Related
My phone kept looping on the loading screen, so i pulled the battery and got in CWM. When i did a data wide so i can restore from a saved file the phone got stuck on wiping.
So i pulled the battery and the phone kept on looping the samsung logo and would not go back to CWM, got inside ODIN and tried the stock one click EL29 ODIN method, everything flashes but gets stuck on data.bin. i re-start the process to only be stuck in the same data.bin step. the ODIN one click pro does not stop responding it just gets stuck.
I tried the ODIN method where i load the stock none rooted tar file in pda mode, this method completely passes but when it restarts it goes back to loop mode.
I tried getting into recovery mode but it loops also (Holding Volume up and power)
I am currently trying a different ODIN oneclick TAR file, maybe this will work, i will update when it finishes.
I do not know what to do next, i have flashed all individual files in ODIN also.
http://forum.xda-developers.com/showthread.php?t=1525495
Seriously again and you can't search.......you are bricked.....
http://forum.xda-developers.com/showthread.php?t=1504808
And you were using a ics kernel with cwm huh ?
Sent from my SPH-D710 using Tapatalk 2
I did search all over xda and androidcentral, i was in ics 4.0.4. Thanks for the links i left the phone flashing, when i get home i will read those threads. If it all fails ill just go to sprint tech bench and get a refurbish replament.
You were on a ics ROM ?
Used a ics kernel to wipe data ?
Were using ROM manager?
Using touch cwm ?
Didn't read OP for the ROM either ?
Almost all ics roms will tell you not to use a ics kernel with cwm that is the cause of the bricks ...
If you can answer yes to any of the above you didn't read enough... There are a dozen threads about bricking phones on here that would have saved your phone....good luck at sprint getting it replaced
Sent from my SPH-D710 using Tapatalk 2
mrperez816 said:
I did search all over xda and androidcentral, i was in ics 4.0.4. Thanks for the links i left the phone flashing, when i get home i will read those threads. If it all fails ill just go to sprint tech bench and get a refurbish replament.
Click to expand...
Click to collapse
What were u using to flash ? The OP of every aosp ROM Wether cm9 codename aokp all say to flash the el26 cwm kernel and flash from there and if going back to GB to use a stock tar and then go from there ...
Sent from my SPH-D710 using Tapatalk 2
i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM. but then i did the ODIN One Click and it gets stuck on data.bin.
I work for Sprint....
This is my first time ever posting on any forums and i have been flashing since the EVO came out, i have flashed ICS to the EVO 4G and back to GB with no issues, this phone is the first to give me such issues.
mrperez816 said:
i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM. but then i did the ODIN One Click and it gets stuck on data.bin.
I work for Sprint....
This is my first time ever posting on any forums and i have been flashing since the EVO came out, i have flashed ICS to the EVO 4G and back to GB with no issues, this phone is the first to give me such issues.
Click to expand...
Click to collapse
Samsung screwed us by changing some partitions and until we get source to know what they did its best to follow the OP to a T because no one has bricked when using a GB kernel to wipe or flash ....just the ics ones
Yes I had og evo nexus s and 3d ....this one sucks to have to flash the way we do but its the better phone so you do what you have to
Sent from my SPH-D710 using Tapatalk 2
You could have not said it any better lol, i on purpose broke my photon 4g and one of the replacements on the list was the E4GT and got that one sent to me lol, such an amazing phone but issues like this kill me. i did that rouge in odin and it just loops on the android with the box but does not do anything else.
Ill keep trying different things, custom count is at 3 maybe by the time i give up it might be in the 100's because i wont get a replacement till tuesday...
mrperez816 said:
You could have not said it any better lol, i on purpose broke my photon 4g and one of the replacements on the list was the E4GT and got that one sent to me lol, such an amazing phone but issues like this kill me. i did that rouge in odin and it just loops on the android with the box but does not do anything else.
Ill keep trying different things, custom count is at 3 maybe by the time i give up it might be in the 100's because i wont get a replacement till tuesday...
Click to expand...
Click to collapse
The no data tar will completely flash but won't boot on it but you can put it back to stock like that with sfhub el29 no data
Some one in the data thread I gave u did remap the data partition to his Sd card and rigged it .... That could work until you get replaced
Sent from my SPH-D710 using Tapatalk 2
Just odin the el26+cwm kernel and reboot into recovery and wipe and flash like normal. I had the bootloop before snd this worked for me.
