost.com/?w=files&flid=32780
and grabbed the 4.16.1540.8.zip but want to make sure I am grabbing the correct and latest version. Because I don't want to brick my phone

Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.

ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
I like TWRP. When its workable, its array of tools is superior to CWM. But after I tried 2.8.x, I decided CWM or TWRP at or below 2.7.0.2 is safer and less crash prone.
When I attempted to boot to recovery it would boot loop. Please be mindful of boot signing. If you so slightly make your OEM software notice things a fuse will make your phone implode.
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

furboom1240 said:
For some devices, TWRP 2.7 is recommended due to how older boot loaders may not take it well.
Click to expand...
Click to collapse
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP

ckpv5 said:
Read again what he is trying to do man ... he's going to update to Marshmallow firmware and that outdated TWRP 2.7 won't work for him (he can't even install his intended ViperOneM8 5.02 ROM with that outdated TWRP)
..... that's why I said don't use that outdated TWRP
Click to expand...
Click to collapse
Good point. For some odd reason CM pairs ROMs and Recoveries. If you check the Dev Auto update option would that be unnecessary.
It's been an itching question I actually had...
Sent from my HTC M8 GPE
? Mass Transit Honchkrow ?

I originally had twrp 2.8 on and tried to install the latest. But it was freezing because I think I need a newer version of hboot. which I have 3.16 on it.
I then downgraded to 2.7 to get it working. I installed ViperOnem8 Rom not reading the website successfully. but have issues with wifi, and 2 minute boot times.
"The 5.0.x ROM is based on HTC’s latest M8 Sense 7 Android 6.0.x base and requires you to update your firmware to at least the 6.0.x (Marshmallow) version! If you don’t you will run into some issues such as Wi-Fi not working or No Boot, etc.
We cannot install the firmware for you during ROM installation so you will need to take the steps to update the firmware on your own."
So I need to update my firmware. I have an ATT S-ON phone. But I have no clue where to get the firmware from, and make sure it is the right one and recent.
I need to update my firmware in order for this rom and a newer version of twrp to work correctly

ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
Now I am trying to install either Revolution Rom, or ViperOnem8 and both have the same problem. After install they keep booting into twrp and won't load.
I tried Cynamod and that installed and booted fine.
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?

Need advice
ckpv5 said:
Post your fastboot getvar all result without serial & imei no.
You may need a different firmware if it's AT&T & S-On and also don't use that outdated 2.7 TWRP.
Click to expand...
Click to collapse
This my phone info
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.21331147A1.14G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.34.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B67000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 260ae94e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Which RUU can I use ?

vertigo262 said:
ok, so
I upgraded to 3.11.1700.5 firmware I found. and that was successful.
Then I upgraded my twrp to twrp-3.0.2-0-m8 and that was successful
I believe both Revolution and Viper use the Aroma installer. Anyone know what is going on with these and a fix to stop it from booting into twrp?
Click to expand...
Click to collapse
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.

ckpv5 said:
Wrong firmware. You installed an old version of GPE firmware.
You can't install Sense ROM like Revolution and Viper on GPE firmware.
I asked you to post fastboot getvar all to help you but it seems that you made it harder now because you installed a wrong firmware. If it is S-Off, then it is easy to fix.
Click to expand...
Click to collapse
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

vertigo262 said:
sorry, I must have missed your response. was in phone hell world!
here it is.
this is what it was
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
this is now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.1700.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/

ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse
so your saying, install the ruu, update the firmware, then re install viper?
Can't I just update the firmware like I did before? It was S-On before I updated the firmware

The ruu won't install. it says needs more then 30% battery, yet it is fully charged

vertigo262 said:
so your saying, install the ruu, update the firmware, then re install viper?
Click to expand...
Click to collapse
No .. I don't say that ... read again ...
Flash firmware.zip first then RUU ...
or install ROM first, don't reboot the system, but reboot to bootloader, relock bootloader then flash firmware.zip
As you already flashed a wrong firmware, as I said this may work and may not work but the only way that you can try to fix the wrong firmware installed.
---------- Post added at 02:49 PM ---------- Previous post was at 02:49 PM ----------
vertigo262 said:
The ruu won't install. it says needs more then 30% battery, yet it is fully charged
Click to expand...
Click to collapse
Because you have wrong firmware installed.

