Develop Bugs

Miui

Do i have to have stock .587 to flash in the latest miui update from this post http://forum.xda-developers.com/showthread.php?t=1851262
And also, when i install the rom, do i just run Aroma installer instead of wiping cache and dalvik then flashing the rom in?
Thanks

I currently using .562 and when i install, i cant get pass the booting stage, it is stuck on "SONY"

Lockable said:
I currently using .562 and when i install, i cant get pass the booting stage, it is stuck on "SONY"
Click to expand...
Click to collapse
Did you flashed the MIUI kernel?

no
where can i find that?

Is the "boot.img" inside the MIUI.zip
(only if you have unlocked bootloader)
or you can go back to stock rom using sony update service

There are no boot.img inside the MIUI.zip,

Overdose1986 said:
Is the "boot.img" inside the MIUI.zip
(only if you have unlocked bootloader)
or you can go back to stock rom using sony update service
Click to expand...
Click to collapse
Lol! We Have 2 Use Stock Kernel With CWM. SInce its BAsed on FW.587..

[Q] LT26 stuck at Sony logo after failed flashing

Hello, at start I apologize for my poor english, but I hope, that you'll understand what's the matter.
First I prepared to install new rom on my Xperia - I've rooted phone and installed CWM. After that I've launched CWM, then I've erased whole phone's memory - cache, system, data and dalvik. When I want to install rom from .zip file i get info, that file is bad. Next I've tried to launch mass storage mode to copy rom one more time and CWM was unable to open ums lunfile. When I've rebooted phone only thing I saw was Sony logo. Now I'm stucked at it. Phone have locked bootloader, so I can't launch fastboot mode. Adb can't find any connected devices. What can I do now?
Best redgards,
Kacper W.

Obi343 said:
Hello, at start I apologize for my poor english, but I hope, that you'll understand what's the matter.
First I prepared to install new rom on my Xperia - I've rooted phone and installed CWM. After that I've launched CWM, then I've erased whole phone's memory - cache, system, data and dalvik. When I want to install rom from .zip file i get info, that file is bad. Next I've tried to launch mass storage mode to copy rom one more time and CWM was unable to open ums lunfile. When I've rebooted phone only thing I saw was Sony logo. Now I'm stucked at it. Phone have locked bootloader, so I can't launch fastboot mode. Adb can't find any connected devices. What can I do now?
Best redgards,
Kacper W.
Click to expand...
Click to collapse
Just flash stock ftf through flashtool using flashmode & everything will be fine.
Press Thanks
Sent from my Xperia S using xda premium

RISHI RAJ said:
Just flash stock ftf through flashtool using flashmode & everything will be fine.
Press Thanks
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
Uncheck wipe data and wipe app log before flashing so u won't lose any data.
Sent from my LT26i using xda app-developers app

Thank you for responds. I totally forgot about possibility of flashing stock rom via flashtool, it solved my problem.
Best redgards,
Kacper W.

Help Please.
hello, I have a Xperia S and I flash it with turborom +, but now it is stuck in the sony logo and I do not know how to do it back to normal, I tried the seus but it returns me a message that the device contains software modified and will not fix it.
any help will be appreciated.

lecoy1 said:
hello, I have a Xperia S and I flash it with turborom +, but now it is stuck in the sony logo and I do not know how to do it back to normal, I tried the seus but it returns me a message that the device contains software modified and will not fix it.
any help will be appreciated.
Click to expand...
Click to collapse
Use flashtool and flash a stock ftf.
You must have unlocked your bootloader and hence seus gives that error.

abcdjdj said:
Use flashtool and flash a stock ftf.
You must have unlocked your bootloader and hence seus gives that error.
Click to expand...
Click to collapse
yes, I unlocked it, I made a flash with a stock 2.3.7 rom, but I want the ics but I can not find a cwm for this rom.

