Develop Bugs

KISS-Kernel

excuse me; have question about this kernel; i couldn't post in the original thread;
by setting the min clock speed to 768MHZ & the max to 1407MHZ, How much voltage does it spend? by setting the min to 245MHZ & max to 1024MHZ how much? i overclocked to 1407MHZ , i saw more smoothness and speed; but i felt that its consuming more power!
is overclocking harmful to CPU? ( always overclocking )
Rom: MY One V RC4.0 FX
PrimoU GSM
Kernel: Latest Kiss Kernel

Hi
Political correct answer:
Of course OC "can" harm your device - like all OC´ing
Realistic answer:
Most One V devices can handle OCing up to 1.5 without problems
but since this may be specific to chip manifacturing there is no
guarantee that it is. Therefore before using any OC you should
test it very carefully.
And also - Of course running the chip at higher frequencies needs
more power. Simply physics .)
In "normal" daily use the difference is not big because the cpu will
not run at high frequencies most of the time. If you do things
like "heavy" gaming this is of course forcing the cpu to run faster.
To reduce the "effect" a little bit there is a kernel feature called
Undervolting (UV) with that you can reduce the voltage for
specific frequencies. Like OC this is device specific. So some
devices can run stable with more reduced voltage then others
BTW: why to you set the min frequency to 768?
This will limit that the frequency cannot go lower then that if the
device is idle. Running at 245 needs of course less power then 768
max

Thanks for the nice info, well, i heard that some users said that the best frequency for " My One V" rom:
Minimum: 768MHZ
MAX: 1407
I'm using "Set CPU" to OC
So setting the min frequency to 245MHZ will save more power, right?
Sent from my HTC One V using xda app-developers app

Satohiroshi said:
So setting the min frequency to 245MHZ will save more power, right?
Click to expand...
Click to collapse
Yes - especially for the time before the device can go into
"deep sleep" when beeing idle.
The only "disadvantage" is that depending on the govener that you use
there might be a small lag before the frequency scales up
Actually it depends if you notice it at all
If you use govener ondemand it should be no problem
if you use e.g. smartassV2 you might consider thinking about
using some tunables that will reduce that behaviour.
max

Thanks, yeah, i meant for normal activities, like checking Facebook,mail, watching movies ... So ondemand mode would be better
Sent from my HTC One V using xda app-developers app

maxwen said:
Yes - especially for the time before the device can go into
"deep sleep" when beeing idle.
The only "disadvantage" is that depending on the govener that you use
there might be a small lag before the frequency scales up
Actually it depends if you notice it at all
If you use govener ondemand it should be no problem
if you use e.g. smartassV2 you might consider thinking about
using some tunables that will reduce that behaviour.
max
Click to expand...
Click to collapse
What is your recommend governor to integrate with your Titanium-KISS kernel and what is your favourite I/O Scheduler tweaks, for daily use & heavy gaming?
I'm using smartassV2 & i set my I/O Scheduler to deadline until now, because it's peoples favourite
Should i change it to ondemmand to gain a better performance?

Hi
Actually there is already a lot of information about your question
in the KISS kernel thread.
Especially about how to tweak smartassV2 based on "profiles"
max

maxwen said:
Hi
Actually there is already a lot of information about your question
in the KISS kernel thread.
Especially about how to tweak smartassV2 based on "profiles"
max
Click to expand...
Click to collapse
uh, okay...i'll re-read the info once again :good:

[Q] What app do you overclock with?

I am playing around with some other OC/UV apps other than SetCPU and was wondering, for those who do OC /UV /UC, what app do you prefer?
ive tried out (so far)
SetCPU
Voltage Control Extreme
AnTuTu CPU Master Pro
CPU Control Pro
ROM Toolbox Pro
Sent via G2x on temasek b135.2 w/faux kernel v54

justjackyl said:
I am playing around with some other OC/UV apps other than SetCPU and was wondering, for those who do OC /UV /UC, what app do you prefer?
ive tried out (so far)
SetCPU
Voltage Control Extreme
AnTuTu CPU Master Pro
CPU Control Pro
ROM Toolbox Pro
Sent via G2x on temasek b135.2 w/faux kernel v54
Click to expand...
Click to collapse
I don't UV so I just use the ROM settings and leave it alone.
Tapatalked from my Thrive - Kuroikaze B13x

