i`m just wondering i can`t get rid of lags in the Snesoid Emulator,also in Tiger Arcade,there are sound glitches all over the place,it is horrible..i`m running 2.3.3(xloud update) with doomlords kernel v3,i fiddled with all the settings but no cure,still occasional lags(gensoid on the other hand runs silky smooth,keeps me wondering..) the latest tiger arcade version is the worst for me,seems like every game is slowing down for a few seconds to 5fps or soemthing,then it speeds up to full speed,then lagging again,its driving me nuts..
what cpu governor do you guys use and what kernel scheduler,is it maybe because of the OC kernel that everything lags? (read about something with emulators and OC kernels,that they can cause lags)-i set it to noop scheduler and use the smartass v2 governor,OC is 1.2ghz,also tested it with stock speed or other scheduler settings like bfq or vr,no change..thinking about reverting to stock kernel just to see the difference..
I actually found that Snesoid really speeds up at 1.5ghz.. below that doesn't really do much for me. Definitely recommend sticking with smarta**v2 and noop though. Also you should use the latest firmware and latest DooMKernel for best speed.
thanks for the reply mate,i`ll give the latest firmware a try today,just to see if it will anything do to the emulator performance
jacklebott said:
I actually found that Snesoid really speeds up at 1.5ghz.. below that doesn't really do much for me. Definitely recommend sticking with smarta**v2 and noop though. Also you should use the latest firmware and latest DooMKernel for best speed.
Click to expand...
Click to collapse
Imo InteractiveX and noop is the best combination
Ive had no troubles with sensoid, all the games ive tried run at full speed even at the stock 1ghz.
Maybe you should try some other snes emulators, Snes9x is my favorite. You can get it free at the devs website: http://www.explusalpha.com/home/snes9x-ex/downloads
supercharger v6 update 9 what setting do you have? what is best for least game lag
Its recommended to use option 7 and then to run option 20 for Nitro lag nullifier. I used both those settings, rebooted. Now my phones so fast my eyelids flap in the wind.
Also, I overclock my phone just a wee bit to 1.2ghz, with DooMKernel. I use Performance on Goivernor, and bfq on I/O Scheduler. Between the V6 and the oc my phone flies
Sent from my R800x using xda premium
jgregoryj1 said:
Its recommended to use option 7 and then to run option 20 for Nitro lag nullifier. I used both those settings, rebooted. Now my phones so fast my eyelids flap in the wind.
Also, I overclock my phone just a wee bit to 1.2ghz, with DooMKernel. I use Performance on Goivernor, and bfq on I/O Scheduler. Between the V6 and the oc my phone flies
Sent from my R800x using xda premium
Click to expand...
Click to collapse
What about battery life ?
Can some other user share its fav. settings?
lyricalchaos said:
supercharger v6 update 9 what setting do you have? what is best for least game lag
Click to expand...
Click to collapse
I know this thread is old but; I recommend Nitro Lag Nulifier And Option 7 Aggresive 512HP and I clock my CPU at 1Ghz and govenor is intellDemand2 and I/O Schedular is Deadline for normal usage but i change I/o Schedular to BFQ when im playing Miencraft cus This enables faster write speeds and minecraft makes saves and etc.. so the maps will be generated faster!,C:
And for gamign i OC to 1.6 Ghz only on Heavy Games and i put Govenor to SuperBad and I/o Schedular to deadline!
Enjoy!
Hi. I want to know which kernel is best for the best gaming experience. I want to play without lagging. Can anyone help me?
Sent from my R800i using Tapatalk 2
DooMKerneL, there's nothing better
jacklebott said:
DooMKerneL, there's nothing better
Click to expand...
Click to collapse
I have already try this but the games are lagging (Reckless Racing 1 and 2, Rainbow Six, etc..). Can it be beacouse i am on stock rom?
What version of Doomkernel do you have? v11 and v13 2013 have a GPU overclock which caused some of our phones to underperform. v13 3013 should be fine for everyone.
