First of all I have not experienced this issue at all but just to make things easier on everyone that is using these builds that has this issue I figured I'd make a thread for people to discuss this issue and hopefully be able to get to the bottom of it.
Now a theory I have as to why I don't get this issue is that I keep my contacts stored on my sim. The feature must be enabled in the csc file for it to work. On my rom I put this into it as default and I passed it along to lemonboi5 to add into LikeWise. If we find that this is a good fix then I will post exactly what is needed for it to work properly.
And below are some quotes out of the stockmod kit kat thread of what they have found to be a good temporary fix for this.
troycarpenter said:
For the "+" or "+1" issue, I found this app as a stopgap until a fix is found:
https://play.google.com/store/apps/details?id=com.tftbelow.prefixer
For me, the incoming calls all have a "+" prefixed to them (not "+1", just the "+"). With Prefixer I created a simple rule that removed the "+" before dialing. Now I can dial from my call log again.
Still looking for the root problem to be fixed...the call log still shows the "+" in the number even though it's still matching numbers in my contact list.
Click to expand...
Click to collapse
mrhaley30705 said:
Here is my rule set up and it seems to work fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
troycarpenter said:
I have that as the outgoing rule, but you can create a similar rule for incoming. I have it a bit more selective:
Condition: \+.* (This only matches numbers with the plus on it...which is every number in my case)
Remove: \+
Then, at the bottom of the rule, enable the Advanced editor. There is a section that says "Add number to call log". I switched that to "Prefixed number". Now the incoming calls have the + stripped off even in the call log.
Click to expand...
Click to collapse
and if someone would like to try adding this to their csc/feature.xml and let me know if it fixes it.
Code:
<CscFeature_Dialer_PhonebookNdigitsMatching>true</CscFeature_Dialer_PhonebookNdigitsMatching>
<CscFeature_RIL_CallerIdMatchingDigit>true</CscFeature_RIL_CallerIdMatchingDigit>
First!!
Do I have to wipe dalvik or cache or anything after I add the two lines to my csc features.xml?
evisser4 said:
Do I have to wipe dalvik or cache or anything after I add the two lines to my csc features.xml?
Click to expand...
Click to collapse
Yes I would think that'd help it work. Not sure if those work yet as nobody has confirmed anything and I still haven't seen this bug. All my numbers come in normal on every kit kat rom I've been on just wanted to post this here so people could find it if they needed it. There might be a system app or framework thats causing this even. Its consistent on all the ND8 base roms though. I'm hoping its gone in NE4, haven't seen much about it there yet except from the hybird lemonboi made which I think is more ND8 from what he told me about it.
talkingmonkeys said:
Yes I would think that'd help it work. Not sure if those work yet as nobody has confirmed anything and I still haven't seen this bug. All my numbers come in normal on every kit kat rom I've been on just wanted to post this here so people could find it if they needed it. There might be a system app or framework thats causing this even. Its consistent on all the ND8 base roms though. I'm hoping its gone in NE4, haven't seen much about it there yet except from the hybird lemonboi made which I think is more ND8 from what he told me about it.
Click to expand...
Click to collapse
Ill try adding it and wiping dalvik and report back.
I think it may have to do with particular number combos. Like maybe it must be a true international two digit code in the beginning. If that is such a thing. lol For example:
A 407 number called me and it was fine..... Like this: +407XXXXXXX
But all 321 numbers are weird and when I call it back by tapping it is someone else in another country lol.
Ex. +32 1X XX XX XX
I could be way off, but I did find it odd that two different number display differently.
The feature.xml changes did not appear to make any difference for me. I747 AT&T, Likewise LT.
I wiped cache and dalvik too.
Let me know if you want me to try anything else. Thanks.
evisser4 said:
The feature.xml changes did not appear to make any difference for me. I747 AT&T, Likewise LT.
I wiped cache and dalvik too.
Let me know if you want me to try anything else. Thanks.
Click to expand...
