I seemed to have lost my double tap Home to recent apps.. I just went from NuSenseSix ROM 6.1 to 6.8 clean flash, factory reset, wiped data dvlk and cache/ formatted data. Updated the radios and am on the required TWRP..
I tried to set it in Gravitybox Navigation keys actions but still no luck.. I also didn't install the Motion Gestures with Free Your Mind (subsense).. I tried with it earlier but it didn't work so I reflashed everything again.. Several times trying to pinpoint the conflict..
Thanks for any help!
payitforwarddiy said:
I seemed to have lost my double tap Home to recent apps.. I just went from NuSenseSix ROM 6.1 to 6.8 clean flash, factory reset, wiped data dvlk and cache/ formatted data. Updated the radios and am on the required TWRP..
I tried to set it in Gravitybox Navigation keys actions but still no luck.. I also didn't install the Motion Gestures with Free Your Mind (subsense).. I tried with it earlier but it didn't work so I reflashed everything again.. Several times trying to pinpoint the conflict..
Thanks for any help!
Click to expand...
Click to collapse
The Motion Gestures only need the in included kernel, Xposed, and Sense 6 Toolbox now.
There is no need for subsense.
As for the recents option, it's because you did not choose stock button configuration in aroma.
So you lost that buttons option in settings.
If you did chose stock button layout, then it will be in button settings to reassign it.
santod040 said:
The Motion Gestures only need the in included kernel, Xposed, and Sense 6 Toolbox now.
There is no need for subsense.
As for the recents option, it's because you did not choose stock button configuration in aroma.
So you lost that buttons option in settings.
If you did chose stock button layout, then it will be in button settings to reassign it.
Click to expand...
Click to collapse
gonna flash that rom.
santod040 said:
The Motion Gestures only need the in included kernel, Xposed, and Sense 6 Toolbox now.
There is no need for subsense.
As for the recents option, it's because you did not choose stock button configuration in aroma.
So you lost that buttons option in settings.
If you did chose stock button layout, then it will be in button settings to reassign it.
Click to expand...
Click to collapse
Thanks I noticed in your changelog and posts that I wouldn't need subsense.. Could you remove it from the OP about Motion Gestures?
In aroma, I have been choosing the stock button layout and tried it again with no luck.. but you gave me an idea so this time I chose logo2menu and I have it back!
Thanks for quick response, I've been using your ROM since first released it and love it!
*Update** so I was adjusting my Gravitybox sense6 toolbox and trickster and ended up losing my double tap to home again.. But I did a few things right after that seemed to have fixed it but I'm not sure exactly which did it:
1. In sense6 toolbox> sense mods > unchecked Reduce gap
2. In Gravitybox > Navigation keys actions > Under Home Key > Double-tap action > chose Show recent apps
*note: this didn't work for me when I had chosen stock button layout in aroma installer
3. In trickster under Specific > Screen Wake Control > turned off Sweep2wake, turned off Logo2wake (this might've been already off, not sure), and turned off Logo2Menu. I left Pocket detection and Logo2Menu on
Everything seems to be working fine now
I feel like what I did in #2 did the trick seeing as when I initially installed with stock buttons all the adjustments I tried to make didn't work.. But this time since choosing Logo2Menu in aroma I was able to fix it..
Related
Hi,
need help. i am encountering double applications on my apps on cool3d sense 3.0. i observed that every time i install apps from market, when i check on my apps, it has double apps. this will be fixed after restarting the device.
jhannbernas said:
Hi,
need help. i am encountering double applications on my apps on cool3d sense 3.0. i observed that every time i install apps from market, when i check on my apps, it has double apps. this will be fixed after restarting the device.
Click to expand...
Click to collapse
go to settings, applications, sense and clear data.
It is a small bug in the ROM, if you don't want to see the icons do as above, but they will come again, but its only a minor bug
thanks for your help. another thing, i have successfully copied services.jar and have the crt animation. but sometimes when i turn my screen on by pressing the power button, the brightness of my screen is very low. i need to change it in display setting to revert my current brightness setting.
is this also a bug on this rom? besides from this bugs, cool3d senstation is the best for me. thanks to coolexe.
jhannbernas said:
thanks for your help. another thing, i have successfully copied services.jar and have the crt animation. but sometimes when i turn my screen on by pressing the power button, the brightness of my screen is very low. i need to change it in display setting to revert my current brightness setting.
is this also a bug on this rom? besides from this bugs, cool3d senstation is the best for me. thanks to coolexe.
Click to expand...
Click to collapse
I used to use that ROM a week or so ago, and I remember having that issue. I reflashed it and it worked fine so I guess you could try that. Just make sure to backup before hand!!
I am using this rom, i had this issue,
i reflashed and i just flashed the RCtweaks mod with it ( there CRT animation and many tweaks on this mod)
everythings is ok now
Hello everyone,
I have just flashed new CM10 Alpha 6 ROM on my HTC One X, and since then, my home key is not working any more.
The button itself works (ie lights up, you can press it and feel vibration feedback) but there is no action.
- I haven't installed soft key enabler or disabler or anything similar
- I have tried switching "Enable custom actions" on and off with various settings, but nothing changes with the home key. The changes are applied to long press right key (I have tried to set it to search - it works, set it to none - works too), but whatever I set for Home key, there are no changes in behavior
Anybody has similar issues? Can somebody help?
Thanks
did u try any other ROM after this to check if home button is working or not?
To get better help try to post this in the CM10 thread itself
vivek_bhoj said:
did u try any other ROM after this to check if home button is working or not?
To get better help try to post this in the CM10 thread itself
Click to expand...
