[Interesting] General Bootloader Unlock for ALL Huawei Phones! - Huawei Ascend P6, Mate

Appearantly the K3V2 phones can be easily unlocked, no need for B118 or other chinese firmwares anymore!
1. Make sure you have a working adb connection to the PC
2. Boot to fastboot/bootloader either via the command adb reboot bootloader or by restarting the phone and holding down vol down+power for about 10 seconds.
3. Send this command to the phone via adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
Note: Factory reset may or may not happen, so backup everything just incase, altough it has been reported that it does not happen by local xda users
It has been reported that this method works for unlocking the bootloader and flashing TWRP is successful.
According to huaweiblog.de it has been tested multiple times on P2, P6, and the Ascend Mate and it has always been successful.
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/

Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
You only need to be in Chinase firmware becouse it's unlocked, and you cant install Custom ROM without phone been unlocked..

taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
As I understand when you flash a chinese rom it will run that command before the installation with the same key, but I may be wrong. Someone should try it and see if they can flash twrp afterwards when they havent been on any chinese firmwares yet.

I would try but I don't want to risk my phone.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

tauio111 said:
Appearantly the K3V2 phones can be easily unlocked.
1. Boot to fastboot/bootloader
2. run this in adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
3. Note: Factory reset will happen, so backup everything
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Click to expand...
Click to collapse
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?

bokchoi2020 said:
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
Click to expand...
Click to collapse
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.

customromfan said:
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
Click to expand...
Click to collapse
I just wanted to test that but my phone says its already unlocked, too.

There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, even "unlocked" the bootloader checks for a Huawei signature and you can't flash anything custom. The question is if this particular unlock gets rid of this check as China Firmwares do.
I think I'm gonna try it this night and report back.

So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt

tauio111 said:
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
Click to expand...
Click to collapse
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
boot partition holds the kernel

tauio111 said:
boot partition holds the kernel
Click to expand...
Click to collapse
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not

tauio111 said:
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
Click to expand...
Click to collapse
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

taaeem said:
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command

I will make a backup than run the unlock commands and after that I will try do flash TWRP with fastboot.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk

tauio111 said:
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
Click to expand...
Click to collapse
For me it did no factory reset.
Sent from my HUAWEI P6-U06 using xda app-developers app

Related

[Q] HTC One X Stock ROM

I am sure this has been covered before but I need to ask a question regarding the odexed 4.18.401.2 image, boot image and recovery image. After I download those from Mike's links is there a particular order in which they need to be flashed my phone is relocked and always in fastboot so I can't copy to sdcard. Any help would be appreciated thanks.
You need custom recovery at first try philz recovery ...then also erase the cache in fast boot...should all work
Gesendet von meinem Desire HD mit Tapatalk 4
need to unlock bootloader first
Thanks
One-X-master said:
You need custom recovery at first try philz recovery ...then also erase the cache in fast boot...should all work
Gesendet von meinem Desire HD mit Tapatalk 4
Click to expand...
Click to collapse
Can you point me in the right direction of Philz recovery thanks.
Use search or look in android development or original ..forgot where xD xD
Gesendet von meinem Desire HD mit Tapatalk 4
HTC One X
One-X-master said:
Use search or look in android development or original ..forgot where xD xD
Gesendet von meinem Desire HD mit Tapatalk 4
Click to expand...
Click to collapse
Thanks for your reply, do I need to unlock the bootloader before flashing philz recovery or can I just flash it in locked?
As nogotaclu has said, you need to unlock bootloader first
Gesendet von meinem HTC One X mit Tapatalk
HTC ONE X
ChiDi9901 said:
As nogotaclu has said, you need to unlock bootloader first
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
Thanks again, not wishing to be a pain just need to get the steps right so I don't screw it up.
Unlock the bootloader then
Falsh Philz recovery.img for the htc one x then
Do I lock the bootloader again or leave it unlocked before I flash the odexed.img then the boot.img?
No problem to help you. Just leave the bootloader open, to avoid confusion.
Gesendet von meinem Nexus 7 mit Tapatalk
HTC one X
ChiDi9901 said:
No problem to help you. Just leave the bootloader open, to avoid confusion.
Gesendet von meinem Nexus 7 mit Tapatalk
Click to expand...
Click to collapse
Thanks again, much appreciated, so this will bring me back to stock 4.22 sense 5 ROM so I can receive, if any, OTA updates?
I am used to rooting Samsung and flashing ROMS so easy but HTC seem to have a different approach, I simply did as I did with my old Samsung and soft bricked my HTC lol. Doh!
They aren't the same phones so you can't do that... And yes so you can get back to stock for the ota
Gesendet von meinem Desire HD mit Tapatalk 4