Click to collapse
Thanks for trying those and giving me a better idea of whats going on. It should be fixed on the NE4 releases but if it isn't I will look into this more. The temporary fix in the posts I quoted should help with this until you switch to an NE4 rom.
talkingmonkeys said:
Thanks for trying those and giving me a better idea of whats going on. It should be fixed on the NE4 releases but if it isn't I will look into this more. The temporary fix in the posts I quoted should help with this until you switch to an NE4 rom.
Click to expand...
Click to collapse
Set up the app you recommended in the OP. Works like a charm. Thank you.
Related
This is a simple and easy way to backup and restore your GS3's COMPLETE NV items which hold your IMEI, IMSI, Data settings and much more!
INSTRUCTIONS:
1) Download NV reader/writer HERE and install THESE drivers.
2) Dial *#7284# and select "Qualcomm USB Settings" then check "RMNET + DM + MODEM".
*If you are running a aosp rom (cm9,cm10,aokp etc) you can use the diag method described HERE
3) Create backup.
a) Click "port" in the top left and select your samsung serial port.
b) Make sure BOTH boxes in the top bar are checked.
c) Click "Connect" in the top bar.
d) Click "Read" in the top bar.
e) Click "Read" in the lower 'NV-items' section.
f) Save the .txt file, this is your backup
*The process will take 5-10min. The file size will be roughly 3mb and "inactive item" and "bad parameter" sections are normal.
*To restore click "Write" in the lower 'NV-items' section and navigate to your backup file.
4) Dial *#7284# and select "Qualcomm USB Settings" then check "MTP + ADB".
Demonstration video HERE << Thanks to moonfire for the video.
IMEI ALREADY CORRUPT?
Use THIS custom built tool to easily generate a backup file with your properly formatted IMEI to restore your phone!
1) Enter your IMEI (find it behind your battery) in the text box up top, hit generate then hit save.
2) Use "NV-Item reader writer" to write the saved text file back to your phone and then reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks:
Me
cdma-ware
Peoplearmy
GerardAnthony
oriax123
Time and money have been invested into this project so donations are appreciated.
Donations: HERE
ATTENTION: I need a copy of someones full backup. Requirements are that you never flashed an AOSP rom (CM9, CM10, AOKP) and that your SGS3 is T-mobile. I need this to work on the data issue!
Update: The data issue is still being worked on and some progress has been made but there is still not a solid easy fix. IF YOU MADE A BACKUP THEN GOT THE DATA BUG, PLEASE MAKE A SECOND BACKUP SO THAT I CAN COMPARE THE BEFORE/AFTER!
reserved
Nice, even easier method.
Can someone with a T-mobile sgs3 that has never flashed a CyanogenMOD rom or preformed a clockworkmod restore do a full backup and send it to me in a private message?
To do the backup I need read Range (Dec): 00000-05575
Note: I want this so I can look into the data issues that some people are having. Thank you.
Is thats how it suppose to look , isn't string very short only 9 characters long ? ATT Samsung based deodexed rom.
Capture.JPG
It is working on ATT too? Do i have to have unsecure kernel?
Edit: i know the answer for first one... Yes how about second?
ghost77 said:
Is thats how it suppose to look , isn't string very short only 9 characters long ? ATT Samsung based deodexed rom.
Capture.JPG
Click to expand...
Click to collapse
Yes, that is how it's supposed to look. The 08 is the command setting and the rest is your encoded IMEI.
norbarb said:
It is working on ATT too? Do i have to have unsecure kernel?
Edit: i know the answer for first one... Yes how about second?
Click to expand...
Click to collapse
Yes it works on ATT also. No you do not need insecure kernel, it will work on a stock phone.
It will work if I'm rooted also?
Sent from my SGH-T999 using Tapatalk 2
sTyLeSz said:
It will work if I'm rooted also?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yes.
So I backup the IMEI and if I ever loose it I restore my IMEI and it will give me back data btw great work will donate soon, I'm on a stock rom not cm with faux kernel, I can't backup or do I have to go back to stock?
