Related
i tried to install an update of ROM on my wildfire S..
during the setup it said there is connectivity problem.
the phone went off at that time.. after that it never went live again in any mode..
neither volume down + power worked.
i am very much beginner to android or htc. please help me with a full tutorial or
guide how to fix this.
here is the link to ROM update that i was trying to install
dl3.htc.com/application/sync/htc_sync_3.01.573.2_us_cellular.exe
plz...
and one more thing. its orage lite on front screen starts flashing when i plug in the charger/data cable. i check the battery voltage, they're 4.02v, so i guess the battery is full charged. if i remove the battery and the reinstall it.. the orange lite doesn't blink unless i put the charger again.
i've gone through other threads that seems to have same problem but i could not understand much of the terms used in those.. so plz i need a detailed help
Can you feel 3/5/7 vibrates when holding power button?
What did you try to do actually?
It's a phone sync software and not a ROM update which you have mentioned.
It seems that there might be problem with your battery. Check it first.
droid000 said:
Can you feel 3/5/7 vibrates when holding power button?
Click to expand...
Click to collapse
there is no vibration or any response when i press power buttons or volume down + power button.
Senthamil said:
What did you try to do actually?
It's a phone sync software and not a ROM update which you have mentioned.
It seems that there might be problem with your battery. Check it first.
Click to expand...
Click to collapse
here is the screenshot... i don't know it seems like a rom update which i tried to install..
a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/574971_3934468114092_288541232_n.jpg
u said it could be a battery problem... the battery was working fine a minute ago.. how could it suddenly got rotten.
the forum doesn't allow me to post link.. so plz copy paste the above url to see the image
Did you root phone earlier? or
Is your phone's Bootloader unlocked?
If your bootloader is unlocked and your device rooted, install CWM Recovery via ADB, then download your ROM as a ZIP and install using CWM.
If you're not unlocked/rooted, do that first, again via ADB.
jsthorpe said:
If your bootloader is unlocked and your device rooted, install CWM Recovery via ADB, then download your ROM as a ZIP and install using CWM.
If you're not unlocked/rooted, do that first, again via ADB.
Click to expand...
Click to collapse
the phone won't boot so he can't do either
Sent from my HTC_A510c using Tapatalk
kagevazquez said:
the phone won't boot so he can't do either
Sent from my HTC_A510c using Tapatalk
Click to expand...
Click to collapse
i guess the phone it is now useless because another guys says that
"Its bricked if you cant boot to hboot with vol-d + pwr. Srry only way is to send to htc"
so i guess that's the end of it
today i pressed both vol + and down and pressed power button.. the phone gave 7 vibrations and its LED turned on.
what does that mean? is there way to fix it somehow?
Welcome all Huawei Acend G300 users, this is a full guide prepared by me which will help you unlock your bootloader and not only that but it will help you gain root access for system modifications and root required applications.
Click to expand...
Click to collapse
Keep in mind, this method is not confirmed working if you're running android 2.3.x [ Gingerbread ]. So do not use this if you're running it. Also dual sim ones aren't supported from what I see it tempers with the phone, I haven't tested it but many have reported it doesn't work on dual sims.
Lets get started shall we? Firstly I have gathered up some useful resources that will help you get started. Make sure you read this guide first, from top to bottom. Then continue. As you must have a clear understanding on what you are going to attempt. If you have any queries don't hesitate to ask on the thread itself.
Click to expand...
Click to collapse
I have performed these exact steps and have successfully unlocked my bootloader and rooted the phone. So if you're worried. Don't be. After attempting this I haven't noticed any issues either.
Okay, first of all you will need to download Unlockbootloader ---> View attachment unlockbootloader.zip
Once you have downloaded the said .zip extract the .exe file inside the .zip to your desktop.
Continue by turning on USB debugging on your G300. if its already switched on then skip the part below..
Go into Settings>Developer Options and tick the USB Debugging option.
Once its switched on, plug your phone to the computer using a USB cable.
So far you've downloaded Unlockbootloader, have switched USB debugging on, and your phone is connected to your PC.
