[Q] soft bricked maybe hard bricked need some help - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

HI guys so i have been at this for a few hours now i was going to update my roms to 4.2.2
did a full backup and then did a wipe and the problem started the roms was not good so installation was aborted. when i connected the computer to phone after putting it in download mode so i could load stock roms and then load up back up the computer doe not recognize the phone.
THe CWM version 5.5.0.4 does not allow me to look at my sd card for some reason.... is my phone done?
so the backup was saved on teh phone thats why i moved it using file explorer to sd card ...
any way i can talk to my phone well make my computer talk to my phone.....i know it used to connect to me computer with no issues.

systemdude2 said:
HI guys so i have been at this for a few hours now i was going to update my roms to 4.2.2
did a full backup and then did a wipe and the problem started the roms was not good so installation was aborted. when i connected the computer to phone after putting it in download mode so i could load stock roms and then load up back up the computer doe not recognize the phone.
THe CWM version 5.5.0.4 does not allow me to look at my sd card for some reason.... is my phone done?
so the backup was saved on teh phone thats why i moved it using file explorer to sd card ...
any way i can talk to my phone well make my computer talk to my phone.....i know it used to connect to me computer with no issues.
Click to expand...
Click to collapse
Your recovery version is pretty old, considering cwm 6.0.3.6 is the newest...

So is there anyway to fix this ?

Download ROM Manager from the PlayStore and let it install the latest CWM, or download GooManager and have it install TWRP.
So far as the computer, you'll need to be more specific about 'talk to'.
Might need drivers, might need a new cable, can't tell from what you said.

I think if he wiped already he wont be able to download from the play store, if im reading the OP correctly, you already wiped the device, you flashed the 4.2.2 or 4.2 and it aborted..correct?
Step 1. Okay here's what you can do since the PC isnt reading your phone, reboot or restart your pc put phone in odin/download mode and see if it reads it now. If it does Odin a stock rooted rom, then get goomanger from the play store and install open script recovery which will give you the twrp recovery, then you can attempt the flash again of the 4.2 based rom.
Step 2. If it still isnt reading after a pc restart load your old rom on an sd card and try to flash the old tw rom with that older cwm recovery and see if you can get back at least to a tw rom. If that doesnt work then pull the battery out your phone let it sit for 2min, put the battery back in and get into odin/download mode, and see if pc recognizes the device and connection, if it doesnt, download kies and it might help with the connection issue.
Did that help bro. Let me know?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Op stated the he made a full backup. Should be able to boot directly into recovery and restore the backup?

thanks for the info everyone . the operating system is gone so no luck on play store.
mrkevo3000 yes the roms got aborted half way its weird why it would do that.... my phone has always had issues.
just like that as i am typing this my phone is now recognized by odin so i will what you said load up stock and the reflash my backup and then update cwm.
I will try and update and againg to 4.2.2 and let you know what happens.
I have seen so many flavors any preference one somethiong that might work on i747m ?
ill update this after recovering my phone and attempting reflash.
Also for some reason my sd card is not recognized by cwm and it is only looking at internal again never did this to me before thats why i got stuck.
Last time i attempted a update for some reason my apn settings were locked and could not be changed.

I did the same stupid thing myself. Really can not believe I did it but i was rushing and didn't read what it was, thinking i was doing something else. Was not worried as I had my trusty nandriod backup -.- . I guess I can consider myself lucky as i took it to telus hoping they would buy my story and they sent it to the samsung repair center. Worried all week that if they checked it would be clear i had voided the warranty and i would be paying a high repair cost or buying a new phone. Well I got the phone back an hour ago and they fixed it.... no charge. I guess I can consider myself very lucky.

