Hello, somehere can help me to change the baseband of s6810E (by a s6810L) to make to capture 3g signal in my country.
List of things I've tried
Install via ODIN a s6810L ...
nand write start fail
Click to expand...
Click to collapse
Extract BcmCP.img and create Modem.tar ...
receive response from bootloader fail
Click to expand...
Click to collapse
Combine s6810L and s6810E firmware and create tar.md5 ...
md5 cheksum fail
Click to expand...
Click to collapse
The phone only accept a s6810E firmwares via odin
The phone already has a cwm install
Thanks
GinoXLL said:
Hello, somehere can help me to change the baseband of s6810E (by a s6810L) to make to capture 3g signal in my country.
List of things I've tried
Install via ODIN a s6810L ...
Extract BcmCP.img and create Modem.tar ...
Combine s6810L and s6810E firmware and create tar.md5 ...
The phone only accept a s6810E firmwares via odin
The phone already has a cwm install
Thanks
Click to expand...
Click to collapse
maybe you can try make tar and md5 extension with pea zip
faizauthar12 said:
maybe you can try make tar and md5 extension with pea zip
Click to expand...
Click to collapse
Thanks for your help, but I still can flash via odin a different original system.
I think another option would be to copy a model L efs partition and put it on my phone, since the only difference between these 2 models are the 3G bands.
But the efs partition is one that contains the information of the modem?
or file or folder I need to copy it from another phone settings for bands?
Did you manage it ?
I tried to do exactly like you.
Tried to repackage Latin modem for my S6810...
But could never flash a Latin Modem on this phone.
Did you manage to do it ?
Related
Hi,
I accidentally flashed the Nexus7 firmware (http://forum.xda-developers.com/showthread.php?t=2449072) on my S4 mini running latest CM10.1 nightly.
I wanted to ask, can i somehow revert that? it doesnt seem to affect anything at the moment..
these files were copied:
package_extract_file("bootloader-flag.txt", "/dev/block/platform/msm_sdcc.1/by-name/misc");
package_extract_file("bootloader.sbl2.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl2");
package_extract_file("bootloader.sbl3.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl3");
package_extract_file("bootloader.tz.img", "/dev/block/platform/msm_sdcc.1/by-name/tz");
package_extract_file("bootloader.rpm.img", "/dev/block/platform/msm_sdcc.1/by-name/rpm");
package_extract_file("bootloader.aboot.img", "/dev/block/platform/msm_sdcc.1/by-name/aboot");
package_extract_file("bootloader-flag-clear.txt", "/dev/block/platform/msm_sdcc.1/by-name/misc");
package_extract_file("bootloader.sbl2.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl2b");
package_extract_file("bootloader.sbl3.img", "/dev/block/platform/msm_sdcc.1/by-name/sbl3b");
package_extract_file("bootloader.tz.img", "/dev/block/platform/msm_sdcc.1/by-name/tzb");
package_extract_file("bootloader.rpm.img", "/dev/block/platform/msm_sdcc.1/by-name/rpmb");
package_extract_file("bootloader.aboot.img", "/dev/block/platform/msm_sdcc.1/by-name/abootb");
package_extract_file("DDR.bin", "/dev/block/platform/msm_sdcc.1/by-name/DDR");
can i just delete these files or are they used by the system? how would I be able to tell if they are used?
Thanks!
That doesn't look good. Some very important partitions might have been written to. Can you still boot it into recovery or the rom?
if the phone boot in recovery mode, the phone can be repaired;
can boot ?
I'm using the phone as usual
Hi,
Thanks for the reply.
The phone booted regularly and I am using it at the moment as if nothing happened.
So i guess I shouldn't reboot? ^^
How can I fix this? Reflash CM?
In the update script of CM I can't see these files being touched. The boot.IMG actually doesn't contain any files in /dev. Is that normal?
Thanks
Yeah those files are being written directly to partitions, which is very dangerous if they're from another device. The one you flashed in particular replaces the bootloader partitions, which might completely brick the phone and make it unbootable. I guess that if you was able to boot it after flashing it, that it didn't actually flash the partitions after all. So if everything seems ok, you should consider yourself lucky.
hy,
if the phone boot in recovery mode, then you can make a full restore factory firmware with this file:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_MULTI_CERT.tar
PIT -> CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit
the factory firmware are I9195XXUAMG8_1097013_DBT, link:
https://mega.co.nz/#!FtEjAKSY!QKwkYilDkcB43Yu1tYsBqTGsD5U-f3n3P5Uaho7bJY8
thanks
and would you recommend flashing that? would anything else be affected? (CM 10.1)
or am i "safe" ...
