Hi everyone !
I have an issue on my One X when I'm using the g sensor. For instance, if I use it to take a photosphere, the points start to slowly drift to the side.
I'm on CM11 M7 but i've had the issue for a long time even on CM10.
What's happening ?
I rebooted while pressing volume up and it seemed to work. I managed to make a small photoshpere. I tried to make another one and the g sensor was acting weird again.
No idea ?
Hx00R said:
No idea ?
Click to expand...
Click to collapse
have you tried to calibrate your g-sensor?
Yes, I've used GPS status and advanced tools that both have a calibration functionality. That didn't work.
Maybe there is another way of doing it that I'm not aware of.
Hx00R said:
Yes, I've used GPS status and advanced tools that both have a calibration functionality. That didn't work.
Maybe there is another way of doing it that I'm not aware of.
Click to expand...
Click to collapse
read this
hope this can help
This technique seems to apply to phones which don't have a working sensor at all. But I've tried it anyway. And it doesn't work.
Hx00R said:
This technique seems to apply to phones which don't have a working sensor at all. But I've tried it anyway. And it doesn't work.
Click to expand...
Click to collapse
have you tried a sense rom?
I have the same issue on my HTC One S ville running CM11. I was thinking about downgrading to CM10 but that doesn't seem to fix it as you say.
I would really like photosphere to work correctly. Does anybody else have this problem (running stock rom), any fixes?
Related
Hi!
I got a rooted DZ with several rom's tried out.
I believe that in the Stock OTA-ROM everything worked fine.
Now I'm at the Vision-Desire-HD-Sense 3.0 .
The light sensor is working a bit, but shows at darkness 10, at daylight 40 and in the sun 160. Another Handy shows 160 at daylight and 360 in the sun.
The proximity sensor always shows 9.0 ...
Is the sensor damaged or can I replace some library's or config files in the ROM?
Thx!!!
Domi
maybe is the rom. Try reinstalling it.
domi65
Did you find the solution?
I guess I have the same problem.
I have the same problem. Tried differebt ROMs, but it still don't work.
Did anyone solve the problem?
CaKTYC said:
I have the same problem. Tried differebt ROMs, but it still don't work.
Did anyone solve the problem?
Click to expand...
Click to collapse
If it's anything like my Desire Z, your phone will be permanently affected by this. My light sensor just stopped working one day, and never started working again.
LiquidRain said:
If it's anything like my Desire Z, your phone will be permanently affected by this. My light sensor just stopped working one day, and never started working again.
Click to expand...
Click to collapse
so, the only way is service center?
I have noticed that my Gyro and Compass are Not Responding to movement of the phone, and I am wondering if its a driver issue or a hardware one. Can any of you boffins give me some advice on how I may resolve this please ?
Ian_4614 said:
I have noticed that my Gyro and Compass are Not Responding to movement of the phone, and I am wondering if its a driver issue or a hardware one. Can any of you boffins give me some advice on how I may resolve this please ?
Click to expand...
Click to collapse
Download "Z-Device Test" from the play store, there you can find out if it's hardware related or not. I also would like to know what Rom/Kernel/Recovery combination you have, or is everything stock?
Well, I'll be honest and admit that I never ever seen a compass in my note 2, though I'm sure I seen it in the original note. If anyone could point me to it, I'd appreciate it. I did look in apps but not there.
retrorom said:
Download "Z-Device Test" from the play store, there you can find out if it's hardware related or not. I also would like to know what Rom/Kernel/Recovery combination you have, or is everything stock?
Click to expand...
Click to collapse
Thanks for the reply. I have downloaded it, and it would suggest that the sensor IS working ok, but the phone is not recognising it for some reason. Would the kernel be a reason ? This is driving me nuts...
Ian_4614 said:
Thanks for the reply. I have downloaded it, and it would suggest that the sensor IS working ok, but the phone is not recognising it for some reason. Would the kernel be a reason ? This is driving me nuts...
Click to expand...
Click to collapse
Hmm, are you on stock Rom? If so you can calibrate gsensor under settings - display (i think)...
Or you can try this if you are rooted
Or get this app and if I'm not mistaken it lets you calibrate the g-sensor.
Hope this helps
I know I'm not the only one with this problem, so I started a thread to find out is there anything we can do to fix sensors. In my case g sensor and compass don't work. I don't know is it physical or software issue. I found out sensors didn't work after I was jugling between roms CM 10.2 -> 10.1. Tried roms with sense, tried official roms, nothing. Anyone can help?
anybody? i'm desperate to make it work.
Maybe now? I'm still hoping this can be fixed somehow...
sopel87 said:
Maybe now? I'm still hoping this can be fixed somehow...
Click to expand...
