Develop Bugs

[RECOVERY] Unofficial ClockWorkMod 6.0.1.4 [Rom Manager compatible]

ClockworkMod Recovery 6.0.1.4
Here is a CWM-Based 6.0.1.4 Recovery built from source
Disclaimer
I am not responsible if you break,brick,hump,throw against wall or any other action you do to your phone By using this recovery. you agree anything that happens is your own noobtastic fault. Any attempts at blaming me for anything other than this being fantastic will result in you being pointed and laughed at.
what is "recovery" ?
Recovery mode is a minimal, alternative mode of booting which allows you to install software from zip files, backup/restore your device, and perform low-level operations like factory reset and formatting partitions. All Android devices have a recovery mode (it's part of the stock AOSP environment), but the default recovery mode is very limited. For example, it only allows you to flash zips which have been signed by the vendor's private key.
ClockworkMod Recovery was developed by Koushik Dutta (@koush), and is much more flexible... If you want to flash CyanogenMod, you MUST have a non-stock recovery. Right now that means ClockworkMod Recovery.
Download link : http://www.mediafire.com/?on3x3oydjiy2i6j
How to install:
just flash the recovery zip
Changelog:
https://github.com/CyanogenMod/android_bootable_recovery/commits/jellybean
NOTE: koush's version of clockworkmod 6.0.1.4 that is in rom manager for the p350 is broken, installing koush version will brick your device. Please use this clockworkmod recovery
Features:
Latest fixes from upstream CM
fonts , graphic is like cwm 5
Power off charging
UI changes
Four times smaller backups
New CWM changes
Fully compatible with Rom Manager
ScreenShots:
soon....
Credits:
koush - for making cwm recovery
If you like this recovery then help me to feel up my thanks meter by pressing thanks button

maybe i need this later

last mine
now you can post your review

everything is ok, but mass storage mount is not working, screen is jumping up-down and font is too big...

key_master said:
everything is ok, but mass storage mount is not working, screen is jumping up-down and font is too big...
Click to expand...
Click to collapse
in next i will try to fix
this all bugs because i have build cwm from this site
http://builder.clockworkmod.com/
v6 source is not released
but i will try of fix

Touch Recovery? Or not?
Sent from my LG-P350 using Tapatalk 2

dbarrera said:
Touch Recovery? Or not?
Sent from my LG-P350 using Tapatalk 2
Click to expand...
Click to collapse
no touch recovery

i have AmonRa Recovery.
can i use this one to change my recovery??
Or is this Compatible to My Recovery??

why change ?
hello,
why would i use this ?
whats different from Amonra ?
and whats the EXT4 for ?
can i reformat the partition without deleting everything ? what is stored on that partition ?
thx for the Work on P350.

n1ck018 said:
i have AmonRa Recovery.
can i use this one to change my recovery??
Or is this Compatible to My Recovery??
Click to expand...
Click to collapse
yes you can use and yes compatible

benjamin3005 said:
hello,
why would i use this ?
whats different from Amonra ?
and whats the EXT4 for ?
can i reformat the partition without deleting everything ? what is stored on that partition ?
thx for the Work on P350.
Click to expand...
Click to collapse
amon ra 2.2.1 is old and this is new and compiled from ics branch, and why you need to reformat your sdcard partition, after flash recovery it will not delete your any sdcard partition and from wiki ext4 is
The ext4 or fourth extended filesystem is a journaling file system for Linux/Android, developed as the successor to ext3.

Restore not work

Skyff48 said:
Restore not work
Click to expand...
Click to collapse
v5.0.2.8 backup?

ron gokhle said:
yes you can use and yes compatible
Click to expand...
Click to collapse
OK ill try this 1:good:

ron gokhle said:
v5.0.2.8 backup?
Click to expand...
Click to collapse
No, in v5.0.2.8 backup work, but in v5.0.2.8 and v6.0.0.0 not work restore

Skyff48 said:
No, in v5.0.2.8 backup work, but in v5.0.2.8 and v6.0.0.0 not work restore
Click to expand...
Click to collapse
ok i mean you can't restore your 5.0.2.8 backup in v6.x.x.x . This are diff version i already posted note about this in 1st post

n1ck018 said:
OK ill try this 1:good:
Click to expand...
Click to collapse
if you think i will use this then make sure your backup made by amon ra will not restore in cwm