Now run the .exe file you have just extracted. Click "Root" and let it do everything, it will prompt up with a few warnings saying don't use your keyboard because CMD is running.
Once the setup finishes, your phone should be rooted.
Head into the app drawer, and if you see "SuperUser" you're now officially rooted.
Reboot your phone to finalize the rooting and exploits.
Ok, now for the bootloader.
Once your phone is on, and connected again to the PC with debugging mode on, run the .exe file again and this time click "Unlock BootLoader".
Wait for it to do its job, once done reboot again and you now have a Stock Rooted and Bootloader unlocked ICS phone.
Click to expand...
Click to collapse
If this Guide helped, don't hesitate to hit the thanks button.
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
jon sawyer said:
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
Click to expand...
Click to collapse
Settings>applications>development>usb debug
Sent from my HUAWEI U8815 using Tapatalk 2
Can't Root
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
Hi, assuming you have installed the g300 adb drivers, once the device is hanging on the boot logo and you connect the usb cable. You need to wait for windows to fully the load the adb driver before you use the unlockbootloader.exe program.
EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
What you have to do is,turn on debug, then power off device fully by pulling off battery then putting it back in, now you must power on by golding the volume down button and power button at the same time, this should get it to be stuck on the huawei logo screen, now plug in your USB cable and wait for you PC to detect the phone and it should automatically install the devices driver's, one its done the now open the folder and run .BAT files, If you are experiencing problems here's a link for another guide : View
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
biscuitpt said:
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
Click to expand...
Click to collapse
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
krishneelg3 said:
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
biscuitpt said:
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
Click to expand...
Click to collapse
This is for ics mate.not gb.
Go to modaco
Ways to fix. Flash ota update b927 ...
Sent from my HUAWEI U8815 using Tapatalk 2
bootloop :/
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
evotaz said:
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
Click to expand...
Click to collapse
Turn ur phone completely off. By pulling out battery then apply the battery again.
Now hold volume down and power button and it should be in boot loader mode. If ur logo is stuck well this is in boot loader if not and it continues well.. idk
Sent from my Ascend G300 using Tapatalk 2
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
petar17 said:
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
Click to expand...
Click to collapse
What was ur baseband and were u running gingerbread?
If u r on official ics then this guide is for u, if not notify me.
PS : If you are running Gb I refer you to look into this guide, as long as your phone can boot into bootloader your fine, and I'm sure it will boot into Bloader mode : http://www.modaco.com/topic/353386-how-to-root-your-huawei-ascend-g300-for-windows-mac-and-linux/
Thanks krishneelg3,
my baseband is 109808, and I'm running GB.
The problem is that I don't know if I'm in a Bootloader mode when I see a pink screen?
When I press VOLUME DOWN + POWER it starts same as when I press POWER, first logoo (in my case picture of my operator) it lasts for about few seconds, then phone reboots and start doing it cyclically.
The other thing is that, when I press VOLUME DOWN + VOLUME UP + POWER, it then turns into a pink screen.
In that state (pink screen), when I plug in my phone to my PC, PC recognize my phone without reading sd card or internall memory.
So what should I do?
Thanks man, really appreciate it!
Guys,
I solved the problem.
I've just followed the instructions in step 5. on the site http://huaweig300.com and put a new update.app (1 KB) and copy it to the dload. After that I've used main dload (ICS folder, aprox abot 600 MB) and everything updated and installed successfully.
Thanks.
p.s. if anyone has or had the same problem, do not hesitate to ask.
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
stringman said:
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
Click to expand...
Click to collapse
OK get the official pics update b927* must be that build.
After its done downloading, extract its contents to your memorycard of the phone.
Make sure the update.app is in the root of SD card .
Then power off phone, remove battery re apply battery and hold the three buttons "volume up, volume down and the power button" until a screen pops up it will then install the stock ics once its done it'll reboot twice.
If only one it doesnt matter.
Setup the phone. Now to install b934 or newer versions use cwm for dazzozos repacks or the update force method. But I advice u to look for help on modaco. Thanks.
