Hello everyone,
I have a SG Note SHV-E160L Korean mobile. I have found a article about Root the SG Note.
http://rootgalaxynote.com/galaxy-no...on-galaxy-note-gt-n7000-no-computer-required/
So I flashed CWM.tar.md5 file via Odin and flash the Root.zip file via CWM and successfully rooted it. In that video he said after the root, flash the kernel named franco-kernel. So I flashed it via CWM and reboot the device. But it did not power on. I tried to put it into the Download mode, Recovery Mode but no luck. The device is Hard-Bricked. when it connected to charge no sign of charge screen always black :crying:
I want to know is there any method to Unbrick it without usin Riff Box JTAG. Because I have not much money for that service. I took it to the repairing shop and they said the cost it 30$ for JTAG. Please help me is there anything that can do in home without spending money?
Also I found a method named BrixFix to unbrick E160L model. But I did not understand it. If anyone can tell me how to do that, I'll really appreciate it.
http://forum.xda-developers.com/showthread.php?t=2136738
Thanks!
Please..... anyone? :crying::crying::crying::crying::crying::crying:
did you manage to unbrick your device?
hey did you manage to unbrick your device or found out how to use brixfix?
hello everyone, please, a .pit file was flashed on a SHV-160L, and the device blinded out, just like how it does when the battery is low. when the battery was recharged i discovered that the phon does not ON anymore neither does it respond to the power botton, please how do I get out of this ****.
PLEASE HELP HELP HELP.
Related
Hello my galaxy i747 is hard bricked really hard i accedently Deleted all my files on storge and sd card then i got bricked cant get in to download mode or recovery & jig and jtag didnt work also sd card method so i cant to anything please help me! (Sorry for bad english)
shilian11 said:
Hello my galaxy i747 is hard bricked really hard i accedently Deleted all my files on storge and sd card then i got bricked cant get in to download mode or recovery & jig and jtag didnt work also sd card method so i cant to anything please help me! (Sorry for bad english)
Click to expand...
Click to collapse
To get real help from here, you really need to give more information on what went wrong. Specifically, what caused the brick? Were you flashing any firmware? If so, what were you flashing and how?
A J-Tag is the ultimate solution to any bricking problem caused by firmware failure as this forces firmware installation directly to the motherboard so if you say you tried this and it didn't work, I'm afraid it may not be a firmware problem you have.
i plug in my phone deleted all my files ALL aand then flashed firmware of Hiemdall firmware then i got PASS on odin then Galaxy icon popup and then black screen and nothing more.
You said you already tried a jtag service and it didn't work. More than likely its irreparable on that case. Sorry to hear about that....
well i got nothing to say only ccry maybe.
shilian11 said:
well i got nothing to say only ccry maybe.
Click to expand...
Click to collapse
I hard bricked my galaxy s3 i747 when I flashed a bad modem on 4.4.2. Has anyone been able to successfully unbrick with jtag on 4.4.2?
Not to my knowledge. If a way is found it will be posted in the actual debrick thread. If its not there its not been done yet.
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
Are G3 phone OEM warrantied for water damage?
Water-damaging the phone is a risky way to go. I was under the impression that water-damage is not covered, especially since most phones even have a moisture-indicator strip on the motherboard for detecting it. Even if it was covered, what if they do reject warranty due to any reason(including software tampering?). You'll actually end up with an expensive brick then. Atleast now you have a working(albeit buggy) phone.
I'll suggest to wait till the devs can find some way to help you. Was going to suggest you try the Qualcomm HS-USB QDLoader 9008 mode method but it looks like you've already tried that.
Hi, I have the exactly same problem. But after some digging i found this thread : http://forum.xda-developers.com/showthread.php?t=2660566 and http://forum.xda-developers.com/showthread.php?t=2345860
I think that is a long shot, but if somebody provide "debrick image" - (following istructions from the top of the thread) from their D855 devices with lollipop firmware (19h or 20A) it can be worth a try.
Sorry for my english.
bonkieash said:
The best advice I can give to you is that if no solutions become available to you, depending on the warranty, I would water damage the phone so the warranty does not reject your claim. Otherwise you may have to play the waiting game until developers create a solution.
Click to expand...