Sent from my SGH-T999 using Tapatalk 2
Wait, you guys found the IMEI? I haven't been following.
I backed up and I was using FreeGSM R5. Backed up and re-wrote, lost service but it came back after a reboot. Great find! Now don't have to worry about ever losing my IMEI.
Does this mean we need no longer be afraid to flash to our hearts content?
Sent from my SGH-T999
This is great, thanks! IMEI backed up and written back to check :nervewrecking:
Took a reboot to get service after writing it back, just to let people know
Donations sent, go buy a beer!
Quick Q, do you HAVE to write the backup to the phone?
laylovj said:
Quick Q, do you HAVE to write the backup to the phone?
Click to expand...
Click to collapse
No, I was just demonstrating the write feature.
Super simple, thanks! Can't believe that this IMEI issue plagued us and then all of a sudden peoplesarmy figured it out and you immediately released this super simple version. Thanks! Now to install CM10...
Whew, safe to flash again! Great work!
WOW! This just got even easier! Un-Freakin' - believable, how easy you've made this "Mr. Geek! I just wrote it three times just for practice, and because I was kinda havin' fun for a second there, lol! You guys are so amazing. Thank you so much for all of your hard work on this! Now I've got mine backed up both ways, but with this file saved to my pc, it's so fast to do. I dare somebody to wipe my imei, lmao!
Seriously Geek, you've saved alot of ppl alot of trouble & cash & that's great. You and Peoplearmy both put in alot of work to help so many ppl who couldn't have done it without you, and it's selfless acts of kindness like this that make xda such a fun community! I'll be holding onto my gs3 forever, and I'm really looking forward to learning from fellas like yourself & Peoplearmy!
i just flashed pa 3.0
and then i have this problem
whatever 3G or WIFI
i cant add my google account in the phone
when i want to add it
it shows
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and it is work fine before i flash this rom
can somebody help me to fix this problem?
thx very much
Did you flash the gapps from the pa thread? You have to have those for all that stuff to work. Make sure its the PA gapps because they've made some changes to them, somehow.
02ranger said:
Did you flash the gapps from the pa thread? You have to have those for all that stuff to work. Make sure its the PA gapps because they've made some changes to them, somehow.
Click to expand...
Click to collapse
Yes i did, i flashed the latest gapps(20130209) which provide in the thread.
henrywhtin said:
Yes i did, i flashed the latest gapps(20130209) which provide in the thread.
Click to expand...
Click to collapse
I'm not sure then, you might have to reflash everything. I don't know what else to try. I've never had that particular issue. Was it a dirty flash over another version? I'd make a backup, do a clean install, and see if the problem is still there. Worst case, if it is still there, you can restore your backup. If not, then maybe the install had a brain fart. Have you tried reflashing PA and gapps and wipe cache and dalvik on this install? (Sorry if I'm rambling, I'm half asleep)
It doesnt look like you are connected to any network at all. Your wifi and signal icons are greyed out. Thats why you are getting that message.
jsgraphicart said:
It doesnt look like you are connected to any network at all. Your wifi and signal icons are greyed out. Thats why you are getting that message.
Click to expand...
Click to collapse
That's true, I hadn't noticed that. OP, can you go online at all, like with the browser?
i have follow the instruction to do a clean install ,and for fixing this problem , i do it so many times , but it still doesn't work
also , i have internet connection,i can go any website.....
henrywhtin said:
i have follow the instruction to do a clean install ,and for fixing this problem , i do it so many times , but it still doesn't work
also , i have internet connection,i can go any website.....
Click to expand...
Click to collapse
Does it go online with a cellular connection or just wifi? Check Settings>About Phone>Status>IMEI and see what the number is. I don't know why, but that was the first thing I though when I reread this thread is that maybe you've had your EFS partition wiped. I "think" if it's a real IMEI it will start with a 3, but a generic unusable one will start with a 1. I don't know if that would affect Google Connection, but it might.
