Can I flash MIUI rom on B118CN?
kjgausvik said:
Can I flash MIUI rom on B118CN?
Click to expand...
Click to collapse
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
taaeem said:
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Thanks! it worked fine
Related
is the new 1% battery mod. this zip file via cwm recovery flash is vrt thema
Does this works with 10.2 from maclaw?
Work for my.
Thanks!
How did you installe?
Pangadaywalker said:
How did you installe?
Click to expand...
Click to collapse
Recovery Menü
Gesendet von meinem GT-I8190 mit Tapatalk
Pangadaywalker said:
Does this works with 10.2 from maclaw?
Click to expand...
Click to collapse
No
Gesendet von meinem GT-I8190 mit Tapatalk
Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
taaeem said:
Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, technically it should work. I've never tried it this way tho.
I installed b118 then to kitkat. Then i reverted to B125 with unlocked bootloader.
I think your way should work and may be more safe since we have barely any records of people hard bricking with kitkat.
Okay thanks
But is that for the custom Rom irrelevant from which firmware I install it?
Gesendet von meinem P6-U06 mit Tapatalk
taaeem said:
Okay thanks
But is that for the custom Rom irrelevant from which firmware I install it?
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
1. If you want a kitkat custom rom, unlock with kitkat and install surdu's 2.3.7 twrp for kitkat.
2. If you want a jellybean custom rom, i would recommend to unlock with b118 or b120 cn and install surdu's 2.3.3 twrp for jellybean.
Technically, if you loaded a jellybean custom rom on kitkat twrp recovery it could work but you might run into some issues.
taaeem said:
Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
CM from kk worked fine the last time I tried it, yes.
Sent from my P6-U06 using XDA Premium 4 mobile app
Appearantly the K3V2 phones can be easily unlocked, no need for B118 or other chinese firmwares anymore!
1. Make sure you have a working adb connection to the PC
2. Boot to fastboot/bootloader either via the command adb reboot bootloader or by restarting the phone and holding down vol down+power for about 10 seconds.
3. Send this command to the phone via adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
Note: Factory reset may or may not happen, so backup everything just incase, altough it has been reported that it does not happen by local xda users
It has been reported that this method works for unlocking the bootloader and flashing TWRP is successful.
According to huaweiblog.de it has been tested multiple times on P2, P6, and the Ascend Mate and it has always been successful.
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
You only need to be in Chinase firmware becouse it's unlocked, and you cant install Custom ROM without phone been unlocked..
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
As I understand when you flash a chinese rom it will run that command before the installation with the same key, but I may be wrong. Someone should try it and see if they can flash twrp afterwards when they havent been on any chinese firmwares yet.
I would try but I don't want to risk my phone.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Appearantly the K3V2 phones can be easily unlocked.
1. Boot to fastboot/bootloader
2. run this in adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
3. Note: Factory reset will happen, so backup everything
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Click to expand...
Click to collapse
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
bokchoi2020 said:
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
Click to expand...
Click to collapse
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
customromfan said:
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
Click to expand...
Click to collapse
I just wanted to test that but my phone says its already unlocked, too.
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, even "unlocked" the bootloader checks for a Huawei signature and you can't flash anything custom. The question is if this particular unlock gets rid of this check as China Firmwares do.
I think I'm gonna try it this night and report back.
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
tauio111 said:
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
Click to expand...
Click to collapse
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
boot partition holds the kernel
tauio111 said:
boot partition holds the kernel
Click to expand...
Click to collapse
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
tauio111 said:
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
Click to expand...
Click to collapse
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
I will make a backup than run the unlock commands and after that I will try do flash TWRP with fastboot.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
Click to expand...
Click to collapse
For me it did no factory reset.
Sent from my HUAWEI P6-U06 using xda app-developers app
Hey
A new update for our phone is there still with 4.2 and EMUI 1.6 but a new version!
http://www.huaweiblog.de/huawei/bugfixes-und-optimierungen-huawei-ascend-p6-firmware-leak-b132/
the site is on German so use the Google translator
you can install it via local update.
Gesendet von meinem P6-U06 mit Tapatalk
3. topic same content...
kabirjedi said:
3. topic same content...
Click to expand...
Click to collapse
Where? I didn't see sorry
Gesendet von meinem P6-U06 mit Tapatalk
1(last comment)::http://forum.xda-developers.com/showthread.php?t=2584675&page=6
2:http://forum.xda-developers.com/showthread.php?t=2685955
3:And this topic
taaeem said:
Hey
A new update for our phone is there still with 4.2 and EMUI 1.6 but a new version!
http://www.huaweiblog.de/huawei/bugfixes-und-optimierungen-huawei-ascend-p6-firmware-leak-b132/
the site is on German so use the Google translator
you can install it via local update.
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Hi mate can we install it over KK Custom Roms via local update ?
nARDOs said:
Hi mate can we install it over KK Custom Roms via local update ?
Click to expand...
Click to collapse
Nope. you need stock recovery..
ADHDDHDA said:
Nope. you need stock recovery..
Click to expand...
Click to collapse
Thanks mate :good:
Dont work link mega T_T
Enviado desde mi HUAWEI P6-U06 mediante Tapatalk
kabirjedi said:
1(last comment)::http://forum.xda-developers.com/showthread.php?t=2584675&page=6
2:http://forum.xda-developers.com/showthread.php?t=2685955
3:And this topic
Click to expand...
Click to collapse
Unlike that other thread, this one actually puts firmware version on the title.
Single post on thread doesn't actually make that B132 thread in any way.
Barleyman said:
Unlike that other thread, this one actually puts firmware version on the title.
Single post on thread doesn't actually make that B132 thread in any way.
Click to expand...
Click to collapse
Lulz ...And this topic:http://forum.xda-developers.com/showthread.php?t=2685960&page=3
Update b132 is an old firmware. It is actually b124 with a modified build.prop to give the impression it is a new firmware. Any perceived improvements are merely placebo.
Sent from my HUAWEI P6-U06 using xda app-developers app
b.watson said:
Update b132 is an old firmware. It is actually b124 with a modified build.prop to give the impression it is a new firmware. Any perceived improvements are merely placebo.
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Why do you think so?
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Change in the build.prop location from CN to yours.
Sent from my HUAWEI P6-U06 using Tapatalk
taaeem said:
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Did u find a solution ?
nARDOs said:
Did u find a solution ?
Click to expand...
Click to collapse
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
taaeem said:
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
nARDOs said:
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
Click to expand...
Click to collapse
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
taaeem said:
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
nARDOs said:
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
Click to expand...
Click to collapse
Strange I changed it to DE for Germany and it worked.
Gesendet von meinem P6-U06