Develop Bugs

[Discontinued]

[Discontinued]

Question....
You have tested this right? Just wondering...
Sent from my LG-E980 using XDA Premium 4 mobile app

Jammol said:
Question....
You have tested this right? Just wondering...
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sure, does it not work correctly on your device?

Works perfect. Even works with the Value Pack update and cm10.1 and 10.2. I haven't tested for original stock though.

Excellent work my friend!!! Thank you!!!!

Works great, thank you.
Sent from my LG Optimus G Pro

Touch is way off on stock ROM, very sluggish and freezes, had to use freegee to go back to 2.6.0
It did work fine on 10.2 but was a little slow.
Thanks
Sent from my LG-E980 using Tapatalk 2

Think i found the problem for the lazy behaviour. I'm going to make a rebuild on tomorrow.

Is this working for E988 version 10a build jzo54k ? I have problems installing cwm/ twrp with project freegee. It will go into a secure booting error boot certification verify message after i restart my phone. I can only install kdz to get back to stock. I can access the cwm recovery though, but i don't dare to flash anything.

Probably yes - the loki patcher lists "official" support for AT&T E980 / HK LG E988 and works also with the international E986 version.
But it has not been tested with the E988 on this recovery yet.
I also updated both install packages on the first post, please check if you could see an improvement regarding the touch/lag issue.

Jammol said:
Works perfect. Even works with the Value Pack update and cm10.1 and 10.2. I haven't tested for original stock though.
Click to expand...
Click to collapse
How are you guys getting this to work with CM10.1?
Everytime I go into recovery, the phone becomes unresponsive/freezes, even on this newest update.
I'm also looking for an alternative way to install CWM 6.0.3.7, since FreeGee won't work.

...TWRP
Nope, didn't work for me. I am rooted. went into recovery, which was a piece of cake....(thx!!)....but then, the buttons would not work correctly. such as....pressed 'BACKUP', and it went into the 'REBOOT' menu. I then went back to the free gee method.
btw - E980 here

creatvlif said:
Nope, didn't work for me. I am rooted. went into recovery, which was a piece of cake....(thx!!)....but then, the buttons would not work correctly. such as....pressed 'BACKUP', and it went into the 'REBOOT' menu. I then went back to the free gee method.
btw - E980 here
Click to expand...
Click to collapse
is there anyway to install CWM within TWRP. I can not install Stock rom as restore within TWRP.

Worked fine for me. Touch is right on the money

---

A flashable zip doesn't exist?

Works for me!
Sent from my LG-E980 using Tapatalk

mugenex said:
is there anyway to install CWM within TWRP. I can not install Stock rom as restore within TWRP.
Click to expand...
Click to collapse
Right now you have to switch from CWM to TWRP or vice versa. If you are on stock...Freegee is what you want.
After stock, you need a flashable CWM or one of the TWRP zips.
There was CWM that I saw but can't find the link. Then you can switch between them, if needed.
A dual recovery would be nice but I didn't see one for the OGP.
Sent from my LG-E980 using XDA Premium 4 mobile app

not work for me too

ADB AND debug
Heads up everyone, I was having no luck with this until I realized that I had to not only hit the check mark by 'enable USB debug..' but also tap on the option so I could choose to enable debug AND adb. Hope that helps someone.

Did I kill it? Com.Android.Phone has stopped

I rooted and used freegee to put cwm on. I tried to flash a rom but on boot it says com. android phone has stopped. I click Ok but it reappears instantly. Occasionally it also says nfc has stopped. I need all the help you guys can offer. Thanks!!!

Turn off your phone. Boot into cwm and do a restore of your backup. This seems to be a problem with the ROM, can you link to it?
Sent from my LG Optimus G using xda app-developers app

steffenbakke said:
Turn off your phone. Boot into cwm and do a restore of your backup. This seems to be a problem with the ROM, can you link to it?
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
It says no files for the back up. Basically I'm screwed? It was the Canadian cm10.2

use kdz updater to return to stock. or make a total wipe,push rom and gapps via adb and reinstall the custom rom again.

kimitza said:
use kdz updater to return to stock. or make a total wipe,push rom and gapps via adb and reinstall the custom rom again.
Click to expand...
Click to collapse
I've tried to return to stock using kdz but I click flash and 2 lines of code appear saying it started. How long should it take to flash? Right now I'm just trying to side load a stock variation. I'm just new to adb and flashing on computers.

