Related
I was updating to latest version of cyanogenmod through OTA and after that my phones battery just died I mean it showed 1 percent and even though I charged it, it still was running off the battery and no matter how long I charged it it just didn't boot up
I can load download mode\ recovery but I installed through odin a stock rom and still it boots up and says I have no battery and turns off even if it connected to the original samsung charger, and I can't just turn it on like with the power button I need to load recovery and then reboot.
please help me i'm really frustrated
borrow a battery and test it
Blackwolf10 said:
borrow a battery and test it
Click to expand...
Click to collapse
Do you think that a battery can die just like that with no reason?
I think its a software problem and not a technical one.
does anyone have another solution?
You have good reasons to believe it's a software thing, yet you also don't.
Focus on what you are able to do at the moment.
Since your phone is just a brick now, no matter what your suspicions are, you need to test it with another battery and eliminate possibilities.
Either the rom you flashed bricked your phone, or the battery just decided to call it a life. Either way, you need a battery to test whether it did actually die, or to determine whether it's a true software issue.
Beamed from Jupiter on my Galaxy Note II
GuyDroid said:
Do you think that a battery can die just like that with no reason?
I think its a software problem and not a technical one.
does anyone have another solution?
Click to expand...
Click to collapse
Yup it could happen(at least to me). My battery can last 10hours then suddenly when I woke up in a morning my phone dead. Use charger while power on only last to samsung screen. Thought it's a softbrick so tried to reflash but not working. Luckily I have a friend with the same phone so borrow his battery
so I checked with my friends battery and it still seem to have the same problem.
so does anyone have another solution maybe?
up
GuyDroid said:
up
Click to expand...
Click to collapse
Have you tried to clear Data/Cache? AFAIK Odin does not clear them. You can try to reset all partitions with Odin using PIT file and then without rebooting flash stock rom. Hope that helps.
mat9v said:
Have you tried to clear Data/Cache? AFAIK Odin does not clear them. You can try to reset all partitions with Odin using PIT file and then without rebooting flash stock rom. Hope that helps.
Click to expand...
Click to collapse
Where can I get this PIT file?
GuyDroid said:
Where can I get this PIT file?
Click to expand...
Click to collapse
In post #4 in this thread.
I tried it and it didn't work
any other solution someone?
GuyDroid said:
I tried it and it didn't work
any other solution someone?
Click to expand...
Click to collapse
You selected a pit file and checked re-partition on the left side?
Thank you all.
After all the battery was the issue.
Can you guys recommend a good ebay seller for OEM battery's?
This might not work for you as it did not work for me but it is the only way I have been able to pass the low battery message so it might work for some. I get a connection problem after step 3
Step 1.
Download tool and LG drivers (if you don't have them) from here and here and install them normally
Step 2.
Remove battery and note down your device model and serial number. Boot phone in to download mode by switching phone off or pulling battery if soft bricked, then hold down both of the volume keys and plug in the USB data cable
Step 3.
Run LG Mobile Tool and wait for the software to tell you it recognises the handset as either being the latest software or a new update is available. Unplug the handset but keep it in download mode then in LG Mobile Tools click on options then update recovery. It will now prompt you to enter your handset details, fill out the top 2 boxes and click ok. You will soon be prompted by a message asking you to plug your handset in, plug it in then press retry. Wait EXACTLY 5 seconds (count 1 Mississippi, 2 Mississippi, 3 Mississippi, 4 Mississippi, 5 Mississippi) then unplug the phone as quickly as possible! Very important, it might take a few tries to get it so just alter the speed at which you are saying Mississippi lol!. If you get the same error message about battery too low then you have failed and need to try it again. Once you have succeeded you can do either of the 2 things below:
3a. Plug phone back in immediately and wait for the file to download and flash (recommended) (I am currently trying this and will report back as soon as I can)
3b. If you are soft bricked and scared you have limited battery then don't plug it back in, pull your battery out and let the program run and it will do everything including download the required software for flashing. When the software is almost completely downloaded, boot back in to download mode and let the downloaded software flash to your phone. (might have an error at software installation this method. I couldn't get it to work I think due to the phone being disconnected for so long.)
