Develop Bugs

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

Help with bricked Note 2

Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC

AC2020x said:
Hello.. So today I attempted to flash a new version of TWRP for installing cleanrom and it bricked my phone. I can get into download mode though
So using ODIN i've been trying to install custom recoveries. Everytime it says pass, but I cannot get a recovery to show up. If I hold up, power and home buttons, the Galaxy note 2 will flash (as if its about to load a recovery) but then just goes back to galaxy note 2 screen. I can still make it to download mode, but cannot seem to get anywhere else.
Also, currently there is no rom on my phone.
Please help!
Thanks,
AC
Click to expand...
Click to collapse
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe

billyjed said:
Maybe use odin to start over fresh? Is the recovery separate from the kernel in the Note II?
Sent from my Apple IIe
Click to expand...
Click to collapse
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!

AC2020x said:
I think it is separate. The last thing I had was beanstalk with neak kernel. Then I wiped everything (not sure if that affect kernel or not) to prepare for cleanrom.
How do I use odin to start fresh?
Thanks!
Click to expand...
Click to collapse
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe

billyjed said:
Install a factory image (probably with root and custom recovery) then proceed to flash whatever from there.
Sent from my Apple IIe
Click to expand...
Click to collapse
Okay thanks,
I will have to try this after work. This may be a stupid question, but if anyone knows a good location where I can find this that would be really helpful.
I can search around for it more later.
Thanks

I bet Google knows.
Sent from my Apple IIe

SamMobile is a great site for firmwares.

After the screen turns on, let go of power and continue to hold up and home. Try it out.

johntortorella said:
SamMobile is a great site for firmwares.
Click to expand...
Click to collapse
mertin said:
After the screen turns on, let go of power and continue to hold up and home. Try it out.
Click to expand...
Click to collapse
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!

AC2020x said:
Thanks.. I'm downloading from Sam Mobile now on my laptop at work.
And thanks for the tip. I will try this out as soon as I get home. I really hope my phone isn't pertinently bricked!
Click to expand...
Click to collapse
If you need something to follow, this will help too.
Link

when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....

wase4711 said:
when you're "bricked" that means you can NOT get into download mode, so you are NOT bricked....
Click to expand...
Click to collapse
Oh sorry, I wasn't sure what the term bricked actually encompassed. I guess I was stuck in bootloop then.
Well, good and bad news. I got out of the bootloop, and finally got twrp installed on my phone. I did a recovery of beanstalk and also a fresh install of cleanrom. While they boot, they both have been going extremely slowly. Also just loading into recovery is taking super long. I don't know why. I am also not getting any signal, I can however connect to wifi. Anyone have any ideas or any thoughts on how to fix this?
Thanks again!

hey
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about

bigtomcat said:
if you can get into download mode try this find your provider and phone model and download the firware the nice thing this has root already installed so then you can just download goo and install twrp easy i always use this
http://forum.xda-developers.com/showthread.php?t=2004650
make sure you read it all so you have no problems all done with odin make sure you double check the check mark boxes well read and you will know what i am talking about
Click to expand...
Click to collapse
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.

hey
AC2020x said:
Just tried it out and it had the same problem. installed with ODIN no problem, but I still have no signal and it is still running very choppy.
When I go to mobile networks in settings it tells me "Insert SIM card to access network services" I have a sim and have tried reinserting it multiple times. I don't know whats going on. Also, it seems I do not have any internal storage. It says 200mb in storage that are fully used. When I have cleared everything but the rom.
I may attempt to return the phone tomorrow.
Click to expand...
Click to collapse
nope a lot of people have that problem you have to remove your sim card and sd card and flash again then reboot i have seen people do this 3 times to clear all the bad flashes stuck on there phones make sure to factory reset too after by being off then hold down home power and volume up when you see the words pop up let go of all but volume up get into the system setting there factory all and restart then once you give it about 10 min put you sim card and sd card back and before wipe the sd card it has been know to cause some problems if that all doesn't work then ya maybe there is something else
good luck

my Lg pad wont boot up. pls help see Image

after I tried unsuccesfull to Install a custom rom I got this msg and my lg pad wont start anymore...
can any1 help me pls? see Image at attachments.

No attachment. Do you get LG logo and bootloop? If so, don't worry mate.

CuraeL said:
No attachment. Do you get LG logo and bootloop? If so, don't worry mate.
Click to expand...
Click to collapse
there Is now. pls help me mate

Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.