EL26+CWM Kernel link: http://db.tt/0QJkleJR
Edit: just read your whole post and it does sound like your bricked. You can try what I stated above, but I don't think it will work.
Sent from my SPH-D710 using Tapatalk 2 Beta-5
mrperez816 said:
i had CWM, i was running ics 4.0.4 fine build 30 since it came out. It just started the stupid animation loop and thats when i decided to do a data wipe in CWM
Click to expand...
Click to collapse
This is where your /data partition got corrupted. The data wipe in ICS-based CWM.
mrperez816 said:
but then i did the ODIN One Click and it gets stuck on data.bin.
Click to expand...
Click to collapse
ODIN OneClick is just serving as the messenger to tell you your /data partition is corrupted. You could have used CWM, ODIN, ODIN OneClick, etc. They would all tell you the same thing. The EMMC memory is actually damaged, it isn't just a partition data problem.
It is unfortunate to have the issue with ICS-based kernels and custom recovery, but that is why all the threads stress using GB-based kernels with custom recovery to do your flashing.
Lesson learned. At least you work for Sprint and can probably get things resolved with less hassle.
Yeah lesson learned. I just did the repair ticket on it and will have one on tuesday.
When the new one comes i will go straight to ICS build 31, and not even mess with anything else.
Its just amazing how we cant figure out a way to format/partition the currupted /data.
mrperez816 said:
Its just amazing how we cant figure out a way to format/partition the currupted /data.
Click to expand...
Click to collapse
It isn't a format issue.
The hardware emmc memory is damaged.
JTAG bitblasting would have overwrote everything if it was fixable. That is failing in this case.
So basically you are asking why we can't reformat a hard drive that crashed and make it work.
You are doing what's right. I had to flash the one click Odin 3 times to get out of a boot loop after trying to restore a GB ROM MD5 from a ICS kernel. Learned the hard way. But if you can get to DL mode, you can usually fix it. After the third time i was able to get into standard Android recovery and do a factory data reset. Then flashed the rom again and it booted right up. I was lucky though. Hope it works out.
PHONE WONT BOOT AFTER USING ALPHA 6 ICS(darchstar)
I was using this rom since it came out and haven't had 1 problem. after just using it normally it froze. did a battery pull and tried to reboot but was stuck on logo with the cm9 animation. so i went to recovery mode i had an error. i tried doing a format and froze. so i did another battery pull and now my phone wont boot into recovery or download mode. all i get is a blue led light. any ideas?
I'd like to think that putting BIGGER red text in the OP's might help but apparently not...
Sent from my SPH-D710 using xda premium
Oops, ignore me
Sent from my SPH-D710 using xda app-developers app
xDarkStarx27 said:
I was using this rom since it came out and haven't had 1 problem. after just using it normally it froze. did a battery pull and tried to reboot but was stuck on logo with the cm9 animation. so i went to recovery mode i had an error. i tried doing a format and froze. so i did another battery pull and now my phone wont boot into recovery or download mode. all i get is a blue led light. any ideas?
Click to expand...
Click to collapse
Your /data partition is dead. Formatting/ wiping from ICS recovery is VERY BAD, it makes bricks.... time to use insurance/TEP... sfhubs post on this page applies to you as well...
Sent from my SPH-D710 using xda app-developers app
My daughter's EVO is constantly rebooting every 15-30 seconds. I can't get it to stay on long enough to run any RUU to get it back to stock to bring into Sprint. Any suggestions?
It reboots in bootloader too?
Sent from my ADR6425LVW using Tapatalk 2
Bootloader is ok, but I can't find an IMG to flash to get back to stock recovery and stock ROM, with s-on to go into a Sprint store...Google is sick of me today!
Only helpful things I can find are the RUUs which need me to get booted and stay up and running...
wineguy said:
Bootloader is ok, but I can't find an IMG to flash to get back to stock recovery and stock ROM, with s-on to go into a Sprint store...Google is sick of me today!
Only helpful things I can find are the RUUs which need me to get booted and stay up and running...
Click to expand...
Click to collapse
If your rooted,go to recovery and wipe cache and delvik,then go to advanced and fix permissions,if that doesnt help,wipe everything,but sd card and start over,this can probably be fixed without returning it.If your having problems with getting to recovery,then go through the bootloader,the old way,power off the phone then power on holding the volume rocker in the down position.