Step 4.
MAKE SURE YOU DO A FACTORY RESET STRAIGHT AFTER THE SOFTWARE HAS INSTALLED
Step 5. (Optional)
Download the older version of FreeGee from here if you are still a bit unsure if the latest version will soft brick your handset again.
I have managed to use LG Flash Tools now, even after being affected. I would not advise trying this though, as it was an accident for me. I had the back cover off while flashing a custom rom with CWM. After the rom file was installed, I rebooted my phone from CWM. As the phone was rebooting (was on the rom boot animation) the battery fell out. After I put the battery back in the phone would load to the rom boot animation, but it would freeze on this screen and then reboot and do the same thing over and over (bootloop to animation) - I then tried to factory reset and flash the rom again, with the same thing happening again) - I then went in to restore my phone using a backup through CWM. After the restoration, then phone would still hang at boot animation and then bootloop. I retried restoring and flashing multiple roms and re root the phone with a saved zip file on my phone. None of this was working. I decided to try to use LG Flast Tools again, only this time it actually passed the low battery warning. The funny thing is, I have tried thousands of times even at 100% battery level and lower (when there was nothing wrong with my phone at all) and it has never worked. This time it did (even though I had 66% battery) and still works now, as I just tried it again.
I've tried this method but unfortunately, the update stoped..
i passed through step 3a but when installing the software, around 80%, the lg mobile support tool suddenly disappear.
i'm trying it again for the second time, i'll update after my attempt.
thanks.
reymartsantos11 said:
I've tried this method but unfortunately, the update stoped..
i passed through step 3a but when installing the software, around 80%, the lg mobile support tool suddenly disappear.
i'm trying it again for the second time, i'll update after my attempt.
thanks.
Click to expand...
Click to collapse
- It's so frustrating that it gets so close, I am going to try 3a now and see how I go. There must be a way
3a also didn't work for me oh well, back to the drawing board
uppon2 said:
- It's so frustrating that it gets so close, I am going to try 3a now and see how I go. There must be a way
Click to expand...
Click to collapse
tried it for the thrid time, still no luck. i'll wait for your update.. thanks
Same here..so damn frustrating..
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 10:59 AM ---------- Previous post was at 10:58 AM ----------
Unplugging and connecting when asks for retry helps in bypassing the battery error.still.its just a visual gimmick.
Sent from my GT-I9500 using xda app-developers app
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I might give that a shot.
HONESTLY WHY! I am starting to get so frustrated that nobody can figure this out! Surely there is somebody out there that can someone reverse the damage that FreeGee caused by way of ADB commands? I just wish I knew what the hell I was looking for
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
vnsriniwas said:
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
What exactly did they do? Did you see any of the software? It's not that easy for me as this phone was never released in my country.
uppon2 said:
What exactly did they do? Did you see any of the software? It's not that easy for me as this phone was never released in my country.
Click to expand...
Click to collapse
I could not see what they did. But I am damn sure he didn't do anything like using button combination to get into recovery or download mode etc. I saw him remove the battery n then reinstate then just plugged in the USB cable!
Sent from my LG-E988 using XDA Premium HD app
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I deal with this situation 3 time...last time little scary with only boot to cwm ( fix with flash twrp hack by madmack and install rom )...never get same sollution to by pass low bat warning...
I think we just have to uninstall and reinstall all LG driver..restart..and keep trying with 100% batt..
May be LG decide flash or not when we connect via Lg mobile tool via internet..
Because once i have succed flash with only 20 % battery...last time i get low batt warning with 60% batt...
Once you get low batt warning it keep rejecting flash even with 100% battery..
Lol never give up trying is best sollution
Sent from my LG-E980 using xda app-developers app
Isamu_Dyson said:
I got in such situation twice... bricked device and getting battery level error (3) even when i had my battery at 100%. Found out after several flash attempts that this problem was solved by flashing the oldest official kdz i could find (v10A). :silly:
Click to expand...
