Develop Bugs

Flashing problem

Hey guys!
My Xperia Arc S is kinda new - 1 month old.
I was on Xperia Ultimade HD Rom for a while and wanted to install another rom, so i did via CWM Recovery.
All fine.
I wanted to restart my phone but it got stock in Sony Logo.
Because my bootloader cant be unlocked i rooted with kernel downgrade and CWM is not there after flashing due to the wipe.
So i flashed stock .tft with Flashtool and phone booted again.
Now when I'm trying to flash anything my phone gets always stuck in Sony Logo (even when i try Eagleboy's mode without wiping!).
Anyway: I'd like to install a custom rom.
Does anyone how to fix this?
Bootloader: Locked
Phone: LT18i
Rooted: yes
... and I have the 4.0.1.B.0.587 firmware installed right now.
Thanks in advance!

Phone Flashing problem
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:

tallman43 said:
That's the only problem with locked bootloader's:crying:When you install some stock custom roms you have to wipe system to do a clean install which by default wipes cwm because it is installed in system for locked bootloader's.So if you have a problem with a install you have to flash another .ftf because you wiped cwm recovery.
When I first had arc I had a locked bootloader and it was a pain if something went wrong while flashinghaving to flash again etc! etc! It just got to stage where I had enough and took the plunge and unlocked the bootloader.:good:
I'm afraid it's one of those things you have to live with unless you unlock your bootloader:crying: ( I know you said you can't )there are quite a few stock roms that work but like I said if anything goes wrong you have to flash .ftf again.Probably a case of just trying each one Jader's rom alway's seemed to boot nice:good:
Click to expand...
Click to collapse
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.

Galaxy3User said:
Hi, thanks for your answer
I tried to install 3 different roms till now - i wiped everything.
Then: Boot till sony-logo - I have to flash another tft with flashtool, Root again, and this takes time and is quite annoying.
I came from Samsung Galaxy S there wasn't the problem with the "bootloader" which is really annoying.
So: What should i do now?
I mean my CWM is not persistent and till now no rom worked.
Click to expand...
Click to collapse
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm

tallman43 said:
Hi totally agree it is frustrating!:crying: When you install some of these custom rom's they use Aroma installer are you unticking the reboot option in aroma installer and rebooting from cwm?Because you need to reboot that way (you seem to be doing everything right )
(1) Boot to cwm
(2) Wipe cache/Data/Advanced Dalvik cache
(3) Mounts & Storage format data/cache/system (NOTHING ELSE!)
(4) Install .zip on Sd card
(5) Choose options Aroma Installer
(6) Untick reboot option
(7) Reboot from cwm
Click to expand...
Click to collapse
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work

Galaxy3User said:
Yes i know , but thats what i did !
Wiped & formatting these settings and unticking reboot in aroma.
But it still doesn't work
Click to expand...
Click to collapse
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:

tallman43 said:
:crying:Like I said you seem to be doing everything rightHave you tried this rom http://forum.xda-developers.com/showthread.php?t=1994135 it's a two part installation but if I remember right this one seemed to install ok:good:
Click to expand...
Click to collapse
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?

Galaxy3User said:
Haha i know. Thats why it seems strange for me too. But i need a custom rom and normally i would need a different kernel too.
But thats not possible. Sadly.
So nobody knows what i could change?
Click to expand...
Click to collapse
Only other thing you could try is changing your base firmware/ftf I notice you are using .587 base ftf try changing to another one, although Some of the custom roms recommend that firmware
Maybe someone else as any ideas

Απ: Flashing problem
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc

Retrosid said:
If you accidentally formatted system then you removed the cwm. Try flashing the official ftf, install x-parts and redo everything without wiping system partition.
The other choice is to unlock your bootloader and you'll never face this problem again. I voided my warranty less a month after taking my phone, I knew that any problem will come up I could fix it myself
Sent from my Xperia Arc
Click to expand...
Click to collapse
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.

.. But the strange thing is just:
I even get bootloop when I install EAGLEBOYYS MOD (!) without WIPING anything! (just the recommended for sure)
That should not happen.

Why can't you unlock bootloader? Doing that would solve most of the problems you are facing. You don't have to downgrade to re root. Flash the stock kernel, install a new recovery then try again.
Sent from my Xperia Arc S using xda premium

If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.

