Develop Bugs

[Q] Installation aborted (BAD)

Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty

tuktukscotty said:
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
Click to expand...
Click to collapse
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing

shhbz said:
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
Click to expand...
Click to collapse
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??

tuktukscotty said:
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
Click to expand...
Click to collapse
http://www.winmd5.com/ download this locate the downloaded rom file and it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom and verify to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery

shhbz said:
http://www.winmd5.com/ download this locate the downloaded rom file and verify it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
Click to expand...
Click to collapse
I'm using philz touch 4.6.4

tuktukscotty said:
I'm using philz touch 4.6.4
Click to expand...
Click to collapse
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing

shhbz said:
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
Click to expand...
Click to collapse
I have a UK bought note 2

tuktukscotty said:
I have a UK bought note 2
Click to expand...
Click to collapse
yes that's fine if ur box says n7100 and below battery check

shhbz said:
yes that's fine if ur box says n7100 and below battery check
Click to expand...
Click to collapse
Yes defo says GT-N7100

tuktukscotty said:
Yes defo says GT-N7100
Click to expand...
Click to collapse
you are good to proceed with the link file

shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I have installed the later philz recovery. Just going to try and flash again

tuktukscotty said:
I have installed the later philz recovery. Just going to try and flash again
Click to expand...
Click to collapse
Nope!.
Still unable to install. It says:
-- Installing: /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
(bad)
Installation aborted
press any key to continue.
What am I doing wrong????? This is really so frustrating. Have I done something when installing the leaked version of 4.3 which is now stopping anything working??. Anybody got any ideas???.
Someone out there must know what I'm doing wrong...........please help.

shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I tried and tried and tried but couldn't get it to install. I then decied to reflash back to 4.1.2 stock via odin. Then tried to install Dr's again but still wouldn't work. I then flashed the leaked 4.3 via odin and repeated the Dr's install and it worked!!!!!!.
Thanks for the advice.
Scotty.

CWM Not Work

hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting

dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk

teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before

The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.

qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please

I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.

qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.

what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?

I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?

manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/

i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm

manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry

The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine

Can someone give me the link to go from 4.3.1 to 4.4??

I'm running Dirty Unicorn 4.3.1 and MK4 and want to root to 4.4 kit kat and load some new roms.
I have tried just wiping and flashing, but I get no data unless i'm on wifi.
Is there a step by step to get the update?? I also read about some knox crap also. Don't know what that is.
Please advise.......
Thanks in advance
Dave

wascapsfan said:
I'm running Dirty Unicorn 4.3.1 and MK4 and want to root to 4.4 kit kat and load some new roms.
I have tried just wiping and flashing, but I get no data unless i'm on wifi.
Is there a step by step to get the update?? I also read about some knox crap also. Don't know what that is.
Please advise.......
Thanks in advance
Dave
Click to expand...
Click to collapse
Well if you read most of the 4.4 rom threads you will see you need to use cwm recovery or philz recovery. Since you are using twrp you wont get data to work without going through a few hoops.

jlmancuso said:
Well if you read most of the 4.4 rom threads you will see you need to use cwm recovery or philz recovery. Since you are using twrp you wont get data to work without going through a few hoops.
Click to expand...
Click to collapse
I did download rom manager and Philz. I just wasn't sure how to get them to override TWRP. Do I just flash Philz??
Thanks so much for chiming in. I've been rooted for several years, but this update flew right by me.
Keep talking......

Yeah just flash it through ROM manager then reboot into recovery. If it is not philz recovery (although it should be) then you can just flash it in recovery.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Yeah just flash it through ROM manager then reboot into recovery. If it is not philz recovery (although it should be) then you can just flash it in recovery.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I downloaded rom manager, but it doesn't seem to override TWRP. I also tried to flash Philz (which I preferred), but I could only try to flash it with TWRP, and of course, it failed.
Do I need to freeze TWRP in Titanium backup ???

Please re-download Philz and verify md5 then flash in twrp. After flashing in twrp reboot the recovery within twrp and boom! you have Philz!

flynhawn2002 said:
Please re-download Philz and verify md5 then flash in twrp. After flashing in twrp reboot the recovery within twrp and boom! you have Philz!
Click to expand...
Click to collapse
Each time I download Philz, I try to flash it, (through TWRP),but it fails.

wascapsfan said:
Each time I download Philz, I try to flash it, (through TWRP),but it fails.
Click to expand...
Click to collapse
Like you, I could not get TWRP to leave my device (no matter what I tried). Only thing that finally worked was this flasher utility to get CWM:
https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Granted I didn't try to Odin PhilZ or CWM but that was about the only thing left I hadn't tried.