Modaco name : krishang3
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
stringman said:
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
Click to expand...
Click to collapse
Your on gingerbread so your baseband Is 109808 and if u flash any b934+ stock using the combinations say goodbye to your phone. I did that to my brothers and it bricked.
So to get to ice you must install b927 version of ics then your baseband will change to the new one *2030* now you can flash any b934+ stocks because you now have the new baseband.
Go to modaco and enter the G300 forums and look at the first dew pages all the info and guides you need. Procedure is simple.
The bootloader stays locked, you can't install any custom recovery or ROM after rooting this way. To install a custom recovery or ROM you have to unlock the bootloader.
So I've found this thread in an Italian forum, which describes a rooting method that doesn't require a bootloader unlock code from Huawei!
This pack containes an Italian guide and everything you need for the procedure.
If you don't speak Italian, then follow my instructions.
0. Make sure fast boot is turned off on your phone
1. Extract the downloaded .rar file to anywhere you want.
2. Copy the "dload" folder to the root of you SD card.
3. Turn off your phone, then turn it on while holding down (Volume UP) + (Volume DOWN).
If the firmware update is finished you will get a green tick. The phone will reboot, be patient.
If you get a pink screen, then put the "dload" folder into the Internal memory's root to solve the problem.
4. Install unlockroot3.exe, then open it after the installation is finished. (Get a newer version of Unlock Root from unlockroot.com)
5. Enable USB Debugging on your phone at Settings --> Developer settings, then plug the phone to your PC.
6. The PC will recognize a CD drive. Install Handset WinDriver.exe from /drivers/adb_driver/.
7. Click the big, green "ROOT" button. When it asks, decide if you want "Power saver" to be installed to your device or not.
8. After the process is finished, it will ask if you want to reboot. Click Yes.
9. After reboot you should see Superuser installed to your phone.
10. If you get errors (camera, flash not working) or the screen looks like it's been washed out with bleach,
Then run install-windows.bat from the folder named "Y300-boot-B176". This should solve the errors.
This method is tested with the following firmware versions:
B164, B166, B169, B170, B171, B172, B173, B174, B175, B176, B178, B181,
B184, B186, B188, B189, B190, B192, B194, B195, B196, B197, B199
Huge Thanks to Carontes from androidiani.com!!
Hit Thanks if it helped!
working
milangfx said:
So I've found this thread in an Italian forum, which describes a rooting method that doesn't require a bootloader unlock code from Huawei!
This pack containes an Italian guide and everything you need for the procedure.
If you don't speak Italian, then follow my instructions.
1. Extract the downloaded .rar file to anywhere you want.
2. Copy the "dload" folder to the root of you SD card.
3. Turn off your phone, then turn it on by holding down (Volume UP) + (Volume DOWN).
If the firmware update is finished you will get a green tick. The phone will reboot, be patient.
4. Install unlockroot3.exe, then open it after the installation is finished.
5. Enable USB Debugging on your phone at Settings --> Developer settings, then plug the phone to your PC.
6. The PC will recognize a CD drive. Install Handset WinDriver.exe from /drivers/adb_driver/.
7. Click the big, green "ROOT" button. When it asks, decide if you want "Power saver" to be installed to your device or not.
8. After the process is finished, it will ask if you want to reboot. Click Yes.
9. After reboot you should see Superuser installed to your phone.
10. If you get errors (camera, flash not working) or the screen looks like it's been washed out with bleach,
Then run install-windows.bat from the folder named "Y300-boot-B176". This should solve the errors.
This method is tested with the following firmware versions:
B175, B169 (Italian Wind branded)
B174, B176 (no brand)
B178 (Hungarian Telenor branded)
B173 (Hungarian T-mobile branded)
Huge Thanks to Carontes from androidiani.com!!
Hit Thanks if it helped!
Click to expand...
Click to collapse
:good::good::good::good::good::good:
Can I use this guide to root Huawei Y300-0100 ?
cheers !
j00k3r said:
Can I use this guide to root Huawei Y300-0100?
Click to expand...
