Related
AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
chazbot7 said:
AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
Click to expand...
Click to collapse
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
BWolf56 said:
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Click to expand...
Click to collapse
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
chazbot7 said:
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
Click to expand...
Click to collapse
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
BWolf56 said:
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
Click to expand...
Click to collapse
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
chazbot7 said:
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
Click to expand...
Click to collapse
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
chazbot7 said:
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
Click to expand...
Click to collapse
No need to apologize. Glad you got it back up! And it was mostly to keep you from making similar mistakes in the future
Sent from my SGH-I747 using xda app-developers app
also one thing you need to know
First boot after you flash will always take longer than normal. After that, it's fine
HI guys so i have been at this for a few hours now i was going to update my roms to 4.2.2
did a full backup and then did a wipe and the problem started the roms was not good so installation was aborted. when i connected the computer to phone after putting it in download mode so i could load stock roms and then load up back up the computer doe not recognize the phone.
THe CWM version 5.5.0.4 does not allow me to look at my sd card for some reason.... is my phone done?
so the backup was saved on teh phone thats why i moved it using file explorer to sd card ...
any way i can talk to my phone well make my computer talk to my phone.....i know it used to connect to me computer with no issues.
systemdude2 said:
HI guys so i have been at this for a few hours now i was going to update my roms to 4.2.2
did a full backup and then did a wipe and the problem started the roms was not good so installation was aborted. when i connected the computer to phone after putting it in download mode so i could load stock roms and then load up back up the computer doe not recognize the phone.
THe CWM version 5.5.0.4 does not allow me to look at my sd card for some reason.... is my phone done?
so the backup was saved on teh phone thats why i moved it using file explorer to sd card ...
any way i can talk to my phone well make my computer talk to my phone.....i know it used to connect to me computer with no issues.
Click to expand...
Click to collapse
Your recovery version is pretty old, considering cwm 6.0.3.6 is the newest...
So is there anyway to fix this ?
Download ROM Manager from the PlayStore and let it install the latest CWM, or download GooManager and have it install TWRP.
So far as the computer, you'll need to be more specific about 'talk to'.
Might need drivers, might need a new cable, can't tell from what you said.
I think if he wiped already he wont be able to download from the play store, if im reading the OP correctly, you already wiped the device, you flashed the 4.2.2 or 4.2 and it aborted..correct?
Step 1. Okay here's what you can do since the PC isnt reading your phone, reboot or restart your pc put phone in odin/download mode and see if it reads it now. If it does Odin a stock rooted rom, then get goomanger from the play store and install open script recovery which will give you the twrp recovery, then you can attempt the flash again of the 4.2 based rom.
Step 2. If it still isnt reading after a pc restart load your old rom on an sd card and try to flash the old tw rom with that older cwm recovery and see if you can get back at least to a tw rom. If that doesnt work then pull the battery out your phone let it sit for 2min, put the battery back in and get into odin/download mode, and see if pc recognizes the device and connection, if it doesnt, download kies and it might help with the connection issue.
Did that help bro. Let me know?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Op stated the he made a full backup. Should be able to boot directly into recovery and restore the backup?
thanks for the info everyone . the operating system is gone so no luck on play store.
mrkevo3000 yes the roms got aborted half way its weird why it would do that.... my phone has always had issues.
just like that as i am typing this my phone is now recognized by odin so i will what you said load up stock and the reflash my backup and then update cwm.
I will try and update and againg to 4.2.2 and let you know what happens.
I have seen so many flavors any preference one somethiong that might work on i747m ?
ill update this after recovering my phone and attempting reflash.
Also for some reason my sd card is not recognized by cwm and it is only looking at internal again never did this to me before thats why i got stuck.
Last time i attempted a update for some reason my apn settings were locked and could not be changed.
I did the same stupid thing myself. Really can not believe I did it but i was rushing and didn't read what it was, thinking i was doing something else. Was not worried as I had my trusty nandriod backup -.- . I guess I can consider myself lucky as i took it to telus hoping they would buy my story and they sent it to the samsung repair center. Worried all week that if they checked it would be clear i had voided the warranty and i would be paying a high repair cost or buying a new phone. Well I got the phone back an hour ago and they fixed it.... no charge. I guess I can consider myself very lucky.
systemdude2 said:
thanks for the info everyone . the operating system is gone so no luck on play store.
mrkevo3000 yes the roms got aborted half way its weird why it would do that.... my phone has always had issues.
just like that as i am typing this my phone is now recognized by odin so i will what you said load up stock and the reflash my backup and then update cwm.