Thanks guys!
yes,
before flash CM 10 flash this files;
this is like installing a fresh windows os, and this will repaire your phone: inclusiv bootloaders, partitions etc
ok, and i do that by booting into download mode and flashing with odin, right?
yes ... and then you flash your firmware for your region
ok.. one last thing..
when you say firmware, what do you refer to? just the bootloader/modem? or the complete "factory image"?
does it matter if i flash a different firmware?
thanks
1. flash the files from the post #6
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
PIT -> CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523.pit
2. then you flash firmware for your region, you can take the firmware from http://samsung-updates.com/device/?id=GT-I9195 ,
in my case my region is COA, then i chose firmware with COA; in your case probably is another region, your need to find your region on the box of the phone (is something like GT-i9195ZKACOA)
3. then if you want flash again CM 10.1
please feedback if work
solution:
Hi,
so thanks bog and arcos. what i did in the end:
boot into download mode, plugin to odin
select bootloader from the factory firmware that bog posted (thanks for that!)
select phone baseband from samsung-updates latest build (because there was a newer version.. AMH4 is what i have as baseband now)
all the files that were flashed by the update.zip from the OP have been replaced basically.
i didnt bother reflashing a full rom, and it works flawlessly now.
i guess i got lucky and thanks again!
Is it possible to renew the link because the files I need urgent
Is it possible to renew the link because the files I need urgent
chokolad said:
Is it possible to renew the link because the files I need urgent
Click to expand...
Click to collapse
look here http://forum.xda-developers.com/showthread.php?t=2751224
Aronuser said:
look here http://forum.xda-developers.com/showthread.php?t=2751224
Click to expand...
Click to collapse
Sorry, but I did not see those files. Can you help me find:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
chokolad said:
Sorry, but I did not see those files. Can you help me find:
Bootloader -> BOOTLOADER_I9195XXUAMG8_1097013_REV01_user_low_shi p_MULTI_CERT.tar
PDA -> CODE_I9195XXUAMG8_1097013_REV01_user_low_ship_MULT I_CERT.tar
PHONE -> MODEM_I9195XXUAMG8_1097013_REV01_user_low_ship_MUL TI_CERT.tar
CSC -> CSC_OXA_I9195OXAAMG8_1097013_REV01_user_low_ship_M ULTI_CERT.tar
Click to expand...
Click to collapse
You need to extract the zip file
Aronuser said:
You need to extract the zip file
Click to expand...
Click to collapse
File contains only one file with the extension .md5. I need all the files without .pit file - Bootloader >
PDA > CODE...
PHONE > MODEM...
CSC > CSC...
chokolad said:
File contains only one file with the extension .md5. I need all the files without .pit file - Bootloader >
PDA > CODE...
PHONE > MODEM...
CSC > CSC...
Click to expand...
Click to collapse
i noticed that, well the repair firmwares in my thread most likely contain all files, but they are for premium users only. thats why i don't have them damn!
if you by any chance download them, please send them to me for that i can provide a free mirror in the thread! thank you in advance
Aronuser said:
i noticed that, well the repair firmwares in my thread most likely contain all files, but they are for premium users only. thats why i don't have them damn!
if you by any chance download them, please send them to me for that i can provide a free mirror in the thread! thank you in advance
Click to expand...
Click to collapse
Thank you. That's exactly what I did not.
Hi
i9190 Not Registered On Network after flash
Emergency Calls Only
how to fix this problem?
tanks
Univercell said:
Hi
i9190 Not Registered On Network after flash
Emergency Calls Only
how to fix this problem?
tanks
Click to expand...
Click to collapse
Need more info than provided. What did you flash? How did you flash it? What ROM did you have before and now? Does your IMEI number shows correctly?
TNCS said:
Need more info than provided. What did you flash? How did you flash it? What ROM did you have before and now? Does your IMEI number shows correctly?
Click to expand...
Click to collapse
i flashed with this firmware (XXUBNA1)
flash with odin 3.9
before firmware I9190XXUAMF7
after update I9190XXUBNA1
yes imei shows correctly
tanks
Univercell said:
i flashed with this firmware (XXUBNA1)
flash with odin 3.9
before firmware I9190XXUAMF7
after update I9190XXUBNA1
yes imei shows correctly
tanks
Click to expand...
Click to collapse
Any particular reason you did that?
Looks like the modem is incompatible for your area. Extract the modem file from your origianl MF7 and flash it again using ODIN. That should solve the problem.
TNCS said:
Any particular reason you did that?
Looks like the modem is incompatible for your area. Extract the modem file from your origianl MF7 and flash it again using ODIN. That should solve the problem.
Click to expand...
Click to collapse
how to Extract modem file from orignal firmware
Univercell said:
how to Extract modem file from orignal firmware
Click to expand...