Click to collapse
Yeah, it should work. This guide is tested with Italian and Hungarian devices (these are the ones I know about); All the European phones have model number: Y300-0100, so you should give it a try.
What is your build-number? B1xx?
it’s B178, I will try later today and put here my results,
thank U for guide and info,
cheers!
//edit: it's working for me, love this phone anyway, now even more...
Sent from my HUAWEI Y300-0100 using Tapatalk 2
Perfect! Ascend Y300 unrooted.
b166
Can I use this with B166? Thanks for your replies.
nineswordz said:
Can I use this with B166? Thanks for your replies.
Click to expand...
Click to collapse
I think it works with all Y300 models.
Try it, and if it works, I'll update the 1st post.
Working!
milangfx said:
I think it works with all Y300 models.
Try it, and if it works, I'll update the 1st post.
Click to expand...
Click to collapse
Hi, it works. there's a little issue though..after rooting and after running the "install-windows.bat" to fix the camera, the phone didn't recognize the sim card. the trick is to restart the device and it's good to go.
So this is verified working with B166. Thanks for the guide. :good:
All we need now is a good custom ROM.. :fingers-crossed:
NineSwordz, PH
Not sure if that guide is wrong or not, but holding volume + and - doesnt power on my y300 at all.
Don't u mean power button + the 2 volumes buttons?
-MB- said:
Not sure if that guide is wrong or not, but holding volume + and - doesnt power on my y300 at all.
Don't u mean power button + the 2 volumes buttons?
Click to expand...
Click to collapse
Yea, 3 buttons at once, thanks for pointing that out. Sorry for that, English isn't my native. Corrected.
Oddly, doing that only boots intop android very fast, doesnt instal any update.
Do i need to copy the dload dir to sd card root or the file in it?
EDI|T: Oops I saw i had fastboot enabled, disabling did the trick
And its rooted, B171 version.
-MB- said:
EDI|T: Oops I saw i had fastboot enabled, disabling did the trick
And its rooted, B171 version.
Click to expand...
Click to collapse
Thanks for the info, I updated the 1st post.
Confirm working on build B164. Just need to use the install-windows.bat to fix the camera and washed screen issue. After that need to do a manual reboot to recognize sim.
XDA-RK said:
Confirm working on build B164. Just need to use the install-windows.bat to fix the camera and washed screen issue. After that need to do a manual reboot to recognize sim.
Click to expand...
Click to collapse
The same thing with my b178,
i need recovery input now, i want try some custom rom.
Or some other way to change rom
Poslato sa HUAWEI Y300-0100 koristeći Tapatok 2
I'm not sure, but I guess you can't flash custom recoveries after using this method, because the BL remains locked.
Is there anyone who tried flashing TWRP after using this guide?
milangfx said:
I'm not sure, but I guess you can't flash custom recoveries after using this method, because the BL remains locked.
Is there anyone who tried flashing TWRP after using this guide?
Click to expand...
Click to collapse
I think that to. How to unlock BL.
Poslato sa HUAWEI Y300-0100 koristeći Tapatok 2
briferboy said:
I think that to. How to unlock BL.
Poslato sa HUAWEI Y300-0100 koristeći Tapatok 2
Click to expand...
Click to collapse
http://huawei-y300.tumblr.com/post/47366836617/how-to-unlock-and-root-huawei-ascend-y300-all
milangfx said:
http://huawei-y300.tumblr.com/post/47366836617/how-to-unlock-and-root-huawei-ascend-y300-all
Click to expand...
Click to collapse
I try to send my phons data , but every time i recive that data is not ok.
Poslato sa HUAWEI Y300-0100 koristeći Tapatok 2
briferboy said:
I try to send my phons data , but every time i recive that data is not ok.
Poslato sa HUAWEI Y300-0100 koristeći Tapatok 2
Click to expand...
Click to collapse
You have the Y300-0100 version, right? Try using this form instead of the email.
Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.
Are you able to use adb?
If yes, try to flash twrp recovery via ADB.