Click to collapse
I think we have a hint here!
This morning when service centre guys flashed new ROM I got v10a!!
The moment I reached home I got a notification saying update available. Then. I got v10e !
Sent from my LG-E988 using XDA Premium HD app
vnsriniwas said:
I think we have a hint here!
This morning when service centre guys flashed new ROM I got v10a!!
The moment I reached home I got a notification saying update available. Then. I got v10e !
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
maybe yes ... maybe not ... since my last flash failed 10a and succeeded with 10e firmware...
Maybe different way to flash...
still a mystery
vnsriniwas said:
OK guys.. After exhausting all known tricks but failure I just walked into LG service centre andgot stock ROM installed. It took just ten minute for them to install.
I just though given an opportunity, I will steal their laptop n take it home..hahhha..
Anyway as I of now I am jut **** scared to o anything with the phone. I just rooted it and playing around with DPI settings using closed framework.
Sent from my LG-E988 using XDA Premium HD app
Click to expand...
Click to collapse
sorry for my noob question.
you just walked into LG service centre? they didn't question you about how your phone got into that situation?
i'm afraid that lg might ignore my phone because i rooted and attempt to disable the scurity through freegee..
They have asked me. I just said I was trying to do factory reset n it got struck. But I am not sure if he completely beloved me. It all boils down to how friendly that guy in the counter is. After all ,for them, its just a 10 main job. No parts or labour involved. Just pushing some files.
So just go ahead n try. My phone is also rooted n flashed freegee. But I got the service.
Sent from my LG-E988 using XDA Premium HD app
Worked for me
Waited 5 secs unpluged, LG Support tool shot up to 100% and the download started! Thanks man pro tip
--->Droid DNA FTW<------
Hi guys,
I'm facing the same problem here but with a G Pad. Can't pget past the low battery error.
I figured a way to make the mobile tool download the files but when it comes to flashing it I get the same error again.
How did you flash the file after downloading it?
Any help will be really appreciated.
Allah5580 said:
Waited 5 secs unpluged, LG Support tool shot up to 100% and the download started! Thanks man pro tip
--->Droid DNA FTW<------
Click to expand...
Click to collapse
Bam ... i got it! :laugh:
For all with the low battery error, here is my solution (on Win8 machine):
1. Flashed E988 V5 rom with cwm
I think its editional, because i got low battery error error after i tried to flashed stock rom.
2. Flashed stock at&t rom V10g
3. Flashed E980H Panama ROM V10a
And it works, i dont get low battery error, even with ~65% battery... Maybe a try for all with same problem? :fingers-crossed:
elvitas said:
Bam ... i got it! :laugh:
For all with the low battery error, here is my solution (on Win8 machine):
1. Flashed E988 V5 rom with cwm
I think its editional, because i got low battery error error after i tried to flashed stock rom.
2. Flashed stock at&t rom V10g
3. Flashed E980H Panama ROM V10a
And it works, i dont get low battery error, even with ~65% battery... Maybe a try for all with same problem? :fingers-crossed:
Click to expand...
Click to collapse
how can i flash v5 with cwm? how can i boot to cwm?
Hello all- I managed to completely screw up my F240S, can not get into recovery and have tried every way for 2 days now.
My main issue is that I have been trying to flash the F240S KDZ with the LG update tool and all goes well until about 20-30% into the flash process and I get a message saying "Can not continue due to low battery level, please charge fully and retry" but I am fully charged. Very frustrating.
Does anyone know anything I can do ?
I have been toying around with Android mobiles for a few years now, rooting, custom ROMs, etc.. but this is the very first time I believe I may have completely bricked my mobile, very disappointing.
Cheers for any help !! LL13-
lamplighter13 said:
Hello all- I managed to completely screw up my F240S, can not get into recovery and have tried every way for 2 days now.