ROM flashing with KK

Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
taaeem said:
Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, technically it should work. I've never tried it this way tho.
I installed b118 then to kitkat. Then i reverted to B125 with unlocked bootloader.
I think your way should work and may be more safe since we have barely any records of people hard bricking with kitkat.
Okay thanks
But is that for the custom Rom irrelevant from which firmware I install it?
Gesendet von meinem P6-U06 mit Tapatalk
taaeem said:
Okay thanks
But is that for the custom Rom irrelevant from which firmware I install it?
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
1. If you want a kitkat custom rom, unlock with kitkat and install surdu's 2.3.7 twrp for kitkat.
2. If you want a jellybean custom rom, i would recommend to unlock with b118 or b120 cn and install surdu's 2.3.3 twrp for jellybean.
Technically, if you loaded a jellybean custom rom on kitkat twrp recovery it could work but you might run into some issues.
taaeem said:
Hey
I need a unlocked bootloader for ROMs like CM 10.2 and I don't want to flash B120 because of the brick risk. So can I just flash KK beta, this has an unlocked bootloader, and from there a custom ROM? Or can I flash KK and than B125 again so my bootloader is still unlocked and flash from there a Custom ROM?
thanks for your help
Gesendet von meinem P6-U06 mit Tapatalk
Click to expand...
Click to collapse
CM from kk worked fine the last time I tried it, yes.
Sent from my P6-U06 using XDA Premium 4 mobile app

Can I flash MIUI rom on B118CN?

Can I flash MIUI rom on B118CN?
kjgausvik said:
Can I flash MIUI rom on B118CN?
Click to expand...
Click to collapse
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
taaeem said:
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Thanks! it worked fine

Elephone P8000 US version System Dump and Auto script from the ASC dev tool.

