Develop Bugs

[GUIDE] [Huawei Ascend G300] Unlock bootloader and gain root access.

Welcome all Huawei Acend G300 users, this is a full guide prepared by me which will help you unlock your bootloader and not only that but it will help you gain root access for system modifications and root required applications.
Click to expand...
Click to collapse
Keep in mind, this method is not confirmed working if you're running android 2.3.x [ Gingerbread ]. So do not use this if you're running it. Also dual sim ones aren't supported from what I see it tempers with the phone, I haven't tested it but many have reported it doesn't work on dual sims.
Lets get started shall we? Firstly I have gathered up some useful resources that will help you get started. Make sure you read this guide first, from top to bottom. Then continue. As you must have a clear understanding on what you are going to attempt. If you have any queries don't hesitate to ask on the thread itself.
Click to expand...
Click to collapse
I have performed these exact steps and have successfully unlocked my bootloader and rooted the phone. So if you're worried. Don't be. After attempting this I haven't noticed any issues either.
Okay, first of all you will need to download Unlockbootloader ---> View attachment unlockbootloader.zip
Once you have downloaded the said .zip extract the .exe file inside the .zip to your desktop.
Continue by turning on USB debugging on your G300. if its already switched on then skip the part below..
Go into Settings>Developer Options and tick the USB Debugging option.
Once its switched on, plug your phone to the computer using a USB cable.
So far you've downloaded Unlockbootloader, have switched USB debugging on, and your phone is connected to your PC.
Now run the .exe file you have just extracted. Click "Root" and let it do everything, it will prompt up with a few warnings saying don't use your keyboard because CMD is running.
Once the setup finishes, your phone should be rooted.
Head into the app drawer, and if you see "SuperUser" you're now officially rooted.
Reboot your phone to finalize the rooting and exploits.
Ok, now for the bootloader.
Once your phone is on, and connected again to the PC with debugging mode on, run the .exe file again and this time click "Unlock BootLoader".
Wait for it to do its job, once done reboot again and you now have a Stock Rooted and Bootloader unlocked ICS phone.
Click to expand...
Click to collapse
If this Guide helped, don't hesitate to hit the thanks button.

I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon

jon sawyer said:
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
Click to expand...
Click to collapse
Settings>applications>development>usb debug
Sent from my HUAWEI U8815 using Tapatalk 2

Can't Root
When I try and root my device is says "ROOT failure, please check the driver" what should I do?

EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
Hi, assuming you have installed the g300 adb drivers, once the device is hanging on the boot logo and you connect the usb cable. You need to wait for windows to fully the load the adb driver before you use the unlockbootloader.exe program.

EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
What you have to do is,turn on debug, then power off device fully by pulling off battery then putting it back in, now you must power on by golding the volume down button and power button at the same time, this should get it to be stuck on the huawei logo screen, now plug in your USB cable and wait for you PC to detect the phone and it should automatically install the devices driver's, one its done the now open the folder and run .BAT files, If you are experiencing problems here's a link for another guide : View

Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?

biscuitpt said:
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
Click to expand...
Click to collapse
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2

krishneelg3 said:
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo

biscuitpt said:
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
Click to expand...
Click to collapse
This is for ics mate.not gb.
Go to modaco
Ways to fix. Flash ota update b927 ...
Sent from my HUAWEI U8815 using Tapatalk 2

bootloop :/
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks

evotaz said:
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
Click to expand...
Click to collapse
Turn ur phone completely off. By pulling out battery then apply the battery again.
Now hold volume down and power button and it should be in boot loader mode. If ur logo is stuck well this is in boot loader if not and it continues well.. idk
Sent from my Ascend G300 using Tapatalk 2

Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.

petar17 said:
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
Click to expand...
Click to collapse
What was ur baseband and were u running gingerbread?
If u r on official ics then this guide is for u, if not notify me.
PS : If you are running Gb I refer you to look into this guide, as long as your phone can boot into bootloader your fine, and I'm sure it will boot into Bloader mode : http://www.modaco.com/topic/353386-how-to-root-your-huawei-ascend-g300-for-windows-mac-and-linux/