Also, have you tried redownloading the ROM and GAPPS?
Did you set correct Date & Time settings? Cuz it's important to log in GG account.
jsgraphicart said:
It doesnt look like you are connected to any network at all. Your wifi and signal icons are greyed out. Thats why you are getting that message.
Click to expand...
Click to collapse
Grey means connected, blue is connected to the Google servers. The OP has a connection just not to Google
So a couple days I was playing around with Titanium Backup Pro, and cleared a bunch of caches and stuff that it said it didn't need. It screwed things up and so I just restored everything and it worked fine again. I didn't realize right away though that my 3g was broken since I have wifi nearly everywhere I go, but it won't activate. I know it's not the towers since my wife's GS3 is still connected just fine.
The only time the 3g will activate is when I go and tell the phone to 'update profile'. It will show the 3g icon for a few seconds, then it will disappear again and everything will say there isn't an internet connection.
Help!
I'm using FreeGS3 v3 if it matters.
aclays said:
So a couple days I was playing around with Titanium Backup Pro, and cleared a bunch of caches and stuff that it said it didn't need. It screwed things up and so I just restored everything and it worked fine again. I didn't realize right away though that my 3g was broken since I have wifi nearly everywhere I go, but it won't activate. I know it's not the towers since my wife's GS3 is still connected just fine.
The only time the 3g will activate is when I go and tell the phone to 'update profile'. It will show the 3g icon for a few seconds, then it will disappear again and everything will say there isn't an internet connection.
Help!
Click to expand...
Click to collapse
Hey aclays,
A couple of quick questions just so I can narrow down how to help you:
What is your current Rom? Your Profile says you're running FreeGS3.
What modem are you on?
Are you on Sprint or Ting? (I saw some stuff about Ting in your post history)
What recovery are you running?
I'd say you can try flashing the latest modem/firmware (see Freez'a Thread for them) to see if that updates it. Or you can try to reflash your current Rom (after clearing cache and dalvik) to see if you can get it back that way.
Worse-comes-to-worst, you can wipe system, data, and the caches and reinstall your Rom. That'd be a last-chance scenario, in my opinion.
I'd say to connect to Wi-Fi somewhere and force hands free activation
##72786# in the dialer
topherk said:
Hey aclays,
A couple of quick questions just so I can narrow down how to help you:
What is your current Rom? Your Profile says you're running FreeGS3.
What modem are you on?
Are you on Sprint or Ting? (I saw some stuff about Ting in your post history)
What recovery are you running?
I'd say you can try flashing the latest modem/firmware (see Freez'a Thread for them) to see if that updates it. Or you can try to reflash your current Rom (after clearing cache and dalvik) to see if you can get it back that way.
Worse-comes-to-worst, you can wipe system, data, and the caches and reinstall your Rom. That'd be a last-chance scenario, in my opinion.
Click to expand...
Click to collapse
1. FreeGS3
2. I'm not sure =X I looked for the names of all the possible modems that are installed with FreeGS3 and can't find any of them in the phone info.
3. Sprint
4. CWM 5.5
I'm reflashing it right now on your recommendation, so I'll find out in a few minutes if that worked. Doh, forgot to clear the cache and davlik first though. Might have to reflash it a second time.
aclays said:
1. FreeGS3
2. I'm not sure =X I looked for the names of all the possible modems that are installed with FreeGS3 and can't find any of them in the phone info.
3. Sprint
4. CWM 5.5
I'm reflashing it right now on your recommendation, so I'll find out in a few minutes if that worked. Doh, forgot to clear the cache and davlik first though. Might have to reflash it a second time.
Click to expand...
Click to collapse
Hope that works for you.
The modems are typically not installed with the Rom. If you go into your Settings, then "About Device" you can see which Baseband (modem) you're on. In my friend's screenshot below, you can see his baseband is "MB1." You technically don't have to update your modems, some people have reported that older modems work better in their area. I prefer to have the latest, but that's up for debate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
topherk said:
Hope that works for you.