Just get latest ota from the rom page rename to ph36img.zip and put on root of sd card and let it install. That will put it back to stock. Will still be s off but sprint doesn't usually check bootloader for security status in my experiences especially since it's a hardware issue
Sent from my ADR6425LVW using Tapatalk 2
Evocm7 said:
Just get latest ota from the rom page rename to ph36img.zip and put on root of sd card and let it install. That will put it back to stock. Will still be s off but sprint doesn't usually check bootloader for security status in my experiences especially since it's a hardware issue
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Its not ph36img.zip,its PC36IMG.zip.
It will stay on in recovery, I wiped everything, fixed permissions, and did a factory reset, but after booting, it won't even stay on long enough for boot animation to finish...It's acting like a hardware problem, but I think not since it's staying up in recovery...
Diablo67 said:
Its not ph36img.zip,its PC36IMG.zip.
Click to expand...
Click to collapse
Oh ya. Couldn't remember. Haven't had my evo for a few months. My rezound is phxximg
Sent from my ADR6425LVW using Tapatalk 2
Doesn't sprint work with root privileges now? Well where I'm at they do and I keep my warranty
Sent from my PC36100 using xda premium
i think i bricked my phone , i cant boot it to home , it just stay in reboot again and again please help me
joelitow said:
i think i bricked my phone , i cant boot it to home , it just stay in reboot again and again please help me
Click to expand...
Click to collapse
What exactly is happening? Can you get into recovery or d/l mode? Do you see Samsung logo when powering on? What were you doing when it happened?
Info ppl, need info/details/processes/first born/and blood type! Lol
But seriously, only here to help and believe in trying to make light of any seemingly dire situation
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
enigmaticgeek said:
what exactly is happening? Can you get into recovery or d/l mode? Do you see samsung logo when powering on? What were you doing when it happened?
Info ppl, need info/details/processes/first born/and blood type! Lol
but seriously, only here to help and believe in trying to make light of any seemingly dire situation
sent from my t989 full of cm awesomeness and a touch of venom from the darkside!!
Click to expand...
Click to collapse
it has a jellybean rom , the i switched and , it began to do that , i can get to recovery , but i have remove root , its only on bootloop but i dont have clock work mod recovery , just normal recovery . I reste but still the same
joelitow said:
it has a jellybean rom , the i switched and , it began to do that , i can get to recovery , but i have remove root , its only on bootloop but i dont have clock work mod recovery , just normal recovery . I reste but still the same
Click to expand...
Click to collapse
....
Here
http://forum.xda-developers.com/showthread.php?t=1414341
hmmm...if you can get into recovery then you are only soft bricked, so don't fret it's okay it can be fixed. We've ALL done it at least once
Download Odin to your comp or any derivation thereof. Download your stock firmware and put your phone into download mode and flash back to stock. Or reflash whatever you were flashing, but without a custom recovery, it might get a little complex.
How did you root on stock recovery????
sent from my T989 full of CM awesomeness and a touch of Venom from the Darkside!!
joelitow said:
it has a jellybean rom , the i switched and , it began to do that , i can get to recovery , but i have remove root , its only on bootloop but i dont have clock work mod recovery , just normal recovery . I reste but still the same
Click to expand...
Click to collapse
Reflash CWM thru Odin. Then do a fresh install.
Sent from AOKP Goodness
People really need to do some research. If you don't know how to recover from a bad flash or boot loop, you should not flash anything until you do. A good rule of thumb: before you flash anything, make sure you know how to recover your phone if it borks something.
Sent from my SGH-T989 using Tapatalk 2
Dont panic, you got a soft brick so you can restore it Odin. Next time backup your current rom via Android before flashing. Get on Odin, it is your friend and will save your phone
Sent from my SAMSUNG-SGH-T989 using xda premium
It sounds like not everything was wiped so when it tries to boot up your rom, there's something conflicting it. Or maybe the system partition was wiped so you're not booting anything at all. So just odin back to stock like what everyone has been saying.
Sent from my SGH-T989 using xda app-developers app
help
Teo032 said:
It sounds like not everything was wiped so when it tries to boot up your rom, there's something conflicting it. Or maybe the system partition was wiped so you're not booting anything at all. So just odin back to stock like what everyone has been saying.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
even when i get it to download mode it turns off ! i cant do anything , its starts vibrating and stays like that forever until i take out , and then place the battery tries to boot , but turns off and starts vibrating
Towle said:
People really need to do some research. If you don't know how to recover from a bad flash or boot loop, you should not flash anything until you do. A good rule of thumb: before you flash anything, make sure you know how to recover your phone if it borks something.