lecoy1 said:
yes, I unlocked it, I made a flash with a stock 2.3.7 rom, but I want the ics but I can not find a cwm for this rom.
Click to expand...
Click to collapse
Okay, so here is what you must do :-
1. Download stock ics ftf from here - http://ni.0a0.in/files/3432_kznsa/LT26i_6.1.A.2.55_SG Generic (1257-6921).zip
2. Extract the zip to get the ftf file.
3. Flash it with flashtool
4. Flash this custom kernel - http://forum.xda-developers.com/showthread.php?t=1729280
5. Then go and check out any custom roms that you like
All (most) custom kernels have CWM in them. As you have unlocked your bootloader, you can flash a custom kernel and get CWM. Also, each time you wipe /system nothing will happen to CWM. CWM remains intact
Good luck!

thanks
abcdjdj said:
Okay, so here is what you must do :-
1. Download stock ics ftf from here - http://ni.0a0.in/files/3432_kznsa/LT26i_6.1.A.2.55_SG Generic (1257-6921).zip
2. Extract the zip to get the ftf file.
3. Flash it with flashtool
4. Flash this custom kernel - http://forum.xda-developers.com/showthread.php?t=1729280
5. Then go and check out any custom roms that you like
All (most) custom kernels have CWM in them. As you have unlocked your bootloader, you can flash a custom kernel and get CWM. Also, each time you wipe /system nothing will happen to CWM. CWM remains intact
Good luck!
Click to expand...
Click to collapse
Thank you, you saved my life (I have this xperia only two weeks)
the procedure worked very well, I'm testing some roms like turborom, CM9 and others.:laugh:
Thanks again, I knew I could count on the staff of XDA.:highfive:
sorry for my english is not my native language.

[Q] help with xperia sl and pacman

hello
sorry for bad english
will i've follow the steps to install pacman ROM on my sl
" nozomi_PAC_JB_4.2.2-v20.1.0_Themed v2 "
now i wont to install " XZXperience_2_3 "
i've downloaded it and copy the zip file to sdcard ,, open recovery mode in CWM and install it
the problem that when i started the phone the pacman logo appers and after that give me black screen and nothain happen
tried also the stock 6.a.2.55 as zip in the same way and give me the same thing
help plzzzzzzzzz
what can i do to restore my phone ?!?!?!?!!

Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk

now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy

Ben36 said:
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Speka-3- said:
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Click to expand...
Click to collapse
thank you both
i've soved it myself
with flash tool
flash the orgnial ICS .55 and install recovery ics14.elf by fastboot and the installed the ROM
thanks ^_^

Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!

Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
1. Open zip file and copy boot.img to fastboot folder
2. Right click and select " Open cmd here" (Win7)
3. Type these commands
- fastboot flash boot boot.img (Wait when its done after few sec)
- fastboot reboot ( or unplug the cable and turn on your phone)
4. Now, boot into CWM to flash Rom
Take notice that you have to install fastboot driver first. Good luck :fingers-crossed:

Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
if you have a CWM Recovery in your kernel(like FXP's CM9 or CM10 kernel)
just copy the zip(you download from the PAC thread) to the internal storage
then boot into CWM, wipe,flash the zip,enjoy
recovery will flash boot.img automatically
if no work, try flash the boot.img manually, like the way on 6# reply

Lilude & Speca, thank you both for a quick reply, btw, your English is perfect.
Wow! So a different kernel can be flashed with the rest of the packet from recovery/cwm without needing a pc, (except for copying to sd card) .
A new bit of knowledge for me!
I'd click your thanks buttons if I knew how, but as you can see I'm new to the forum & still finding my way about.
Noobs of the world unite.