systemdude2 said:
thanks for the info everyone . the operating system is gone so no luck on play store.
mrkevo3000 yes the roms got aborted half way its weird why it would do that.... my phone has always had issues.
just like that as i am typing this my phone is now recognized by odin so i will what you said load up stock and the reflash my backup and then update cwm.
I will try and update and againg to 4.2.2 and let you know what happens.
I have seen so many flavors any preference one somethiong that might work on i747m ?
ill update this after recovering my phone and attempting reflash.
Also for some reason my sd card is not recognized by cwm and it is only looking at internal again never did this to me before thats why i got stuck.
Last time i attempted a update for some reason my apn settings were locked and could not be changed.
Click to expand...
Click to collapse
I would use odin 1.85 and odin a rooted stock 4.1.2 rom.. then go to the playstore and download goomanger and get the teamwin recovery, by hitting menu inside goomanger app, and installing the open script recovery which will install the teamwin recovery, you can flash any pure google rom with that recovery, before you do make a nandroid of your current setup and then flash away, get into a habit of doing at least one back and check the md5 hash of the roms before you flash away... download using your pc instead of phone browsers, sometimes mobile browsers corrupt the files.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Please need help eMMc dump for i747 At&t s3
danvee said:
Download ROM Manager from the PlayStore and let it install the latest CWM, or download GooManager and have it install TWRP.
So far as the computer, you'll need to be more specific about 'talk to'.
Might need drivers, might need a new cable, can't tell from what you said.
Click to expand...
Click to collapse
Hello good morning i am in need of your help. I need a eMMC dump of a rooted AT&T sgh i747
Run this as root from a working SGH-i747:
Code:
busybox dd if=/dev/block/mmcblk0 of=/sdcard/debrick.img bs=1M count=128
Please help me out really need the help. let me know if you can. Thank you for even reading my request.

Related

Stuck @ Google Log Screen

Was running a Rotted stock Rom which is flashed with CWM. All was fine until i tried to install Google official 4.2.1 update. That messed up something and now i cant get it to boot. I wiped everything in CWM but nothing. Also been trying to connect it to PC to transfer a new ROM but i dont know why the mount sdcard option is not working.
1) you were not on a 100% stock rom, so dont ever take a OTA
2) the mount sdcard will never work on this phone as there is no sdcard
3) do yourself a favor and follow this (it even has a section on how to root your phone): http://forum.xda-developers.com/showthread.php?t=1626895
Restore
Try this it has always worked for me and I have bricked my phone many, many times. I find this to be so much easier than all the other ways out there, but that's just me.
http://forum.xda-developers.com/showthread.php?t=1426207
Thanks for the help. I turned it back to stock and all good now.

I need help on re-installing stock ROGERS rom.

Ive been on ICS/JB for a while, but my battery started to swell and i need to flash back the stock rogers rom.
Ive download from samfirware the only rogers rom.
I put it in the PDA slot of Odin3 and everything works.
When the phone reboots i get an error: Can't access /system/csc/att
And the phone reboots to the samsung logo and nothing more.
I tried using the famous oneclick we had for the leak ICS and this one works good. Only the 2.3 from rogers that fails.
Nevermind, the dude at rogers told me that batteries are not covered by the warranty.
It would still be nice to find the answer to the flashing problem.
Gab1288 said:
Nevermind, the dude at rogers told me that batteries are not covered by the warranty.
It would still be nice to find the answer to the flashing problem.
Click to expand...
Click to collapse
Install CWM, format /system ... should take care of it .... (edit!! do this step BEFORE you flash your rom again and AFTER you complete a backup.)
Did you flash the original rogers from samfirmware w/ Odin ?
yohan4ws said:
Install CWM, format /system ... should take care of it .... (edit!! do this step BEFORE you flash your rom again and AFTER you complete a backup.)
Did you flash the original rogers from samfirmware w/ Odin ?
Click to expand...
Click to collapse
I didint found how to format /system in cwm
Yes i did flasht with odin, the .tar file from samfirmwares
I think it's under mount storage.. theres mount /system and format /system ..
yohan4ws said:
I think it's under mount storage.. theres mount /system and format /system ..
Click to expand...
Click to collapse
Good, i didnt check that one, ill take a look, anyway, its not urgent, the battery is not covered by the warranty.
Can you help - think we have same kinda phones !
Hello,
I have Samsung Captivate Glide but USA Att version and recently ran into a problem - the phone froze and when I tried to reboot all I can see is Samsung Logo and then it just won't do anything else
I'm not very Skilled at fixing Android and it seems like a headache to me, but Im trying to see if I can fix my phone:
what I've tried so far is play with the buttons while trying to reboot a phone and it gives me that menu where I can clear cache and then factory reset, I've tried both and it still does the same thing. The last thing I am trying to do now is to use "Apply update from SD Card" option in the menu recovery mode menu - kinda last chance in my limited knowledge: I have downloaded original packages from Samfirmware website, but somehow it doesn't recognize them when I'm trying to navigate folders in that menu - Im not even sure what to call the files (what extensions ?) or that it is something that it will let me do from external sd card that Im using because when I open the external sd folder it shows nothing but the SD card is plugged in - I'm just trying to see if it would completely reinstall the whole Android 2.3 system this way.
I'm only contacting you because I can see your phone in the forum is kinda like mine but a canadian version and you seem to know much more about androids - I wish I knew more and could somehow reinstall the whole Android 2.3 from scratch - I do not use a Windows laptop but can possibly find it ( I use Linux Ubuntu) if their some kinda PC Suite Software that does this (no cds came with phone though). Also, I have never messed with custom ROMs or anything like that - last time I used it I watched video online and it froze. Do I have any options here ?? The phone is not under any warranty and I do not care about my files on it much - I just want it to work same as before because to me it seems like it's not a hardware issue but I'm not really sure. Although my phone is ATT, it is unlocked to Walmart Straight Talk Unlimited Simcard - which is very affordable to me as well, and I like this phone! I never upgraded to ICS from 2.3 because it ran smoothly all the time - had it for about 6 months - wondering what could be wrong with it, I already spent 3-4 hours on it with no positive outcome.
Can you help ? THANKS IN ADVANCE - ANY TIPS ARE APPRECIATED
Thank You
Vlad
Sounds like a bootloop, it seems you still have access to recovery mode so you might be able to reinstall your stock firmware from here
Sent from my SGH-I927 using xda app-developers app