TOO hard to use ..
can u edit the size of the font its to big
and Why it read so slow??

n1ck018 said:
TOO hard to use ..
can u edit the size of the font its to big
and Why it read so slow??
Click to expand...
Click to collapse
i'm working to fix this in next version

ron gokhle said:
i'm working to fix this in next version
Click to expand...
Click to collapse
nc thx! :good:

[Recovery] Philz Touch Recovery [T-Mobile]

Original Thread by Philz3759:
http://forum.xda-developers.com/note-4/snapdragon-dev/trltexx-philz-touch-t2927930
Recovery Package [Goo]
http://goo.im/devs/playground/trltesku/
This is the CWM-based Philz Touch Recovery with a shiny new kernel, SELinux tweaks, and some other modifications that enable it to run on the N910T and N910W8 out of the box.
May also run on the Sprint and AT&T variants, but make sure to have a copy of a working recovery handy in case you need to restore.
Kernel: http://forum.xda-developers.com/note-4/unified-development/kernel-dealers-choice-t2915824
Device: https://github.com/StarKissed/android_device_samsung_trltetmo

[Recovery]Philz Touch Recovery - Ported to North America
The initial version uses a kernel for the N910W8 and SELinux policy settings from the N910T. If that combination works for me, I can almost guarantee it will work on either of those devices because those values would not match up.

re: Philz Custom Recovery
twistedumbrella said:
Original Thread by Philz3759: http://forum.xda-developers.com/note-4/snapdragon-dev/trltexx-philz-touch-t2927930
Download from Mega
https://mega.co.nz/#F!l1RBBbDI!KHcF184rkhshJhdF_tO7gw
Download from Goo
http://goo.im/devs/playground/trltetmo/recovery
This is the CWM-based Philz Touch Recovery with a shiny new kernel and some other minor tweak that enable it to run on the N910T and N910W8 out of the box.
May also run on the Sprint and AT&T variants, but make sure to have a copy of a working recovery handy in case you need to restore.
Click to expand...
Click to collapse
Thanks for sharing Philz Touch Recovery for our N910T, it's always good to
have a backup custom recovery just in case twrp ever stops working properly.

Misterjunky said:
Thanks for sharing Philz Touch Recovery for our N910T, it's always good to
have a backup custom recovery just in case twrp ever stops working properly.
Click to expand...
Click to collapse
Yeah, I used to just make my own but it's far easier to outsource the core and then replace it with the kernel I'm already working on.

Kernel control apps
twistedumbrella said:
Yeah, I used to just make my own but it's far easier to outsource the core and then replace it with the kernel I'm already working on.
Click to expand...
Click to collapse
Just out of curiosity, in your opinion what is the best app at the play store which
is fully compatible and easy to use with your StarKissed kernels that even noobs
can use without fear of messing anything up when changing the kernel settings?
Thanks!

Thanks.....will wait for corrected upload

louforgiveno said:
Thanks.....will wait for corrected upload
Click to expand...
Click to collapse
It should be uploaded in the next minute or two to Mega and shortly after for Goo

These links not working?

Hanoverfiste said:
These links not working?
Click to expand...
Click to collapse
They should be. I just tried them and they did

twistedumbrella said:
They should be. I just tried them and they did
Click to expand...
Click to collapse
I read back and saw where Tapatalk won't work properly, so I tried through Chrome and that's not working either.

Hanoverfiste said:
I read back and saw where Tapatalk won't work properly, so I tried through Chrome and that's not working either.
Click to expand...
Click to collapse
Mega was the issue on the device, so there is a Goo mirror below it. That should be working.

Or it would have been if I remembered I changed folders on Goo. Now it does.

twistedumbrella said:
Original Thread by Philz3759:
http://forum.xda-developers.com/note-4/snapdragon-dev/trltexx-philz-touch-t2927930
Download from Mega:
https://mega.co.nz/#F!l1RBBbDI!KHcF184rkhshJhdF_tO7gw
Download from Goo:
http://goo.im/devs/playground/trltesku/recovery
This is the CWM-based Philz Touch Recovery with a shiny new kernel, SELinux tweaks, and some other modifications that enable it to run on the N910T and N910W8 out of the box.
May also run on the Sprint and AT&T variants, but make sure to have a copy of a working recovery handy in case you need to restore.
Kernel: http://forum.xda-developers.com/note-4-tmobile/orig-development/kernel-dealers-choice-t2915824
Device: https://github.com/StarKissed/android_device_samsung_trltephil
Click to expand...
Click to collapse
Guys, I don`t know if I am doing something wrong.
I have been using Twrp 2.8.1.1, I used it to flash CWM.
I tried to back up using CWM but says error while making a backup image of /data!
please press any key to continue.
I need help please!