I actually got very slightly higher 3D graphics Antutu scores with Darkforest kernel, but the battery life was better on Doomkernel (this is judging on JokaWild 2.5 rom) so stuck with that.
I am using Doom Kernel oc'd to 1.6ghz on a Stock R800X build, and game performance has improved dramatically over the Stock Kernel. Shadowgun and GTA3 used to be stuttering, laggy and unplayable. Now they are both smooth and enjoyable.
---------- Post added at 07:00 AM ---------- Previous post was at 06:59 AM ----------
abstractbeats said:
What version of Doomkernel do you have? v11 and v13 2013 have a GPU overclock which caused some of our phones to underperform. v13 3013 should be fine for everyone.
Click to expand...
Click to collapse
Good point, I would steer clear of ANY gpu overclocking. It has always had bad effects on my devices. Cpu overclocking is fine and recommended.
What about best Rom for gaming ?
Sent from my R800i using Tapatalk 2 Beta-5
abstractbeats said:
What version of Doomkernel do you have? v11 and v13 2013 have a GPU overclock which caused some of our phones to underperform. v13 3013 should be fine for everyone.
I actually got very slightly higher 3D graphics Antutu scores with Darkforest kernel, but the battery life was better on Doomkernel (this is judging on JokaWild 2.5 rom) so stuck with that.
Click to expand...
Click to collapse
I have got v3013 and still lagging. What should i set as OC and Governor and I/O ?
LordShedy said:
I have got v3013 and still lagging. What should i set as OC and Governor and I/O ?
Click to expand...
Click to collapse
The Rom I'm on (JokaWild 2.5) has boot scripts in \system\etc\init.d\ ...
I/O scheduler is SIO (I don't know what's best here)
CPU max/min on boot I'd modified to 1017600/364800 (SmartassV2). I only overclock as and when I need to.
I bought Reckless Racing 1 and Shadowgun when I was stock ROM + kernel and they never seemed to lag, although I didn't play them that much. Just reinstalled and had a spin of Reckless and it seems fine.
Do you find the homescreens / interface lagging as a whole? I had a problem on Doomkernel to start with where it would boot up at 921MHz max, and lag like crazy. I think it's because the CPU frequency table in Doomkernel is different to stock (eg. 1017600 instead of 1024000). Using OC/UV Beater 1.7 or SetCPU etc, or the boot script I've just mentioned, makes sure it's at the Doomkernel frequencies, and made the problem go away.
This might be someone else with the same issue on the Arc, I never took a logcat unfortunately.
Hi guys, i've been working on a better kernel for our W, but i didnt create a thread for it. Im doing this now:
*** For ICS roms ***
Here is the changelog (all my kernels are compiled with linaro toolchain):
--------------------v1-------------------- STABLE
-added smartassV2 governor
-added interactivex governor
-added lazy governor
-added lulzactive governor
-added lionheart governor
-added ondemandx governor
-added intellidemand governor
-added smartass governor
-added lagfree governor
-added the Stochastic Fair Blue (SFB) network scheduler
-added SIO scheduler
-enabled CFQ scheduler
-enabled BFQ scheduler
-added SLQB memory allocator
-zram support active
-added jrcu
--------------------v2--------------------
-enabled kernel debugger
-added bfs scheduler
-reverted to tiny_RCU
-removed useless governors
--------------------v2.2--------------------
-rewrote overclock support
--------------------v2.3--------------------
-undervolted cpu
-undervolted components (maybe some major battery life improvements)
-minor fixes
--------------------v3.0-------------------- IN TEST
-completely new kernel based on arco and castagnaIT sources.
-undervolted (if someone get crashes, tell me)
-overclocked (up to 2ghz)
-probably better battery life and performance with BFS
-added some new battery friendly governors
-BFS brought some major performance improvements and smoothness (5000+ on antutu)
****** I'm uploading an pre-undervolted version and a stock volted one. ******
****** New v3.0 stock version up to 2GHZ ******
****** Reference voltages attached ******
If you want to tweak BFS scheduler try setting values (1-300) on /proc/sys/kernel/rr_interval
PLEASE GIVE FEEDBACK.