Thanks krishneelg3,
my baseband is 109808, and I'm running GB.
The problem is that I don't know if I'm in a Bootloader mode when I see a pink screen?
When I press VOLUME DOWN + POWER it starts same as when I press POWER, first logoo (in my case picture of my operator) it lasts for about few seconds, then phone reboots and start doing it cyclically.
The other thing is that, when I press VOLUME DOWN + VOLUME UP + POWER, it then turns into a pink screen.
In that state (pink screen), when I plug in my phone to my PC, PC recognize my phone without reading sd card or internall memory.
So what should I do?
Thanks man, really appreciate it!

Guys,
I solved the problem.
I've just followed the instructions in step 5. on the site http://huaweig300.com and put a new update.app (1 KB) and copy it to the dload. After that I've used main dload (ICS folder, aprox abot 600 MB) and everything updated and installed successfully.
Thanks.
p.s. if anyone has or had the same problem, do not hesitate to ask.

hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks

stringman said:
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
Click to expand...
Click to collapse
OK get the official pics update b927* must be that build.
After its done downloading, extract its contents to your memorycard of the phone.
Make sure the update.app is in the root of SD card .
Then power off phone, remove battery re apply battery and hold the three buttons "volume up, volume down and the power button" until a screen pops up it will then install the stock ics once its done it'll reboot twice.
If only one it doesnt matter.
Setup the phone. Now to install b934 or newer versions use cwm for dazzozos repacks or the update force method. But I advice u to look for help on modaco. Thanks.
Modaco name : krishang3

krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks

stringman said:
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
Click to expand...
Click to collapse
Your on gingerbread so your baseband Is 109808 and if u flash any b934+ stock using the combinations say goodbye to your phone. I did that to my brothers and it bricked.
So to get to ice you must install b927 version of ics then your baseband will change to the new one *2030* now you can flash any b934+ stocks because you now have the new baseband.
Go to modaco and enter the G300 forums and look at the first dew pages all the info and guides you need. Procedure is simple.

[Q] Ascend P6 died after a call

Hi,
after ending a call, my phone has powered off and refuses to power on again. The battery was 80% full. I've plugged it to charger. but even the orange indication LED doesn't work.
For the last month, since I've received it, it worked flawlessly.
I've Huawei Ascend P6 with EmotionUI 1.6 on Android 4.2.2.
Kernel version: 3.0.8-00795-g35bf84a
ROM: P6-U06V100R001C00B125
How can I ressurect my phone?
Thanks in advance!

rainbringer said:
Hi,
after ending a call, my phone has powered off and refuses to power on again. The battery was 80% full. I've plugged it to charger. but even the orange indication LED doesn't work.
For the last month, since I've received it, it worked flawlessly.
I've Huawei Ascend P6 with EmotionUI 1.6 on Android 4.2.2.
Kernel version: 3.0.8-00795-g35bf84a
ROM: P6-U06V100R001C00B125
How can I ressurect my phone?
Thanks in advance!
Click to expand...
Click to collapse
Take it to the service.

BeyondTheHorizon said:
Take it to the service.
Click to expand...
Click to collapse
Any ideas I can try at home?

rainbringer said:
Any ideas I can try at home?
Click to expand...
Click to collapse
The phone responds if you press volume up + volume down + power button all at once for 5 seconds? Doing that must put your phone into recovery. Can you do that ?
If you can. Remove your sdcard. Create a dload folder and put the B125 update.app file in there. Insert the sdcard and do the volume up + down + power button method. You have stock recovery and it's not rooted, right?
If all goes well, the phone will be upgrading again the B125 ROM and you will have a working device again.
Press the volume up + volume down + power button all at once until you see the HUAWEI logo, when you see that release all buttons.