sunnyo_ola said:
Guys, I don`t know if I am doing something wrong.
I have been using Twrp 2.8.1.1, I used it to flash CWM.
I tried to back up using CWM but says error while making a backup image of /data!
please press any key to continue.
I need help please!
Click to expand...
Click to collapse
The partition scheme may be off. I assumed there were identical from Europe to NA but I'll verify that tonight

twistedumbrella said:
The partition scheme may be off. I assumed there were identical from Europe to NA but I'll verify that tonight
Click to expand...
Click to collapse
Thank you, I am using US T-Mobile note 4!

Yeah... The partition scheme is off. I'm on T-Mobile and it won't work. Thanks for your efforts and I can't wait to try again.

[Recovery]Philz Touch Recovery[North American Variants]
Edit: nevermind. The issue is obviously deeper than the fstab or SELinux

Thanks for your hard work. I'm happy to test if you need anything.

After a lot of building, rebuilding, reconfiguring, etc some new builds are finally up.
The current version only supports identifying itself as a T-Mobile device until fully tested.
Rather than modifying the existing European version for the US, this now fully source-built.

twistedumbrella said:
After a lot of building, rebuilding, reconfiguring, etc some new builds are finally up.
The current version only supports identifying itself as a T-Mobile device until fully tested.
Rather than modifying the existing European version for the US, this now fully source-built.
Click to expand...
Click to collapse
Thank you I am going to try it right now,
I will you a feedback.
thank you again for the great work always!

Kali Nethunter for d2spr

Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, catches fire, you get fired because the alarm failed, and global thermonuclear war
Kali Nethunter ported to the Samsung Galaxy S3​REQUIREMENTS:
A Samsung Galaxy S3 USA CURRENTLY RUNNING CM11 failure to have this will result in a brick and possibly even a HARD BRICK
A functioning brain
A working recovery
Basic instruction following skills
STEPS:
Download the two zips and copy them to your phone
Link for file 1: https://drive.google.com/open?id=0B5BIHhwzM7wWdDhnbW9xR0E3d2M
Line for file 2: https://drive.google.com/file/d/0B5BIHhwzM7wWSDA5MmZmMjN1TFE/view?usp=sharing
Reboot into recovery
Flash the zips in either order.
???
Profit.
Use make kali_defconfig to make the Kali Kernel correctly if compiling
Please post flash time and results below, this should work on ALL d2 devices under the d2lte label CM uses.
XDA:DevDB Information
Kali Nethunter for d2lte , ROM for the Sprint Samsung Galaxy S III
Contributors
dank101
Source Code: https://bitbucket.org/dank101/android_kernel_samsung_d2_kali
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CM11
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-06-09
Created 2015-06-10
Last Updated 2015-07-08

WooHoo!

hotwired34 said:
WooHoo!
Click to expand...
Click to collapse
FYI: I just updated the kernel zip to fix approximately everything.

I am trying to make a port for cm12.1 d2att could you upload the device scripts.

aron2hip said:
I am trying to make a port for cm12.1 d2att could you upload the device scripts.
Click to expand...
Click to collapse
Uhhh....
Not that easy...
Also ask on the d2att thread.

dank101 said:
Uhhh....
Not that easy...
Also ask on the d2att thread.
Click to expand...
Click to collapse
I have the kernel source in the devices directory, I'm just too lazy to edit the androidmenu bash script for the device. Unless there are further modifications necessary.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

aron2hip said:
I have the kernel source in the devices directory, I'm just too lazy to edit the androidmenu bash script for the device. Unless there are further modifications necessary.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
There are indeed future mods needed.

The first two Google Drive links are dead.
Here is a mirror for the files. I don't know how long they will last so urge OP for new mirror.
http://www.filedropper.com/kalilinuxnethunter121d2ltekitkat
946mb
http://www.filedropper.com/kalinhkernel
12.5mb

Knuxyl said:
The first two Google Drive links are dead.
Here is a mirror for the files. I don't know how long they will last so urge OP for new mirror.
http://www.filedropper.com/kalilinuxnethunter121d2ltekitkat
946mb
http://www.filedropper.com/kalinhkernel
12.5mb
Click to expand...
Click to collapse
You really should have PMed me about this FIRST.
I didn't know they died.