but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with

vertigo262 said:
but with what firmware.zip? I never got the right firmware.zip to begin with so I don't have any firmware files to update with
Click to expand...
Click to collapse
That show you don't read all the posts that I posted .. the firmware.zip is posted in the post that earlier posted
You have to wait for someone else I guess who can write a post that you can understand .. maybe my English is not good enough ... good luck
ckpv5 said:
First - remove all serial & imei no. from your above post.
As I said, it is not easy to fix this with S-On device. What you can try is to install the latest AT&T 6.20.502.5 firmware first then run 6.20.502.5 RUU
Read this for the firmware and how-to : http://forum.xda-developers.com/showpost.php?p=66886759&postcount=23
You can get the RUU here : http://www.htc.com/us/support/htc-one-m8-att/news/
Click to expand...
Click to collapse

ok .. now that I understand what you are saying. because you had the RUU .exe and also were explaining how to update the firmware at the same time while the firmware was burried a couple of levels of posts, I didn't understand what you were saying.
so it looks like the firmware updated successfully
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I unlocked the firmware through the htc website with the Unlock_code.bin
because fastbook oem unlock didn't work.
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom

vertigo262 said:
had to reinstall twrp and that worked after reinstall. although lots of mounting file system errors. with /Data I don't know if that's normal.
seems to be fixed after formatting
Now I will try installing a rom
Click to expand...
Click to collapse
Now you got it.
And yes, after changing from GPE to Sense GSM (AT&T) firmware, you need to reinstall TWRP (the latest 3.0.2-0) and you MUST format data partition, in TWRP - select WIPE, Format Data - yes ... because GPE & Sense data partition is of different size.

Please where can i get compatible firmware for my htc one m8s with S.O 1.12.1405.6 . I have been on this over 3 weeks now but all no avail.

HTC One M8 return to stock s-on

I had previously put custom crDroid 7.1.1 . I've been trying to return to stock with s-on. I've tried methods from different threads on here specifically: https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
However, when I try retrieving the rom.zip file I get an invalid message. Any suggestions?
Here is my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

josh2124 said:
I had previously put custom crDroid 7.1.1 . I've been trying to return to stock with s-on. I've tried methods from different threads on here specifically: https://forum.xda-developers.com/htc-one-m8/general/guide-restore-european-htc-one-m8-to-t3072235
However, when I try retrieving the rom.zip file I get an invalid message. Any suggestions?
Here is my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.213311491.05G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Try using this RUU instead.
Scroll down to the Manual System Update Instructions and read them. The RUU download is at the end of the instructions.

I've tried that. Unfortunatley it doesn't work.

josh2124 said:
I've tried that. Unfortunatley it doesn't work.
Click to expand...
Click to collapse
Doesn't work how? "Doesn't work" doesn't help me/us to figure out what your issue is and how to fix it. When you run the RUU and it doesn't work, what error message are you getting?

it says, " The ROM Update Utility cannot connect to your Android Phone. Check your usb cable......."
I have the drivers installed

josh2124 said:
it says, " The ROM Update Utility cannot connect to your Android Phone. Check your usb cable......."
I have the drivers installed
Click to expand...
Click to collapse
Maybe you should have read to the bottom of the instructions in the link I gave you, where it says with your issue you should boot to bootloader/fastboot and run the RUU from there.

xunholyx said:
Maybe you should have read to the bottom of the instructions in the link I gave you, where it says with your issue you should boot to bootloader/fastboot and run the RUU from there.
Click to expand...
Click to collapse
I did and nothing worked

josh2124 said:
I did and nothing worked
Click to expand...
Click to collapse
Okay. In that case you should use the methods in this thread.

Thank you. Will give it a try and update

xunholyx said:
Okay. In that case you should use the methods in this thread.
Click to expand...
Click to collapse
Thank You so much. It Worked!!

josh2124 said:
I did and nothing worked
Click to expand...
Click to collapse
I know you fix your issue by now
But i have a question,have you relocked your bootloader before running the RUU.exe ?
Sent from my HTC M8 using XDA Labs

No I didn't

josh2124 said:
No I didn't
Click to expand...
Click to collapse
that's why the RUU didn't work for you
next time you need to use the RUU you should relock the bootloader first ( for s-on devices )
using this command
fastboot oem lock
then flash the RUU in fastboot mode ( use the same android version or higher ( for s-on devices )