The modems are typically not installed with the Rom. If you go into your Settings, then "About Device" you can see which Baseband (modem) you're on. In my friend's screenshot below, you can see his baseband is "MB1." You technically don't have to update your modems, some people have reported that older modems work better in their area. I prefer to have the latest, but that's up for debate.
http://i.imgur.com/5R5kzpz.png[/IMG[/QUOTE]
Looks like I'm using L710VPBLJ7, I've never even thought of updating it to be honest. I might have to give it a shot to see if it improves anything in my area.
I did the force hands free activation bit and it seems to have fixed the problem! Though now I'm going to have to find that guide to remove the system update nag again.
Anyways, thanks folks!
Click to expand...
Click to collapse
aclays said:
Looks like I'm using L710VPBLJ7, I've never even thought of updating it to be honest. I might have to give it a shot to see if it improves anything in my area.
I did the force hands free activation bit and it seems to have fixed the problem! Though now I'm going to have to find that guide to remove the system update nag again.
Anyways, thanks folks!
Click to expand...
Click to collapse
You mean....the one in my sig?
I need to update it though....wherever it tells you to change the version to "MB1", change it to "MD4" instead because that's the latest
CNexus said:
You mean....the one in my sig?
I need to update it though....wherever it tells you to change the version to "MB1", change it to "MD4" instead because that's the latest
Click to expand...
Click to collapse
Oh zing, thanks for saving me the trouble yet again!
Hello,
I recently upgraded to NF4, and I noticed that while Phone Info - Samsung indicates that I'm on NF4, I can't see VoLTE settings anywhere in my Settings Menu.
Here's the Phone Info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's the Settings Menu:
Has anyone else experienced this? Any recommendations for how I can get them to show up?
Thanks in advance!
Supersanborn said:
Hello,
I recently upgraded to NF4, and I noticed that while Phone Info - Samsung indicates that I'm on NF4, I can't see VoLTE settings anywhere in my Settings Menu.
Here's the Phone Info:
View attachment 2924698
Here's the Settings Menu:
View attachment 2924701
Has anyone else experienced this? Any recommendations for how I can get them to show up?
Thanks in advance!
Click to expand...
Click to collapse
huh thats odd
NF1 here and i have that setting
USBhost said:
huh thats odd
NF1 here and i have that setting
Click to expand...
Click to collapse
Odd indeed. Not quite sure what I'm supposed to do to get it displaying...what's weird is Titanium Backup shows VoLTE settings as an item, so clearly it exists somewhere, but I definitely am not getting VoLTE calls even though I have WiFi calling working.
Supersanborn said:
Odd indeed. Not quite sure what I'm supposed to do to get it displaying...what's weird is Titanium Backup shows VoLTE settings as an item, so clearly it exists somewhere, but I definitely am not getting VoLTE calls even though I have WiFi calling working.
Click to expand...
Click to collapse
You can always try to get an activity launcher
To lunch it
USBhost said:
You can always try to get an activity launcher
To lunch it
Click to expand...
Click to collapse
So I did try it, and I get into a very technical looking configuration menu, but I haven't the slightest idea of what I should put there or if it would even work.
Supersanborn said:
So I did try it, and I get into a very technical looking configuration menu, but I haven't the slightest idea of what I should put there or if it would even work.
Click to expand...
Click to collapse
It should look something like this
USBhost said:
It should look something like this
Click to expand...
Click to collapse
Yeah, I don't have that. Not sure if reflashing NF4 would bring it back or not.
I'm on NF4, going to Settings/Device/Call I have the option to use it or not right between rejection and answering/ending.
As I stated in the thread you already mentioned this in, your CSC is missing. Flash the nf4 CSC in the op of the nf4 thread in my Sig.
Sent from my leanKernel 3.7 powered stock 4.4.2 (NF4) SM-N900T
Thanks. Flashing the CSC did fix the missing VoLTE settings. I did however notice that when I attempt to use WiFi Calling on my home network as well as many other WiFi networks, the status for WiFi calling gets stuck on "Enabling". Has anyone else encountered that?