I've rooted it at the very beginning.
Unfortunately, it doesn't respond to the simultaneous key pressing.
I guess, I need to take it to service. I hope they'll be able to do something. It's only a month old ((

rainbringer said:
I've rooted it at the very beginning.
Unfortunately, it doesn't respond to the simultaneous key pressing.
I guess, I need to take it to service. I hope they'll be able to do something. It's only a month old ((
Click to expand...
Click to collapse
If it's rooted you can flash through adb a stock recovery and follow my sdcard / dload / update.app method and you'll save the phone.
Search the XDA forum for instructions on how to flash through adb.

rainbringer said:
I've rooted it at the very beginning.
Unfortunately, it doesn't respond to the simultaneous key pressing.
I guess, I need to take it to service. I hope they'll be able to do something. It's only a month old ((
Click to expand...
Click to collapse
Tell them you want a P7 in return.

BeyondTheHorizon said:
If it's rooted you can flash through adb a stock recovery and follow my sdcard / dload / update.app method and you'll save the phone.
Search the XDA forum for instructions on how to flash through adb.
Click to expand...
Click to collapse
Thanks! I'll try it.
warea said:
Tell them you want a P7 in return.
Click to expand...
Click to collapse
A good idea I'll try that too

rainbringer said:
Thanks! I'll try it.
A good idea I'll try that too
Click to expand...
Click to collapse
Try the first method first, it's free.

Best method to unlock zenfone 5 bootloader without any freeze/random reboot!

I'm using RR 5.6.9 by @tank0412 for last one week.
http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
So far I didn't face any freezing or random reboot issues. What I did is as below:
1. Flash/downgrade to UL-ASUS_T00F-WW-2.21.40.30-user firmware.
If you know how to flash stock firmware then skip step 2-12 and just flash it by yourself. These steps are for new users.
2. TURN OFF the device. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. Check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. Download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
If you have different SKU, you need to find the right firmware(version-2.21.40.30) here: https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/
5. Extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. Run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Then go to recovery by selecting from the menu, you will an android logo with "!" sign. Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.
8. In the recovery, select wipe data/factory reset
9. Select wipe cache partition
10. Select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. After successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Download this official tool for Unlock Bootloader: http://dlcdnet.asus.com/pub/ASUS/Ze...rel.zip?_ga=1.117083014.1481752799.1464212721
A501cg users should get the tool here: https://www.asus.com/Phone/ZenFone_5_A501CG/HelpDesk_Download/
14. Extract the downloaded file and copy the .apk file into you SDcard. Install that .apk(if it says untrusted app, then go to settings>security>enable Unknown sources).
15. Run the installed app and press unlock. wait and let it reboot. After this, your Asus splash screen will become white & bright.
16. Now do a clean flash for any custom rom.
You guys can try it. :highfive:
Note: Few users are having "No Camera" issue for unlocked bootloader. This method will not fix that. Sorry about it, I'm a victim as well.

a8962383 said:
I'm using RR 5.6.9 by @tank0412 for last one week.
http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
So far I didn't face any freezing or random reboot issues. What I did is as below:
1. Flash/downgrade to UL-ASUS_T00F-WW-2.21.40.30-user firmware.
If you know how to flash stock firmware then skip step 2-12 and just do it.
2. TURN OFF the device. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. Check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. Download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
If you have different SKU, you need to find the right firmware(version-2.21.40.30) here: https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/
5. Extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. Run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Then go to recovery by selecting from the menu, you will an android logo with "!" sign. Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.
8. In the recovery, select wipe data/factory reset
9. Select wipe cache partition
10. Select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. After successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Download this official tool for Unlock Bootloader: http://dlcdnet.asus.com/pub/ASUS/Ze...rel.zip?_ga=1.117083014.1481752799.1464212721
14. Extract the downloaded file and copy the .apk file into you SDcard. Install that .apk(if it says untrusted app, then go to settings>security>enable Unknown sources).
15. Run the installed app and press unlock. wait and let it reboot. After this, your Asus splash screen will become white & bright.
16. Now do a clean flash for any custom rom.
You guys can try it. :highfive:
Note: Few users are having "No Camera" issue for unlocked bootloader. This method will not fix that. Sorry about it, I'm a victim as well.
Click to expand...
Click to collapse
When i run unlock application its saying my device its not supported. My device is zenfone 5 a501cg 1.2 ghZ, 2gb ram and 8 gb rom.
Sent from my ASUS_T00J using XDA-Developers mobile app