Obs: tell me if bluetooth, gps, fm, wifi and any other component are working fine.
BFS version only this time.
OBS:Im still trying to find a way to make BLN mod work for our phone.
Please give me feedback and suggestions. Thanks
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
terifish said:
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
Click to expand...
Click to collapse
Yea i'm a bit worried about this as well.
I'm using V1 now and it's so great that I'm afraid to upgrade to V2.
Does it improve battery life? For me is the most important thing about a kernel. =)
....
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
forfivo said:
Hi guys, i've been working on a better kernel for our W, but i didnt create a thread for it. Im doing this now:
Here is the changelog (all my kernels are compiled with linaro toolchain):
--------------------v1--------------------
-added smartassV2 governor
-added interactivex governor
-added lazy governor
-added lulzactive governor
-added lionheart governor
-added ondemandx governor
-added intellidemand governor
-added smartass governor
-added lagfree governor
-added the Stochastic Fair Blue (SFB) network scheduler
-added SIO scheduler
-enabled CFQ scheduler
-enabled BFQ scheduler
-added SLQB memory allocator
-zram support active
-added jrcu
--------------------v2--------------------
added minfree tweak (lowmemorykiller)
sdcard readahead tweaked
added vr io scheduler
removed kernel debugger (performance improvement?)
added savagedzen governor
added smoothass governor
added brazillianwax governor
added scary governor
add and enable cleancache and frontswap
included tweaks in kernel
add real video
added 2 way call recording
added bfs scheduler
reverted to tiny_RCU
many other codefixes (check on github)
Click to expand...
Click to collapse
When i lock the screen, it reboots
Is this for Gingerbread or ICS?
Sent from my GT-I8150 using xda app-developers app
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
jinghuanpang said:
When i lock the screen, it reboots
Click to expand...
Click to collapse
yes, yes, yes, i've checked this out, it's true! flashing over v1 w\o wiping anything
exactly the same problem like in my efforts!
please tell me how, when it's fixed..
reverting to v1 and goin to my classes..
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Woohooo... said:
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Click to expand...
Click to collapse
Brother, give him some time. In fact he just uploaded today and it is normal there are bugs.
Flashing V2, but reverting back to V1. About long time to boot I think it because too many governors, and i/o, you should remove few standard governors like powersave, ondemand, interactive (since there is interactiveX and ondemandX) then smartass, because smartassv2 is included, noop, and other standard i/o. Just my silly thought btw sleep of death occured to me, so strange in v1 this is not occured, I think this is because kernel debugger thing and celancache/frontswap so I flash back to v1
Sent from my GT-I8150 using Tapatalk 2
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
kemaro30 said:
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
Click to expand...
Click to collapse
I current use smartassv2 with the sio i/o and its been great in both performance and battery, it also feels smoother as well.
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Are you flashing from v1 or from just the arco kernel?
Also might I suggest trying to flash v1 since its been reported to be more stable than v2 is.
kernel v2 isn't stable for now, I suggest you using v1
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Brian, just flash the zip file. I suggest to have a back up using CWM prior flash using CWM. Once flashed just reboot.
Sent from my GT-I8150 using xda app-developers app
terifish said:
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
Click to expand...
Click to collapse
Yes, but to be sure go to cwm and do a CACHE wipe.
joaocadide said:
I'm using V1 now and it's so great that I'm afraid to upgrade to V2.
Does it improve battery life? For me is the most important thing about a kernel. =)
....
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
Click to expand...
Click to collapse
I'll install whats app and simulate your scenario. Tell me more info about your rom, governor, io scheduler, cpu frequency; wifi, bluetooth, gps status; I'll test it here and post my observations later. Thanks buddy
PolyDroid said:
Is this for Gingerbread or ICS?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I really dont know if it'll work on gingerbread. Wait for more feedback here. I can check this, but im focused on the kernel development now. Thks
jinghuanpang said:
When i lock the screen, it reboots
Click to expand...