My main issue is that I have been trying to flash the F240S KDZ with the LG update tool and all goes well until about 20-30% into the flash process and I get a message saying "Can not continue due to low battery level, please charge fully and retry" but I am fully charged. Very frustrating.
Does anyone know anything I can do ?
I have been toying around with Android mobiles for a few years now, rooting, custom ROMs, etc.. but this is the very first time I believe I may have completely bricked my mobile, very disappointing.
Cheers for any help !! LL13-
Click to expand...
Click to collapse
If you are trying it in Diag mode then switch to emergency mode. That might help.
Poclypse901 said:
If you are trying it in Diag mode then switch to emergency mode. That might help.
Click to expand...
Click to collapse
Cheers for that Poc... but have tried every possible combination and no luck. I actually bought it to a mobile repair guy, can't believe I had to do it but just want it working at this point. Fingers crossed !!!
Cheers, LL13-
put away your battery and do the same flashing without battery...:good:
This Battery low problem is really annoying and has no real reason........i read somewhere that you should use a downloader to download a kdz otherwise it will give error.............it worked once and i flashed successfully but couldn't repeat it....so more luck than logic
an alternate solution is to flash TOT and DLL files using LGPST tool......you may have to search Chinese forums for TOT and DLL files for your specific model. Some Chinese forums below...use chrome for auto tranlsate
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1256&filter=typeid&typeid=8314
http://www.sonyue.com/bbs/forum.php?mod=forumdisplay&fid=1615
fortunately i could get into my recovery so i flashed a ROM via sideload and save myself
best of luck
Are you on a Windows 8 computer? I read that you have to use windows 7. For some reason W8 gives the low battery issue.
on windows 7........battery issue still present
Thank you for that information guys. I actually brought the phone to a mobile repair place and as of a week now he is completely puzzled, can not fix it. I am away at the moment so will see him on Monday and hopefully he gets it going. I will try the other methods as far as the battery issue goes, I also read about the .TOT and .DLL files but it looked very complicated. I may just have to get into it though.
lkiizm. are you saying that the battery does not have to be in the phone when you are flashing it ?
Cheers, LL13-
This mobile appears to be worse than bricked. The repair shop had never seen anything like it, they had to give up on it.
I can not use the LG flash tool and .KDZ file as I get the low battery error. I can not, repeat NOT get into any recovery at all, I have tried every method.
The phone is stuck in some half baked mode where some things work and some do not, every time I turn the phone off it goes back to the start and anything put on it is erased. Factory reset is useless.
I'm only a little while from simply tossing this mobile in the trash. Does anyone have any ideas on how to salvage this ?
Cheers, LL13-
lamplighter13 said:
This mobile appears to be worse than bricked. The repair shop had never seen anything like it, they had to give up on it.
I can not use the LG flash tool and .KDZ file as I get the low battery error. I can not, repeat NOT get into any recovery at all, I have tried every method.
The phone is stuck in some half baked mode where some things work and some do not, every time I turn the phone off it goes back to the start and anything put on it is erased. Factory reset is useless.
I'm only a little while from simply tossing this mobile in the trash. Does anyone have any ideas on how to salvage this ?
Cheers, LL13-
Click to expand...
Click to collapse
Tot + DLL should save you... That tool does not have the low battery error.. where are you getting stuck exactly in the boot process? If the mobile turns on, it can be recovered no matter what
Sent from my LG-E980 using Tapatalk
Hi vive... I been real upset over this but may be on the verge of a breakthrough as I just tried the mobile support tool for the hell of it and when my "low battery" error would normally pop up I just tried unplugging and plugging in rapidly and it made it through and now seems to be in the process of a proper upgrade.
I'm on 42% now and it's been going for about 19 minutes, fingers crossed this could be it.
I have been looking at the TOT and DLL way, a bit tricky for a guy like me but I may have to suck it up and just dig in.
The real killer is the large download size, I may have to go to an internet cafe for that.
I will report back !!
Cheers, LL13- :angel:
I have learned my lesson this time, no more dodgy Chinese ROMs for me !!
somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks
shirish893 said:
somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks
Click to expand...