Well weather this method would work is debatable since I have used various methods posted on ozanks thread but non have worked I even used a debricking method and it still didn't fix freeze this method would only qualify and a downgrade from roms after this

pintuvirani said:
When i run unlock application its saying my device its not supported. My device is zenfone 5 a501cg 1.2 ghZ, 2gb ram and 8 gb rom.
Sent from my ASUS_T00J using XDA-Developers mobile app
Click to expand...
Click to collapse
First of all, please don't quote the whole OP while you are replying.
Yes, it won't work for your device as you have a501cg. You need to get the official unlock tool from this site: https://www.asus.com/Phone/ZenFone_5_A501CG/HelpDesk_Download/
Before that you have to flash or downgrade to *.30.zip firmware.
Sent from my ASUS_T00F using XDA-Developers mobile app

jiyaad1 said:
Well weather this method would work is debatable since I have used various methods posted on ozanks thread but non have worked I even used a debricking method and it still didn't fix freeze this method would only qualify and a downgrade from roms after this
Click to expand...
Click to collapse
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Click to expand...
Click to collapse
Actually a501 has the SAME unlocker as a500cg. There's only one app that unlocks a wide variety of Asus devices. (Zen6's different afaik).
And we tried to install 2.21.40.30 for base as well and it changed nothing.
And unlocker application doesn't change the working mechanism of phone (we decompiled it).
So, are you sure that you tried to use heavy applications like Youtube or some games?
If you get any user that reports freezes gone; i will try it again with your method.
Thanks for your contribution. Good luck with your method. :laugh:
Btw assuming you have a500cg, that phone can be fixed imo.

ozank said:
Actually a501 has the SAME unlocker as a500cg. There's only one app that unlocks a wide variety of Asus devices. (Zen6's different afaik).
And we tried to install 2.21.40.30 for base as well and it changed nothing.
And unlocker application doesn't change the working mechanism of phone (we decompiled it).
So, are you sure that you tried to use heavy applications like Youtube or some games?
If you get any user that reports freezes gone; i will try it again with your method.
Thanks for your contribution. Good luck with your method.[emoji23]Btw assuming you have a500cg, that phone can be fixed imo.
Click to expand...
Click to collapse
Bro, I'm a heavy user. Many of us had faced forced close for 8 ball pool game. I had it too but after this method no forced close happened again. I'm not sure whether a500cg and a501cg have same app for unlocking. It's a bit confusing to me as they have different sites to download their firmwares and tools. But I'm sure, what ever the phone is a500cg or a501cg, the tool will work if the user has *.30.zip firmware installed.
Sent from my ASUS_T00F using XDA-Developers mobile app

a8962383 said:
Bro, I'm a heavy user. Many of us had faced forced close for 8 ball pool game. I had it too but after this method no forced close happened again. I'm not sure whether a500cg and a501cg have same app for unlocking. It's a bit confusing to me as they have different sites to download their firmwares and tools. But I'm sure, what ever the phone is a500cg or a501cg, the tool will work if the user has *.30.zip firmware installed.
Click to expand...
Click to collapse
Yes because the tool seeks for if.bin on firmware folder and it copies to the sysfs. (You're doing same thing on fastboot when flash ifwi if.bin)
So that's why I don't believe the unlocker tool fixes something.
Anyway, thanks; I will wait for another users that solved the issues with your method and then take a look with my phone.

