HI guys, I have received a 16 GB OTG device yesterday and I was trying to use it with my gti-9000. I had a look on the net and found this http://forum.xda-developers.com/galaxy-nexus/themes-apps/02-11-2013-stickmount-v2-30-t1400034 so I installed but I don't seem to get it to work. My phone is obviously rooted and when I start the app and plug in the usb micro stick (directly to the device with no cable) nothing happens. If I start the app and connect the device, same result but when I try the "Mount" option I get a message saying that there are no active mounts on my phone, screenshot attached
Does anybody know hoe to successfully mount the usb stick?
thanks
found this thread you could read for help http://forum.xda-developers.com/showthread.php?t=1810464
Related
Last night I was getting ready to do my first root. Was watching the syndicate video, following along.
One thing I noticed last night, is when I plugged the phone in for mass storage, to copy the files to the sd card, I kept getting these two errors.
First, when installing the drivers after plugging the phone in, I was getting this cdc failed. You can see it in this picture...
http://i11.photobucket.com/albums/a183/lardo5150/cdcabstract.jpg
I also kept getting this "scan to fix" pop up for the M drive (my phone).
When I turned on USB debugging on the phone and plugged it in, it seemed fine, except I could not access the M drive on my computer, I would get this error...
http://i11.photobucket.com/albums/a183/lardo5150/insertdisk.jpg
I did some search and decided to try what another user tried, I formatted the sd card.
I then plugged the phone back in, and did not receive the "scan to fix" errors anymore and could access the SD card with no issues, but I could not access it still while in debugging mode.
Is this by design?
Samsung drivers are installed. Got them straight from the samsung site.
No yiu should be able to play with your sd card wgile in debugging
Did you turn on mass storage after usb debugging?
Sent from my SPH-D710 using xda premium
I couldn't access the mass storage in USB debugging for a little while. It turned out my drivers got slightly corrupted. I could do everything else but that. Went into Control Panel with USB Debugging on and found the driver listed as samsung android in USB in Device Manager and hit update driver and let it get it from Windows Update.
kennyglass123 said:
I couldn't access the mass storage in USB debugging for a little while. It turned out my drivers got slightly corrupted. I could do everything else but that. Went into Control Panel with USB Debugging on and found the driver listed as samsung android in USB in Device Manager and hit update driver and let it get it from Windows Update.
Click to expand...
Click to collapse
I will try that this afternoon.
How about that cdc? Any reason why that is failing?
Same thing.
Says the latest driver is installed.
It never gives me the option of choosing charging, mass storage, tethering like it does when debugging is off.
Any ideas?
Ok, so I found this some other forums.
Seems stupid, but I had no clue.
With my phone, with debugging off, when you connect the USB, it asks you what you want to do.
With debugging turned on, it does not, you have to tell it. Below is what I found....I feel dumb..
"Okay, so if you are freaking out, or can't figure out why your new Epic isn't being recognized by your computer, calm down. Some of you are probably already searching for drivers. Ya I already went through that freak out when I got my Vibrant. Okay, to mount your phone, and have your computer recognize the internal/external memory, do this:
Connect your phone to your computer via USB. Give it a few seconds.
Next, PULL DOWN your notification bar.
Next, tap your finger on "USB CONNECTED"
You then get a message asking if you would like to mount. Tap "mount" confirming you would like to do so.
Enjoy, your computer should now recognize the internal/external memory."
lardo5150 said:
Last night I was getting ready to do my first root. Was watching the syndicate video, following along.
One thing I noticed last night, is when I plugged the phone in for mass storage, to copy the files to the sd card, I kept getting these two errors.
First, when installing the drivers after plugging the phone in, I was getting this cdc failed. You can see it in this picture...
http://i11.photobucket.com/albums/a183/lardo5150/cdcabstract.jpg
I also kept getting this "scan to fix" pop up for the M drive (my phone).
When I turned on USB debugging on the phone and plugged it in, it seemed fine, except I could not access the M drive on my computer, I would get this error...
http://i11.photobucket.com/albums/a183/lardo5150/insertdisk.jpg
I did some search and decided to try what another user tried, I formatted the sd card.
I then plugged the phone back in, and did not receive the "scan to fix" errors anymore and could access the SD card with no issues, but I could not access it still while in debugging mode.