Click to collapse
On a linux machine
Code:
unzip *.zip
tar -xvf *.tar.md5 NON-HLOS.bin
tar -H ustar -c NON-HLOS.bin > modem.tar
md5sum -t modem.tar >> modem.tar
mv modem.tar modem.tar.md5
Flash with Odin on "CP" button
On Windows search for TAR_MD5_PACKAGER on google
Other solutions pleaz
I've tried flash the modem via recovery, still unknown.
What can I do?
Tried to delete the efs folder and flashed the modem
the baseband is shown
but the IMEI go to 0049....
If i restore the efs, the baseband will become unknown again.
ryo2456 said:
I've tried flash the modem via recovery, still unknown.
What can I do?
Click to expand...
Click to collapse
I had the same problem when I flashed the ROM. But then I found a method to get it going. Here is what you need to do:
Step 1: Extract Modem.bin from official firmware. (I got it from Sammobile)
Step 2: Use Winrar or any other compressing software and extract Modem.bin
Step 3: Use Odin and Flash the same. (Note : You should flash the bin File in Phone not in PDA) :highfive:
Hope it works.
Special thanks to Dhiru1602 for teaching me basics
Best Regards
MàЙoЦ said:
I had the same problem when I flashed the ROM. But then I found a method to get it going. Here is what you need to do:
Step 1: Extract Modem.bin from official firmware. (I got it from Sammobile)
Step 2: Use Winrar or any other compressing software and extract Modem.bin
Step 3: Use Odin and Flash the same. (Note : You should flash the bin File in Phone not in PDA) :highfive:
Hope it works.
Special thanks to Dhiru1602 for teaching me basics
Best Regards
Click to expand...
Click to collapse
that mean I have to extract the modem.bin from the stock firmware and flash it via odin?
Extract the modem.bin?
MàЙoЦ said:
I had the same problem when I flashed the ROM. But then I found a method to get it going. Here is what you need to do:
Step 1: Extract Modem.bin from official firmware. (I got it from Sammobile)
Step 2: Use Winrar or any other compressing software and extract Modem.bin
Step 3: Use Odin and Flash the same. (Note : You should flash the bin File in Phone not in PDA) :highfive:
Hope it works.
Special thanks to Dhiru1602 for teaching me basics
Best Regards
Click to expand...
Click to collapse
Tried. Still unknown.....
ryo2456 said:
Tried. Still unknown.....
Click to expand...
Click to collapse
Flashed it in Phone or PDA?
Flash modem again in phone section.
Boot into recovery and reflash rom again.
Good Luck !!
MàЙoЦ said:
Flashed it in Phone or PDA?
Flash modem again in phone section.
Boot into recovery and reflash rom again.
Good Luck !!
Click to expand...
Click to collapse
Same. Still unknown
ryo2456 said:
Same. Still unknown
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3076993
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Murshad007 said:
http://forum.xda-developers.com/showthread.php?t=3076993
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Thanks. but it happen on lollipop rom only. I can get the IMEI and baseband on Kitkat and Jellybean.
Did u find the solution. plz post coz i have same problem.
have u tried flashing patched modem? google modem patcher v2 and patch ur modem.bin file then copy it to phone and flash it with mobile odin.
I think the key for unlock the Sim card its the modem..
How to change the modem??
Risk??
Thanks
fabioplata said:
I think the key for unlock the Sim card its the modem..
How to change the modem??
Risk??
Thanks
Click to expand...
Click to collapse
Big risk, not easy, and probably won't fix it.
extract modem.bin
Hi,
How to extract modem.bin ? I extract rom but i don't see de modem.bin...
Just :
boot.img
cm.bin
recovery.img
sboot.bin
system.img
thx
I mean
LouCroquant said:
Hi,
How to extract modem.bin ? I extract rom but i don't see de modem.bin...
Just :
boot.img
cm.bin
recovery.img
sboot.bin
system.img
thx
Click to expand...
Click to collapse
I mean, always when I flash a ROM the baseband its the same, don't change..
I think the Sim card lock it's in the baseband maybe if I change this baseband for the W8 maybe can unlock the Sim card.
Thanks
i tried installing just the modem.bin but odin fails everytime
batillojr said:
i tried installing just the modem.bin but odin fails everytime
Click to expand...
Click to collapse
Hi,
You must install the bootloader and the associate modem.
You can see this post : http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
@fabioplata I solved my problem by changing my decompression software ... now I extracted modems French providers to offer the download.
Tried that too.. It won't let me do either.. Odin ends in Fail as well
You must use odin 3.10.6 for this. I think you must choose your bootloader.tar or bootloader.tar.md5 and modem.tar or modem.tar.md5. After this, you can connect your phone for flash, only after. Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.