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
I've tried it. Within the first few minutes, it froze again.
Anyways, thanks for trying.

cnswico said:
I've tried it. Within the first few minutes, it froze again.
Anyways, thanks for trying.
Click to expand...
Click to collapse
Did you downgrade to UL-ASUS_T00F-WW-2.21.40.30-user.zip?

a8962383 said:
Did you downgrade to UL-ASUS_T00F-WW-2.21.40.30-user.zip?
Click to expand...
Click to collapse
Exactly as stated in the instructions. I'll try it a second time.

cnswico said:
Exactly as stated in the instructions. I'll try it a second time.
Click to expand...
Click to collapse
This unlock app its work on first kikat rom 2.19 build. But thing is my device not detecting sim on jelly bean and first kitkat build. I tried many time but not detecting sim. Only start detecting sim from 2.19.40.9 to lollipop rom only.
Sent from my ASUS_T00J using XDA-Developers mobile app

It froze again about 3 hours after I had unlocked with asus tool & flashed RR 5.6.9. And I hate that white & bright splash screen anyways, thanks so much for doing research. I believe we will find out a way to solve this problem some day.

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
I used a method suggested by @dgadelha and it still didn't help and right now I lost my phone to a freak accident so I'm with out a unit for testing ?

tranxuanthang said:
It froze again about 3 hours after I had unlocked with asus tool & flashed RR 5.6.9. And I hate that white & bright splash screen anyways, thanks so much for doing research. I believe we will find out a way to solve this problem some day.
Click to expand...
Click to collapse
Extract splash.bin from rom:
fastboot flash splash splash.bin
or
fastboot flash splashscreen splash.bin
I don't remember which was doing this, but try these

a8962383 said:
Many of us had faced forced close for 8 ball pool game.
Click to expand...
Click to collapse
this is not due to bootloader
I have no problems with bootloader
8 ball force closed on all custom MM rom's
I have no problems except "freeze on 8 ball"
all custom MM rom's used dgadelha's device tree
I think there is a mistake in this

milano88 said:
this is not due to bootloader
I have no problems with bootloader
8 ball force closed on all custom MM rom's
I have no problems except "freeze on 8 ball"
all custom MM rom's used dgadelha's device tree
I think there is a mistake in this
Click to expand...
Click to collapse
You are right. Most of the cross platform developed apps are crashing. It seems like something is wrong with the JavaScript's render engine. I don't play with ROMs. Hope ppl will come forward to have a fix. But to my utter surprise it's been 10days, I still don't have any freezing.
Sent from my ASUS_T00F using XDA-Developers mobile app

Before, following your method with 2.21.40.30-user.zip was not success, but downgrade to 2.22.40.540-user.zip is ok. Unlocked with black logo, white ground but can not flash TWRP, how can install cooked ROM?

My phone is Asus Zenfone 5 T00j A501CG WW. It has 1.6 GHz CPU, 16 gb internal, 2 gb ram. Can this method work if I get the stock firmware you mentioned?

Hi I am new to Android, I follow the steps as mentioned. But not able to after step 7(Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.), I am not go to recovery mode. The phone goes power off mode and is not starting again. Any help is appreciated.
Regards,
Debasish

Question how to update the rom without access to system updates?

hello there!
how can i update to the GLOBAL EU ROM if i cant access the settings->system updates? please help me, i am new to android stuff and i am desperate here, i will attach a screen recording that shows my problem...

Move the stock rom to the main folder on the phone. You need to download the rom firstly from this site but do not follow the instructions.
https://help.redmagic.gg/hc/en-us/articles/360033542691-Global-ROMs-and-UpdatesBoot to recovery mode:
Recovery Mode NUBIA Red Magic 3, how to - HardReset.info
The Recovery mode it is the hidden feature which will enable a lot of useful operation.
www.hardreset.info
Choose update package by using volume and power buttons(or touch)

LR7875 said:
Move the stock rom to the main folder on the phone. You need to download the rom firstly from this site but do not follow the instructions.
https://help.redmagic.gg/hc/en-us/articles/360033542691-Global-ROMs-and-UpdatesBoot to recovery mode:
Recovery Mode NUBIA Red Magic 3, how to - HardReset.info
The Recovery mode it is the hidden feature which will enable a lot of useful operation.
www.hardreset.info
Choose update package by using volume and power buttons(or touch)
Click to expand...
Click to collapse
thank you very much! i will check that out! but like i said, i am new to android stuff, can i maybe ask you more questions if i run into a problem? cheers