Click to expand...
Click to collapse
I know from experience that you can't be prepared for everything when you are new. When I first bricked my phone I was surprised at how calm I was though. My phone would not even go into download mode without vol up/down then plug in USB. I was panicked on the inside, but xda and YouTube got me through it.
Sent from my SGH-i777 using xda premium.
PARANOIDANDROID v1.991
ranzy said:
I know from experience that you can't be prepared for everything when you are new. When I first bricked my phone I was surprised at how calm I was though. My phone would not even go into download mode without vol up/down then plug in USB. I was panicked on the inside, but xda and YouTube got me through it.
Sent from my SGH-i777 using xda premium.
PARANOIDANDROID v1.991
Click to expand...
Click to collapse
You are right but long before I make up a help I am bricked thread you should surf the web for answers. Every possible situation has been posted somewhere. Hey sorry OP not bash I g just trying to get ppl more educated before they mess with their expensive toys. If you think its done then use Insurance and get another or hit up eBay. Its a risk we all take but hope you get things sorted
Sent from my SGH-T989 using Tapatalk 2
ranzy said:
I know from experience that you can't be prepared for everything when you are new. When I first bricked my phone I was surprised at how calm I was though. My phone would not even go into download mode without vol up/down then plug in USB. I was panicked on the inside, but xda and YouTube got me through it.
Sent from my SGH-i777 using xda premium.
PARANOIDANDROID v1.991
Click to expand...
Click to collapse
I must be the odd ball out. Before I decided to even attempt rooting for the first time, I read about everything involved (cwm, superuser, etc), and read through all of the threads so I knew everything that could go wrong during the process, and how people were getting out of it. Then, before I attempted to flash any mods or custom roms, I read some more to thoroughly understand what a bootloop was, what a brick was, what order people were doing everything in to get the best results, and again, what people were doing to get out of "trouble". So, before I did anything, I knew exactly what could happen and exactly what everyone was doing in the event of a bad flash, etc. Personally, I will never flash anything to a $600 device without knowing exactly what it does or what it could potentially do if I screw up. And I always make sure I know how to get out of a bad scenario before I get into one.
playya said:
You are right but long before I make up a help I am bricked thread you should surf the web for answers. Every possible situation has been posted somewhere.
Click to expand...
Click to collapse
Well you are right about that, because I did find my answer through Google and YouTube.
Sent from my SGH-I777 using Tapatalk 2
Greetings. First off, know this isn't my first time around this merry-go-round. Jacked up my phone something good some months ago, got it working. Kept whining about needing to update the profile. Well, I locked it down hard enough that whatever app it was calling when I told it to update must've been frozen. So I did a factory reset on it.
Whoops. THAT was a mistake.
I've tried a couple different things,
Tried flashing the LS970ZV7_02.SV7_02.P25006 file onto the device.... gets to 5%, MAYBE 7%... doesn't pass it. (even after letting it attempt for ~20 minutes) ONCE it made it to the 67/85% mark, and seemed to work, but it's been quite cranky. Thinking everything was happy I put some files onto the internal storage, and attempted to switch up to CM....
On the device already, I've got the 10/5 CyanogenMod nightly files, so I wipe the device, install that.. and I can boot into CM no problem... but I don't have data or Wifi....(voice/sms seems to work though)
Attempt to flash LGLS970SPR-ZV[9 or B]-Stock files, No love.
Tried to flash LS970_TeenyBin[SBL_Unlock], works like a charm.. gives me my recovery rom, flashes within ~30 seconds.
Insult to injury, when I'm in CM, I can't get the phone to talk via ADB, but it does via recovery (have the latest ADB, installed yesterday), and when it's in TWRP, I can't seem to PUSH or SIDELOAD files of any size...
Even tried updating the LG Drivers from
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1
to
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
So right now, I can get into CM after TeenyBin.... but data doesn't work, making it a very pretty feature phone.
I can't seem flash back to stock, and i've even tried the Optimus_v2 rom, it won't install via TWRP.
Anyone got any tricks I might've overlooked?