Instructions in forum thread. (I think 2nd post)
Sent from my P6-U06 using xda app-developers app
Larsbehrens said:
Hey guys,
I was running blueandroid custom rom on my p6 and it was all working fine. suddenly my phone shut down and since that moment i can't find a way to turn it on further then the huawei logo. pressing all three buttons for the forced update doesn't work. and i can't get in recovery. It simply doesn't make it till that point. sometimes it shows a random color (the whole screen) but most of the time it just shuts down at the huawei logo... i also tried fastboot but it doesn't get recognized...
could anyone help me?
i'd really aprecciate it.
Click to expand...
Click to collapse
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.
bokchoi2020 said:
Is your p6 low on battery? If it is, charge it up before trying to get to recovery.
Click to expand...
Click to collapse
It doesnt charge ( the led doesnt turn on and im pretty sure that doesnt) and i havent been able to try adb. Its also quite strange that it wont be in a stable recovery mode ( or fastboot mode) since it turn itself off after 10/20 seconds.
getting really lost
So guys,
i'm really starting to think i need to bring mine to the service center cus it's completely dead.
it won't charge, it doens't get into recovery mode, i can't flash the official firmware with the sdcart/dload/update.app way, i can't fastboot it cus it won't go in fastboot mode (the way it get stuck on the splash screen/huawei logo), and it shuts itself down after 20 seconds leaving nothing else then a black but brightened screen.....
i'm afraid i have to take full costs due my root and custom rom, if they can fix/see it at all.
it worked fine after all and shut down with no reason what makes me think this is a hardware problem.
does anyone else have any suggestions before i bring it to the service center?
thanks
Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6
HUAWEIAscendP6 said:
Let it charge for 24 hours,see if you can turn it on after that.
HUAWEIAscendP6
Click to expand...
Click to collapse
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.
larsbehrens1 said:
It has been on the charger for more than 24 hours, nothing has changed, still doesnt seem to charge.
Click to expand...
Click to collapse
No led?
HUAWEIAscendP6 said:
No led?
Click to expand...
Click to collapse
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.
larsbehrens1 said:
Nope, the only led that ive been able to see is the red one for 1/4th of a second in SOME cases when i try to boot it.
Click to expand...
Click to collapse
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.
HUAWEIAscendP6 said:
But thats's ok, this is a common android problem, but some phone must be charged for al least two days, and after that try to flash another ROM. Even if the led is not always on, let it for a long time to charge, trust me, the power will be inside your battery, not full but enough to resist/handle a new ROM flashing.
Click to expand...
Click to collapse
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware
larsbehrens1 said:
Yea i know that... But it doesnt show the led when i charge it (so the led has nothing to do with the charging state of the phone), only in some cases when i try to boot into recovery. And the battery cant actually be totally empty, it was 40% when it totally crashed so i dont think thats the problem. And if so, it should at least get to the point where it is trying to flash the original firmware
Click to expand...
Click to collapse
What tool are you using for flashing? Or you try to install it from sdcard?
HUAWEIAscendP6 said:
What tool are you using for flashing? Or you try to install it from sdcard?
Click to expand...
Click to collapse
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb
larsbehrens1 said:
Im trying to flash it thru the sdcard with the update.app in sdcart/dload/update.app but to do that, you have to put in a certain mode (by holding vol+ and vol- and the power button) . But once again, i cant put the phone in A state, doesnt matter which state. It just wont get in a stable mode. Thats why i cant use fastboot/adb
Click to expand...
Click to collapse
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.
HUAWEIAscendP6 said:
That button combination if for internal storage dload folder. Put your ROM on the sdcard. Enter CWM or TWRP and flash it throu there.
Click to expand...
Click to collapse
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW
Larsbehrens said:
I wish i could acces CWM cus then i wouldn't have this problem at all.... but i already said that i can't get my phone in a stable state, or any state. so i can NOT acces CMW
Click to expand...
Click to collapse
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6
HUAWEIAscendP6 said:
Let it charge to your wall outlet,not through usb cable.
HUAWEIAscendP6
Click to expand...