I will try and update and againg to 4.2.2 and let you know what happens.
I have seen so many flavors any preference one somethiong that might work on i747m ?
ill update this after recovering my phone and attempting reflash.
Also for some reason my sd card is not recognized by cwm and it is only looking at internal again never did this to me before thats why i got stuck.
Last time i attempted a update for some reason my apn settings were locked and could not be changed.
Click to expand...
Click to collapse
I would use odin 1.85 and odin a rooted stock 4.1.2 rom.. then go to the playstore and download goomanger and get the teamwin recovery, by hitting menu inside goomanger app, and installing the open script recovery which will install the teamwin recovery, you can flash any pure google rom with that recovery, before you do make a nandroid of your current setup and then flash away, get into a habit of doing at least one back and check the md5 hash of the roms before you flash away... download using your pc instead of phone browsers, sometimes mobile browsers corrupt the files.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Please need help eMMc dump for i747 At&t s3
danvee said:
Download ROM Manager from the PlayStore and let it install the latest CWM, or download GooManager and have it install TWRP.
So far as the computer, you'll need to be more specific about 'talk to'.
Might need drivers, might need a new cable, can't tell from what you said.
Click to expand...
Click to collapse
Hello good morning i am in need of your help. I need a eMMC dump of a rooted AT&T sgh i747
Run this as root from a working SGH-i747:
Code:
busybox dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=128
Please help me out really need the help. let me know if you can. Thank you for even reading my request.
Hi guys,
I had already suffered in the past for sudden reboots, but at least i was able to use the phone for a decent amount of time and fix it. After last night, though, the situation seems desperate. When i woke up i was able to turn off the alarm clock, check my email, but then hell started...
My phone is a gsm Nexus (maguro i9250), with CyanogenMod11 snapshot M5 and the appropriate google apps (at least they were appropriate about 1 month ago). I recently had some minor issue with the Google+ app, after it was updated: it kept crashing, until i uninstalled it and reinstalled after downloading from the Play Store. Should i instead search for a newer gapps packet?
Now the situation is pretty awful. The phone will reboot after at most 2 minutes. I don't really know what makes it crash so bad.
I also have two weird problems. Whatever change i manage to make before the phone reboots doesn't get persisted. For example, the alarm clock will always start activated, no matter if i managed to deactivate it before the reboot.
I'm also not able to reset it to factory defaults. I am using ClockworkMod 6.0.4.7. If i try the reset procedure, the /data and /cache partitions are formatted, but not the sdcard one. Indeed, i get the following output:
Code:
Formatting /data
Formatting /cache
Formatting /sd-ext
E: unknown volume for path [/sd-ext]
Formatting /sdcard/.android_secure
Data wipe complete
When i reboot the phone after this procedure, everything is still there, and the phone will keep doing its reboots after 1-2 minutes.
What can i do? Is there an hardware way to hard-reset the phone? Is there a program i could use?
Thanks in advance!
Fried EMMC (memory)
Sent from my Galaxy Nexus using XDA Free mobile app
mrgnex said:
Fried EMMC (memory)
Click to expand...
Click to collapse
Maybe, but if everything is still there after a reboot, sounds doubtful.
Have you tried installing a different rom? Can you connect via adb? Do you have a nandroid?
Format /system under Mounts and Storage in CWM and reflash ROM and GApps?
Hi guys, thanks for your replies! Sorry for the late answer, i was pretty busy.
I spent last night trying everything i could, but i think my phone is gone
I used Skipsoft's Android Toolkit and Odin, with no success.
The first one seemed to succeed: i tried twice, with two different stock roms, but i always ended up with the same CM11, same apps, same everything.
Odin always failed (i tried at least 3 times, i honestly lost the count).
I did find a post in the forums regarding a guy with my same problem, and he was told about the eMMC as well. I am pretty sure that is my problem as well.
Further proofs of that:
1) I downloaded the latest CM11 nightly build, was able to push its zip file on the device using Eclipse (i swear it was there), but when i tried to flash it using CWM, the file wasn't there.....
2) With Android Toolkit i was able to boot into a different recovery tool (TWM, i think). I wiped everything with it, and i was starting to hope.... but the same darn CM11 appeared!
I don't have a nandroid, i formatted everything i could in Mounts in CWM (i got to a point that i formatted everything that was formattable). I also tried to reflash the rom and gapps. No luck, always ended up with the same situation.