When will file links be available for download again cause? I was only ever able to download the kali kernel!

Flashed cm11 plus all zips , rom boots fine. Except for the part where the screen doesn't display anything (stays blank and off), however I can swipe to unlock and get the vibration as well as turn the volume up and down and get the sound that is associated. Any ideas I've done it twice with full wipes of everything I could wipe asside from the sd card

balves08 said:
Flashed cm11 plus all zips , rom boots fine. Except for the part where the screen doesn't display anything (stays blank and off), however I can swipe to unlock and get the vibration as well as turn the volume up and down and get the sound that is associated. Any ideas I've done it twice with full wipes of everything I could wipe asside from the sd card
Click to expand...
Click to collapse
You're doing it wrong.
You don't wipe anything.

dank101 said:
You're doing it wrong.
You don't wipe anything.
Click to expand...
Click to collapse
Im not wiping between installing cm11 and the two zips, that's stupidity. I was doing a full wipe before reflashing cm11 and the 2 zips again. Just no display

balves08 said:
Im not wiping between installing cm11 and the two zips, that's stupidity. I was doing a full wipe before reflashing cm11 and the 2 zips again. Just no display
Click to expand...
Click to collapse
I don't understand how that could be happening....
It's working on my S3 fine. And the nethunter zips are just a kernel and a zip that runs a bunch of scripts and extracts a CHROOT.

dank101 said:
I don't understand how that could be happening....
It's working on my S3 fine. And the nethunter zips are just a kernel and a zip that runs a bunch of scripts and extracts a CHROOT.
Click to expand...
Click to collapse
Do you think that it would have anything to do with what version of cm11 that is being used, I r what baseband? (I'm noob ish when it comes to that) cuz cm11 works fine then I flash everything and it shows the Droid logo or w/e and then goes blank with the soft keys illuminating, as well as responding to touch (side note I had forgotten to authenticate the adb connection prior so I could easily reboot to recovery and was able to bring up and select ok to allow it w/o the screen being visible, so it must be something driver related to the display)

balves08 said:
Do you think that it would have anything to do with what version of cm11 that is being used, I r what baseband? (I'm noob ish when it comes to that) cuz cm11 works fine then I flash everything and it shows the Droid logo or w/e and then goes blank with the soft keys illuminating, as well as responding to touch (side note I had forgotten to authenticate the adb connection prior so I could easily reboot to recovery and was able to bring up and select ok to allow it w/o the screen being visible, so it must be something driver related to the display)
Click to expand...
Click to collapse
Try flashing CM11 without flashing nethunter, if the display is working, then I dunno what to say.

dank101 said:
Try flashing CM11 without flashing nethunter, if the display is working, then I dunno what to say.
Click to expand...
Click to collapse
Done that 3 times cm11 works fine, display goes to **** after flashing nethunter. What version of cm11 are you using by the way

Clean flash over 04/26 nightly took about 20 mins. No issues so far I got some more playing around to do before a final verdict. Thanks I'll have some fun with this.

balves08 said:
Done that 3 times cm11 works fine, display goes to **** after flashing nethunter. What version of cm11 are you using by the way
Click to expand...
Click to collapse
Personally I used the d2lte latest nightly.

What good is this to the S3? I wasn't aware that this phone can go into monitor mode at all.