Just as it says above:
System Dump
And the dev tool used. ALL credit goes to Octanium
Android Script Creater
Also just a tip, over at Neeodrom.com they have TWRP 3.0.0 Recovery loaded and it works great!
thank you very much.
i think there will be many users waiting for it.
i will make a flashable image from it for all asap!
Dvalin21 said:
Just as it says above:
System Dump
And the dev tool used. ALL credit goes to Octanium
Android Script Creater
Click to expand...
Click to collapse
possible you can take out the boot.img too?
use adb for it.
write
Code:
adb shell
su
and to take it out to sdcard
Code:
dd if=/dev/block/mmcblk0p7 of=/sdcard/boot.img
thank you in advanced
nice, thank all
yuwai said:
nice, thank all
Click to expand...
Click to collapse
I think tomorrow I will have the complete stock ROM with us bands for you (version b)
Gesendet von meinem Elephone P8000 mit Tapatalk
boot.img
Ask and you shall receive!
Dvalin21 said:
boot.img
Ask and you shall receive!
Click to expand...
Click to collapse
Thank you
Gesendet von meinem Elephone P8000 mit Tapatalk
skeleton1911 said:
I think tomorrow I will have the complete stock ROM with us bands for you (version b)
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
Hi, can you share the stock ROM with the US bands?
manoftomorrow35 said:
Hi, can you share the stock ROM with the US bands?
Click to expand...
Click to collapse
That's the plan. But he need to build it first
Sent from my Elephone P8000 using Tapatalk
skeleton1911 said:
Thank you
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
System.IMG as requested.
Sent from my Elephone P8000 using Tapatalk
Dvalin21 said:
System.IMG as requested.
Sent from my Elephone P8000 using Tapatalk
Click to expand...
Click to collapse
Thank you!
Gesendet von meinem Elephone P8000 mit Tapatalk
2 hours then we.have a new thread
Gesendet von meinem Elephone P8000 mit Tapatalk
here you have!
http://forum.xda-developers.com/ele.../rom-p8000-version-b-baseband-l1-mp3-t3322615
---------- Post added at 11:25 AM ---------- Previous post was at 10:33 AM ----------
and another good goal would be if our US Version users could use our Version A custom roms.
we can test it right here ( if only the baseband is different)
p.s: your phone dont get damage . that is only a little software baseband , if it dont work just restore your backup or flash the stock version B again.
1. flash my Eragon Rom via recovery ( to test, if it will work here it also will work on Nexus rom )
http://forum.xda-developers.com/ele...1-0-android-5-1-t3195007?styleid=19&nocache=1
2. Reboot the phone.. and wait until all is loaded.
3. go to recovery again ( vol+ and power)
flash this : https://mega.nz/#!G8R0zCLL!gihhjLHS83xTgtcUkkvmdfYbwzmzFg572Uj-i0dJW1k and wipe cache and dalvik then reboot
4. just in case it dont load the rom . flash the baseband on top of my rom in recovery, without a reboot between it
And wipe cache/dalvik
Please report back if that will work!
skeleton1911 said:
here you have!
http://forum.xda-developers.com/ele.../rom-p8000-version-b-baseband-l1-mp3-t3322615
---------- Post added at 11:25 AM ---------- Previous post was at 10:33 AM ----------
and another good goal would be if our US Version users could use our Version A custom roms.
we can test it right here ( if only the baseband is different)
p.s: your phone dont get damage . that is only a little software baseband , if it dont work just restore your backup or flash the stock version B again.
1. flash my Eragon Rom via recovery ( to test, if it will work here it also will work on Nexus rom )
http://forum.xda-developers.com/ele...1-0-android-5-1-t3195007?styleid=19&nocache=1
2. Reboot the phone.. and wait until all is loaded.
3. go to recovery again ( vol+ and power)
flash this : https://mega.nz/#!G8R0zCLL!gihhjLHS83xTgtcUkkvmdfYbwzmzFg572Uj-i0dJW1k and wipe cache and dalvik then reboot
4. just in case it dont load the rom . flash the baseband on top of my rom in recovery, without a reboot between it
And wipe cache/dalvik
Please report back if that will work!
Click to expand...
Click to collapse
i flashed your rom baseband unknown even i flashed baseband still baseband unknown
i using spflash flash stock rom VER B got baseband back, and after flash your rom still unknown baseband and flashed baseband still baseband unknown
yuwai said:
i flashed your rom baseband unknown even i flashed baseband still baseband unknown
i using spflash flash stock rom VER B got baseband back, and after flash your rom still unknown baseband and flashed baseband still baseband unknown
Click to expand...
Click to collapse
Wipe cache and dalvik after you flashed the baseband on top of my rom
Gesendet von meinem Elephone P8000 mit Tapatalk
skeleton1911 said:
Wipe cache and dalvik after you flashed the baseband on top of my rom
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
i did samething
yuwai said:
i did samething
Click to expand...
Click to collapse
Okay.thanks. tomorrow i will send you a custom system.IMG from me.
You have to flash it via flashtools .
That will fix the baseband issue in the custom ROMs!
You will get it via private message.
Thanks
Gesendet von meinem Elephone P8000 mit Tapatalk
skeleton1911 said:
Okay.thanks. tomorrow i will send you a custom system.IMG from me.
You have to flash it via flashtools .
That will fix the baseband issue in the custom ROMs!
You will get it via private message.
Thanks
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
ok,, anytime you need me test,, right now i flash back stock rom using spflash, becasue i did twrp full backup restore still no work when flash your rom
i think your custom rom include baseband, i flash flyme nothing happen work fine baseband can get it
skeleton1911 said:
Okay.thanks. tomorrow i will send you a custom system.IMG from me.
You have to flash it via flashtools .
That will fix the baseband issue in the custom ROMs!
You will get it via private message.
Thanks
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
Skeleton1911,
so what this means is we can now flash version A roms and then flash your baseband over and it will work?

LG G8s ThinQ root

Hello Guys,
id like to root my Phone, but i dont find any options for my Hardware. Can i use the guids for the Normal G8?
thx for the answer
https://forum.xda-developers.com/lg-g8/how-to/rooting-g8s-guide-t4044193
Gesendet von meinem LM-G810 mit Tapatalk
Roger.T said:
https://forum.xda-developers.com/lg-g8/how-to/rooting-g8s-guide-t4044193
Gesendet von meinem LM-G810 mit Tapatalk
Click to expand...
Click to collapse
THX fore help! I have another Problem, at first i have a lot of trouble to boot my phone with adb in bootloader Modus, after that i tried to become my Phone ID. But he dont find my device. I checked the drivers, installed it again an put the LG Software on my PC but it dont works...
How could i get the ID?
Dicornius said:
THX fore help! I have another Problem, at first i have a lot of trouble to boot my phone with adb in bootloader Modus, after that i tried to become my Phone ID. But he dont find my device. I checked the drivers, installed it again an put the LG Software on my PC but it dont works...
How could i get the ID?
Click to expand...
Click to collapse
Have you activated the developer options and there USB-Debugging?
Gesendet von meinem LM-G810 mit Tapatalk
Sure, booth of that.

Categories

Resources