[Q] WiFi Region @ Pimpdroid 2.5.0 - Galaxy Tab 3 Q&A, Help & Troubleshooting

Hi,
i'm having trouble connecting to a TP-Link Archer C2 (2,4 Ghz) when the router is set to wifi-region 'Germany'.
The device doesn't even find the WiFi-Network.
If I set the region to 'United States', the Tab3 finds the network, connects and works just fine.
Since i'm living in germany, i'd like to use the proper region-settings (concerning max signal strength, allowed channels etc).
My device is a P5210, rooted and running on Pimpdroid 2.5.0.
Are there any known Problems with the Tab3 or Pimpdroid?
Is there any Android-setting for this?
Thanks in advance
rostbart.

Related

[Q] Wi-fi N connection to Dlink DIR-655

I can't get my Note II to connect to my Dlink DIR-655 running in N-Only mode. My Blackberry Torch would connect and my laptop has never had an issue either. I have not changed anything recently and have been using this router with it's current settings for over a year without issue. The N2 sees the wi-fi network but, fails to connect once the password is entered (password verified). I can connect to other G mode wi-fi routers just fine.
DIR-655
Firmware Version: 1.35NA
Hardware Version: A1/A2
802.11n - Only
40MHz
WPA2 + AES
Anybody else experiencing this problem?
09GraySilverBusa said:
I can't get my Note II to connect to my Dlink DIR-655 running in N-Only mode. My Blackberry Torch would connect and my laptop has never had an issue either. I have not changed anything recently and have been using this router with it's current settings for over a year without issue. The N2 sees the wi-fi network but, fails to connect once the password is entered (password verified). I can connect to other G mode wi-fi routers just fine.
DIR-655
Firmware Version: 1.35NA
Hardware Version: A1/A2
802.11n - Only
40MHz
WPA2 + AES
Anybody else experiencing this problem?
Click to expand...
Click to collapse
Hi 09GraySilverBusa
I have a DIR-825 and I had almost the same problem with my note 2 but I kept getting the reauthorizing problem. I went to dlink and posted there and the thing that finally worked for me was to change from AES to TKIP.
I have my 2.4 ghz band set at n and g
Auto 20/40 mhz
Auto (WPA or WPA2)
5GHz band is set to n only with all the other settings the same.
Hope this helps
melmak99 said:
Hi 09GraySilverBusa
I have a DIR-825 and I had almost the same problem with my note 2 but I kept getting the reauthorizing problem. I went to dlink and posted there and the thing that finally worked for me was to change from AES to TKIP.
I have my 2.4 ghz band set at n and g
Auto 20/40 mhz
Auto (WPA or WPA2)
5GHz band is set to n only with all the other settings the same.
Hope this helps
Click to expand...
Click to collapse
Thanks but, I suspect your Note II is connecting via G mode. Also running in N only mode I can't select TKIP instead of AES. I'll try posting in the D-Link forum.

[Q] i9195 not connecting to wifi n 5 Ghz

Bought brand new I9195 and it only connects to 2.4Ghz, and would not connect to 5Ghz wifi.
We had I9190 and it was connecting to N 5Ghz wifi just fine. My S3 still connects to N 5Ghz fine, all PCs connect to 5Ghz fine, and only speakers connected to 2.4Ghz.
Anybody know what is the problem might be?
Phone have been updated to latest official version of software (via settings menu) and still no 5Ghz connection. Tried before update and still no connection.
need help please.
baddentist said:
Bought brand new I9195 and it only connects to 2.4Ghz, and would not connect to 5Ghz wifi.
We had I9190 and it was connecting to N 5Ghz wifi just fine. My S3 still connects to N 5Ghz fine, all PCs connect to 5Ghz fine, and only speakers connected to 2.4Ghz.
Anybody know what is the problem might be?
Phone have been updated to latest official version of software (via settings menu) and still no 5Ghz connection. Tried before update and still no connection.
need help please.
Click to expand...
Click to collapse
I've got the same problem. Anyone an idea to fix this
Tnx
Go into the router settings, and select a different 5 GHz channel. Most likely a lower one will work.
Thank you, it works now

5Ghz wifi problem

Hi, I have some problems running my fire tv with 5GHz wifi. Sometimes it lose the 5GHz wifi and i have to restart my fire tv until it finds the signal again ( i have to restart 10 times or more to find the 5ghz signal again). I have tried different channels on the router, but no one seems to work.
I know that there is nothing wrong with the router as i have 6 different devices attached to the 5GHz wifi (on channel 48) and it works perfectly.
Sorry for my english i hope u understand.
Anyone ? im running the latest custom rom , but i have the same problem on stockrom.

[Q] Regulatory domains

Can I enable the fire phone on stock ROM to recognize all the WiFi channels in Japan, whether in the 2.4GHz or 5.0GHz bands?
did you find a solution ?
I rooted the phone, but have not checked it on channel 14.

HELP! Wifi 5GHz conected without internet

Hi!!
I just bought a new tab s4, and I can not connect it to the 5ghz wifi network. It connects, but says connected without internet. The 2.4GHz network connects perfectly.
PS. Sorry for my English.
Same issue.
My tablet is TIM branded.
Same issue, it connects on 2.4ghz but not on 5ghz...
Anyone?
HI peep's mine is connected to 5 GHz and it’s working flawlessly, it’s showing a connected speed of 866MBPS!
Quick questions, did you try a reboot router and Tab S4 once connected to 5GHZ ?
Also are you using separate WPA2 PSK key ?
As some routers can’t handle separate keys, keep the Wi-Fi key same for both channels i.e 2.4GHZ and 5GHZ!
Does it get ip address from the router/dhcp server you have?
I don't have access to a 5Ghz wifi right now. Next week I'll try the tablet and I'll try everything you said. If the new tablet has the same problem of course, I hope it goes well.
speed_boy said:
Does it get ip address from the router/dhcp server you have?
Click to expand...
Click to collapse
See below and bands i have Separate bands!
Galaxy-Tab-S4
dual stack
Galaxy-Tab-S4
device info type 5 GHz
IP address: 000.000.0000 (DHCP)
MAC address: 77:EE:00:FFD:00
I have the same problem and I noticed that it came with the Anroid Pie update! 2,4G is working fine in my S4.
I have another tablet Samsung Galaxy Note 10.1 2014 edition and 5G Wifi is working flawlessly.
Might it be software issue in Android 9?
My basebandversion is T835XXU3BSF4, kernel 4.4.153-16124683 #2 Fri Jun 14 2019.
My Tab S4 was ,finally, updated to Android 9. 5GHz working fine. Both 5GHz and 2.4GHz working fine...
All good here...
I got one coming in the mail and will report back on my success but if you don't get internet trying setting your dns manually to Google's public one for testing. 8.8.8.8 Could also be related to the channel the router is using for 5ghz.
Malcolm
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
InsertCoin_Pls said:
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
Click to expand...
Click to collapse
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
1eStar said:
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
Click to expand...
Click to collapse
Yeah, I know, the device issue is that all my other phones, computers and devices are able to connect to the wifi. I enabled the smart wifi and it looks like it's going better, the tablet is able to get better download speed.

Categories

Resources