I didn't really try a different rom. I didn't try to connect using adb on the terminal, but i think that Eclipse is based on that, so i think adb is working.
Oh well... Right now i'm using an old phone, but i have started looking for a new one, i am tempted by the Nexus 5
frabena said:
Hi guys, thanks for your replies! Sorry for the late answer, i was pretty busy.
I spent last night trying everything i could, but i think my phone is gone
I used Skipsoft's Android Toolkit and Odin, with no success.
The first one seemed to succeed: i tried twice, with two different stock roms, but i always ended up with the same CM11, same apps, same everything.
Odin always failed (i tried at least 3 times, i honestly lost the count).
I did find a post in the forums regarding a guy with my same problem, and he was told about the eMMC as well. I am pretty sure that is my problem as well.
Further proofs of that:
1) I downloaded the latest CM11 nightly build, was able to push its zip file on the device using Eclipse (i swear it was there), but when i tried to flash it using CWM, the file wasn't there.....
2) With Android Toolkit i was able to boot into a different recovery tool (TWM, i think). I wiped everything with it, and i was starting to hope.... but the same darn CM11 appeared!
I don't have a nandroid, i formatted everything i could in Mounts in CWM (i got to a point that i formatted everything that was formattable). I also tried to reflash the rom and gapps. No luck, always ended up with the same situation.
I didn't really try a different rom. I didn't try to connect using adb on the terminal, but i think that Eclipse is based on that, so i think adb is working.
Oh well... Right now i'm using an old phone, but i have started looking for a new one, i am tempted by the Nexus 5
Click to expand...
Click to collapse
You can try by downloading a clean google factory image and then flash it using bootloader and see it helps, it could be a bad script inside. If this doesn't help then you should totally get the Nexus 5. I got GNex only recently and its still a good device I reassure you. A little tweak and a little overclock makes it as good as a stock N4 minus the bad graphics.
frabena said:
Hi guys, thanks for your replies! Sorry for the late answer, i was pretty busy.
I spent last night trying everything i could, but i think my phone is gone
I used Skipsoft's Android Toolkit and Odin, with no success.
The first one seemed to succeed: i tried twice, with two different stock roms, but i always ended up with the same CM11, same apps, same everything.
Odin always failed (i tried at least 3 times, i honestly lost the count).
I did find a post in the forums regarding a guy with my same problem, and he was told about the eMMC as well. I am pretty sure that is my problem as well.
Further proofs of that:
1) I downloaded the latest CM11 nightly build, was able to push its zip file on the device using Eclipse (i swear it was there), but when i tried to flash it using CWM, the file wasn't there.....
2) With Android Toolkit i was able to boot into a different recovery tool (TWM, i think). I wiped everything with it, and i was starting to hope.... but the same darn CM11 appeared!
I don't have a nandroid, i formatted everything i could in Mounts in CWM (i got to a point that i formatted everything that was formattable). I also tried to reflash the rom and gapps. No luck, always ended up with the same situation.
I didn't really try a different rom. I didn't try to connect using adb on the terminal, but i think that Eclipse is based on that, so i think adb is working.
Oh well... Right now i'm using an old phone, but i have started looking for a new one, i am tempted by the Nexus 5
Click to expand...
Click to collapse
Well I got bad news well not really bad but kinda. If you wiped efs data while you were wiping your phone will never properly connect to the network anymore. That obviously won't matter unless you somehow get out of this bootloop.
i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?
Linx78 said:
i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?
Click to expand...
Click to collapse
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.
dladz said:
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.
Click to expand...
Click to collapse
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.
Linx78 said:
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.
Click to expand...
Click to collapse
Ask in the forum mate, where u got the rom from.
dladz said:
Ask in the forum mate, where u got the rom from.
Click to expand...
Click to collapse
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...
Linx78 said:
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...
Click to expand...
Click to collapse
You will have to have downloaded the rom from xda surely? The Rom you downloaded initially I assume was cm 12.1, then you updated to cm 13, that thread is in the original android development section, I'm sure you can find your way there as you've been there before. The thread is now called cm13 I believe..
Also make sure you're on the latest TWRP recovery, I'm guessing you are but it'd be nice to be sure.
Might also be worth downloading G apps from the cm13 thread then rebooting to recovery, flashing the rom again and installing gapps whilst once complete, don't allow a reboot.
Wiping cache and dalvic will be fine, don't perform a full wipe just incase you can't install the rom again.