Self serving bump...anyone have any ideas?
Supersanborn said:
Self serving bump...anyone have any ideas?
Click to expand...
Click to collapse
Try this:
1) power down your device
2) pull out sim card
3) boot device into download mode
4) flash full firmware of same version using desktop odin (unchecked auto reboot)
5) when done flashing, manually reboot into recovery (stock recovery), wipe cache.
6) when finished, power device back off and insert sim.
7) boot normally. Check to ensure volte and wifi calling are working.
8) assuming they are, you can re root and reflash any custom recovery and/or kernel you might have had.
Hope that helps!
Sent from my leanKernel 3.8 powered stock 4.4.2 (NF9) SM-N900T
On certain ROMs when you go into the phone app and select logs, all the phone numbers dialed show up and the tab is set to All Calls. Recently on the last couple of ROMs my dailer has been defaulting to missed calls as seen in the attachment. Anyone know how to change this? Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dschachm said:
On certain ROMs when you go into the phone app and select logs, all the phone numbers dialed show up and the tab is set to All Calls. Recently on the last couple of ROMs my dailer has been defaulting to missed calls as seen in the attachment. Anyone know how to change this? Thanks
View attachment 3369725View attachment 3369727
Click to expand...
Click to collapse
Are you using xposed?
pcmanager said:
Are you using xposed?
Click to expand...
Click to collapse
I am.
Here's a snippet from the past KK/Xposed days for Wanam.
http://forum.xda-developers.com/showthread.php?p=58365213
I'm thinking you also have to do that for the feature.xml in the /system/csc subfolders SPR and/or XAS, correct?
Maybe you already tried this? Let us know what works. I'm lazy; haven't tried Xposed on lollipop yet.
Sent from my SM-N910P using Tapatalk
samep said:
Here's a snippet from the past KK/Xposed days for Wanam.
http://forum.xda-developers.com/showthread.php?p=58365213
I'm thinking you also have to do that for the feature.xml in the /system/csc subfolders SPR and/or XAS, correct?
Maybe you already tried this? Let us know what works. I'm lazy; haven't tried Xposed on lollipop yet.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
My call logs always default to missed calls after installing exposed, I'm still on KitKat and I read how to fix that issue but like you I was too lazy to even do that lol. yeah KitKat ,but the great thing is my phone will never get the OE1 update which is a real PIA as I have been reading about it. I will fix the missed call log default issue after I flash a lollipop rom sometime in the future, that's if I decide to install exposed again.
pcmanager said:
My call logs always default to missed calls after installing exposed, I'm still on KitKat and I read how to fix that issue but like you I was too lazy to even do that lol. yeah KitKat ,but the great thing is my phone will never get the OE1 update which is a real PIA as I have been reading about it. I will fix the missed call log default issue after I flash a lollipop rom sometime in the future, that's if I decide to install exposed again.
Click to expand...
Click to collapse
IMO, you haven't missed much staying on KitKat. If it weren't for improved Wi-Fi calling on lollipop, I'd be back on KitKat...
Android 5.1.1= lollipop bug fixes zzzzz; I'll wait until there's a tar on Sammobile and someone verifies Odin is not crippled for stock tar downgrading. There should be a user password lock for firmware flash rather than locking out Odin and not releasing a stock tar.
Android M promises more than both KitKat and Lollipop thought about, IMO. Hope it lives up to that expectation without locking out Odin to full tars. Maybe something to not be lazy about?
Sent from my SM-N910P using Tapatalk
samep said:
Here's a snippet from the past KK/Xposed days for Wanam.
http://forum.xda-developers.com/showthread.php?p=58365213
I'm thinking you also have to do that for the feature.xml in the /system/csc subfolders SPR and/or XAS, correct?
Maybe you already tried this? Let us know what works. I'm lazy; haven't tried Xposed on lollipop yet.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
This fixed it. Thank you so much.