Develop Bugs

[APP] DSP Manager for GS3

DSP Manager is the sound processing app from the Cyanogen Mod Team(thanks).You can customize the equalizer manually or select from a bunch of preset options.
Requirements :
Rooted GS3
Custom recovery
Installation :
Enter recovery
Make a backup just in case
Install zip from sd card
Choose zip from sd card
Select DSPManager.... Zip
Reboot
Enjoy!!
If it worked for you please report back!
Download
DSP-Manager-v2.0.zip - 345.45 KB

apascual89 said:
DSP Manager.
Attached you will find the apk in a zip file that will install as a system app. I used this on the One X, can't remember who created it, sorry. Tried it on the GS3 and it's seems to be working perfectly.
Remember that I grabbed this from the One X threads, so don't freak out when the install proccess says something about One X
Enjoy!!
Click to expand...
Click to collapse
how do u install it on s3? do u have a guide?
Thank you in advance!

seems 2be a cwm-flash, try out

Need root for this ? any conflicts with poweramp ?
thanks

no

doki81 said:
how do u install it on s3? do u have a guide?
Thank you in advance!
Click to expand...
Click to collapse
If just updated with steps and requirements.

chriskinetic said:
Need root for this ? any conflicts with poweramp ?
thanks
Click to expand...
Click to collapse
Yes you need to be rooted and have a custom recovery installed like CWM.
Shouldn't interfere with poweramp

Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
EDIT : OK tested it... And it works!!!!!!
Thanks for the share

123shree said:
Have you tested it?????
I had tried it once (not this buy my own port) and it didn't work
Click to expand...
Click to collapse
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects

apascual89 said:
I'm using it right now streaming over bluetooth. Remember to enable it in Sound/ Music Effects
Click to expand...
Click to collapse
Didn't find the need to... Just flashed it and it worked perfectly after the reboot.

hey guys iam verry happy with this DSP.Its the best DSP plugin what ever i used in my whole smartphone world and i am started by win mobile ^^
The sound is verry verry fantastic !Deep and smouth bass booster.Its so good when you listening old Alben without good dynamik, like a-ha or depeche mode.
The Treble was absolut clear an no aggressiv.
But for all power amp useres, make shure that you dont have "direct control" activate.so the DSP doesnt work !You can find it in settings-audio engine-advanced tweaks.
thanks and good night ;-)

Is it working for you guys?
190 downloads and not many replies, Has it worked for you guys?

I looking for a ver running on t989?
Anyone could share?
Sent from my SGH-T989 using XDA

It worked perfectly. Thanks a lot! :-D
Den store har talat.

Dont work for me, Wanam odex LF2 rom
Sent from my GT-I9300 using XDA

I changed the binary script so it says For Samsung Galaxy S3 instead of the HTC one X crap, for those that care

before i install it . how do you remove it if you choose to ?

dazzzdelux said:
before i install it . how do you remove it if you choose to ?
Click to expand...
Click to collapse
You can delete it from system /app using root explorer or a root level file browser

apascual89 said:
You can delete it from system /app using root explorer or a root level file browser
Click to expand...
Click to collapse
ok , thanks

I'm on Omega 5 and it doesn't have any impact on the sound coming from my bluetooth speaker.

viper audio mod

anyone want to walk me through the setup process?

coolguy71261 said:
anyone want to walk me through the setup process?
Click to expand...
Click to collapse
Are you unlocked and rooted? I believe all you have to do is copy the apk over to system/apps, launch the app, download the correct driver for your phone and reboot.

What exactly is the viper audio mod?

i ran viper on my rezound , tell me more about this please !