Click to collapse
This doesnt happen with me. Can u post more details about your rom, governor,io scheduler, cpu frequency? Was your wifi, bluetooth,gps or any other thing turned on? Were you using any application when it happended? Because i've disabled FSync, and its known to be causing issues. I have to check whats the problem. Thanks
dimaka1256 said:
yes, yes, yes, i've checked this out, it's true! flashing over v1 w\o wiping anything
exactly the same problem like in my efforts!
please tell me how, when it's fixed..
reverting to v1 and goin to my classes..
Click to expand...
Click to collapse
Dimaka , can u post more details about your rom later. I need to know which governor,io scheduler, cpu frequency you were using. And if your wifi, bluetooth,gps or any other thing was turned on. Were you using any application when it happended? Thanks
Woohooo... said:
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Click to expand...
Click to collapse
Just flash v1 temporarily unitl i find out whats happening. Dont need to worry.
hotheabilly said:
Flashing V2, but reverting back to V1. About long time to boot I think it because too many governors, and i/o, you should remove few standard governors like powersave, ondemand, interactive (since there is interactiveX and ondemandX) then smartass, because smartassv2 is included, noop, and other standard i/o. Just my silly thought btw sleep of death occured to me, so strange in v1 this is not occured, I think this is because kernel debugger thing and celancache/frontswap so I flash back to v1
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
, its not my intention to keep all these governor and io schedulers. Just added them test battery and performance. I just need more feedback so i remove the bad ones. I intend to do exactly what you say...Ill look into the problems today. And hotheabilly, please post more details about your rom, governor,io scheduler, cpu frequency. And if you were using wifi, bluetooth,gps or any other thing. Were you using any application when it happened? Thanks
kemaro30 said:
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
Click to expand...
Click to collapse
Some are saying that smartassV2 and lazy with SIO are the best relation battery/performance.
LittleDoggy said:
I current use smartassv2 with the sio i/o and its been great in both performance and battery, it also feels smoother as well.
Click to expand...
Click to collapse
I agree with you. Thanks for the feedback. I intend to make a lightweight kernel, but first i want to implement all requested features and later we start to burn the extra fat...ahahah
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
I recommend it, but i'm not sure if its really necessary. I would do it to be certain. Thks
forfivo said:
I agree with you. Thanks for the feedback. I intend to make a lightweight kernel, but first i want to implement all requested features and later we start to burn the extra fat...ahahah
Click to expand...
Click to collapse
No problem, I really don't mind with its current size as of this moment and it doesn't really feel clunky unless you start having all CPU governors in there then yea...:good:
How do i install this Kernel? Just flash it with CWM?
Hello guys and girls, i just installed the Cyanogen MOD 10 by FXP Team and i was wondering what settings i should use in the "Performance" tab, for Min CPU, MAX CPU, RAM and I/O Scheduler. I just wanna use my phone for daily use and also games from time to time. Any other tweaks or ideeas ?
Thanks!
Smartassv2 sio 249min 1200max
Sent from my R800i using xda app-developers app
K4maD3va said:
Hello guys and girls, i just installed the Cyanogen MOD 10 by FXP Team and i was wondering what settings i should use in the "Performance" tab, for Min CPU, MAX CPU, RAM and I/O Scheduler. I just wanna use my phone for daily use and also games from time to time. Any other tweaks or ideeas ?
Thanks!
Click to expand...
Click to collapse
For daily use I recommended same settings like masteril said. For gaming use 1600 Mhz/249 Mhz, performance, deadline.
for daily use, if your using turbo kernel, i'd say for the governor = intellidemand and for the I/O = sio; max clock 1.018 GHz and min clock 184 MHz. I got amazing battery time with those settings just listening to music and playing online casual games and emulators, but sadly Jelly Bean and emulators don't get along very well because most of the "oid" emulators don't work properly on Jelly Bean (not just CM10, PACMAN and Paranoid also) and when ever I touched the touchpads the games stared to lag. So I went back to Gingerbread for gaming, best battery and smoothness