Is this by design?
Samsung drivers are installed. Got them straight from the samsung site.
Click to expand...
Click to collapse
I had the same issue with my epic, try using a different usb cable, the one for the motorola photon resolved all the issues I had with connecting to the computer, I found out thru experience that the stock cable when using windows 7 kept giving me the same error..
Sent from my MB855 using XDA App
Also, I've had success with rebooting both the phone but especially rebooting the computer and plugging the phone back in. Try a different USB port, some folks have 2 SLOW USB ports for mouse and keyboard (mine are in the back lower left...the fast ones are on the right and in front). Most folks have better luck trying rear USB ports (although I don't know why). First, try the computer reboot though...
Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help
oscar996 said:
Help. I don't know what happened but my evo is not being read by my.computer, only reads my sd card if I plug it in separate(sd reader). It was workin perfectly this morning, then I tried usb theter my laptop and got it to work. Went back to pc and I get this error. I didn't move any settings exept download clockwork tether. Please help
Click to expand...
Click to collapse
Exactly what error do you get?
Did you CHECK "Don't ask me again" on the window that pops up when you plug it in?
Go to system settings => Connect to PC
There should be a box that you check/uncheck to make that window pop up.
When you plug it in, do you get the USB notification in the notification window? Can you click on it to change the connection type?
Is there any other useful info you can provide?
I had a EVO recently that the usb internals died techs couldn't even repair ... Or just make sure double check you have drivers installed , usb debug checked too
Sent from my PC36100 using XDA
Well thing is,it works on my laptop but not on my PC(WHICH USED to work cus I rooted there) I'm gonna try and install the drivers on pc,the ones I recently used on laptop.
It only charges the phone cus the light is on.but the notification doesn't come up nomore,
I'm on cm7 with tiamat kernel
I haven't had any problems with that ROM and kernel combo.
Have you tried different USB ports on your computer and different USB cords?
I can't think of anything else other than what's been mentioned.
If you have any more info, that might trigger a thought in someone's mind.
Make sure to post again when you figure it out!
I reinstalled the driver and it solved theproblem.
Kinda weird tho cus just because i installed the phone to laptop, pc failed to recognized it(maybe pc got jealous lol)
Hi I have an HTC ONE S and I just didn't know where to post for help, so I figured the ONE X forum may be a good place to start. I cannot seem to connect my phone via USB to any one's computer. It does not even ask me for the "storage or charge" option when I connect a usb cable. All it does is go directly into charge mode.
In bootloader I cannot even get it to show "Fastboot USB" when I connect a cable so using ADB isn't an option either. Yesterday the phone actually worked after about 2 months of not working and then when I tried reconnecting it, it stopped working again and remains USB-less as of now.
I think it important to note that the options under "Storage" in the setting menu show a "Mount SD card" but it's all grey and cannot be selected. Any help would be greatly appreciated.
I have CyanogenMod 10.1 (latest build March 12th) and my SD card is built-in.
Neurotical said:
Hi I have an HTC ONE S and I just didn't know where to post for help, so I figured the ONE X forum may be a good place to start. I cannot seem to connect my phone via USB to any one's computer. It does not even ask me for the "storage or charge" option when I connect a usb cable. All it does is go directly into charge mode.
In bootloader I cannot even get it to show "Fastboot USB" when I connect a cable so using ADB isn't an option either. Yesterday the phone actually worked after about 2 months of not working and then when I tried reconnecting it, it stopped working again and remains USB-less as of now.
I think it important to note that the options under "Storage" in the setting menu show a "Mount SD card" but it's all grey and cannot be selected. Any help would be greatly appreciated.
I have CyanogenMod 10.1 (latest build March 12th) and my SD card is built-in.
Click to expand...
Click to collapse
Wrong Forum mate. There is a forum for the HTC One S.
Sent from my HTC One X using xda app-developers app
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
ETNYBzh said:
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
Click to expand...
Click to collapse
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
HANSB57 said:
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
Click to expand...
Click to collapse
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Techguy777 said:
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Click to expand...
Click to collapse
I dont know the answer nor the solution.
What I noticed however is that I used my tablet as an monitor for an USB web cam.
The problem (charging but not being able to connect to PC) started AFTER I removed the webcam.
