Develop Bugs

Not booting in CWM

I have flashed cwm recovery from odin but i am still unable to boot into cwm
I also tried deselecting Auto Reboot option,pulling out the battery and rebooting into recovery but it doesnt boots into recovery but just shows GT-I9082 screen and then a black screen for just 1 or 2 sec and again the GT-I19082 screen and then it starts.
So after starting the phone, when I go into recovery again,it boots in to the stock recovery.
I am on the latest firmware 4.2
Guys please help me

U have to re flash
Sent from my GT-I9082 using xda app-developers app

which recovery did u flash?

SSKSSK said:
I have flashed cwm recovery from odin but i am still unable to boot into cwm
I also tried deselecting Auto Reboot option,pulling out the battery and rebooting into recovery but it doesnt boots into recovery but just shows GT-I9082 screen and then a black screen for just 1 or 2 sec and again the GT-I19082 screen and then it starts.
So after starting the phone, when I go into recovery again,it boots in to the stock recovery.
I am on the latest firmware 4.2
Guys please help me
Click to expand...
Click to collapse
You need to flash Fix-recovery.zip after flashing custom recovery so that it doesn't keep reverting to the stock one and to give it permissions to alter your system when you flash ROMs.
Take appropriate .tar file recovery (for 4.2.2) to be flashed from odin from here : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this: http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19

iceyhotguy said:
You need to flash Fix-recovery.zip after flashing custom recovery so that it doesn't keep reverting to the stock one and to give it permissions to alter your system when you flash ROMs.
Take appropriate .tar file recovery (for 4.2.2) to be flashed from odin from here : http://forum.xda-developers.com/showthread.php?t=2315529
Then follow this: http://forum.xda-developers.com/showpost.php?p=46395577&postcount=19
Click to expand...
Click to collapse
OK will follow the tutorial and will post the results
Thanks for you reply

The tutorial which I followed --
HTML:
http://forum.xda-developers.com/showthread.php?t=2160671

Thanks icehotguy!!!
Successfully rooted!!!!

[Q] Cannot mount /data

Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me

Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R

Ripshock said:
Maybe it's a bad download or try flashing philz cmw then do clean install to flash a new rom then flash any rom
Brought to you by SM-T210R
Click to expand...
Click to collapse
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice

brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Is your device rooted?
Brought to you by SM-T210R

Ripshock said:
Is your device rooted?
Brought to you by SM-T210R
Click to expand...
Click to collapse
yes rooted ,

brajesh0201 said:
yes rooted ,
Click to expand...
Click to collapse
Android-armeabi.universial-root.zip used this package to root

brajesh0201 said:
tried now , getting same error
E: could not mount /data to setup /data/media path !
Please advice
Click to expand...
Click to collapse
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.

bierma32 said:
Have you make a backup befor you flashed The Rom?
For this Rom you need always The newest Recovery Version,depent of New updater script.
Can you go to The recovery , make a factory reset and wipe cache / dalvik.
Then go to download mode and flash Stockrom again.
Then flash Philz recovery, after flash Boot manuly into recovery make an backup and now reboot your Tab Into recovery make an fullwipe and flash your New Customrom.
Click to expand...
Click to collapse
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure

brajesh0201 said:
I tried the above method , no luck
if i flash stock firmware i stuck with an samsung logo and if i flash custom rom i stuck with an android boot image ...
i am not able to wipe in PhilZ recovery i am getting the error cannot mount /data and cannot mount /data/.androidsecure
Click to expand...
Click to collapse
Im using philz tuoch and i habe no prob.
At philz have check The Mount point (sdcard or sdcard/0 )
If these all not hell flash CWM.