Both ways are fine but better flash separately in such situation. It definitely helps you avoid a broken CWM happening after that such as : can't backup the current Rom, can't mount system as well as can't flash anything, etc.. aside from having to reflash Stock Rom,otherwise the phone gonna get stuck on boot . How terrible !
Make your choice and do not mess up your phone, huh ?
Sent from my Xperia S using Tapatalk 2

If you say flashing the boot.img from my pc first is the safest option then I'll use that method.
I've already messed up several times when I was in stock, without a recovery, luckily EMMA came to the rescue.
Since custom rom cm10 I can't flash updates or anything else without a factory reset, partition & dalvic wipe is never enough.
So taking my time for this rom, download tonight, fingers crossed
______
Xperia s : fxp 212 nozomi
++++++++++++++++++
OK!
flashed boot.img
wiped everything
fixed permissions
mounted system
flashed PAC
rebooted
went back to recovery
flashed gapps
rebooted.
Works perfectly so far!
also I reinstalled my own apps manually instead of using titanium back up. I read this hint in the PAC v22 thread / dev section.
maybe this is 1 of the reasons I'm not having the odd problem that a few others are experiencing. who knows?
thanx all for helping
......................
Xperia S : PAC v22

[Q] Can't put CWM onto my Xperia Arc after using EMMA

Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice

Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた

popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again

GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた

popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice

I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?

GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた

Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img

installing super jelly bean

So im not quite fammiliar with xperia devices but im trying to install the latest sjb rom, i dont get the part to flash the kernal before flashing the cwm recovery and the rom. I download fusion kernel v5.5 but i get a .img file, the flashtool wants a.sin file(when i tryto use "select kernal to flash"). I tried to do a full wipe, then flashing sbj trough cwm recovery but it just goes into a bootloop. Flashed 0.537 firmare to get it to normal status again. bootloader is unlocked,atleast it said "bootloader unlocked allowed=yes" in phone info.

1. Did you set Flashtool to fastboot mode?
2. Is the kernel compatible with the ROM?
僕のLT18iから送られてきた

its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy

pitastrudl said:
its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy
Click to expand...
Click to collapse
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2

Attitude.SSJ said:
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?

pitastrudl said:
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?
Click to expand...
Click to collapse
Flash jb kernel for your device only... You need unlocked boatloader to flash custom kernel... Custom kernels are needed to boot non stock roms... With cwm you can flash rom but that doesn't mean it will boot without the corresponding kernel...
Sent from my Xperia Neo V using Tapatalk 2

You guys have no idea, what this topic is about.
pitastrudl said:
the flashtool wants a.sin file(when i tryto use "select kernal to flash").
Click to expand...
Click to collapse
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
EDIT: Unlock your bootloader first as well. It must show "bootloader unlocked: yes" in the menu.

Someguyfromhell said:
You guys have no idea, what this topic is about.
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
Click to expand...
Click to collapse
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2

Attitude.SSJ said:
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Missed that, edited my post. Cheers!

thanks for the answers, but i already gave the device back to my friend, i was forced to install a custom rom based on ics so had no time to unlock bootloader. he needed it for work. i will probably get it again some time and unlock the bootloader. thanks again for your answers and time. I've done alot of rooting different devices but this one has giving me a hard time, maybe coz i didnt search very thoroughly and my lack of time. cheers and have a good day
Sent from my GT-I9505

i just install SJB8.0 on yesterday and found after i reboot device all shortcut in desktop that i move data to SD card disappear
but for shortcut that the data keep in phone no have any problem.
anyone can help me for this problem.
sorry for poor english

If I understand properly, you cant access files/apps that you previously backed up to sd card?
Anyway guys, Im having a really weird problem with SJB 8.0, I downloaded rom, gaps, patch and kernel, then copied everything except kernel to sd card, flashed kernel (and it worked), then I did full wipe but when I tried to flash rom, I got an "installation aborted error (bad)".
The interesting thing is that when I try to extract the rom (AND gapps) on computer, I also get an error for both of the files (the file is damaged/corrupted etc.).
So is there a problem with files (rom and gapps) on dev-host or what? It's wierd cuz patch for arc can be either flashed or extracted on computer.
Please help. :/
EDITED:
Okay problem solved, the gapps and rom files were corrupted so I had to download them couple of times to get it working (tried to extract it first on comp. to check) and then it worked while flashing too, so everything's good now.