Click to collapse
I ended up reinstalling the ROM, it worked right after that.
I then realized it was maybe Titanium restore that screwed it up, so I did a selective restore of system app data instead of restore all that I did initially.
It works now!
Thank you for your suggestions
Didn't have a high enough post count to post directly in the current M8 SlimKat thread - hope no one minds me posting here.
Got a new M8 this afternoon and didn't hesitate to unlock the bootloader, flash TWRP, and root. I flashed the most recent build (7.0) of SlimKat, but was confronted with some problems. It seems that the home and recents navigation buttons aren't working. When I change them to a different action, it works fine - it's only when I change them back to home and recents that they refuse to work. The settings tile in the quick settings drawer also does not response to being pressed. When I'm in the system settings, I can't seem to get some changes to get through either. For example, I'll make some changes to the global menu (the menu that comes up when holding down the power button, showing options for power off/rebooting/volume settings) and exit settings, but then the changes won't show up when I open up the global menu itself.
I've reflashed the ROM twice, cleared the cache and Dalvik cache three times, and restarted countless times. Any ideas of what might be going on?
For the mean time, I'll just downgrade to the previous SlimKat build.
So I am not sure what is causing this but after rooting my phone, I installed Xposed, G3 Tweaks, did some tweaking, rebooted fine a couple times, then I decided to see about changing the system font. Downloaded Fonter, an xposed module and chose Roboto (after downloading).
Then when I rebooted, my home screen just keeps refreshing, alternating between black and the wallpaper. I can't open anything on the home screen, not even the appdrawer.
I can open the notifications panel, and go into settings and Apps...which is where I uninstalled Xposed and Fonter, etc but on reboot - same thing.
Any ideas? Oh and I can boot in safe mode and everything's fine there.
Thanks in advance.
download exact same ROM from LG or elsewhere and install with LG flash tool 2014 etc, nothing will be lost in terms of apps(everything back to normal) as long as its the same ROM version and you select "normal flash" gl.
homer285 said:
download exact same ROM from LG or elsewhere and install with LG flash tool 2014 etc, nothing will be lost in terms of apps(everything back to normal) as long as its the same ROM version and you select "normal flash" gl.
Click to expand...
Click to collapse
Thanks - this worked, although it failed to get into download mode on the first two tries.
But I still don't get it....why didn't Factory reset clear everything? When I rooted the phone, did it stay rooted even after the factory reset?
Thanks again.
Factory reset , afaik, doesn't clean up the system partition thus root and any system tweaks remain intact.
solved without reflash
I had the exact same problem on my d855......my method was more straight forward than reflashing the Rom...Google now seemed to open with no problems....did a phone search for fonter from the Google now search.....fonter shows up as an app.....open fonter and quickly hit the 3 bar menu on the left to corner and settings in the fonter app....you have to be really quick in order to open the fonter settings page before it refreshes....try using multiple fingers at once ...once in the settings page in the fonter app...choose the "restore default" option and reboot......everything should be them back to normal.....
It might take a few tries....but this is definitely easier than reflashing the Rom
zennonace said:
I had the exact same problem on my d855......my method was more straight forward than reflashing the Rom...Google now seemed to open with no problems....did a phone search for fonter from the Google now search.....fonter shows up as an app.....open fonter and quickly hit the 3 bar menu on the left to corner and settings in the fonter app....you have to be really quick in order to open the fonter settings page before it refreshes....try using multiple fingers at once ...once in the settings page in the fonter app...choose the "restore default" option and reboot......everything should be them back to normal.....
It might take a few tries....but this is definitely easier than reflashing the Rom
Click to expand...
Click to collapse
Yeah I realised I could have done that but I wasn't 100% sure it was fonter since I did other tweaks and was pending a reboot.
Also I could have switched the shell to Easy Home instead of the default and that would have given me an app drawer. I would have left it like that if the flashing didn't work. Finished everything about 4 am.
An interesting sidenote....the battery life on the phone is *considerably* better, even after installing all my apps
Since update to Lollipop we need to perform two actions (if you use any security lock) to get to your homescreen:
1. swype up
2. enter pattern or pin
In KitKat there was an option to bypass the first screen and wake up the phone direct to the pattern/pin screen.
With Lollipop this option is gone.
Does anyone found an option, a patch or exposed module to bypass the first (notification) screen or can give me a hint how to do so?
I am s-off, rooted and have exposed working with sense toolbox.
Thanks for any hint / advice.
Regards,
Umqi
Gravitybox (xposed module) can do this. It's under lockscreen tweaks, then Direct unlock.
computercarl said:
Gravitybox (xposed module) can do this. It's under lockscreen tweaks, then Direct unlock.
Click to expand...
Click to collapse
Thanks,
but Gravitybox ist only for AOSP and GPE ROMs, I forgot to say that I am on ARHD 45 which is a close to stock Sense ROM so I'm afraid to try
Reboot in TWRP, make a backup, try it, if it bootloops or breaks bad, restore the backup. I just moved to the GPE MM rom and installed Gravitybox and made all the tweaks that bl*ssr*m gave me. You might be surprised!
computercarl said:
Reboot in TWRP, make a backup, try it, if it bootloops or breaks bad, restore the backup. I just moved to the GPE MM rom and installed Gravitybox and made all the tweaks that bl*ssr*m gave me. You might be surprised!
Click to expand...
Click to collapse
Did my NAND, installed, aktivated module, rebooted and tried.
The tweaks I would need in GravityTB are not working. I can change the color of the Blutooth Icon, so I can say installation is ok.
Problem not solved jet....