Galaxy3User said:
Yep sure - but my CWM is gone when i wipe data. And I tried this: I flashed stock .ftf and installed xparts, then flashed a ROM without wipe - but doesn't boot and I cant access CWM again :/
And as I said i can't unlock my bootloader.
Click to expand...
Click to collapse
Galaxy3User said:
If I go in service menu it says: Bootloader Unlock Allowed: No !
If I flash stock .ftf root is gone (?) -- RootChecker says that root is gone too.
Click to expand...
Click to collapse
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248

TopperBG said:
First of all - this thread: http://forum.xda-developers.com/showthread.php?t=1683957
I advice you to take step by step STRICTLY.
Or you can try to root with the FlashTool but I'm not sure if it will work with locked BL.
After that: http://forum.xda-developers.com/showthread.php?t=1955248
And for additional info: http://forum.xda-developers.com/showthread.php?t=1955248
Click to expand...
Click to collapse
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
If you can't get it to work (stuck on Sony logo), then flash this in flash tool and then root again and do it one more time.
It´s ICS and kernel for Arc S but works fine on regular Arc. I use it myself on my Arc.
http://www.mediafire.com/?r0anos8emtx4iiy password is MMAS (If asked for)
Good luck and have fun with your superfast Arc with Ultimate HD™ ROM 2.0.
Click to expand...
Click to collapse
And this download link doesnt work :/

Galaxy3User said:
Thats how i rooted my Arc S!
Thats the only method that is working with locked BL.
And well, i took all the steps mentioned in the second topic you posted..
And this download link doesnt work :/
Click to expand...
Click to collapse
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j

TopperBG said:
Here it is:
https://www.box.com/s/yu3dbp760kkyw7osoo41
https://www.box.com/s/9prbhnvkmyrglyoyl20j
Click to expand...
Click to collapse
I flashed these files already after i got stuck at SONY logo but doesnt help..

Galaxy3User said:
I flashed these files already after i got stuck at SONY logo but doesnt help..
Click to expand...
Click to collapse
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens, did you have newest version of FlashTool, did you have installed ADB drivers, what's the error ?

TopperBG said:
What does mean "doesnt help" ?
What are you trying to do and dont work, what is messages, what happens,
did you have newest version of FlashTool, did you have installed ADB drivers,
what's the error ?
Click to expand...
Click to collapse
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.

Galaxy3User said:
I mean when i flash this .ftf and reroot and install CWM all works fine.
But when I try to flash any ROM and doing all wipes etc. correctly it still gets stuck at SONY logo!
I have newest version of flashtool and ADB drivers installed. In flashtool there is no error.
Click to expand...
Click to collapse
Which ROM are you trying to flash?
Is that ROM for locked BL ?

Stuck at CM9.1 animation after flashing Xperia S

Hi !
I have a locked A.55 Xperia S from Dubai and were trying to install CM9.1 (stable) but now, its stuck at the Cyanogenmod animation. I waited for like 10 minutes but it just won't go from there. Re-flashing the kernal and wiping and then re-installing CM9.1 didn't work.
What I did:
1. Installed the drivers from Google dev website with fastmode driver from Sony dev site.
Selected the ADB mode driver (not the bootloader driver) for the S1boot device in Device Manager.
2. Rooted using Easy Root 1.2 (chinese version)
(success, I could see superuser process in the apps)
3. Unlocked bootloader using the fastmode as mentioned in Sony's website.
4. Downloaded the CM9.1 nozomi from CM website and Gapps from another website and copied to the root of the internal memory (Xperia doesn't have memory card ?)
5. Installed CWM recovery (6.0.3 ?) using Recover X
6. Flashed CM kernal from the CM9.1 nozomi zip (boot.img) using flashtool 0.9.11
7. Backed up the existing data using CWM.
8. Flashed CM9.1 nozomi using CWM and then Gapps. Factory reset and Cache clear.
9. Stuck at FreeXperia logo
10. Gone to CWM and restored the backup but it gave an error with "can't format with mkextf4 /dev/block/mmcblk3322 (or something like that)
11. Stuck at XPERIA logo (animation)
12. Installed the CM9.1 and Gapps and then factory reset, cache reset and Dalvik cache clear (when I press on "clear Dalvik Cache", I don't see any message in the log btw)
13. Stuck at CM9.1 Robot animation (the matrix ?)
Please help guys...its my only phone and I'm a busy guy regarding phone calls and emails
Thanks for reading

Does flashing a different kernal a good idea ?

Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.