Xoom Master said:
I rooted and used freegee to put cwm on. I tried to flash a rom but on boot it says com. android phone has stopped. I click Ok but it reappears instantly. Occasionally it also says nfc has stopped. I need all the help you guys can offer. Thanks!!!
Click to expand...
Click to collapse
That is because u have installed wrong baseband on your phone. Recover your previos stock rom and copy modem.img from it, you can find many HOW TO here on this forum. Only after that flash new ROM, copy your original EFS and modem into it.

Wrong rom or wrong kernel probably due to wrong rom. Try the above or flash a kernel appropriate for your Android version.
Sent with my thumbs using Tapatalk 4 Pro

Update to 4.4 not working.

Hi all,
I have tried to update to 4.4 from 4.3 several times but it keeps failing. My tablet works fine still. I am on jss15r, I am rooted, and running multiRom with his stock kernal. I have gotten notice 2 times that 4.4 was available for download via ota and have tried to install it. It reboots into twrp and then runs for about 30 seconds the takes me to the main menu. I have tried to upgrade manually to 4.4 via some .zip files and twrp. Nothing seems to be working. Anybody had this problem or know how to fix it??
Sent from my Nexus 7 using xda app-developers app

You to at least be on the stock rom. I was able to sideload the update through adb with TWRP.
Sent from my SPH-L710 using Tapatalk

bkwright87 said:
You to at least be on the stock rom. I was able to sideload the update through adb with TWRP.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
I am on Stock Rom, I just modified the kernal to run MultiRom. Should i revert back and then try to manually update via ADB sideload?

Everywhere that I look says you need to be on completely stock rom. I'm assuming that means stock kernel too.
Sent from my SPH-L710 using Tapatalk

bkwright87 is correct. Some people get lucky and can take an OTA through a custom recovery, but it doesn't normally work. You need to return to bone stock then take the OTA or just skip a step and flash the kitkat files manually.

prsterero said:
bkwright87 is correct. Some people get lucky and can take an OTA through a custom recovery, but it doesn't normally work. You need to return to bone stock then take the OTA or just skip a step and flash the kitkat files manually.
Click to expand...
Click to collapse
What do I flash manually.? I'm stock ROM but elementaX kernel thx
Via my NeXus™ ⅞FHD on Tapatalk pro 4.2

what good is a backup

what good is a back up of any kind if i cant ever get this phone re reboot back into recovery once i am in a bootloop.
buttons dont work, adb dont see the phone and the backup gets erased when i restore with a tot. so what good is a backup.
MOD EDIT: Removed foul language. Let's keep the language clean.

pimpeinkc said:
what good is a back up of any kind if i cant ever get this farking phone re reboot back into recovery once i am in a bootloop.
buttons dont work, adb dont see the phone and the backup gets erased when i restore with a tot. so what the fu good is a backup.
Click to expand...
Click to collapse
What are you doing to put your self into a boot loop?
Have you tried up and power... Using factory reset which will throw you into recovery.
Sent from my Nexus 7 using Tapatalk

secret.animal said:
What are you doing to put your self into a boot loop?
Have you tried up and power... Using factory reset which will throw you into recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
everytime i try a different kernel it f..s off my phone.
only been able to get pa rom and stock roms to run.
now the flash tool dont want to see my phone.
only button combo that works for me is the download mode

Leery me ask you this when you run auto-rec and the screen shuts off. Your screen gives you white lines?
Sent from my Nexus 7 using Tapatalk

no white lines,
flashing tot for 3rd time since last post.
dont know what the deal is.
stock rooted, odex deodex all work fine.
pa beta4 works unless i try to change kernels, dr87 v7, peak 6, all furnace. kill my phone.
i have had twrp and philz recoveries installed.
io root for the 20th time today, here we go

god i miss my samsung

okay, zvc deodexed killed phone, guess i spoke to soon, tot flash # 5million and 1 here we go

perfect, now phone wont even turn on. wtf is up with this piece of sh!t lg

finally got dl mode back, and flash tool fails,, phone says -s u lg-ls970 04.1.2 hrev-11-ls970zvc- im thinkins that deodexed file changed somethinig
i dont know what to do from here but i am going to take a break before i throw this thing at the wall for real.