Click to collapse
Try flashing the rom less than 1 GB using the KDZ_FW_UPD.exe with CS_Emergancy mode it should work if your phone have enough battery power to keep it on in download mode for 10 minutes or so, if not then try through LGNPST using tot file. Or check if it charges in the custom recovery.
Correct me if I am wrong
hackenggr said:
Try flashing the rom less than 1 GB using the KDZ_FW_UPD.exe with CS_Emergancy mode it should work if your phone have enough battery power to keep it on in download mode for 10 minutes or so, if not then try through LGNPST using tot file. Or check if it charges in the custom recovery.
Correct me if I am wrong
Click to expand...
Click to collapse
i cant neither go to recovery nor bootloader..
and i tired using kdz updater.. it shows to charge ur battery
see the pictures below
shirish893 said:
i cant neither go to recovery nor bootloader..
and i tired using kdz updater.. it shows to charge ur battery
see the pictures below
Click to expand...
Click to collapse
Turn off your phone and put it in download mode by pressing and holding ‘Volume Up’ + ‘Volume Down’ and inserting USB and use the software to flash KDZ that I attached the screetshot, KDZ_FW_UPD.exe, this one can't flash the KDZ file bigger than 1 GB so if your KDZ is more than ! GB in size then download one that is less then 1 GB recover your phone charge it then flash your desired one. You are using the R & D Tool it always check the battery level and not allow you to flash if battery is less than 50%.
Note: If you have the mako bootloader install this tool might not flash the kdz (It never did for me) to come back to full stock you will have to use the LGNPST
hackenggr said:
Turn off your phone and put it in download mode by pressing and holding ‘Volume Up’ + ‘Volume Down’ and inserting USB and use the software to flash KDZ that I attached the screetshot, KDZ_FW_UPD.exe, this one can't flash the KDZ file bigger than 1 GB so if your KDZ is more than ! GB in size then download one that is less then 1 GB recover your phone charge it then flash your desired one. You are using the R & D Tool it always check the battery level and not allow you to flash if battery is less than 50%.
Note: If you have the mako bootloader install this tool might not flash the kdz (It never did for me) to come back to full stock you will have to use the LGNPST
Click to expand...
Click to collapse
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?
shirish893 said:
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?
Click to expand...
Click to collapse
Have you tried using teenybin? http://forum.xda-developers.com/showthread.php?t=2249500
shirish893 said:
there is no kdz less than 1gb :crying: .. all are above 1gb...
and as i said above i cant charge.....
and ya i have a mako bootloader
what shall i do?
Click to expand...
Click to collapse
grunch21 said:
Have you tried using teenybin? http://forum.xda-developers.com/showthread.php?t=2249500
Click to expand...
Click to collapse
Yeah try the teenybin to recover detailed instructions are on the thread. Thanks grunch21
I once seen the more easy understanding guide to setup the LGNPST software that is instructed to use in the above thread if I found it again I will post the link here for your convenience.
EDIT:
A little simple step by step instructions to use the LGNPST here How to use LGNPST on Windows 8
shirish893 said:
somehow by mistake... the above problem arises...
I got the way to solve it by flashing kdz file.. but the problem is.. while flashing, it says to charge ur phone.
Now the problem is, whenever i charge it, it starts and shows "secure boot error"
How do i charge my phone? Help guys
Thanks
Click to expand...
Click to collapse
If it's of any help, I had exactly the same problem just a few days ago... Read from this post further down, there were some suggestions from folks, and the final solution to my issue. Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
As mentioned, TeenyBin and LGNPST might be another solution, but I have no first-hand experience with it, so I can't comment...
Oh, and BTW, you are saying you "tried to use KDZ Updater", but your screenshot shows the LG Mobile Support Tool -- that's a different application, and a different process. Look at a screenshot by @hackenggr a couple of posts above -- that's KDZ Updater.
kt-Froggy said:
If it's of any help, I had exactly the same problem just a few days ago... Read from this post further down, there were some suggestions from folks, and the final solution to my issue. Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
As mentioned, TeenyBin and LGNPST might be another solution, but I have no first-hand experience with it, so I can't comment...