AndroidNoob69 said:
Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.
Click to expand...
Click to collapse
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !

x.marX said:
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !
Click to expand...
Click to collapse
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.

AndroidNoob69 said:
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.
Click to expand...
Click to collapse
Copy that !

But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?

x.marX said:
But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?
Click to expand...
Click to collapse
Flash, root, redownload the rom and stock cm kernel, and try again.

AndroidNoob69 said:
Flash, root, redownload the rom and stock cm kernel, and try again.
Click to expand...
Click to collapse
I have checked the md5 sum...which matches with that in the CM website.
Is there any other ROM with good battery backup ?

Man ! I hate this
I have installed the drivers from the driver folder in the flashtool but when I connect my mobile in flashmode (green led), the add hardware wizard pops up and within 2 seconds, the phone boots up freezing the system.
The flashtool displays an error saying "install drivers".
I have installed all drivers using flashtool's driver installer but why does it still say its not installed ?

Are you using windows 8?

You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app

amey_gangal said:
You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Its unlocked

AndroidNoob69 said:
Are you using windows 8?
Click to expand...
Click to collapse
No, windows XP
AndroidNoob69 said:
Its unlocked
Click to expand...
Click to collapse
Yup !
BTW, I tried another system with more updated Windows where I could install the driver using hardware wizard successfully but the flashtool gives an another error now and the phone boots up.
Didn't note the error down...gonna do it again to see what it says !
EDIT:
Can I use fastboot mode instead of flash mode in the flashtool ?

Now, it doesn't even recognize the phone....I mean, even if I connect it in flash mode (green led), the flashtool doesn't start the flashing
EDIT:
Is there any way I could access its memory ?
I'm thinking about downloading a stock ROM and kernal and flash it using CWM.

A miracle has happened!!
I could flash the firmware successfully., thanks JZ
Now I'm wondering whether I should go ahead and flash the cm9.1 again!!

[Q] Can't put CWM onto my Xperia Arc after using EMMA

Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice

Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた

popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again

GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた

popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice

I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?

GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた

Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img

installing super jelly bean

So im not quite fammiliar with xperia devices but im trying to install the latest sjb rom, i dont get the part to flash the kernal before flashing the cwm recovery and the rom. I download fusion kernel v5.5 but i get a .img file, the flashtool wants a.sin file(when i tryto use "select kernal to flash"). I tried to do a full wipe, then flashing sbj trough cwm recovery but it just goes into a bootloop. Flashed 0.537 firmare to get it to normal status again. bootloader is unlocked,atleast it said "bootloader unlocked allowed=yes" in phone info.

1. Did you set Flashtool to fastboot mode?
2. Is the kernel compatible with the ROM?
僕のLT18iから送られてきた

its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy

pitastrudl said:
its this rom http://forum.xda-developers.com/showthread.php?t=2134257&highlight=recovery
i dont understand step number 2
0.Only for unlocked bootlader
1. Copy super jelly bean and gapps to sd card
2. Flash any jb kernel for neov via fastboot.. i recommend fusion kernel 5.4 (present inside the zip file )
3.[OPTIONAL] flash stock ics .587 ftf excluding kernel and simlock.ta files..
4. boot into recovery
5.Perform Full Wipes
ie :
wipe data / factory reset
wipe cache partition
wipe dalvik cache
in mounts and storage , wipe system , data and cache
6.Flash Super Jelly Bean Rom
8.Flash the patch for your respective devices.
7.Flash gapps , Provided in download page
8.Boot
9.Let the rom settle for 15 to 20 minutes
10.Reboot at least once in 2 days
11.Enjoy
Click to expand...
Click to collapse
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2

Attitude.SSJ said:
Well you need to unlock boatloader... Simply having unlock allowed yes won't do... Once you unlock you can flash the required kernel in fastboot...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?

pitastrudl said:
but why does it want to flash a kernel for neo v? lol a different device. also why would i need to unlock bootloader since i already installed a perfectly working cwm and rooted the phone?
Click to expand...
Click to collapse
Flash jb kernel for your device only... You need unlocked boatloader to flash custom kernel... Custom kernels are needed to boot non stock roms... With cwm you can flash rom but that doesn't mean it will boot without the corresponding kernel...
Sent from my Xperia Neo V using Tapatalk 2

You guys have no idea, what this topic is about.
pitastrudl said:
the flashtool wants a.sin file(when i tryto use "select kernal to flash").
Click to expand...
Click to collapse
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
EDIT: Unlock your bootloader first as well. It must show "bootloader unlocked: yes" in the menu.