CuraeL said:
Aha, did you use the wrong recovery? I'm gonna take a blind-shot and think that you did. ;/ So maybe you cannot flash CM on it. It is common mistake. - What you are seeing right now is the stock LG charging pre-system. I think you have wiped the image from the system, so it shows you the RAW data instead.
Well, let it charge to 20-25%
Then do this:
1. Unplug the tablet from charger and let it turn fully off.
2. Press and HOLD Volume Down + Power Button.
3. On LG Logo appear, ONLY release Power key, still holding Volume Down. Then quickly press and hold Power and Volume UP also. So now you hold all three buttons. So you need three fingers.
This should take you to "Factory Reset", but when you have custom recovery, you can press Power and you will come to custom recovery. I think you can mount the external SD card and then flash a new recovery. Go find PhilZ recovery in the Original Android Development sub-forum here. You just flash the Zip inside of TWRP. When that is done, reboot and repeat the steps on the top of this post, then flash CM.
Keep on trying the key combo, it is a bit tricky, but it works. While you try and get to recovery, download PhilZ CWM touch and prepare the SD card on your computer, if you have the option.
Good luck.
Click to expand...
Click to collapse
thanks for your reply.
yes I did use the wrong recovery, as a matter of fact I didnt know which one to use so I choose one randomly
the bad thing I did what u said. and nothing happened .. still stuck at the lg logo and Is not charging anymore...

Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.

CuraeL said:
Keep on trying the key combo. Hold power + volume down, when logo comes, release power, still hold volume down, then also hold power and volume up, so you hold all 3 buttons. But never release volume down.
Click to expand...
Click to collapse
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks

ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.

I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN

ANTRIK said:
hey man thanks for ur post.
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and then reset with the lg logo being stuck again :/ any luck?
thanks
Click to expand...
Click to collapse
Here is quote from someone else I found in another place but shutdown the thread without thinking.
I use the download mode to install the original official rom.
1. Download the LG MOBILE SUPPORT TOOL by this link:http://www.lg.com/us/support-mobile/lg-V500-White
2. install the software in computer, Plug in USB cable with computer, Open the software LG MOBILE SUPPORT TOOL.
3. Turn off Pad and unplug.
4. press hold both volume up and volume down, Then plug in usb cable, And then pad is in downlaod mode
5. USB driver will be insatlled automatically
6. In LG MOBILE SUPPORT TOOL, click option---.country and language-OK, then click option--upgrade recovery
7. It will installe original official rom automatically.
8. After about 1.5 hours, The pad will be installed the last official room.
^ This is a quote and now I shut down the thread, sorry, don't know who said it, just got stoked when I saw it.
---------- Post added at 03:17 PM ---------- Previous post was at 03:13 PM ----------
ANTRIK said:
I did what u said and It appears a factory reset mode and then I hit power to do a factory reset and THEN A TEAM RECOVERY STARTS AGAIN AND LG LOGO STUCK AGAIN
Click to expand...
Click to collapse
What? You got recovery booted but it restarted itself again to LG screen? If you can, just stay in recovery.

CuraeL said:
No custom recovery. Hn, we must do another thing then, wait a second. I must find a text and copy it to you from another post, brb. We must go to download mode instead when no recovery.
Click to expand...
Click to collapse
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p

ANTRIK said:
lol I was there
download mode please do not uplug...
but I turned It off
dont know how do I get there ;p
Click to expand...
Click to collapse
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa

CuraeL said:
Click on PC SYNC and download the only file, PC Suite, it has program in it. Then follow guide.
http://imgur.com/kzHc2sa
Click to expand...
Click to collapse
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi

ANTRIK said:
thank you so much man you saved my life
I did everything u said and Its working again .
In order to Install cm11 which recovery should I use? I used this one before twrp 2.6.3.0.img awifi
Click to expand...
Click to collapse
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!

CuraeL said:
Go into http://forum.xda-developers.com/showthread.php?t=2551499 and scroll down to downloads.
You are on stock ROM, meaning you wanna go and check in your system settings - about tablet for the software information. Choose one of the three: V50010a, V50010c or V500e. Download the right one for your device. Then a few lines lower, download "Loki" from the link.
Enable developer settings in your Tablet and follow the adb instructions in the thread. This is the TWRP you need to flash a KitKat rom. The older versions will fck up your device. - Remember to root before you begin!
Click to expand...
Click to collapse
hey man thanks for ur reply.
so far we are In the same page
I downloaded v50010a which Is my devIce then loki zip
but I have no Idea what Is cdm and adb I tried to open cmd and run thoose commands but I getting eroor adb not support something like that.
although I download adb.exe and fastbook and Installed It.
Is It any way to flash recovery though my tablet like goo apps or rom manager ?
thanks.

Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.

CuraeL said:
Go here, http://forum.xda-developers.com/showthread.php?t=2553192
Read first post, donwload and enable developer options on Tablet.
Then download and run the .bat file. Then you get root.
Then you go download the V50010a.lok file and you rename the file to V50010a.img instead.
Then you go to market on phone and search for "Flashify", and you flash the .img in there. (I don't use it, but many people does.)
I recommend you study a bit on adb and fastboot for another time, since if anything crashes, adb is the way to go. Not Flashify. But for now Flashify GUI should be fine. Just remember the root first.
This is the last question I will help you with since all of your questions has been in other threads and you should be able to find them in the forums.
Click to expand...
Click to collapse
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.

ANTRIK said:
YES! YES! YES!
I did It Installed cm11
thanks man for your time!
u know good things happen to good people. and u re a good guy
god will reward you!
thanks.
Click to expand...
Click to collapse
Happy to help, see you on the forums.

[Q] s4 mini doesnt work

my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please

epiczsniperz said:
my phone dosn't turn on it just flashes the Samsung when i boot it up. i need help dont know what to do
help please
Click to expand...
Click to collapse
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.

still doesnt work
sysKin said:
Boot it holding the volume up button. This should get you into so-called "recovery" where you can, among other things, restore it to defaults.
If recovery also doesn't work (which would be unusual), boot it holding volume DOWN button. This will get you into a "download" mode where you can use ODIN to flash new recovery (such as CWM recovery which is very nice and powerful), or even flash entire firmware from scratch.
Good luck, let us know how it goes ~
[edit] oh and do all that while having it connected to USB power, in case the battery is empty.
Click to expand...
Click to collapse
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please

Help!!!!
epiczsniperz said:
I tried both methods. Is my phone fixable. I messed it up somehow with Odin and I might have deleqted the software can I reinstall it onto my phone help please
Click to expand...
Click to collapse
I have the same problem , did you advance it? thx

help
cellsan said:
I have the same problem , did you advance it? thx
Click to expand...
Click to collapse
i couldnt fix it none of the steps worked. what about you?

epiczsniperz said:
I tried both methods
Click to expand...
Click to collapse
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).

stilll nothing
​
sysKin said:
Could you clarify what happens when you do those methods exactly?
I think the download mode should basically always work...
[edit] oh wait, I think I mislead you by accident (sorry!). You should boot while holding HOME and volume up (recovery) or down (download).
Click to expand...
Click to collapse
I notice no changes when I did them methods my phone still doesnt turn on

still nothing
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either

epiczsniperz said:
I downloaded recovery clockwork and installed . On oden it said pasd but now I cant access recovery booting either
Click to expand...
Click to collapse
Anything doesn't work , When I boot while holding HOME and volume up (recovery) appears the blue advice in the upper left corner and about 2 segs after the cellphone restart again, again and so on, When I boot with the down (download) the process on kies working good but when ends the cellphone restart again, again and so on. I'm start to think that something in the hardware is damage :crying:

looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)

smartxdev said:
looks like you messed something up there...
Anyway, if your phone is rooted, and/or you don't care about warranty you can get it in download mode (you said it works fine with kies until reset, so I suppose it means that download mode is at least accessible).
And after that use Odin to reinstall the stock rom completely.
Or, again with Odin install custom recovery, and then whatever ROM you like.
While working with odin, be sure to stick to the guides here on XDA. (for a custom recovery see: http://forum.xda-developers.com/showthread.php?t=2364980)
Click to expand...
Click to collapse
I have the custom stock but it still wont boot up

epiczsniperz said:
I have the custom stock but it still wont boot up
Click to expand...
Click to collapse
If you're not entirely stock you'll have trouble using Kies.
I myself had trouble when tried to revert to stock ROM from CM.
It failed to restore NANDroid backup every time, and I also didn't succeed in flashing the stock image with Odin as well.
In the end, I succeeded with this ROM (which is modified stock TW), usin ODIN. You can try this, just read and understand the instructions in the thread before you do anything.
Ironically, after a couple of days after reverting to stock rom I was so annoyed by the speed decrease compared to CM, that I reinstalled CyanogenMod back, found TouchWiz stuff I missed via separate apps, and I'm pretty happy with it ever since.
Bottom Line: anyways, if you already on custom stuff with altered warranty, you must get custom recovery working first, then it will be simple.