Here's a snippet of Logcat when trying to use Wifi on CM. Keeping in mind that other devices can associate, and this very device could when it was briefly stock as well. My searches for what those reasons/status codes might mean have come up for naught though.
nericus said:
Greetings. First off, know this isn't my first time around this merry-go-round. Jacked up my phone something good some months ago, got it working. Kept whining about needing to update the profile. Well, I locked it down hard enough that whatever app it was calling when I told it to update must've been frozen. So I did a factory reset on it.
Whoops. THAT was a mistake.
I've tried a couple different things,
Tried flashing the LS970ZV7_02.SV7_02.P25006 file onto the device.... gets to 5%, MAYBE 7%... doesn't pass it. (even after letting it attempt for ~20 minutes) ONCE it made it to the 67/85% mark, and seemed to work, but it's been quite cranky. Thinking everything was happy I put some files onto the internal storage, and attempted to switch up to CM....
On the device already, I've got the 10/5 CyanogenMod nightly files, so I wipe the device, install that.. and I can boot into CM no problem... but I don't have data or Wifi....(voice/sms seems to work though)
Attempt to flash LGLS970SPR-ZV[9 or B]-Stock files, No love.
Tried to flash LS970_TeenyBin[SBL_Unlock], works like a charm.. gives me my recovery rom, flashes within ~30 seconds.
Insult to injury, when I'm in CM, I can't get the phone to talk via ADB, but it does via recovery (have the latest ADB, installed yesterday), and when it's in TWRP, I can't seem to PUSH or SIDELOAD files of any size...
Even tried updating the LG Drivers from
LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1
to
LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
So right now, I can get into CM after TeenyBin.... but data doesn't work, making it a very pretty feature phone.
I can't seem flash back to stock, and i've even tried the Optimus_v2 rom, it won't install via TWRP.
Anyone got any tricks I might've overlooked?
Here's a snippet of Logcat when trying to use Wifi on CM. Keeping in mind that other devices can associate, and this very device could when it was briefly stock as well. My searches for what those reasons/status codes might mean have come up for naught though.
Click to expand...
Click to collapse
It seems that you might not have installed the ZVB/ZVC modem. I had a hard time following your post. Sorry.
In the FAQ is the number to the modem in CM. I can't remember it off hand. In stock it's 1690
The modems are in the teeny bin thread.
Try that, then either flash teeny bins again, or use the zvb/zvc bins.
Zvb/zvc bins might be your best option. If you can wipe in TWRP prior to LGNPST you'll save your SD. If you wipe after, or in stock recovery you'll lose SD.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
It seems that you might not have installed the ZVB/ZVC modem. I had a hard time following your post. Sorry.
In the FAQ is the number to the modem in CM. I can't remember it off hand. In stock it's 1690
The modems are in the teeny bin thread.
Try that, then either flash teeny bins again, or use the zvb/zvc bins.
Zvb/zvc bins might be your best option. If you can wipe in TWRP prior to LGNPST you'll save your SD. If you wipe after, or in stock recovery you'll lose SD.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Would flashing zv7 have set the modem/radio back? Just curious because that's quite a ways back to flash
Sent from my LG-LS970 using Tapatalk 4
AFschizoid said:
Would flashing zv7 have set the modem/radio back? Just curious because that's quite a ways back to flash
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
Yup. ZV7, ZV9, and ZVB/ZVC, have their own modems. To run JB we have to run the ZVB/ZVC modem.
I saw that he flashed back to zv7, but nothing about successfully flashing ZVB/ZVC. That's why I'm thinking its a modem issue.
engine95 said:
It seems that you might not have installed the ZVB/ZVC modem. I had a hard time following your post. Sorry.
In the FAQ is the number to the modem in CM. I can't remember it off hand. In stock it's 1690
The modems are in the teeny bin thread.
Try that, then either flash teeny bins again, or use the zvb/zvc bins.
Zvb/zvc bins might be your best option. If you can wipe in TWRP prior to LGNPST you'll save your SD. If you wipe after, or in stock recovery you'll lose SD.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry, have multiple problems, solving any one of 'em would suffice..
When I install CM, I'm also installing..
cwm_geehrc4_sprint_jb_radio_modem
ulitimate apn v2 (Ting customer)
gapps-jb-20130813-signed.zip
When I'm trying to flash back to stock, obviously I can't plug in a radio patch at the same time.