I have no clue what i did with it, but this is on the screen:
Odin Mode
Product name: SM-T210
Current Binary: Custom
System Status: Custon
HW REV: 0x5
It has an image like: Tablet......Yellow triagle with an ! in it.....Computer.
Under that it has the text: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. But Kies can't connect to the device. I have no clue what i did all ....
Experts please help !!!

hey
in philz recovery, in wipe options select - clean to install new rom
the goto tab 3 7.0 area get svelte rom , you need to put it on removable microsd with card reader [get one]
the put card back in tab reboot to recovery and flash, firmware updates aren't always good or necessary,
odin should be a last option. stay calm [use the force] and good luck :good:

brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
here is the solution of your prob, i font it in the lt02 Thread
bierma32
Post#352 and following Posts.
http://forum.xda-developers.com/showthread.php?p=53154386
Quote:
Originally Posted by*jstath1972*
In the first attempt i made a dalvik cache, cache, system wiping. I installed the rom and made again a dalvik cache, cache wiping and reboot. Then was saying "no Root. Would you like to flash super user in to system?" and then nothing. I made re install for second time the same rom zip with the default "Factory Reset" and everything went fine. Weird ha ? I also use TWRP 2.7.0.0 .*
I hope to help.*
Its funny its only work when you factory reset, My guess would be that something wrong with twrp or updater script.*
Maybe @gr8nole*will know more bout this issue.*
Sent from my Galaxy Nexus using Tapatalk

brajesh0201 said:
Hi Guys,
i am using samsung galaxy tab 3 sm-t210 model 7.0 wifi ..
i tried to flash the custom rom and followed the instruction in this forum http://forum.xda-developers.com/showthread.php?t=2754479
I have follwed the instructions from this forum http://forum.xda-developers.com/showthread.php?t=2437219 for an custom recovery and tried to flash the rom ...
when rebooted i am stuck up with an android screen for an hour..
later i downloaded the stock firm and flashed the firm with odin3.09 but now i am stuck up with samsung logo for an hour....
flashed twpr recovery and tried to install custom rom i am getting an E:/cannot mount /data error and i cam not able to flash any of the roms ,
experts please help me
Click to expand...
Click to collapse
try to flash the stock ROM Android 4.1.2 ( Jellybean ) from page www.sammobile.com and flash it with odin 3.07 , after you flash with odin sees the recovery of stock and give ' Wipe Data / Factory Reset ' ' and the problem is solved ( I run my me :good: ) and sorry for my bad English that use a translator :silly:
( and the solution suddenly discovered )
I just hope it works for you you too

[Q] My T110 won't boot after installing CWM

So I followed the instructions from this thread: http://forum.xda-developers.com/showthread.php?t=2674649 to install CWM and it went fine but when I got out of the CWM recovery menu and rebooted it just rebooted back into the recovery.
Then I guessed it was fine because I was going to install this rom anyway so I followed the instructions and did a factory reset and then tried to install the rom from the zip.
But then the installer failed saying "format() expects 5 args, got 4 - Installation aborted" and I'm stuck with just the recovery menu.
Does anybody know how to bring it back to life?

Here you will find the solution for your problem.
http://forum.xda-developers.com/showpost.php?p=51488666&postcount=778

bierma32 said:
Here you will find the solution for your problem.
http://forum.xda-developers.com/showpost.php?p=51488666&postcount=778
Click to expand...
Click to collapse
Thank you so much. This post should be mentioned in the troubleshooting or something I guess it's not that uncommon
EDIT: The ROM flashed correctly but it still loops into the recovery

jcalve28 said:
Thank you so much. This post should be mentioned in the troubleshooting or something I guess it's not that uncommon
EDIT: The ROM flashed correctly but it still loops into the recovery
Click to expand...
Click to collapse
one question, have you install the quick boot app?
I think the onlyest way for you is flash the stock rom with Odin.
full reboot
flash the recovery with Odin,after flash boot with the button comby into recovery and flash the superSu.zip from chainfire
reboot your tab
open SuperSu.app and you have got root
Dont install the Quick boot app !!!!!
That was the way what works for me.

bierma32 said:
one question, have you install the quick boot app?
I think the onlyest way for you is flash the stock rom with Odin.
full reboot
flash the recovery with Odin,after flash boot with the button comby into recovery and flash the superSu.zip from chainfire
reboot your tab
open SuperSu.app and you have got root
Dont install the Quick boot app !!!!!
That was the way what works for me.
Click to expand...
Click to collapse
I don't know what the quick boot app is so I guess I don't have it.
How do I flash a rom with odin and where do I get the superSu.zip from?