Click to collapse
Already doong that for the past 48 hours
Bringing it back
So guys,
Im going to the service center in 8 hours since my phone is completely DEAD. It doest charge and it does not even react to the power button anymore... (Probably cus the battery is completely drained), it doesnt react to anything else either (usb, power net, anything) and will nog be able to fix by connecting it thru a computer. Aka its hopeless...
Thanks for the support
Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Larsbehrens said:
Ive been to the service center, got a new phone directly, so everything is solved. For the information, my problem was a (like i expected) hardware problem, and there was NO way to fix without replacing hardware.
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Good news.
Hello to everyone, i hope there is someone could help me
Like i said in the title i deleted my Android OS (yes, i'm an idiot) and now i'm stuck in the LG's logo with the label of unlocked bootloader. I tried to enter in download mode or in TWRP but nothing works...
Do you any advice for me? Thanks and i'm sorry for my bad english
How did you manage to delete your OS? lol.
NocturnalDroid said:
How did you manage to delete your OS? lol.
Click to expand...
Click to collapse
i wiped all internal data for install a new rom via TWRP but this new rom doesn't exist XD
Okay, so you wiped all data. Then what, you tried to flash new rom via ADB?
just reboot to twrp by holding vol up and power. when you see the lg logo release power and press and hold it again. Then a screen asking to factory reset comes up. say yes and yes, then you are in twrp. Connect phone to computer and enable mtp mode so your computer see the phone. You can then transfer another rom to phone to flash.
MrSteelX said:
just reboot to twrp by holding vol up and power. when you see the lg logo release power and press and hold it again. Then a screen asking to factory reset comes up. say yes and yes, then you are in twrp. Connect phone to computer and enable mtp mode so your computer see the phone. You can then transfer another rom to phone to flash.
Click to expand...
Click to collapse
I think he mentioned TWRP/Download mode not working. He's deleted everything basically, lol.
NocturnalDroid said:
I think he mentioned TWRP/Download mode not working. He's deleted everything basically, lol.
Click to expand...
Click to collapse
if thats true, this is a hard brick and lg can fix it.
FUBAR.
IlBudda said:
i wiped all internal data for install a new rom via TWRP but this new rom doesn't exist XD
Click to expand...
Click to collapse
Wiping even with internal data checked doesn't wipe twrp...you will have to use button combo to boot as another user suggested...hold vol down+power and when screen comes on release only power then quickly repress power...do not release volume...many people are giving instructions from g2/3 which are slightly different than g4...i have accidentally done this myself...trust me twrp won't overwrite itself it's still there
MrSteelX said:
if thats true, this is a hard brick and lg can fix it.
Click to expand...
Click to collapse
How? Because i unlocked the bootloader and now technically i don't have the warranty
jamesd1085 said:
Wiping even with internal data checked doesn't wipe twrp...you will have to use button combo to boot as another user suggested...hold vol down+power and when screen comes on release only power then quickly repress power...do not release volume...many people are giving instructions from g2/3 which are slightly different than g4...i have accidentally done this myself...trust me twrp won't overwrite itself it's still there
Click to expand...
Click to collapse
I tried now but doesn't work...
IlBudda said:
How? Because i unlocked the bootloader and now technically i don't have the warranty
I tried now but doesn't work...
Click to expand...
Click to collapse
With phone off. Hold bottom vom down and plug usb connected from pc to phone. That will force download mode. If so, go here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
MrSteelX said:
With phone off. Hold bottom vom down and plug usb connected from pc to phone. That will force download mode. If so, go here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Click to expand...
Click to collapse
I love you, it works! Thank you very much
IlBudda said:
How? Because i unlocked the bootloader and now technically i don't have the warranty
I tried now but doesn't work...
Click to expand...
Click to collapse
Then you did more than you stated you did because i have erased all in twrp including internal storage and had only to do the button combo to get twrp going and send rom file from pc...retrace your steps and make sure you give as much info as possible and maybe someone can help...but none of the things you mentioned would have touched custom recovery...nevermind it seems you fixed it...enjoy
haha this i have done 3 days after buyed my G4 xD
i was so happy that a KDZ exist... Flashed and well done xD