I'll try the ZVB/ZVC Radio from Q11 here... just need to wrestle it onto my storage.... [sigh]
nericus said:
Sorry, have multiple problems, solving any one of 'em would suffice..
When I install CM, I'm also installing..
cwm_geehrc4_sprint_jb_radio_modem
ulitimate apn v2 (Ting customer)
gapps-jb-20130813-signed.zip
When I'm trying to flash back to stock, obviously I can't plug in a radio patch at the same time.
I'll try the ZVB/ZVC Radio from Q11 here... just need to wrestle it onto my storage.... [sigh]
Click to expand...
Click to collapse
Sounds like you're doing too much at once.
Just LGNPST ZVC or ZVB. That will give you a base to work from.
Then do your mods.
Sent from my LG-LS970 using XDA Premium 4 mobile app
engine95 said:
Sounds like you're doing too much at once.
Just LGNPST ZVC or ZVB. That will give you a base to work from.
Then do your mods.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I would LOVE to... that's one of the problems. I was able to successfully LGNPST once, and now it's getting hung up between 5-7% (when not using Teenybin
and holy hell... you're my new hero... put in the ZVC Radio...and at the very least i've got Wifi working again under CM...That alone gives me a leg-up over the other problems.
Any links for figuring out how to get the JB ADB to authenticate (since that doesn't seem to have happened)?
nericus said:
I would LOVE to... that's one of the problems. I was able to successfully LGNPST once, and now it's getting hung up between 5-7% (when not using Teenybin
and holy hell... you're my new hero... put in the ZVC Radio...and at the very least i've got Wifi working again under CM...That alone gives me a leg-up over the other problems.
Any links for figuring out how to get the JB ADB to authenticate (since that doesn't seem to have happened)?
Click to expand...
Click to collapse
I wonder if your partitions got messed up? I think those Ting apn's might be getting in the way also.
LGFlashtool might be an option to use.
As far as ADB, check the drivers, reboot both phone and computer, and see if that helps.
engine95 said:
I wonder if your partitions got messed up? I think those Ting apn's might be getting in the way also.
LGFlashtool might be an option to use.
As far as ADB, check the drivers, reboot both phone and computer, and see if that helps.
Click to expand...
Click to collapse
I also reaf u may have to open a shell command first(in adb) then it may work
FreeGee updated recently and now gives me the option to install CWM-6.0.4.7 or TWRP-2.6.3.3. Has anyone tried this yet?
morganstein said:
FreeGee updated recently and now gives me the option to install CWM-6.0.4.7 or TWRP-2.6.3.3. Has anyone tried this yet?
Click to expand...
Click to collapse
I'll tell you right now, i'm not going to try. Without knowing for sure I can have download mode back. No way
Sent from my Nexus 7 using Tapatalk
secret.animal said:
I'll tell you right now, i'm not going to try. Without knowing for sure I can have download mode back. No way
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Ha. That's what I'm waiting for.
Why aren't you wanting to try auto-rec.
http://forum.xda-developers.com/showthread.php?t=2715496
One button operation
Sent from my Nexus 7 using Tapatalk
Already answered.
Deleted.
How rude stealing my post 3 minutes before me secret.animal. lol
I have used it quite a few times and it works fine. Only thing is for me it would hang on install. I would just close the app, clear all tasks by holding down home button, run it again and it would say completed. I know that sounds weird but that used to happen on my old optimus g.
Sent from my LG-LS980 using xda app-developers app
leroybrute said:
Already answered.
Deleted.
How rude stealing my post 3 minutes before me secret.animal. lol
Click to expand...
Click to collapse
Sorry cuz, I got lucky that time.
Sent from my LG-LS980 using Tapatalk
secret.animal said:
Why aren't you wanting to try auto-rec.
http://forum.xda-developers.com/showthread.php?t=2715496
One button operation
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I've been following the AutoRec thread for a couple days and I'm a little concerned that there's no follow up yet on those white lines that some are getting. I did notice that FreeGee no longer gives me a warning about ZVC being incompatible. Any body know if this means FreeGee is now safe?
whouston.jr said:
I've been following the AutoRec thread for a couple days and I'm a little concerned that there's no follow up yet on those white lines that some are getting. I did notice that FreeGee no longer gives me a warning about ZVC being incompatible. Any body know if this means FreeGee is now safe?
Click to expand...