Yes definitely

LR7875 said:
Yes definitely
Click to expand...
Click to collapse
ahh thank you so much!! i am downloading the rom right now....so once i am in recovery mode i just choose "apply update from ADB" and select the zip file in my root directory and thats it?
edit: do i need to do a factory reset first to wipe the chinese stuff thats on the phone? or will the rom update do a reset automatically? oh sorry i didnt expand your message, ok so i go into recovery mode and select "update package". got it! thanks!

but now i have a new problem. when i shut off the phone and then push volume up+power button i enter into a menu that looks like this. what am i doing wrong?

ok so when i push volume up+power i come into the first menu and if i push volume down+power i come into the second menu. the problem i have is that when i select "boot to recovery mode" it just brings me back into the first menu here are the two screenshots. where do i need to go exactly to update?

darclon888 said:
ok so when i push volume up+power i come into the first menu and if i push volume down+power i come into the second menu. the problem i have is that when i select "boot to recovery mode" it just brings me back into the first menu here are the two screenshots. where do i need to go exactly to update?
Click to expand...
Click to collapse
What if you boot to edload

LR7875 said:
What if you boot to edload
Click to expand...
Click to collapse
i booted to edload and the phone just powered off and now it dosent start anymore

LR7875 said:
What if you boot to edload
Click to expand...
Click to collapse
oh god it didnt start for 3 minutes and now it just rebooted normally....this is crazy

darclon888 said:
oh god it didnt start for 3 minutes and now it just rebooted normally....this is crazy
Click to expand...
Click to collapse
So your system is still functional?

LR7875 said:
So your system is still functional?
Click to expand...
Click to collapse
yes it is still functional. but i didnt find a way to update my firmware. i did a data wipe but it didnt help. my system update option is still not responding (like you can see in my video at the beginning of this thread) and nowhere in the recovery mode is an opntion to do manual updates. i think i am stuck with this weird multi firmware do you know if there is a way to update my firmware with the help of my PC? im really grateful for any solution cause i am totally lost at this point. thanks for your time!

darclon888 said:
yes it is still functional. but i didnt find a way to update my firmware. i did a data wipe but it didnt help. my system update option is still not responding (like you can see in my video at the beginning of this thread) and nowhere in the recovery mode is an opntion to do manual updates. i think i am stuck with this weird multi firmware do you know if there is a way to update my firmware with the help of my PC? im really grateful for any solution cause i am totally lost at this point. thanks for your time!
Click to expand...
Click to collapse
In recovery select 'apply update from sdcard'.

LR7875 said:
In recovery select 'apply update from sdcard'.
Click to expand...
Click to collapse
when i select "recovery mode" it brings me to this screen:

Weird, where does this phone come from?

LR7875 said:
Weird, where does this phone come from?
Click to expand...
Click to collapse
from tradingshenzhen.com i ordered it from there and its the 12gb ram version

So do you learn about adb?

LR7875 said:
So do you learn about adb?
Click to expand...
Click to collapse
i have heard about it. i know it has something to do with manipulating the phone with the help of the computer but i have no idea how to use it and what to do to apply my update

LR7875 said:
So do you learn about adb?
Click to expand...
Click to collapse
ok i think i found out why i have no update options in my recovery menu! look in my screenshot there it says that DEVICE STATE - locked. i think it means that the bootloader is locked and therefore i dont have the ability to flash the rom. unfortunately i dont know how to unlock the bootloader. all i know is that i first need to activate OEM unlocking in developer options (which i have done). but from here i dont know how to unlock the phone. could you please help me unlock my phone? thank you for the time!