Click to collapse
LG would not warrantied the phone if its waterproof. They specifically asked you if you crack your screen or has been water damaged. If you do, you either pay a hefty price ($150) or they can refuse to fix it.
jayro28 said:
Click to expand...
Click to collapse
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
ifscher said:
OMG. I'm in the same boat. Do you know where I can get this tool? I would really appreciate!
Click to expand...
Click to collapse
Link in PM
jayro28 said:
Link in PM
Click to expand...
Click to collapse
Many thanks! I believe my phone passed the test. It still recognizes my phone as QHSUSB and it doesn't power up, enter recovery nor boot anything.
Do you have any tip to what to do?
jayro28 said:
Link in PM
Click to expand...
Click to collapse
jayro, where i can find the lg smart boot app? can you help me, sorry for my bad english, thank you
jayro28 said:
Link in PM
Click to expand...
Click to collapse
i need that program too please can you giveme a link too thanks in advance.
jayro28 said:
Link in PM
Click to expand...
Click to collapse
hi master plase share with me this tool .
i have g3 qualcomm mode now brick
rodrigofd said:
HI guys, I need help from some caritative soul please!! I'm desperate.
Some of you might have already read about my case: I rushed, last weekend, to flash one of the beta Lollipop versions that hanged around (v19h); I only flashed bootloader and rom.
Now, my phone does not boot to LAF (download mode), nor recovery (TWRP) anymore, because of those not being signature-compatible with new bootloader.
And, since I am obviously not rooted, I am stuck to this version, unable to get out: I can't flash KDZ, or flashable zip on recovery.
Today, I have tried literally EVERYTHING suggested on XDA.. with no luck....
I am basically stuck with a extremely expensive paperweight... any ideas to help me?
RIght now, my only choice is to return it to insurance/warranty, but... what could I possibly say? .. They might laugh at me when they see the Android 5.0 version screen....
Any kind of ideas will be extremely appreciated... Thanks!
Attempts I already tried without luck:
* Flash new/old KDZ or TOT with Flashtool
* Flash new/old KDZ or TOT with Flashtool 2014
* Any ADB attempt
* Any fastboot attempt
* The dreaded RED 2? ...
*[FIX] Unbrick LG G3 stuck in Qualcomm HS-USB QDLoader 9008 mode
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2582142
It might work for your situation
Greetings,
As you can already tell from the listing on this post, I have hard bricked my S III,
I accidently hard bricked my SIII, by mistaking flashing a international rom, In the description of the rom it even stated it WAS
for my model of phone. They Lied....
Anyways, I done some research and came across a few ways of debricking it, None of which seem to be working. Although I am able to
Get a red charge light on my phone when I plug it into my computer with the battery out. Also, I am unable to Boot into Recovery or Download Mode.
Can you please help me.
Android Sketch said:
Greetings,
As you can already tell from the listing on this post, I have hard bricked my S III,
I accidently hard bricked my SIII, by mistaking flashing a international rom, In the description of the rom it even stated it WAS
for my model of phone. They Lied....
Anyways, I done some research and came across a few ways of debricking it, None of which seem to be working. Although I am able to
Get a red charge light on my phone when I plug it into my computer with the battery out. Also, I am unable to Boot into Recovery or Download Mode.
Can you please help me.
Click to expand...
Click to collapse
JTAG ebay craigslist..
JTag Unbricking
vizionforever said:
JTAG ebay craigslist..
Click to expand...
Click to collapse
Yes, I am having problems finding the correct JTag jig. I have looked for ones that are for Galaxy S III's but none seem to be working with the SPH-L710. And has anyone actually used a JTag for unbricking this.
JTag Jig
Saafir said:
Jtag is likely your only hope. A usb jig is doubtful
Click to expand...
Click to collapse
I looked on the internet and found that when you look up Jtag , you are given given results for what looks like a jig for (a given phone), and that it will let your phone boot into download mode.
Is that what you are talking about being doubtful. And I do thank you for your responses.
I have also tried using a debrick Img file and installing it to my 16gig sd card, and gone down that route, but that did not work, which is why I am considering spending the money on a Jtag Jig...
please , i have a hard bricked at&t note 4 n910a. please i need a file to unbrick it. if you have this backup.img ,please send me the link and how can i flash it on sd card. on my pc , i see qualcomm HS-qloader 9008. please ,help. scuse my english. thanks.