I had twrp for a recovery. When I installed DU 4.4.2, I downloaded cwm 6.0.4.3 because I guess twrp and 4.4 roms don't play nice. I actually downloaded the cwm recovery, saved it on my external sd, and booted into twrp recovery, flashed the recovery file for cwm, and it rebooted. I boot back into recovery with cwm on board, and then downloaded whatever 4.4 roms and gapps package that was necessary. It works fine for me.

[REQ] CWM 6.0.4.7 flashable recovery

Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!

MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!

MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first

Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....

Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?

i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?

hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's

I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?

chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.

I get wrong date and time whene i make a backup. I have a E986. How can i fix this?

Cant Install CWM On Samsung Note II N7100

Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .

.Hell. said:
Hello everyone .
I have problems installing CWM on my phone , i tried everything on this thread " http://forum.xda-developers.com/showthread.php?t=2445480 " and it would never work for me
I keep getting pass on ODIN but it keep reboot back into normal Android not recovery mode
What do it do , and please keep in mind that i am too noob with all the hard words for rooting and flashing stuff , so please explain to me what should i do
Thanks in advance .
Click to expand...
Click to collapse
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.

ceomaverick said:
Kitkat overwrites recovery on every reboot. So here is the solution:
When you flash cwm via ODIN, untick the auto-reboot option. Let the odin flash the file and wait for pass message.
Now reboot directly to recovery (not to phone). You will be in cwm. From there you can reboot to your phone.
Now power off your phone and see if you have a cwm recovery.
Press thumps up if you found this suggestion helpful.
Click to expand...
Click to collapse
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat

.Hell. said:
I have did what you just told me and still nothing happened and got back into normal ROM with no custom recovery , and i am on Android 4.3 i think that is jellybean not kitkat
Click to expand...
Click to collapse
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?

ceomaverick said:
Well that is certainly weird. Are you sure you are using correct cwm file. Can you put the link of cwm file you are using?
Click to expand...
Click to collapse
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way

.Hell. said:
Well i tried 3 Philz recovery files and nothing worked and here they are :
http://d-h.st/OIX
http://d-h.st/IVq
http://forum.xda-developers.com/showpost.php?p=53488494
if you have any detailed way to do it with links you can help me by posting them and i will also try your way
Click to expand...
Click to collapse
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.

ceomaverick said:
Try this one:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.48.4-n7100.zip.md5
I hope your note is 7100 not 7105.
Click to expand...
Click to collapse
Hello , Yes my device is N7100 and i am currently on 4.3 Jellybean and i have tried your recovery file with no success still i don't know why D=

Hello , excuse me for a stupid question , but ... is your note 2 rooted ?

gb61 said:
Hello , excuse me for a stupid question , but ... is your note 2 rooted ?
Click to expand...
Click to collapse
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later

.Hell. said:
No its not i just got it so i was trying to install CWM for the first time then root it and maybe install a custom ROM later
Click to expand...
Click to collapse
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.

gb61 said:
Ok, here is the problem , you must root your phone first and after you can install a recovery like Philz or TWRP.
Click to expand...
Click to collapse
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480

.Hell. said:
I am trying to do everything here on this thread and the first thing he said is that i need to have CWM Recovery first installed before rooting or doing anything
http://forum.xda-developers.com/showthread.php?t=2445480
Click to expand...
Click to collapse
A custom recovery is necessary to install a custom rom but you can rooted your phone with Odin PC and CF-Auto-Root-t03g-t03gxx-gtn7100.zip
For example there is an explanation here :http://www.ibtimes.co.uk/galaxy-note2-n7100-root-android43-xxuemk4-jellybean-523833.
You can find others in google with search "how to root samsung galaxy note 2" .
The most important before installing is to copy your important folder to your PC.
I hope that can help you.
Excuse me for my english
---------- Post added at 05:01 PM ---------- Previous post was at 04:53 PM ----------
Other link in XDA it's seems more clear : http://forum.xda-developers.com/showthread.php?t=2143479

Okay guys i have installed Root on my phone using these two threads
http://forum.xda-developers.com/showthread.php?t=2143479
http://forum.xda-developers.com/showthread.php?t=2618261
Now what i should do actually because my problem still remain , that i cant install CWM and it keep reboot into Android not Recovery and i have tried all the methods but nothing works for me so far still

Okay guys thank you for your help , and for anyone who have my problem i used mobile odin to flash CWM