Best Audio Mod for Android
Have you read the official thread?? ...........http://forum.xda-developers.com/showthread.php?t=2191223
I've used this mod on my droid razr and now using it on my HTC One VZW and I could tell you guys that this is the best audio mod I have ever found, is pretty simple to use and install. Try it and if you have any problems I could help you.

ivanjbeltran said:
Have you read the official thread?? ...........http://forum.xda-developers.com/showthread.php?t=2191223
I've used this mod on my droid razr and now using it on my HTC One VZW and I could tell you guys that this is the best audio mod I have ever found, is pretty simple to use and install. Try it and if you have any problems I could help you.
Click to expand...
Click to collapse
Wow... that mod looks really impressive, but there are so many customization options I don't even know where to start. Can you simply turn the mod on and see the benefits or do you have to tweak a lot of the settings?

Download the app and then open it and it's gonna ask you if you want to install driver press yes and choose cortex 8 with neon for your HTC one and then reboot phone.
Now with Titanium Backup make v4a a system app instead of user app. After that open up /system/build.prop in text editor and change the lines:
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
Then reboot and about the settings for the app you need to try them for your liking.
Hope it helps.
Sent from my HTC one vzw using Tapatalk 2

ivanjbeltran said:
Download the app and then open it and it's gonna ask you if you want to install driver press yes and choose cortex 8 with neon for your HTC one and then reboot phone.
Now with Titanium Backup make v4a a system app instead of user app. After that open up /system/build.prop in text editor and change the lines:
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
Then reboot and about the settings for the app you need to try them for your liking.
Hope it helps.
Sent from my HTC one vzw using Tapatalk 2
Click to expand...
Click to collapse
thanks man

ivanjbeltran said:
Download the app and then open it and it's gonna ask you if you want to install driver press yes and choose cortex 8 with neon for your HTC one and then reboot phone.
Now with Titanium Backup make v4a a system app instead of user app. After that open up /system/build.prop in text editor and change the lines:
Ipa.decode=true to lpa.decode=false
tunnel.decode=true to tunnel.decode=false
lpa.use-stagefright=true to lpa.use-stagefright=false
Then reboot and about the settings for the app you need to try them for your liking.
Hope it helps.
Sent from my HTC one vzw using Tapatalk 2
Click to expand...
Click to collapse
I'm running NuSense RC7.3 rom which includes Viper. I installed the driver and disabled the settings that you suggested in the build.prop but when I look at the driver status it shows enabled/yes for everything except for processing which says no. Also, when I installed the driver it didn't give me any option for cortex or anything like that.
For some reason I can get the mod to work on my DsAudio application (streams music from my NAS) but not with the default HTC music player.
I got it working with Poweramp but it still doesn't want to work for the HTC music player.

[HOW-TO] Viper4Android on Lollipop

Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
Skip 2. and go to 3. if you are using SuperSU
2. Change to permissive mode with SELinux Mode Changer that you can download here
3. Boot into twrp and flash Viper4Android, you can download the zip from here (old link here).
3b. Reflash SuperSu
3c. Wipe cache and dalvik
4. Boot
5. Start Viper4Android and give root access
6. Still in Viper4Android, under settings switch FX Compatible mode to Compatible.
7. Reboot
8. Activate Viper4Android
9. Enjoy
Additional info:
If you use Poweramp, disable Direct volume control in settings/audio/advanced tweaks.
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.

What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk

mohammedtabish said:
What does viper4droid do ???
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
Just added the info in the first post:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.

charliebigpot said:
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
Click to expand...
Click to collapse
Thanks got it
Sent from my ONE E1003 using Tapatalk

charliebigpot said:
Since another thread is getting hijacked it might be a good idea to start talking about Viper4Android in a separate place. This is just to share some info, not a Q&A for Viper4Android.
Viper4Android FX is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
I found the guide on how to do it here, I just updated the links and added some more info:
1. You need root and twrp
1a. Make a backup in twrp
1b. Seriously, make the backup
2. Change to permissive mode with SELinux Mode Changer that you can download here.
3. Boot into twrp and flash Viper4Android, you can download the zip from here
4. Open Viper4Android and under settings switch FX Compatible mode to Compatible.
5. Wipe dalvik and cache
6. Reboot
Do it at your own risk and for technical questions about Viper4Android it's better if you post in the thread you find at 3.
Some people report it working without changing to permissive mode, others report that it's not working at all. Any feedback is appreciated.
Click to expand...
Click to collapse
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk

Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I'm currently using V4A on 2.1.3-x with no problems. :good:

Funk Wizard said:
Have u tested it on OxygenOS 2.1.3-X?
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
I've flashed it, tbh I only notice a small difference when activating it but I still have to play around with the settings. Also, I'm using Jetaudio, maybe it doesn't work that well with that.
Also, I've just changed the description in the op, according to the viper4android post I link to if you already use supersu (which is the same as in the rooting guide) you don't need to do the change to permissive mode.

Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Did you just flash it or did you also change to permissive mode?

Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Just curious, do you see a significant difference with your current v4a settings as compared to stock?

@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.

charliebigpot said:
Did you just flash it or did you also change to permissive mode?
Click to expand...
Click to collapse
For me personally, I used lolliviper in the nexus 5 forums. Flashed through TWRP and then followed by SuperSU.
No need to change the selinux.
---------- Post added at 09:25 AM ---------- Previous post was at 09:23 AM ----------
primemonitor said:
Just curious, do you see a significant difference with your current v4a settings as compared to stock?
Click to expand...
Click to collapse
With the phone speakers, not much I played around with some settings to give sound a "fuller" effect.
However with Bluetooth or wired headset, definitely noticeable.

Do you guys flash busybox also prior to all of this?

joho5 said:
Do you guys flash busybox also prior to all of this?
Click to expand...
Click to collapse
Through the play store.
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
Edit: I'm sorry I miss read the post. Yes, install busybox first then flashing V4A through TWRP.

Xtreme Music
Guys Viper works great but why don't u check out xtreme music mod too. It's the mixture of all the best music mods ..!!
http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951

parasthakur37 said:
@charliebigpot you can add in OP that in order to make poweramp work with it, disable Direct volume control in settings/audio/advanced tweaks.
Click to expand...
Click to collapse
imo, poweramp's equalizer does an amazing job already. Just ramp up the headphone gain from mixer_path.xml and you're good to go.

Mojar7070 said:
I'm currently using V4A on 2.1.3-x with no problems. :good:
Click to expand...
Click to collapse
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu

Savya said:
Could you explain how you got it working? I've tried everything man. Normal mode /compatible mode. Tried all 3 drivers. Tried both selinux modes. Even tried changing the build prop with no luck. Any ideas or tips? I am on 2.1.3x myself. Rooted with supersu
Click to expand...
Click to collapse
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.

Mojar7070 said:
First off i'll share my setup:
Recovery: Eng.stk Twrp r5
Kernel: Also by Eng.stk r61
Rom Stock 2.1.3-x
Viper4android: Use lolliviper zip from this thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I just flashed the lolliviper zip file through twrp. flash SuperSU 2.52 again just in case. wipe cache and dalvik. reboot.
after reboot, launch V4A app. grant supersu permission. install "high quality" (the middle one) driver. reboot.
Test by playing music (from storage, pandora, spotify etc.) keep music playing and then launch V4A again. go to 3 dot menu and choose driver status and it should show if its processing or not.
good luck.
Click to expand...
Click to collapse
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!

Savya said:
Duuude. I don't know how. But it worked xD crazy how simple that was yet I couldn't get it right in so many tries. More ppl should see this. Maybe OP can even add the steps into OP. Thanks mate!
Click to expand...
Click to collapse
I'll add the optional supersu step, but the rest is already there. After that it's up to each one to select between the 3 profiles at first boot.