darclon888 said:
ok i think i found out why i have no update options in my recovery menu! look in my screenshot there it says that DEVICE STATE - locked. i think it means that the bootloader is locked and therefore i dont have the ability to flash the rom. unfortunately i dont know how to unlock the bootloader. all i know is that i first need to activate OEM unlocking in developer options (which i have done). but from here i dont know how to unlock the phone. could you please help me unlock my phone? thank you for the time!
Click to expand...
Click to collapse
Do you know about fastboot?
Probably search for tutorials on google or read these links
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
(choose yes, yes and Yes)
How to install ADB on Windows, macOS, and Linux
A step-by-step guide to get you started with the Android Debug Bridge tool.
www.xda-developers.com
[ADB | FASTBOOT | LINUX COMMANDS] BootLoader, Kernel, Recovery, ROM, Root, Backup
NOTE: I'm not a developer or something even near to that. All information provided here is copied from different sources and according to the best of my knowledge. I have tested this on different devices using Windows 8.1 & 10. I'll not be...
forum.xda-developers.com

Question urgent help plzmy Pixel 6 Pro doesn't work

I received this Pixel 6 Pro this morning. I want to get root privileges， after a regular ota upgrade, I did the following steps: Unlock the bootloader (successfully) extract the system boot file, give it to magisk (25.2) for repair, and then flash the repaired file, But I can't flash in, like in the photo, fastboot boot/flash boot. I have tried many times but failed without exception. Up to now, my Pixel 6 Pro is stuck on the bootloader interface, but I cannot press the power button to start the phone(power button is OK）, and I can still use the volume buttons to select the boot option. But now the phone can't connect to the computer...the computer doesn't respond...what should I do (make sure all the file is correct)
plz help me...
dang Google Tensor M2

output image here,help me plz.....
all words are translate form Google
dang tensor

Why don't you use this tool(https://github.com/badabing2005/PixelFlasher/releases) to do that ? It would be more easier.

Kris Chen said:
（https://github.com/badabing2005/PixelFlasher/releases）要做到这一点？这会更容易。
Click to expand...
Click to collapse
I forgot about this tool...can I use it to save my phone?

Juuuuune said:
I forgot about this tool...can I use it to save my phone?
Click to expand...
Click to collapse
Well, this tool is dedicated to pixel phone for flashing google factory rom and maintain magisk modules. Of course, it can make you patch boot.img by magisk easily.
If you spend time to read its instruction, you can click the keep data before flashing pixel new udpated rom then you can keep your photo as well as your app ...

Juuuuune said:
I forgot about this tool...can I use it to save my phone?
Click to expand...
Click to collapse
If your phone can boot into bootloader, it can definitely save your phone.

Kris Chen said:
如果你的手机可以开机进入bootloader，那绝对可以拯救你的手机。
Click to expand...
Click to collapse
Perfect, I went to Google support for help, it took about 40 minutes, they corrected my English while guiding me to reset the bootloader, very good, my phone has resurrected, but I will still try to root it

Kris Chen said:
If your phone can boot into bootloader, it can definitely save your phone.
Click to expand...
Click to collapse
Hey bro, I don't know which one is the required pixel flasher, do I need to download all of them?

Juuuuune said:
Hey bro, I don't know which one is the required pixel flasher, do I need to download all of them?
Click to expand...
Click to collapse
I think it depends on which environment you have in your computer.
For instance, windows then you just need to download .exe file ...etc.

Entering its main page and there is instruction how to use it(https://github.com/badabing2005/PixelFlasher).

Juuuuune said:
Perfect, I went to Google support for help, it took about 40 minutes, they corrected my English while guiding me to reset the bootloader, very good, my phone has resurrected, but I will still try to root it
Click to expand...
Click to collapse
You can just boot to fastboot and boot the image
Code:
fastboot boot "magiskpatchedimage.img"
Then when it boots, direct install in the magisk app.

fil3s said:
You can just boot to fastboot and boot the image
Code:
fastboot boot "magiskpatchedimage.img"
Then when it boots, direct install in the magisk app.
Click to expand...
Click to collapse
actually the phone couldn't connect to PC,and power button didn't work at that time ,the volume button is OK.I think it must tensor M2 or bootloader do,but the assistance group told me that I can use three buttons to Reset the bootloader，finally I make it,my pixel 6 pro is root and normally use now.translate form google