Click to collapse
I had no issues with autorec. But I tot, rooted then used autorec.
I'm only guessing but it could be because of that. Some that had the lines already had twrp but had broken download before they used autorec. Like I said though, it's a guess.
leroybrute said:
I had no issues with autorec. But I tot, rooted then used autorec.
I'm only guessing but it could be because of that. Some that had the lines already had twrp but had broken download before they used autorec. Like I said though, it's a guess.
Click to expand...
Click to collapse
i got white lines and I was stock rooted, ls980, 4.4.2. had to .tot back.
mtg981 said:
i got white lines and I was stock rooted, ls980, 4.4.2. had to .tot back.
Click to expand...
Click to collapse
Have you rooted again and tried autorec since?
leroybrute said:
Have you rooted again and tried autorec since?
Click to expand...
Click to collapse
I also was rooted on stock ZVC. I installed autorec and let it do its thing. First try, I could not do a backup in TWRP. It would fail everytime. Then I booted to system and thought everything was fine till the screen went off. White lines slowly appeared and stayed. Only fix was to reboot. That got boring so I tot back to ZVC and used ioroot25 to root and then installed autorec. White lines again when screen off then back on. I think waiting until the dev can figure out what is being altered on our ls980, we have to wait.
sclarktay4 said:
I also was rooted on stock ZVC. I installed autorec and let it do its thing. First try, I could not do a backup in TWRP. It would fail everytime. Then I booted to system and thought everything was fine till the screen went off. White lines slowly appeared and stayed. Only fix was to reboot. That got boring so I tot back to ZVC and used ioroot25 to root and then installed autorec. White lines again when screen off then back on. I think waiting until the dev can figure out what is being altered on our ls980, we have to wait.
Click to expand...
Click to collapse
Did you wipe cache and dalvik and try autorec again?
Seems strange that it's working fine for a lot of us and not for others.
leroybrute said:
Did you wipe cache and dalvik and try autorec again?
Seems strange that it's working fine for a lot of us and not for others.
Click to expand...
Click to collapse
I can only think there is some tweak in the modified kernel that breaks us. Ota, tot, no matter what. I can see no matter what in TWRP, but in system it fails. I gone every way.
Just have to wait a bit longer.
Sent from my Nexus 7 using Tapatalk
secret.animal said:
I can only think there is some tweak in the modified kernel that breaks us. Ota, tot, no matter what. I can see no matter what in TWRP, but in system it fails. I gone every way.
Just have to wait a bit longer.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Agreed on modified kernel.
I hope @Cloudyfa sticks around for us, to help the ones that need it. He has contributed so much to the G2 community.
My big concern is that freegee doesn't give any info as to what version of ZVC OTA it's compatible with, and neither does the autorec thread for that method. Like in the ZVA-> ZVC thread, there's a zip of the OTA... which is slightly different than getting the official OTA through system updates on the phone. So I'm afraid to try either method and end up with an unrecoverable brick because I'm on the official OTA.
Anyone on completely stock ZVC, rooted, that has successfully used either method?
agentfusion said:
My big concern is that freegee doesn't give any info as to what version of ZVC OTA it's compatible with, and neither does the autorec thread for that method. Like in the ZVA-> ZVC thread, there's a zip of the OTA... which is slightly different than getting the official OTA through system updates on the phone. So I'm afraid to try either method and end up with an unrecoverable brick because I'm on the official OTA.
Anyone on completely stock ZVC, rooted, that has successfully used either method?
Click to expand...
Click to collapse
Auto-rec works fine. The modified kernel that every app or by manual has used is the same at the time.
The worst it will do if it does not work is give you lines in your display after the screen shuts off. A reboot fixes that. But to fix completely, is to tot back to zvc and stay just rooted.
Sent from my Nexus 7 using Tapatalk
Stock rooted zvc. Auto-rec worked for me. No lines. Everything works.Just downloaded app. From download folder pressed on the app let the phone install it. Then ran it. I did not have download mode at first so reran the app and download mode worked.
secret.animal said:
Auto-rec works fine. The modified kernel that every app or by manual has used is the same at the time.
The worst it will do if it does not work is give you lines in your display after the screen shuts off. A reboot fixes that. But to fix completely, is to tot back to zvc and stay just rooted.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yep. Worked perfectly. No lines at all. Haven't tested download mode yet but system and recovery both work. Wooohoooo.
Glad to hear it worked!