[RECOVERY] [MULTILANGUAGE] TWRP for Huawei Mate 8 **UPDATE 5/22/16**

Here is TWRP for the Mate 8. You must have an unlocked bootloader to flash this. After you flash this then you can root by flashing SuperSU after booting into TWRP. When installing a ROM for the first time you must go into TWRP and go to Wipe, then Format Data and do a format or else your internal storage will not be recognized.
-------------EMUI 4.1-------------
TWRP 3.0.2 Black & Blue:
https://drive.google.com/file/d/0B5I_q70mNuR4bGhWZDkyVXZVbnc/view?usp=sharing
-------------EMUI 4.0-------------
TWRP 3.0.2 Black & Blue:
https://drive.google.com/file/d/0B5I_q70mNuR4aWphQ2w3QXBUcU0/view?usp=sharing
TWRP 2.8.7.0:
https://drive.google.com/file/d/0B5I_q70mNuR4U3NCSWpCdEUtMjg/view?usp=sharing
Changelogs:
4-05-16: Updated to TWRP 3.0.2 Multi Language and changed some colors. Now TWRP will tell you if your internal storage is encrypted.
4-06-16: Added dark TWRP. Bug: when installing a rom the progress bar doesn't show anything. Don't worry, it still works.
4-09-16: Progress bar partially working in the Black & Blue version
5-06-16: TWRP for EMUI 4.1. Multilanguage. You can now mount through TWRP and copy files from your computer to the phone. Default language set to English. Blue themed.
5-22-16: Added themed TWRP Black & Blue to the OP. Based off of the latest twrp.
**On first screen tap the right most button, second from the bottom (Settings) then tap on the globe icon at the top right and choose your language. Then it will stay in that language**
** When formatting data in TWRP after updating to B321 it will take about ten minutes. Let it finish**​

thx for posting this, much appreciated
one of the bugs ive found with the mate 8 version is that the screen brightness cant really be adjusted. at some point it goes pretty dark and then just stay that way. a bit annoying but u can still work properly with it btw, the twrp themes from xda work like a charm
Sent from my Huawei Mate 8 using Tapatalk

jbmc83 said:
thx for posting this, much appreciated
one of the bugs ive found with the mate 8 version is that the screen brightness cant really be adjusted. at some point it goes pretty dark and then just stay that way. a bit annoying but u can still work properly with it btw, the twrp themes from xda work like a charm
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
On my Mate 8 in TWRP I cannot mount or backup data no matter what I try. Do you have the same issue? I think we need a better build of TWRP. I'm in the process of making a stock debloated ROM but the TWRP problems are driving me crazy. EDIT: Going to Wipe, Advanced Wipe and Format Data fixed the issue. Now I can install from the internal memory and my data partition is working in TWRP.

oh i thought that had smth to do with the data partition being encrypted. i had the same issue but once ive installed the decrypted boot.img i could properly access the data partition in twrp....weird huh?
Sent from my Huawei Mate 8 using Tapatalk

jbmc83 said:
oh i thought that had smth to do with the data partition being encrypted. i had the same issue but once ive installed the decrypted boot.img i could properly access the data partition in twrp....weird huh?
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
Me too, but doing that seems to fix the problem any time TWRP doesn't see my Internal Storage. The brightness bug is an issue although not a major one. It seems that after you let the screen time out then turn it back on the brightness is a lot higher.

ha nice one, didnt notice that since i usually switch off the screen timeout option yeah, all in all its definitely in working condition! no major bugs one cant work out currently. and im sure itll get better in time
Sent from my Huawei Mate 8 using Tapatalk

Thx for TWRP but can someone explain me how to unlock the bootloader on my mate 8?

use the tool dc unlocker in order to read out the bootloader code for your specific device. ull need to pay 4€ to use that function, everything else is explained in detail on the website and in the tool itself for huawei phones.
Sent from my Huawei Mate 8 using Tapatalk

@ajsmsg78 This recovery have a lot of problem in fstab partition just because chinese team used omni 5.1 sources. In my tool there is a new recovery with omni 6.0 and multilanguage

acer73 said:
@ajsmsg78 This recovery have a lot of problem in fstab partition just because chinese team used omni 5.1 sources. In my tool there is a new recovery with omni 6.0 and multilanguage
Click to expand...
Click to collapse
OK, thanks, I'll check it out

ajsmsg78 said:
OK, thanks, I'll check it out
Click to expand...
Click to collapse
No problem. I hope that you can port also in this recovery your good stuff :good:

acer73 said:
No problem. I hope that you can port also in this recovery your good stuff :good:
Click to expand...
Click to collapse
I was gonna ask you.... Thanks.... I'll do that tonight.

Hi guys
I flashed this twrp with fastboot. But it doesn't work, it can't mount anything and the phone now stuck at the Huawei logo. What can i do to solve this issue?
N910C ~ eRobot 11.1 ~ GoogyMax 2.0

dlorean said:
Hi guys
I flashed this twrp with fastboot. But it doesn't work, it can't mount anything and the phone now stuck at the Huawei logo. What can i do to solve this issue?
N910C ~ eRobot 11.1 ~ GoogyMax 2.0
Click to expand...
Click to collapse
Format data in TWRP...