Someone should try LolliViPER[6.0.1].zip zip on any 6.0+ ROM wit "Enforcing" kernel, see if it works.
I found this on the Nexus 5 post that is linked in the OP, guys got a bunch of Thanks for this, guess it wont hurt to try.

x3reme SoundMod

Hear the big difference with x3reme music and theater mod v2!!!
Supported with Sense 7-8, Marshmallow 6.0+
Changelog: 8/25/2016
Added HiFi Audio libs-x64 and sound effects and other files
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Side Note: Make backup if it breaks some settings send your me build.prop from the rom your using for a fix :good:
Download Below:
x3remeDSv2

It won't flash , script error

x3reme85 said:
Hear the big difference with x3reme music and theater mod!!!
Supported with Sense 7, Marshmallow 6.0
How to install:
1) Download and move it to your internal storage
2) Reboot to Recovery
3) Install the zip like any other rom/mod
4) Do Not wipe anything, just reboot and hear the difference!!!
Click to expand...
Click to collapse
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?

why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..

DeeZZ_NuuZZ said:
why do you use/took xposed framework installer and just added some files into it, which even won't really flash properly..
Click to expand...
Click to collapse
sorry everyone put in the wrong zip file thanks for the heads up :good: accidently deleted the wrong file had to do it over again lol its fix and ready to flash as just tested it myself

ZeroInfinity said:
uhhh this zip only contains a Ds.apk and a dolby config which is the stock file of M9's BoomSound presets :s am I missing something here?
Click to expand...
Click to collapse
It's an updated Ds.apk and its not a stock file its been modified which is to make the speakers more louder.

sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock

DeeZZ_NuuZZ said:
sorry to say, but it sounds weird on headphones and also speakers output is even worse then stock
Click to expand...
Click to collapse
Yeah thought so too so I added another file to fix that should be better now thanks for your opinion :good:

New Update Changelog: 8/24/2016
Added HiFi Audio libs x64 and sound effects

Has anyone flashed it yet? ��

didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look

New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:

x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
sorry am not on sense rom for now, and when i switch back i will either install viper10 when it's out or ICE10 port.

DeeZZ_NuuZZ said:
didn't tried yet, but since this needs sense rom, you need to edit the HTC_audio_effects.conf in /system/etc/ not the audio_effects. where did you take the libs from?
@ZeroInfinity please take a look
Click to expand...
Click to collapse
Libs are from 10

x3reme85 said:
New updated made more fixes boomsound setting and presets works like a charm now. Backup if some settings are broken from your rom send your build.prop for a fix :good:
Click to expand...
Click to collapse
Have you even tried it yet?? Or are you hoping every 1else will
Æaa \../

it breaks audio on htc music player and kills boomsound on ICE10 port.
and why you put a complete build.prop inside the zip, instead of making a script which changes only th things it needs.

download link does not work

michakulik said:
download link does not work
Click to expand...
Click to collapse
This mod doesn't work anyway and it's old af
Sent from my Google Pixel 3 XL using XDA Labs

Viper4Android for s6 edge plus /note 5

I have the s6 edge+ and my wife has the note 5, can't get Viper to work just like everybody else. Other phone's versions of OS use mixer_paths.xml to adjust volume/levels, but these 2 phones have a separate file titled mixer_gains.xml where volume levels can easily be adjusted. Is this separate new file the reason why Viper won't work?

Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse

ElDuez said:
Misterjunky said:
Here is a combo audio enhancer for all you audiophiles: https://www.androidfilehost.com/?fid=24562946973631338
This twrp flashable zip file contains not only viper, but this has the three finest audio enhancers in it which are fully
compatible to any android phone which has already been updated to the new Marshmallow 6.0 firmware.
This contains Dolby Atmos, Viper4android and Beats Audio all in one flash able zip file.
Also after you flash this it will only create one icon in the app drawer but when you open it it will give you a choice
of any of the three or you can even use all three at the same time if you like.
Good luck,
Have a great day.
Sent from my SM-G935F using
Click to expand...
Click to collapse
IT WORKED!!! AND IT KICKS ASS!! THANK YOU ElDuez and Mr. Junky! My ears rejoice!
Click to expand...
Click to collapse

I managed to install it, but I'm not hearing any difference... am I missing any steps in between?

mau921 said:
I managed to install it, but I'm not hearing any difference... am I missing any steps in between?
Click to expand...
Click to collapse
and false alarm! turns out it was just the Music apk I was using! all good now!