Solved
Okay I solved it.
I flashed the stock rom from here: http://forum.xda-developers.com/showthread.php?t=2780068 (the full version no the lite)
using Philz Touch: http://forum.xda-developers.com/showpost.php?p=50922322&postcount=4
And then I just rebooted the system and it took a long while but it finally went past the welcome logo and started fine

[Q] CWM Recovery not permanent

I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?

cyb3r.pr3dat0r said:
I was trying to install CWM recovery on this phone , I used Odin to flash recovery . I flashed recovery then removed battery and then booted to recovery then CWM loaded but as soon as I restarted the phone and again tried opening recovery phone took me to stock recovery , how can I solve this? I am running 4.2.2 firmware . And also I tried flashing CM11 with this temporary CWM but package installation stopped because of a error (status 7) saying some problem with partition , I was not rooted at the time . Is root needed to flash CM11 ?
Click to expand...
Click to collapse
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.

Trilochanaaya said:
1. Once u boot into CWM recovery flash SuperSU (If u don't have get it from here). This will ensure that the recovery doesn't revert back to stock.
2. Status 7 error has various reasons. Ensure that u r using most latest recovery and perform clean install.
Click to expand...
Click to collapse
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?

cyb3r.pr3dat0r said:
it was telling me some error with partition like eemc when i flashed cm11 , can this be due to because i was't rooted?
Click to expand...
Click to collapse
First of all root your device.
Secondly install philz recovery using odin.
Then flash your desired ROM
(i suggest you aogp dual sim).
PM me if you need any help.
All the best :thumbup:
Press thanks Button
Sent From AWSOME AOGP ROM for I9082

emmc is a partition i believe, if you see such errors, recheck if you are using the correct recovery... I flashed my tablet with wrong recovery and it wiped out all my partitions. It's as good as a brick now if not worse.

S4 Mini Softbrick

First time flashing ROMs, installed resurrection remix tryed to install Gapps which failed, yet RR booted up on its own just fine. Then tried to flash a new recovery on it (TWRP 3.0) yet the phone would just never boot up to complete the recovery install. So now i have a phone which wont enter recovery mode and cannot complete the download of the new recovery.
TLDR: Phone wont boot into recovery as ROM is broken so download cant be fixed?
Previous: recovery TWRP 2.6
Phone: Samsung Galaxy S4 GT-19195
Any help would be really appreciated!
Thanks

Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.

bierma32 said:
Are you sure that you have flashed the right Recovery for your Phone.
Normally the way is.
Boot into Recovery
Install the Recovery .zip file
Reboot into Recovery.
Reboot into System ( ROM )
Can you post a link where you download the Recovery and which file.
Click to expand...
Click to collapse
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.

IronRoo said:
That would only work from TWRP ver 2.8.4, I think you missed he is still on very old TWRP or maybe he edit later , he would have to install with Odin method
@Spec77
If you can boot into download mode you should be able to flash new recovery with Odin method (NOT use zip file).
As Bierma suggests maybe you flashed wrong TWRP does your phone have another letter and after gt-19195 if so it is a different phone & you need different TWRP. Or maybe you just tapped wrong link.
Click to expand...
Click to collapse
This way works also if you come from a CWM or PhilzTouch Version.
If you come from TWRP =>2.8.4.0 than you can flash an *.IMG File ,but you can flash on all Versions a *.zip file.

Managed to fix the brick
Thanks for the help, I managed to fix it by installing TRWP 3.0 from ODIN, and now that i have that I'm fine
Thanks!