If you get stuck, you can push files to your phone using recovery and the push command..
Not 100% but I think storage works via TWRP, could be wrong about that and I've not tested it with cm13.
Either way you have a way back..
---------- Post added at 06:55 PM ---------- Previous post was at 06:55 PM ----------
Install from your internal memory not your SD card. Get the necessary files on your internal memory instead.
thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted
Linx78 said:
thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted
Click to expand...
Click to collapse
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...
Linx78 said:
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...
Click to expand...
Click to collapse
No it'a not bricked..
Are you installing from internal or external memory?
Connect your phone to your computer and go to recovery, then mount storage in recovery, copy G apps to internal memory.
Make more posts in here, i think you need ten
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.
Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.
dladz said:
Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.
Click to expand...
Click to collapse
sorry, i did copy everything onto internall memory, still no luck...
also the cm13 updated the recovery aswell, and i can't even do a factory reset...
please is there a way to go back to cm12.1?
once again i can't install anything in recovery mode.
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
that wasn't my post, some else posted here too...
i'm stuck, adb won't install anything too
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.
Click to expand...
Click to collapse
i wanted to ask how to go back to cm12.1 from cm13?
i don't have any backups, nor my recovery is allowing to install anything as per post above...
adb method is not working either, just says waiting for the device when rebooted to download and nothing else.
also my firmware is 2.10..... is that an issue?
dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens
Linx78 said:
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens
Click to expand...
Click to collapse
Nah i'm on 2.10 that's fine.
At this point it appear to be an issue with CM13 rather than anything else, I'm not up to speed with Android 6.0 so I think it would be best if you asked in the thread, you've made over 10 posts now so i'm assuming you can post there.
See what they say, let them know what you've done so far, someone will have either been through it or will know what to do.
Sorry i can't be of more help mate.
PS: Just thought of something, if you have connectivity to your computer / laptop, update your recovery if you haven't already, chances are it's an issue with cm13 but might be worth a try.
I had similar problem - Google Services crashing after unintentional update to CM13.
I realized that I need to install new GApps to fix the issue but GApps installation in recovery was constantly failing.
I used to have some recovery there, I even don't know which one, but during update to CM13 the recovery has been changed to some kind of CM recovery.
After installing TPRW recovery (ir forked for me from the TPRW Manager App from play store) I was able to install Nano GApps.
It solved the issue with Google Services crashing, now I got some Wizard crashing. The issue with crashing wizard is solved by going to privacy setting and allowing the wizard all rights. Later I realized that many other applications were crashing on start as well. I solved it for each of them by uninstalling and installing from Play Store again.
I picked up a sprint htc one m9 today. unfortunately no stock OS and no SD CARD with backup either. I booted into twrp but i can not do anything. everything fails. i tried to flash a rom and its a no go. I am stuck and have no idea what to try after looking for hours.
I have no OS
I can boot into twrp
twrp does not allow me to do anything FAILS on every operation.
zwp1990 said:
I picked up a sprint htc one m9 today. unfortunately no stock OS and no SD CARD with backup either. I booted into twrp but i can not do anything. everything fails. i tried to flash a rom and its a no go. I am stuck and have no idea what to try after looking for hours.
I have no OS
I can boot into twrp
twrp does not allow me to do anything FAILS on every operation.
Click to expand...
Click to collapse
Foremost: ugh. Sorry man - that sucks.
So it sounds like your best option would be to get an sd card and apply a RUU from there. Flippy498's Google Sheet is a great resource for where to get them and how to use them.
You might be able to use the Windows-executable RUU directly from Sprint. I'm pretty sure you'd need to be in download mode when you ran it though. It's not as straightforward as the sd card method, but they're usually my first fallback.
Keep in mind that both of these options are destructive - your phone will be brought to a factory state (stock firmware, recovery) and anything on the phone's internal memory will be wiped.
It might be worth exploring why TWRP keeps failing. If we could solve that, you could install the ROM of your choice and not worry about RUUs. But that's definitely more work and probably not necessary if you're not trying to save anything. Once the RUU has been successfully applied, you can just unlock the bootloader anew, install TWRP, and do whatever you want from there.
Thanks a ton that fixed it!
zwp1990 said:
Thanks a ton that fixed it!
Click to expand...
Click to collapse
Wonderful! Enjoy your new phone!
(If you're satisfied with the resolution, the convention in this forum is to mark a thread 'solved' in the title when an issue is resolved. This'll help folks know where to direct their help.)