[Q] Cyanogen 10.1 mod gone wrong.

AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
chazbot7 said:
AT&T Galaxy S3
Mac OSX 10.8
I know I can get my device back, I'm just not sure how. I successfully rooted using CASUAL, no problems there. Got the normal root applications installed, did the Clockwork backup, everything was great.
I then decided to try a custom ROM - the Cyanogen 10.1. It downloaded fine, and I selected to also install Google Apps, then it rebooted and the Cyanogen boot screen with the spinning circle came up. However, this lasted way longer than I thought it should, so I looked it up, and what I got from the research is that I had the wrong gapps on there.
So, I followed the instructions in this thread (same problem as me), and wiped the system. However, I believe I used the wrong list item, and now everything I had is gone. I can't boot from recovery because it doesn't exist, and when booting into CM I just get the same error message that setup has stopped working. I thought maybe I could put a new ROM on the sd card or phone harddrive and boot from that, but both are inaccessible through USB on my Mac.
I can get it into ODIN mode (where it says "Downloading... Do not turn off target!"), which I'm thinking is what I want, and I have Heimdall installed and it runs and recognizes my device, but I cannot for the life of me find a tar.gz file to use.
If anyone can offer any sort of help, I would super appreciate it.
Click to expand...
Click to collapse
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
BWolf56 said:
Your recovery shouldn't be affected by a wipe (unless you flashed something over it) as ROMs don't flash recovery, therefor vol up + home + power should get you in it. If you success to, You should be able to mount through recovery.
As for Heimdall, it just got S3 support (last week I believe), therefor it might not be easy to find a stock file for it. That being said, if you have access to any Windows pc, that'd be the easiest solution here (using Odin).
Click to expand...
Click to collapse
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
chazbot7 said:
Yes, I can still get into the recovery menu, but when I use "backup and restore>restore" it says No files found. Is there anything I can do to just get a working OS running? Or am I just doing it totally wrong, I'm new to the rooting stuff. The Windows computer will be my last resort haha.
Click to expand...
Click to collapse
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
BWolf56 said:
Windows pc is definitely the easiest option here but you try mounting your SD from recovery, redownload the ROM and Gapps you wanna use, put them on your device and flash them after a factory reset.
If you wiped your SD card, it's normal that you don't have a backup anymore.
Click to expand...
Click to collapse
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
chazbot7 said:
It's aaaliiiiiiive! Grabbed an extra micro SD I had, threw Cyanogen 10.1.0 RC4 on it, and installed it just fine. Now updating to RC5. My only question now is how to get Google Apps on there. Does this need to be done beforehand, or can it be done after?
Click to expand...
Click to collapse
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
You usually flash the Gapps right after flashing the ROM, before rebooting.
P.S.: fully reading the instructions helps before flashing
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
chazbot7 said:
Gotcha, sorry about that. Thanks for all the help good sir. This is actually way faster than my stock ROM, I'm pretty stoked on it, Google Apps or not.
Click to expand...
Click to collapse
No need to apologize. Glad you got it back up! And it was mostly to keep you from making similar mistakes in the future
Sent from my SGH-I747 using xda app-developers app
also one thing you need to know
First boot after you flash will always take longer than normal. After that, it's fine