Russelca said:
please , i have a hard bricked at&t note 4 n910a. please i need a file to unbrick it. if you have this backup.img ,please send me the link and how can i flash it on sd card. on my pc , i see qualcomm HS-qloader 9008. please ,help. scuse my english. thanks.
Click to expand...
Click to collapse
Any update on this??
this is how to make the unbrick soft. please help
if anyone can help with this we need working phone follow these steps and post the unbrick file here, take a look at this http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
you will need this also
http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
thanks
this is the link of samsung galaxy note 4 n910a for at&t . please use it with all note 4 qualcomm 805 to create the debrick.img and post here to help.
http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
thank
I heard it needs root
and since this phone has little to no development
we might not have a fix for it sadly
how did you brick yours?
AlexanderDAB said:
I heard it needs root
and since this phone has little to no development
we might not have a fix for it sadly
how did you brick yours?
Click to expand...
Click to collapse
All soft and tuto to make this debrick file are in this post.please Alexander, if you have thé note 4 with processor 805 Qualcomm ,please help, make this file and post hère. I have brick my phone because i flash a ROM 5.1.1 with Odin an forger to unstick répartition. After flashing complet ,m'y phone does not Start.on PC ,i sée "Qualcomm hs-usb qloader 9008" .please sée thé pdf file and make this file ans post hère or send to "[email protected]" . i am waiting to you. Scuse m'y english. Thanks
Russelca said:
All soft and tuto to make this debrick file are in this post.please Alexander, if you have thé note 4 with processor 805 Qualcomm ,please help, make this file and post hère. I have brick my phone because i flash a ROM 5.1.1 with Odin an forger to unstick répartition. After flashing complet ,m'y phone does not Start.on PC ,i sée "Qualcomm hs-usb qloader 9008" .please sée thé pdf file and make this file ans post hère or send to "[email protected]" . i am waiting to you. Scuse m'y english. Thanks
Click to expand...
Click to collapse
i would......... if my note 4 wasn't bricked as well
I have an unbricked att note 4 available (my girlfriends) and a bricked one. Im leary of this procedure as i cant afford to brick another note 4 (my girlfriend will literally kill me she is cajun). It shows checking repartition which a few posts i found about debrick images said a bad idea..
Help
Same situation, only I have not tinkered with my phone. Completely stock, not rooted. I pulled my battery when it froze & it's been unresponsive since. Tried everything. I think it may have been trying to restart when I pulled the battery and it borked the firmware. Previously it had been acting strangely, freezing & randomly rebooting. I am familiar with rooting & reflashing as I have done that before, just never with this particular phone since the bootloader is locked. Please, anyone, I am very desperate. Thank you!
Hi there,
i just bought a samsung s3 from a friend who has been using the phone for two years without any problems. i charged it and then wanted to root it. i did it with kingoroot from playstore and got root. then i wanted the TWRP recovery for a rom flashing. i tried to power off and then i was gonna go to the download mode for Odin flashing the recovery but the phone wouldnt turn on.
took it to the technician and he said its Dead, had to replace the board. again that of SGH I747.
Now my question is how is it posibble that a phone with drivers installed on my pc automatically shows the name of GTI9300 and actually is SGHI747. i rooted with kingoroot choosing I9300 and i tried TWRP manager also For I9300. what phone do i have really now it says i9300 behind the battery(under) and the technician says its i747 american model and how to root it safely , what recovery, what rom is best for it, (battery and gaming wise)?????? Plz need REAL help guys... thatnkyou all.
Update
ok guys replaced board and the board says its i747 , the phone says its i9300 and in download mode it says t999 . by searching via imie thru a website it says IMEI Samsung SGH-T999V Galaxy S III . what the hell guys. its rooted and CM 6 recovery done too. what rom do i flash plz help .................. plz someone.
some one plz
This happened with me also but i think u should know what broadcommchipset do you have it will tell you about your phone you can also try special apps from the playstore like cpu z they can tell you what device you have be sure that these apps don't connect to the internet to do so because they might take ur imei number and look for it on the internet this way you wont know what hardware do you have. I am not an expert but i wouldn't recommend flashing rom before you know unless you have time for flashing again and again and researching unbriking...etc. plz let me know if you where able to find a solution