Oh, and BTW, you are saying you "tried to use KDZ Updater", but your screenshot shows the LG Mobile Support Tool -- that's a different application, and a different process. Look at a screenshot by @hackenggr a couple of posts above -- that's KDZ Updater.
Click to expand...
Click to collapse
dude its and r and d tool... anyway..wat u did to solve this problem?? can u tell me?? I,cant get wat u talking about from ur given link
shirish893 said:
wat u did to solve this problem?? can u tell me?? I,cant get wat u talking about from ur given link
Click to expand...
Click to collapse
Hate to quote my own previous post, but here:
Long story short, KDZ Updater can work with the dead battery, if you manage to find a KDZ that can be flashed with it. I found a 1.17GB KDZ that I was able to flash (any others, just slightly larger, would give me an extract error), and then just took it from there.
Click to expand...
Click to collapse
That's exactly what I did. Flashed a KDZ (1.17GB in size, the smallest I could find) with a KDZ Updater. Low battery didn't matter.
kt-Froggy said:
Hate to quote my own previous post, but here:
That's exactly what I did. Flashed a KDZ (1.17GB in size, the smallest I could find) with a KDZ Updater. Low battery didn't matter.
Click to expand...
Click to collapse
but i am getting an extraction error... what should i do?
shirish893 said:
but i am getting an extraction error... what should i do?
Click to expand...
Click to collapse
Then I don't know... I told you what fixed the problem for me -- finding the smallest KDZ that could be flashed. If it doesn't work in your case, look into something else, like TeenyBin.
kt-Froggy said:
Then I don't know... I told you what fixed the problem for me -- finding the smallest KDZ that could be flashed. If it doesn't work in your case, look into something else, like TeenyBin.
Click to expand...
Click to collapse
okay,, im trying teenybin
Thanx a lot guys... teenybin solved my problem :good:
wait a sec guys, i thought it was solved.. now see this problem...what shall i do? :crying:
shirish893 said:
wait a sec guys, i thought it was solved.. now see this problem...what shall i do? :crying:
Click to expand...
Click to collapse
I think because you decive is converted with mako bootloader LG software not found the LG phone so they stop.
Use the LGNPST to flash the E975 tot file same way you did with teenybin just rename the .tot to .bin and you will be on the LG stock and software will work fine to your desire KDZ
I Need help fixing my g3, been Trying for hours to no avail. i need some guidance i am completely lost.
GTFODeathknight said:
I Need help fixing my g3, been Trying for hours to no avail. i need some guidance i am completely lost.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
GTFODeathknight said:
I Need help fixing my g3, been Trying for hours to no avail. i need some guidance i am completely lost.
Click to expand...
Click to collapse
First tell us what the issue is?
Is it a soft brick? Just flash your TOT file by the LG flash tool and your good to go. But first you should give us some more information
_SDroid said:
First tell us what the issue is?
Is it a soft brick? Just flash your TOT file by the LG flash tool and your good to go. But first you should give us some more information
Click to expand...
Click to collapse
(sorry for the reply time was camping) i just woke up one morning and my phone just wouldnt boot up, i cant even get to the recovery mode nor download mode. when it starts powering on i get
SECURE BOOTING ERROR
BOOT CERTIFICATION VERIFYAlong with the LEDs blinking
GTFODeathknight said:
(sorry for the reply time was camping) i just woke up one morning and my phone just wouldnt boot up, i cant even get to the recovery mode nor download mode. when it starts powering on i get
SECURE BOOTING ERROR
BOOT CERTIFICATION VERIFYAlong with the LEDs blinking
Click to expand...
Click to collapse
If you can't access the download mode you've hard bricked your phone some way. You should send it back and let it repair by someone
If you're out of warranty and feel up to taking your phone apart you could try this: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
If you still have warranty, send it in.