Ok, i will try it when I'm back at home. But will it work, when the twrp can't mount anything? I tried to wipe dalvik and cache, fix permission nothing worked. Mounting didn't work too. Get only red text that isn't possible. It's my first Huawei device, have it since Saturday and now this problem
N910C ~ eRobot 11.1 ~ GoogyMax 2.0

i had the same problem initially. u have to flash a decrypted boot image first, then mounting is possible and the bootloop is resolved
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

Where can i find the decrypted boot image, so many questions starting from scratch with Huawei, is other than samsung.
Edit: ok, read in another thread where to get the decrypted boot image.
N910C ~ eRobot 11.1 ~ GoogyMax 2.0

I'm working on a custom ROM for the Mate 8 with the Google Apps installed, decrypted boot and rooted. I'm just trying to fix a few bugs. If I can fix them a Simply Google release will be near.

dlorean said:
Ok, i will try it when I'm back at home. But will it work, when the twrp can't mount anything? I tried to wipe dalvik and cache, fix permission nothing worked. Mounting didn't work too. Get only red text that isn't possible. It's my first Huawei device, have it since Saturday and now this problem
N910C ~ eRobot 11.1 ~ GoogyMax 2.0
Click to expand...
Click to collapse
Back up your internal storage to your computer and try this. In TWRP go to wipe, then Advanced Wipe and Format Data. Type in Yes. Tell me if after you do that if TWRP sees the Internal Storage properly. No matter what I did TWRP would not see my internal storage until I did that.

ajsmsg78 said:
I'm working on a custom ROM for the Mate 8 with the Google Apps installed, decrypted boot and rooted. I'm just trying to fix a few bugs. If I can fix them a Simply Google release will be near.
Click to expand...
Click to collapse
nice! which rom is this gonna be based on? any stock or aosp compiled? looking forward to that thx for your contribution, much appreciated!
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

Anyone got Multirom or dual boot patcher?

Hi,
Trying to dualboot OOS and stock. Anyone got this working on oreo only?

matteosaeed said:
Hi,
Trying to dualboot OOS and stock. Anyone got this working on oreo only?
Click to expand...
Click to collapse
There is not a solution that is confirmed to work on the op5t, multirom was released for the op5 but needs to be ported over to 5t. feel free to work on the port!

Misanful said:
There is not a solution that is confirmed to work on the op5t, multirom was released for the op5 but needs to be ported over to 5t. feel free to work on the port!
Click to expand...
Click to collapse
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835

matteosaeed said:
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835
Click to expand...
Click to collapse
Hmmm. If you test it please report back here how it worked for you!

matteosaeed said:
I came across this and was asking. Seems like it has a few downloads wasn't sure if someone had used it.
https://androidfilehost.com/?fid=745849072291693835
Click to expand...
Click to collapse
I tried it last night. It works, I was able to dual boot. You must download the custom TWRP by the same guy for the 5t. The custom twrp is outdated so it won't read my ntfs formatted portable hard drive. You must also be decrypted.

cubandanger05 said:
I tried it last night. It works, I was able to dual boot. You must download the custom TWRP by the same guy for the 5t. The custom twrp is outdated so it won't read my ntfs formatted portable hard drive. You must also be decrypted.
Click to expand...
Click to collapse
Hey, thanks for trying this. Did you flash any roms?

matteosaeed said:
Hey, thanks for trying this. Did you flash any roms?
Click to expand...
Click to collapse
Yes. I flashed Omni as secondary, although I had to remove the assert lines in the updater script. Then it failed to install magisk on secondary, so to make it work I had to swap primary and with secondary, Flash what I needed to Omni as primary, then swap it again. Pain sticking but worked.
I wonder how hard would it be to update the custom twrp with the most recent changes in regular twrp.

Sounds interesting, what was your other room?
Any chance you tried to restore a nandroid backup as second rom?

pargas said:
Sounds interesting, what was your other room?
Any chance you tried to restore a nandroid backup as second rom?
Click to expand...
Click to collapse
I was using codename Phoenix as primary. I didn't try backing up or restoring using the customer twrp

Anybody that knows anybody that would be able to use the twrp and multirom source and update the recovery with most recent changes?