I recently just found out my LED for the track pad isn't working really. It does a quick flash when receiving a new message or notification. During calls doesn't even flash. I'm not sure if this is caused by the rom or any apps. I'm using CM 6.1.1, if anyone has the same problem, or a solution please reply back.
Its caused by the rom since u get an led notification near the speaker right?
Sent from George2.0 (G2)
Not anymore, it never occured to look up there until before when I had low battery. Everything use to light up, now the speak LED isn't lighting up, and the track pad is barely lighting... Is there a way to fix this, or the only solution is re flashing the rom. Cause if this keeps occuring and thats the only solution, I might as well just abondon this rom....
No one has have this problem, or have an idea?
Hi,
I got my Nexus a few days ago and I am quite happy with it - JB update worked immediately like a charm and it's a joy how fast everything works ...
But there is one pain point I encountered. While taking calls or calling someone the screen blanks, probably because of the proximity sensor. So far so good - but it doesn't turn on again. Then I am not able use any on screen controls, especially calling hotlines that require you to dial specific numbers while calling this behaviour is very frustrating.
I found a workaround, to setup the power button to cancel ongoing calls - this way I am able to hang up at least.
Is this a known behaviour, are there any solutions or other workarounds or am I the only one encountering this problem?
P.S.: I am running Stock Jelly Bean (4.1.1) / no root / no modifications
Am I the only one experiencing this behaviour? - any help would be gladly appreciated!
borgond said:
Am I the only one experiencing this behaviour? - any help would be gladly appreciated!
Click to expand...
Click to collapse
I have a friend with a Galaxy Nexus with the same problem. I'm wondering if you have found any solution to this or what was causing it?
This doesn't happen with my Nexus or my wife's
Either a busted proxymity sensor or a disconnected one
Under warranty ? exchange it
not under warranty ? Open it, make sure that the wires are plugged correctly. If it is and you still have the problem, replace the sensor
Hi, I haven't found a definitive solution for this issue
It just happens from time to time. Maybe the proximity sensor is kind of flaky?
I am using a combination of the Accessibility settings, pressing power button to hang up a call and screebl to keep the screen on. This works okay for me.
If you have any other intel regarding this, I'd gladly read it.
Cheers!
Sent from my Galaxy Nexus using xda app-developers app
Hi,
i´ve recently stumbled upon the auto rotation fix (i know, it has been around for a while but i wasnt affected) and wondered how a fix like that could work. i thought a full wipe is kinda... full, so nothing of the stock rom remains.
This fix has also been quoted to solve gps issues and personally, i fixed my issue with the proximitry sensor glowing red and draining all battery.
Could anybody give more details on this? if there is enough information it might be even possible to turn this rather inconvenient fix into a nice script... if not - iam still courios!
Thanks!:
Look here
http://forum.xda-developers.com/showthread.php?t=1970972
Sent from my Desire HD using Xparent Blue Tapatalk 2
Hi everyone,
TL;DR: I have an issue with the touchscreen of my Find 7 qhd (x9076), while on any other ROM than stock it my touchscreen glitches or something.
After installing a custom Rom, like PA, Dirty unicorns, CM, Nameless or any other available for this device (I believe I've tried all of them). The device works just like it should, nothing wrong with the touchscreen. But after like half a day, it starts to 'glitch'. Sensitivity is very low, when I press here it detects a press somewhere else.
I've got a temporary solution which is wiping the cache in recovery, then it works for a short period of time, but then it starts gliching again..
On stock rom the issue doesn't exists, but I realy do want to use a custom one.
Is anyone experiencing the same issue? Or maybe someone who has a solution?
Thanks in advance!
P.s every install is a full wipe, tried multiple recoveries, non-unified
I've read that the touchscreen fixes implemented by Oppo only work on ColorOS even though ROM makers have already implemented the fixes into the Roms. I'm not sure why, though
farenteria said:
I've read that the touchscreen fixes implemented by Oppo only work on ColorOS even though ROM makers have already implemented the fixes into the Roms. I'm not sure why, though
Click to expand...
Click to collapse
Hmm that's unfortunate, but it seems to me that I am one of a few people having trouble with this? Why don't other x9076 users have this problem?
B-vb said:
Hmm that's unfortunate, but it seems to me that I am one of a few people having trouble with this? Why don't other x9076 users have this problem?
Click to expand...
Click to collapse
Not sure. I personally have never had that problem
I want to bump this thread, i have this problem aswell and still it isnt fixed. anyone has a idea what to do about it ?