I use set CPU for my over/under clocking and I usually don't under volt. Most should work fine
Sent from my Nexus S 4G using xda app-developers app

pio_masaki said:
I don't UV so I just use the ROM settings and leave it alone.
Tapatalked from my Thrive - Kuroikaze B13x
Click to expand...
Click to collapse
Is there a way to make a shortcut to the performance settings, under settings?
i tried to make an action shortcut but haven't been able to. I myself don't play with UV often. If i could create a faster way to access the performance settings i would prob use it.
Sent via G2x on temasek b135.2 w/faux kernel v54

justjackyl said:
Is there a way to make a shortcut to the performance settings, under settings?
i tried to make an action shortcut but haven't been able to. I myself don't play with UV often. If i could create a faster way to access the performance settings i would prob use it.
Sent via G2x on temasek b135.2 w/faux kernel v54
Click to expand...
Click to collapse
Dunno, never tried. Rarely need to adjust the settings, ROM runs well enough at 800mhz lol
Tapatalked from my Thrive - Kuroikaze B13x

pio_masaki said:
Dunno, never tried. Rarely need to adjust the settings, ROM runs well enough at 800mhz lol
Tapatalked from my Thrive - Kuroikaze B13x
Click to expand...
Click to collapse
Im just trying to find best and quickest way to OC when gaming than UC for normal use. Bleh...finding triggered profiles are not the answer. Lol
Sent via G2x on temasek b135.2 w/faux kernel v54

I've had my A100 for a few weeks, up to now I've used AnTuTu CPU Master Pro to overclock and undervolt, hasn't failed me yet, originally used my ROMs built in settings but that began to be a bit tedious, constantly having to dig through my settings for it got a bit old, a convenient shortcut to the performance settings would be just dandy.

Nozomi135 said:
I've had my A100 for a few weeks, up to now I've used AnTuTu CPU Master Pro to overclock and undervolt, hasn't failed me yet, originally used my ROMs built in settings but that began to be a bit tedious, constantly having to dig through my settings for it got a bit old, a convenient shortcut to the performance settings would be just dandy.
Click to expand...
Click to collapse
I know! I have no idea how to make a shortcut but looking into it.
Sent via G2x on temasek b135.2 w/faux kernel v54

The only thing i find built in ROM performance settings lack is voltage control, generally liking my overclock/undervolt, performance is nice, generally pretty stable up to now.
Sent from my A100 (CM10 Unofficial Build 20120902, Godmachine V2.0 Kernel) via XDA Premium App

I found overclocking the GPU helps a lot more. There is a kernel for jellybean rom (a.k.a. CM10) and may work for ICS and the GPU overclock helps a lot. Use built in CM over clocker @ 1.5 GHz and GPU @ <400 MHz or whatever speed the kernel builder put it at. The original GPU clock speed was around 350 MHz or something so that is a substantial boost in terms of speed. Other then some heating when playing games no problems and perfectly stable. Battery doesn't seem to drop a bit maybe 1 or 2% faster.

RoboWarriorSr said:
I found overclocking the GPU helps a lot more. There is a kernel for jellybean rom (a.k.a. CM10) and may work for ICS and the GPU overclock helps a lot. Use built in CM over clocker @ 1.5 GHz and GPU @ <400 MHz or whatever speed the kernel builder put it at. The original GPU clock speed was around 350 MHz or something so that is a substantial boost in terms of speed. Other then some heating when playing games no problems and perfectly stable. Battery doesn't seem to drop a bit maybe 1 or 2% faster.
Click to expand...
Click to collapse
Wanna get real crazy push it to 430 GPU and 1.7 cpu. Quite an interesting ride. The kernels are all compatible with ICS or jb, just don't get the ui acceleration in ICS.
Sent from my Galaxy Nexus using Tapatalk 2

I think those are pulled, he didn't want dark night playing his games on performance at 1.7..... lol
sent from my Banana phone S 4G

das_webos_transformer said:
I think those are pulled, he didn't want dark night playing his games on performance at 1.7..... lol
sent from my Banana phone S 4G
Click to expand...
Click to collapse
He did one that high? I built that one myself lol.
Good call pulling them down if he did though, not all devices can handle it. The old board did, the replacement didn't take it so well.
Sent from my Galaxy Nexus using Tapatalk 2

hello, i use setcpu pro. set on boot 1.0ghz. uv is on test. i read many pages, the result is all -100 the last three cpu steps -75 -50 -25. on hd gaming (wild blood, nfs undercover...) set 1,2ghz. 800mhz is more better for the battery and all running smooth. (many times with livewallpaper). for music when i going to the city ... my system: a101 - flexreaper rev2, ezterry kernel (ezT20), apex launcher.
setcpu can not ov the GPU. which programm can do this?
sorry for this bad english, i am from germany, i can read fine, but ...