The app I use (USB Camera Pro) has an option "remove camera safely"
If I use that option everything works fine but if I remove the cam cable without pressing this option I cant connect to my PC anymore and have to unplug the battery.
I am having a similar issue and would be grateful for help. My Tab T815 has a clean install of the latest Android 10 Rom and Pico Gapps via TWRP 3.4. All seem to be working great apart from the USB OTG. Specifically, I am trying to connect my DJI Mini drone controller and it's not registering it plugged in. I also have Android 10 on a galaxy S5 and have no issues at all when I connect the DJI controller to the phone. I have run a diagnostic app that says OTG is compatible with the T815 so am now at a loss on what to try next. Could this be an issue with the Rom?
Firmware 6.2.7.6, not rooted
My FireTV 4K sees a keyboard but not a flash drive
Long story... so I decided to add external storage to my FTV and ordered a flash drive (Sandisk Ultra Flair USB 3.0 32GB) While waiting to get it I decided to see if my WD SSD USB drive ( Western Digital "My passport" 500GB) would be recognized. I plugged it into my OTG cable and I was notified that it needed to be formatted. I didn't want that so I just exited out and unplugged it. At least now I know FTV recognizes drives.
A few days later I got my flash drive but when I plugged it in it didn't see it, I thought perhaps that flash drive doesn't work with the firestick. So, I retried some other flash drives to no avail. I decided to retry my WD SSD USB drive and now it doesn't get recognized. The only answer I can find on the web is I need to turn off USB DEBUGGING but there is no option for that in developer options just ADB debugging and Unknown sources. Besides that my keyboard does work so I know my OTG cable is good.
I have reset my FTV to factory settings but still have the same issues. I also have rebooted many times.
My questions would be:
1. Where is my USB Debugging gone?
2. Why did it see my WD drive one day and not three days later?
carpenter940 said:
The only answer I can find on the web is I need to turn off USB DEBUGGING but there is no option for that in developer options just ADB debugging and Unknown sources. Besides that my keyboard does work so I know my OTG cable is good.
I have reset my FTV to factory settings but still have the same issues. I also have rebooted many times.
My questions would be:
1. Where is my USB Debugging gone?
2. Why did it see my WD drive one day and not three days later?
Click to expand...
Click to collapse
There isn't an USB debugging option for the sticks, only for the fireTV boxes... so forget about that point
About the WD drive, that could be a power issue, maybe try a stronger power supply...
If you get a new usb storage stick, you can try a format to fat32 on a PC, in case exfat doesn't work.
I had the flash drive formatted as Fat 32 and tried formatting to exfat but still nothing. I also am using a powered USB hub. I also replaced the amazon power module which was 850ma with a 1Amp but still nothing. My next attempt will be to get a flash drive that I read will work with the firestick (Sandisk ultra 32GB 3.0,
Model : SDCZ48-032G-A46).
Idk whats your goal, but here is a thread that is maybe useful for you (in case you've the 4k stick and you decide to root it):
[Magisk][Module] Amazon FireTV4k NTFS/F2FS/EXT4/exFAT OTG support
Warning !!! Use this module on your own risk !!! I can't be held responsible for any kind of damage or data loss !!! Version 1.3 and higher requires my custom kernel 6.2.7.1_v3 or higher + Selinux magisk module from the kernel thread Magisk 20.3...
forum.xda-developers.com
Sus_i said:
Idk whats your goal, but here is a thread that is maybe useful for you (in case you've the 4k stick and you decide to root it):
[Magisk][Module] Amazon FireTV4k NTFS/F2FS/EXT4/exFAT OTG support
Warning !!! Use this module on your own risk !!! I can't be held responsible for any kind of damage or data loss !!! Version 1.3 and higher requires my custom kernel 6.2.7.1_v3 or higher + Selinux magisk module from the kernel thread Magisk 20.3...
forum.xda-developers.com
Click to expand...
Click to collapse
I will try this if the new flash drive doesn't work.
Update: Turns out my firestick may have been seeing the flashdrive all the time but never gave me any indication that I plugged it in. On a hunch, I opened remote abdshell and ran the show me drives command and it popped up. I was always checking the STORAGE section of the settings but only saw internal storage.
Thank you for all your help.