[Partially solved][Q] GT-N7100 download mode problem

Hello,
It's been a while since I last stepped foot in the xda forums as I've been happy with stock, however when kies pushed the 4.3 update to my Note 2 I've started having problems - my phone will not sleep. After 2 min timeout the display turns off and immediately turns itself on again. It then goes into a loop where it turns off and on again every second until I unlock it. This is playing havoc with my battery life (I only get about 6 hours from full charge now). I've tried disabling any setting that might cause this (like smart stay etc.), I downloaded wakelockdetector (doesn't detect anything), I've tested my sensors and sleep mode with #*0*# (sleep mode has the same problem here), and I've done multiple factory/hard resets (x5).
I want to go back to 4.1.2 because this problem only started happening with 4.3 except now I have a different problem - I can't get download mode to work so I can't flash any recovery/firmware. I get the download mode screen up via the usual 3-key method, however once I'm there it seems to disable my volume keys because they stop working. I can get into recovery mode without any problems and the volume keys work fine there, but once it loads up the download mode screen and prompts me to press vol up to start or vol down to cancel, no matter what I press nothing happens. I have to hold down the power key to reboot.
Does anyone have any idea why my Note 2 is so broken?
Would really appreciate some expert help here. Thanks in advance.
Other stuff I've tried: I've tried with and without my SDcard. I've tried formatting my SDcard. I've tried taking my battery out for 5 mins and then go straight to download mode, but still my vol keys won't work.
I got kies to do a firmware reinitialisation which downloaded 4.3 again and flashed my phone a second time but still the problem persists.

I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour and a half away from me. I think this will be the last Samsung product I buy.

H2D2 said:
I guess I have no choice but to put my hope in Samsung support. It's a real kick in the teeth that the nearest official support centre is an hour away from me. I think this will be the last Samsung product I buy.
Click to expand...
Click to collapse
Install cwm recovery and then stock rom
1.boot into recovery
2.wipe/data factory reset
3.wipe cache partition
4.go to advance and wipe dalvik cache
5.choose install zip from sd card
6.place the stock rom zip file
Sent from my Micromax A74 using XDA Free mobile app

ankitetah said:
Install cwm recovery
Click to expand...
Click to collapse
How?
Forgive me if I'm wrong, but with 4.3 comes with knox and a locked bootloader. I can't load philz or twrp zip from recovery because it errors with an unsigned message and since I can't access download mode I can't use odin.

Shut down your phone. pull the battery out. connect your tether cable to the phone and USB to computer. start oden, put tar file in PDA box. don't change any other settings. Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode, click on Start on oden. As for the bloatware, you are going to get whatever apps that are in the tar file. I think Some of the bloat has been removed. Not sure what, but it seems most of it is still there. I think DriveSmart is gone
Sent from my Micromax A74 using XDA Free mobile app

ankitetah said:
Put your phone in download mode by pressing both up/down volume buttons (not Power) and insert the battery. once in download mode
Click to expand...
Click to collapse
These don't appear to be the correct instructions for a N7100. Well, thanks for the bump anyway.

Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)

I have same problem
i just flash new bootloader kitkat
"Bootloader If you have MJ5 or later bootloader then no need otherwise you have to apply Reboot and wifi Fix from post #3 above
You can get idea about current bootloader with info application
If You are not worried about warranty then I strongly recommend to flash Kitkat bootloader.
Here is Kitkat bootloader from N7100_ND3 "
and now my phone was on and it will stuck on samsung logo...
i m also not able to install stock rom
help me to downgrade 4.1 old bootloader.

keltakmaster said:
Hi!
Did you try to flash with mobile odin? It might be the solution if you can't access to download mode (which is weird by the way...)
Click to expand...
Click to collapse
Thank you!
Mobile odin worked. Got the pro version to thank Chainfire. Also managed to get root thanks to Kingo and I'll be donating to them as well.
Unfortunately even after flashing CM10 it hasn't fixed my sleep problem. Well, maybe I've got a hardware fault after all...funny that it coincided with the 4.3 update. I guess I've voided my warranty now but on the bright side I've finally ditched Samsung's bloatware and stock android. Here's hoping I can find a fix.