Someguyfromhell said:
You guys have no idea, what this topic is about.
Open the window, where you are supposed to choose the kernel file from. At the bottom of that window, look for a small drop-down clickable menu (by default there is *.sin written). Open the menu, choose *.img from the list and then you can flash the kernel.
Click to expand...
Click to collapse
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2

Attitude.SSJ said:
Ya that's true but he seems to have a locked bl in the first place...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Missed that, edited my post. Cheers!

thanks for the answers, but i already gave the device back to my friend, i was forced to install a custom rom based on ics so had no time to unlock bootloader. he needed it for work. i will probably get it again some time and unlock the bootloader. thanks again for your answers and time. I've done alot of rooting different devices but this one has giving me a hard time, maybe coz i didnt search very thoroughly and my lack of time. cheers and have a good day
Sent from my GT-I9505

i just install SJB8.0 on yesterday and found after i reboot device all shortcut in desktop that i move data to SD card disappear
but for shortcut that the data keep in phone no have any problem.
anyone can help me for this problem.
sorry for poor english

If I understand properly, you cant access files/apps that you previously backed up to sd card?
Anyway guys, Im having a really weird problem with SJB 8.0, I downloaded rom, gaps, patch and kernel, then copied everything except kernel to sd card, flashed kernel (and it worked), then I did full wipe but when I tried to flash rom, I got an "installation aborted error (bad)".
The interesting thing is that when I try to extract the rom (AND gapps) on computer, I also get an error for both of the files (the file is damaged/corrupted etc.).
So is there a problem with files (rom and gapps) on dev-host or what? It's wierd cuz patch for arc can be either flashed or extracted on computer.
Please help. :/
EDITED:
Okay problem solved, the gapps and rom files were corrupted so I had to download them couple of times to get it working (tried to extract it first on comp. to check) and then it worked while flashing too, so everything's good now.

Q) Xperia S l26i rooted,unlocked bootloader. Now stuck in bootloop. Please HELP

Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh

ssuresh005 said:
Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh
Click to expand...
Click to collapse
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.

Mirhawk said:
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.
Click to expand...
Click to collapse
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh

ssuresh005 said:
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh
Click to expand...
Click to collapse
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.

Mirhawk said:
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.
Click to expand...
Click to collapse
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh

ssuresh005 said:
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh
Click to expand...
Click to collapse
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img

Mirhawk said:
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img
Click to expand...
Click to collapse
Bro. I flashed this recovery and now after reboot phone is going to recovery only. I manually tried to reboot it to bootloader and it is getting to TWRP recovery only. I tried to flash a Kitkat rom which was in my internal memory as zip file it failed with error " error executing updater binary in zip" did google search on it and got to know to overcome this error I had to be on TWRP 2.8.0.1 but we are already in that code, I dont know why I was still getting that error.
So I used the ftf file again to flash . I followed the forum "http://forum.xda-developers.com/showpost.php?p=28305266&postcount=3" to get the ftf file. I could see there are ftf for ginger bread and ICS , but I could only flash Ginger bread since I am getting error when I flash ICS ftf. not sure why.
Now having stock Ginger Bread rom rooted and bootloader unlocked.
I am happy that you brought me this far. It Would be great if you could guide me to proceed further to install any custom recovery and any custom rom of Jelly bean and higher. :good:
- Suresh
I also wanted to try something before you come online . so flashed the custom recovery which you have provided and flashed cyanogenmod 9 latest nightly and current status is
Rooted, bootloader unlocked, installed custom recovery(TWRP){with your wonderful assistance} , flashed cyanogenmod 9 nightly(ICS)
All I need now is a jelly bean rom or KITKAT rom (preferable )

ssuresh005 said:
All I need now is a jelly bean rom or KITKAT rom (preferable )
Click to expand...
Click to collapse
My Bad, that procedure installs a Kernel, and since it was not compatible with the ROM You were using, it only booted to the twrp. Copy the file to Your internal sdcard and use these following commands on Terminal Emulator app from playstore:
Code:
su
dd if=/sdcard/fotakernel.img of=/dev/block/mmcblk0p11
where fotakernel.img is the name of Your .img file.
It was weird that You go that error while flashing a Kitkat ROM. Which ROM were You trying to flash? If You wan to flash a Kitkat ROM, then follow the procedure here, no matter which Android version You are on, no need to do anything else.