[Q] No ROMs taking, keep getting no MD5 message, phone close to bricked.

I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?

[Q] Bricked my phone... Need Help.

Like I'm sure this topic hasn't come up before, but I've searched for hours and I'm probably just making things worse. I also just accidentally deleted this post halfway through. It's too late and I'm too tired and I have no working phone.
Bought an SGH-I747 on E-Bay. Got a Straight Talk SIM card kit, activated it, so far so good.
Rooted it with CF-Auto-Root. Worked pretty well, took a lot of reboots, upgraded the SU from the Play Store and it got rid of Knox. So far so good. Got everything all set up the way I like it. Happy.
It was running 4.4.2. I'm assuming it was the release prior to the November 12th OTA release, but I can't say for sure.
Phone downloaded and installed an upgrade automatically. Now, it won't boot. I get the SAMSUNG logo, then the Samsung Galaxy S III logo then nothing.
I retried the CF-Auto-Root, no change.
I booted into recovery (volume up, home and power on), did factory reset, no change.
Started looking around for a way to return it to stock. Found an upgrade43.zip file somewhere (I'm sorry I can't find where I got that now). Put it on the sdcard card and tried installing it with the recovery and it fails part way through.
At this point, I think I probably need to completely overwrite everything with something stock. I just don't know how to do that. I see posts on such subjects but they all have warnings that make me think I'm going to totally brick the phone, so I'm hoping someone can point me the right way. I'm not all that Android savvy, as you can tell.
Help.
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
Thank you for your reply. There are a few things in there I don't quite understand, but I think I can figure it out.
I was going to attempt this...
http://forum.xda-developers.com/showthread.php?t=2658486
In fact, I did attempt it with TWRP last night after I posted here and new I still wasn't going to sleep. I kept getting an error about a bad ZIP file.
Is that stock restore a bad idea?
Do not attempt to flash an older bootloader. The mjb bootloader is from 4.3 and attempting to flash it could hard brick your phone.
I suggest doing what I suggested so you can confirm the bootloader and modem installed on your phone.
OK. Thanks. Probably a good thing I couldn't get it to work then.
Thank you so much. I have a working phone again. Now I just have to get it all set back up the way I like it.
I have to say, and it's probably words straight from the devils mouth, that I kind of wish I could have restored the Samsung stock software. It's just what I'm used to. But I will take what I can get.
A few questions. I like having root. But root is what got me in trouble in the first place. Is this going to be rooted now, or will I have to do that or am I better off just leaving it alone.
Second, I'm probably going to have questions since this is so different than what I'm used to (like I already can't find the Play store). Where is the best place to ask?
If you want root, one of the easiest ways to get it is to flash supersu from your custom recovery. Most ROMs are pre-rooted.
Many custom ROMs do not include Gapps. Just download and install the Gapps version for your ROM.
If you like the TW look, flash a TW-based ROM. Check out the development threads for different ROMs.
here is a thread for Q's that has some pretty good/friendly helpers on it if you need.
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"
How to save in to external SD card
How do you save the file into the external SD card? I am having the same brick issue with my GS3.
To save a file to an external SD card, just put the card into a card reader and save the ROM to the SD card.

Categories

Resources