Click to collapse
If your sensors didn't worked, out of the box. And even if in non of the roms you can get back your sensors to work, then probably your sensor hardware needs to be replaced.
Usually there were peoples who had sensors issues in CM roms, but by flashing Sense rom, they used to get back there sensors to work. But as you said, non of the Roms solved your issue, then it looks like its a hardware issue.
Thanks....
Sent from my HTC Desire Z using xda app-developers app
Hello everyone. I've just installed few CM11-based roms (MIUI and AOKP) and noticed a strange thing. When I am just locking my phone and trying to unlock it after a while, screen doen's wake up. It just stays black and there is no reaction for power button. I have to reboot my phone by removing battery so that is really annoying. Stock was working fine, i hadn't notice anything like that. Anyone know the solution?
Mardrom said:
Hello everyone. I've just installed few CM11-based roms (MIUI and AOKP) and noticed a strange thing. When I am just locking my phone and trying to unlock it after a while, screen doen's wake up. It just stays black and there is no reaction for power button. I have to reboot my phone by removing battery so that is really annoying. Stock was working fine, i hadn't notice anything like that. Anyone know the solution?
Click to expand...
Click to collapse
Violently press the button over and over. It worked for me.
Sent from my awfully named device.
RedLedLight said:
Violently press the button over and over. It worked for me.
Sent from my awfully named device.
Click to expand...
Click to collapse
I found another solution i think. I just set up minimal CPU freq. over 400mhz and it's working fine. At least under the charger. You have to press it every single time or once and it's working fine then?
E: Without charger the same issue. Not solved.
I have the same problem and I think it has something to do with the proximity sensor.
Sounds interesting. Why do you think so?
Btw. I don't know why but I am happy that I am not alone with this problem.
Because:
Proximity Wake-Up support – prevent accidental wake-up of device by checking to see if proximity sensor is blocked (eg. Device is in a bag or pocket).
Click to expand...
Click to collapse
I think, here is some XPM bug. Just my thought
lookynator said:
Because:
I think, here is some XPM bug. Just my thought
Click to expand...
Click to collapse
What do you think about checking older version of miui then? I mean v4 or something...
Mardrom said:
What do you think about checking older version of miui then? I mean v4 or something...
Click to expand...
Click to collapse
I've never tried.
lookynator said:
I have the same problem and I think it has something to do with the proximity sensor.
Click to expand...
Click to collapse
Hello, I have the same issue on SGS3 with CM11 M11 (M10 too). Have U found some solution for that ?
Dik
my device is LG-G3-D855.
after upgrading the software to android 5.0 from LG PC Suit, and after a day passed, I noticed that my auto-rotation is not working, and the proximity sensor is not responding during a call and the screen remains active.
I tested the sensors through hidden menu and saw that they are actually working and they are not stocked.
what is the solution? is it a software problem?
I also did downgrade the OS to the stock one and the problem still remains.
I'm sorry I am not able to help, but I am able to tell you I came to the forums today to post the exact same issue.
I had been using Liquid and CM12 for a while and my proximity sensors and brightness sensors (as well as screen turning off when I bring phone to my ear) were not working. I simply assumed it was an AOSP problem.
I just recently flashed the new stock lollipop rom that's on the development forum and I am having the same problem still. I do not know how to fix it and I'm hoping someone out there can help us!
edit: everytime I try to recalibrate the proximity sensor in settings, settings 'unexpectantly closes'
theraker007 said:
I'm sorry I am not able to help, but I am able to tell you I came to the forums today to post the exact same issue.
I had been using Liquid and CM12 for a while and my proximity sensors and brightness sensors (as well as screen turning off when I bring phone to my ear) were not working. I simply assumed it was an AOSP problem.
I just recently flashed the new stock lollipop rom that's on the development forum and I am having the same problem still. I do not know how to fix it and I'm hoping someone out there can help us!
edit: everytime I try to recalibrate the proximity sensor in settings, settings 'unexpectantly closes'
Click to expand...
Click to collapse
Have you had any luck on finding a solution to this? I've been in the same boat for a couple months now.
cotes10 said:
Have you had any luck on finding a solution to this? I've been in the same boat for a couple months now.
Click to expand...
Click to collapse
No, I'm afraid have found nothing to solve the problem.
ansari.srm said:
No, I'm afraid have found nothing to solve the problem.
Click to expand...
Click to collapse
Dang, same thing on my end. I've tried several different Roms/Kernels and still nothing. If I find a solution, I'll be sure to let you know!
Bump
Im having this issue as well. Anyone?
I've just resolved the same issue. No matter ROM I flashed to my LG G3 all the sensors were gone. The only thing it fixed that was flashing TOT using lg flash. More details on : htt ps: //forum.xda-developers. com/showthread .php?t= 2785089
ADD: The updated method worked for me NOT the original one.
Fingers crossed.