mcmaster81 said:
hello, i use setcpu pro. set on boot 1.0ghz. uv is on test. i read many pages, the result is all -100 the last three cpu steps -75 -50 -25. on hd gaming (wild blood, nfs undercover...) set 1,2ghz. 800mhz is more better for the battery and all running smooth. (many times with livewallpaper). for music when i going to the city ... my system: a101 - flexreaper rev2, ezterry kernel (ezT20), apex launcher.
setcpu can not ov the GPU. which programm can do this?
sorry for this bad english, i am from germany, i can read fine, but ...
Click to expand...
Click to collapse
Your English is not too bad my new friend. Thank you for your feedback. I like to find out what programs and settings users are using on their A100s. Helps me find different options to try on my tablet.
I love SetCPU and have PRO version as well, but it was causing bad SOD problems on my tablet. I am now currently testing others.
Iconia A100 CM10 PRIVATE BUILD, TabletUI, Updated to 11/03/12 Source; godmachine v2.0 kernel

mcmaster81 said:
setcpu can not ov the GPU. which programm can do this?
Click to expand...
Click to collapse
No program can set GPU speeds, its coded then built.
Sent from my Galaxy Nexus using Tapatalk 2

I use system tuner. Works pretty good and has lots of other useful tweaks in it

best config for nolag and game arc s?

what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other

TiagoRigueto said:
what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other
Click to expand...
Click to collapse
- Performance
- Noop
- highest frequency possible
Sent from Xperia Arc S

use lupus kernel for performance..

If you're wanting the best possible kernel & rom for gaming then use one of the gingerbread roms.

but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop

TiagoRigueto said:
but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop
Click to expand...
Click to collapse
just buy another battery

[Q] SE Xperia Play & CyanogenMOD 10

Hello guys and girls, i just installed the Cyanogen MOD 10 by FXP Team and i was wondering what settings i should use in the "Performance" tab, for Min CPU, MAX CPU, RAM and I/O Scheduler. I just wanna use my phone for daily use and also games from time to time. Any other tweaks or ideeas ?
Thanks!

Smartassv2 sio 249min 1200max
Sent from my R800i using xda app-developers app

K4maD3va said:
Hello guys and girls, i just installed the Cyanogen MOD 10 by FXP Team and i was wondering what settings i should use in the "Performance" tab, for Min CPU, MAX CPU, RAM and I/O Scheduler. I just wanna use my phone for daily use and also games from time to time. Any other tweaks or ideeas ?
Thanks!
Click to expand...
Click to collapse
For daily use I recommended same settings like masteril said. For gaming use 1600 Mhz/249 Mhz, performance, deadline.

for daily use, if your using turbo kernel, i'd say for the governor = intellidemand and for the I/O = sio; max clock 1.018 GHz and min clock 184 MHz. I got amazing battery time with those settings just listening to music and playing online casual games and emulators, but sadly Jelly Bean and emulators don't get along very well because most of the "oid" emulators don't work properly on Jelly Bean (not just CM10, PACMAN and Paranoid also) and when ever I touched the touchpads the games stared to lag. So I went back to Gingerbread for gaming, best battery and smoothness

Share Your Best Governor & I/O Combination

Hi guys,
Feel free to share your best governor & i/o combination that you use,
Add the details about your Governor & I/O setting, and the battery life
For me,
I usually use:
Governor: Ondemand
I/O Scheduler: ROW
CPU Freq: min 300, max 1,2 ghz (underclocked)
Greenify
Switch to ART
Currently use Mokee Unofficial 20141013
Single Sim only
No mobile data, just Wi-Fi
I got 5h 56m Screen On Time (on standart usage)
Feel free to share!

I just use default setting on stock rom miui v45
ondemand
1.53ghz

i wish they have more.
currently on onDeman + cfq

delang said:
i wish they have more.
currently on onDeman + cfq
Click to expand...
Click to collapse
Waiting for kernel source to release...for custom kernel

Levered said:
I just use default setting on stock rom miui v45
ondemand
1.53ghz
Click to expand...
Click to collapse
How is the battery life?
Is it still overheated?

Miui v43, just rooted and underclocked
Ondemand + cfq
Max- 1.4ghz
Min- 300
No heating like v45, just little heats up but it is acceptable, no lags while playing 1080p vids and playing games like real racing 3
Screen on time 4 h 10 min....

998-300..
On demand -cFQ
My question is "set on boot" to be selected??

manudduke said:
998-300..
On demand -cFQ
My question is "set on boot" to be selected??
Click to expand...
Click to collapse
Yes, you should check the "set on boot"

wat does it do when "set on boot " is selected

manudduke said:
wat does it do when "set on boot " is selected
Click to expand...
Click to collapse
The setup will remain even after you reboot the phone !

MIUI 7 stable
God's kernel
Interactive
Deadline

Cm 11 r29
Xcelerate kernel
Ondemand
Bfq. Max-1305. Min-300
Battery backup 4.5hr screen on time
Heating is under control and performance is best.