Welcome to the LS980 struggle. ZVA and ZVC radios break Loki. You need to downgrade your aboot to get things working. My personal recommendation? If you don't have Spark in your area, tot back to ZV8 to use AOSP. Just read up in the dev section for all the caveats.
Sent from my LG-LS980 using Tapatalk

pimpeinkc said:
finally got dl mode back, and flash tool fails,, phone says -s u lg-ls970 04.1.2 hrev-11-ls970zvc- im thinkins that deodexed file changed somethinig
i dont know what to do from here but i am going to take a break before i throw this thing at the wall for real.
Click to expand...
Click to collapse
I sent you a pm
Sent from my Nexus 7 using Tapatalk

OTA update bricked my phone. Need advice

Hi all,
mt LG Optimous Pro G E988 has been working fine for 6 months,
But over night there was a OTA update, and now my phone is "stuck"
I say stuck because it will boot with the message
"Secure Booting Error"
"Cause: Device Unlock!! So Boot Sucess!!!"
then it goes into my CWM Recovery....
I had rooted with cwm
Here is where I am having the problem. It never fully installed the OTA update, because I had a boot loader installed.
I had tried to wipe everything and do a factory update, but no use.
I also tried using LG Mobile Support Tool to reflash the factory ROM
as per: http://forum.xda-developers.com/showpost.php?p=45953380&postcount=1
Yesterday when I tried it, the LG f;lash tool said it was not able to connect to the LG Server
But today the program is saying there is not enough power and may cause a problem.
I have just charged the phone for 9 hrs straight. I don't believe that it's undercharged
Is there a way for me to flash the phone with the original ROM without connecting to LG's server (using their Support Tool)?
Please help.
Thanks

Since you already have CWM installed I hope you have a backup which you can restore. Backup your apps and settings using tools like super backup or titanium. Then reload the JB 4.1.2 kdz from pc. You can look for the steps on xda forums. Once that is done successfully you will loose root. Then try official update via OTA. Or you can try to update via pc tool. Someone already shared the kitkat kdz on xda forums. You can try that too. All the best.
Sent from my X9006 using Tapatalk

DroidSK said:
Since you already have CWM installed I hope you have a backup which you can restore. Backup your apps and settings using tools like super backup or titanium. Then reload the JB 4.1.2 kdz from pc. You can look for the steps on xda forums. Once that is done successfully you will loose root. Then try official update via OTA. Or you can try to update via pc tool. Someone already shared the kitkat kdz on xda forums. You can try that too. All the best.
Sent from my X9006 using Tapatalk
Click to expand...
Click to collapse
Thanks
Unfortunately I do not have the backup anymore.
I also tried updating via the LG Mobile Support Tool, which did not work as it gives an error about not being able to connect to the server
I tried the guide from Madmack "[GUIDE] [E980] Fix soft bricks. Flash back to stock using LGFLashTools"
But I have not been able to locate the TOT file for the international E988
I tried to use the one he provided and it did not work (yea I'm desperate to try anything now)
Anyone out there have a TOT file for the international E988?
Or is there a way to crate one from the KDZ files?
please help
thanks

Not sure why you need a tot file. Kdz is fine. Look in xda for guides on loading the kdz file. That is a sure way of unbricking your phone. If it is still bricking after kdz load go jnto stock recovery and clear all caches and reboot. Most guides i have used mention this as an optional step.
Sent from my X9006 using Tapatalk

DroidSK said:
Not sure why you need a tot file. Kdz is fine. Look in xda for guides on loading the kdz file. That is a sure way of unbricking your phone. If it is still bricking after kdz load go jnto stock recovery and clear all caches and reboot. Most guides i have used mention this as an optional step.
Sent from my X9006 using Tapatalk
Click to expand...
Click to collapse
Hi im in the same problem, can any of you post a tut on how to do it

dumbrobot said:
Hi im in the same problem, can any of you post a tut on how to do it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2438088

Same thing happened to me with the value update. You have no choice but to reflash stock with the lg flash tool. I flashed mine with the telcel flashware but got brave enough before the kitkat update to flash back to att with .tot file .You should be fine once you reflash stock
Sent from my LG-E980 using XDA Free mobile app

Here is the link to the tutorial ... http://www.cellrabta.pk/2013/10/how-to-flash-big-kdz-files-optimus-g-gk-g-pro-g2-and-others/.
Note that it is not my own but a tutorial that I used successfully for my phone multiple times.
And here is the link to the XDA forum discussion that has links for the KDZ downloads ... http://forum.xda-developers.com/showthread.php?t=2438088
Hope this helps.
Sent from my N550JV using Tapatalk