B-vb said:
Hi everyone,
TL;DR: I have an issue with the touchscreen of my Find 7 qhd (x9076), while on any other ROM than stock it my touchscreen glitches or something.
After installing a custom Rom, like PA, Dirty unicorns, CM, Nameless or any other available for this device (I believe I've tried all of them). The device works just like it should, nothing wrong with the touchscreen. But after like half a day, it starts to 'glitch'. Sensitivity is very low, when I press here it detects a press somewhere else.
I've got a temporary solution which is wiping the cache in recovery, then it works for a short period of time, but then it starts gliching again..
On stock rom the issue doesn't exists, but I realy do want to use a custom one.
Is anyone experiencing the same issue? Or maybe someone who has a solution?
Thanks in advance!
P.s every install is a full wipe, tried multiple recoveries, non-unified
Click to expand...
Click to collapse
Try to flash back stock recovery then flash COS 1.20 in systembase, then upgrade to COS 1.25, Then upgrade to 2.0 or above. Then flash custom recovery and rom again. This is the step you will not have problem in custom Rom. I am 100% sure.
Sent from my X9070 using XDA Free mobile app
I have the same problem, and I'm running Stock OS.
v2.1.4i Beta
This is how I bought the phone, interesting that it reads Beta...
I've updated to the latest firmware and still having touch screen sensitivity issues.
Someone has got too have some advise.... Oppoooooo.....
TouchScreen Auto Test - FAIL
I did the TouchScreen Auto Test and showed FAIL. Has anyone else shown this error?
Hi, I am having exactly same touch screen problem with custom roms, have tried both Omni and crDroid.
Is there a solution for this? I didn't have this problem in COS before.
What's the auto test?
I‘m on COS 2.1.5I and sensitivity works ok so far. I did have auto brightness problems but xposed and gravitybox has helped me adjust a lot of that out. Now it doesn‘t over dim in low light.
Auto test in COS is ok, I only had this problem in custom Roms, COS worked smoothly,so I reckon it's could be driver issue in custom Rom, maybe there are new fix for some panels are not included in custom Rom.
I never had any problems with touchscreen on find 7 until now. I have been extremely satisfied with this device until now. I have the find 7 9076.
There is a lengthy discussion of this touchscreen problem on the oppo forums.
My opinion is, it has nothing to do with the rom or firmware. It is a physical problem caused by heat. Once overheated, the digitizer gets somehow damaged.
I left my phone on a table in direct sunlight for hours while working on my lawnmower. I noticed it got very hot to touch. Ever since then my touchscreen has problems where there were no problems for 2 years prior. Dead spots, phantom touches and behaves sluggish in certain spots. Upper screen in portrait.
I tried wiping and reinstalling. Nothing works to fix this.
I even tried sealing it in a ziplock bag and freezing it. This actually works but its only temporary. The digitizer got damaged from heat. There is no "software" fix.
The only solution I can see is to physically replace the digitizer. This is a difficult thing to do but can be done.
I am considering replacing replacing the entire screen along with the digitizer as this is much easier but the problem is getting the high res replacement. Most after market screens are not equal to oppo's. The cost of OEM is too high.
Shame because this problem makes me now shy away from oppo devices.
Okay,
I opened up the phone.
Set to try and pry off/seperate the digitizer and replace with new one.
Decided to try something first.
Unplugged the digitizer and held power button (to release any stored up energy in the phone). Resnapped in digitizer cable to connector.
Reassembled the phone.
Put battery back in. Rebooted.
Sure enough, its all working. The full touchscreen is working with no dead spots or glitches.
For how long? Who knows?
Keeping this thing out of the heat.
Hi guys, I'm currently on AEX 4.6, everything is running smoothly but all of the sudden my fingerprints sensor is not working as well as the slide options. The actual button works. It clicks so I'm managing to use the phone normally but no u-touch function. I've already tried different roms and nothing seems to work. Has anyone experienced a similar problem? I'm afraid it's a hardware problem.
I'm glad to say that I found the solution for this problem on another thread. The sensor driver might have had an issue, so installing it again will solve the malfunction. After all it wasn't a real hardware problem. Just download the file I'm sending and restart your phone so it'll come back to life again :laugh:
Here's the link:
dropbox. com/s/0gqvvfzae4exi12/sensor.zip?dl=0
PS: it didn't work at first with me. So I sort of gave up then I tried another time and it worked.