LouCroquant said:
You must use odin 3.10.6 for this. I think you must choose your bootloader.tar or bootloader.tar.md5 and modem.tar or modem.tar.md5. After this, you can connect your phone for flash, only after. Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.
Click to expand...
Click to collapse
done to death ! ... it doesn't work
Another problem perhaps, enable USB debugging, a cable problem , bad files ( check the source ) , the USB port of your PC , the usb drivers ...
LouCroquant said:
Another problem perhaps, enable USB debugging, a cable problem , bad files ( check the source ) , the USB port of your PC , the usb drivers ...
Click to expand...
Click to collapse
i tried 3 diff ports, 3 different modems and 2 usb cables... you name it, I tried it
---------- Post added at 10:21 PM ---------- Previous post was at 10:19 PM ----------
ive been looking for a flashable modem thru twrp , but no luck so far. ... maybe it will work idk
Do you have the modem? If so just create a flashable from it.
Do you have the steps to do that?
batillojr said:
Do you have the steps to do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2746044
Try that.
Or
http://www.droidviews.com/create-flashable-zips-cwmtwrp-recovery/
Or
http://theandrotalk.blogspot.com/2015/03/how-to-collect-flashable-rom-of-stock.html
If you get hung up let me know I maybe able to find time to build it for you this weekend or early next week.
I was trying but I'm a bit scared to screw this up .. I think I'll hold on for now ..
batillojr said:
I was trying but I'm a bit scared to screw this up .. I think I'll hold on for now ..
Click to expand...
Click to collapse
can you upload the file? i can test it on mine
I didn't make one, mostly cause the instructions are a bit different and some outdated, I didn't wanna guess it and risk bricking the phone
batillojr said:
I didn't make one, mostly cause the instructions are a bit different and some outdated, I didn't wanna guess it and risk bricking the phone
Click to expand...
Click to collapse
Do you have the modem you want to try to flash? Do you have a currently flashable modem? (Does not have to be for your device) If so open the .zip with 7zip and replace the modem.bin with the one u want to flash.
Or upload the modem you want to flash and ill make u a .zip
NexVision said:
Do you have the modem you want to try to flash? Do you have a currently flashable modem? (Does not have to be for your device) If so open the .zip with 7zip and replace the modem.bin with the one u want to flash.
Or upload the modem you want to flash and ill make u a .zip
Click to expand...
Click to collapse
this is the modem for G925W firmware is currently on my S6:
https://docs.google.com/uc?id=0BzlaMjh6ZQIWQXJKN1UyaDR3S00&export=download
batillojr said:
this is the modem for G925W firmware is currently on my S6:
https://docs.google.com/uc?id=0BzlaMjh6ZQIWQXJKN1UyaDR3S00&export=download
Click to expand...
Click to collapse
Try this.
https://www.dropbox.com/s/tcre9gy7f0kr8ih/G925W_Modem_File.zip?dl=0
Does anybody know why my a3 2017 fails to flash Nougat via odin package BL AP CP CSC im already rooted and on nougat but i want to flash all files instead of only the AP file and my model is A320FL downloaded the russia version for a320F.
khanvict90 said:
Does anybody know why my a3 2017 fails to flash Nougat via odin package BL AP CP CSC im already rooted and on nougat but i want to flash all files instead of only the AP file and my model is A320FL downloaded the russia version for a320F.
Click to expand...
Click to collapse
I don't think you can flash a full 4-file for a different model. Odin saves you a potential brick.
What was the error? pit file?
tys0n said:
I don't think you can flash a full 4-file for a different model. Odin saves you a potential brick.
What was the error? pit file?
Click to expand...
Click to collapse
Yes it was somthing with pit And so we only can flash AP nothing more ?
khanvict90 said:
Yes it was somthing with pit And so we only can flash AP nothing more ?
Click to expand...
Click to collapse
ODIN is prevening the flash to protect your device. The firmware is only partly compatible with your device. FL and F models likely have different partition sizes. This will cause a pit file failure.
khanvict90 said:
Does anybody know why my a3 2017 fails to flash Nougat via odin package BL AP CP CSC im already rooted and on nougat but i want to flash all files instead of only the AP file and my model is A320FL downloaded the russia version for a320F.
Click to expand...
Click to collapse
You won.t need to flash all the files.. Only the AP file.
But due different kernel, you will kinda break nfc and other stuff
ashyx said:
ODIN is prevening the flash to protect your device. The firmware is only partly compatible with your device. FL and F models likely have different partition sizes. This will cause a pit file failure.
Click to expand...
Click to collapse
thanks or the information mate!
MaDaLiNoSt said:
You won.t need to flash all the files.. Only the AP file.
But due different kernel, you will kinda break nfc and other stuff
Click to expand...
Click to collapse
thanks also for the inforamtion mate!!