Hey Dudes,
since i have updated to last 4.2.2 sony jb firmware and rooted (doom) and istalled dualrecovery (NUT) my ota won't work anymore.
What is the reason? Is it Root or Recovery or both?
Regards
SafiXS said:
Hey Dudes,
since i have updated to last 4.2.2 sony jb firmware and rooted (doom) and istalled dualrecovery (NUT) my ota won't work anymore.
What is the reason? Is it Root or Recovery or both?
Regards
Click to expand...
Click to collapse
Any change in system partition disables ota. You can flash just the system from an apropriate ftf if you need to update ota.
So I have to flash back to stock? A soundmod will also disable ota? Holy crap...
Gesendet von meinem C6503 mit Tapatalk 4 Beta
SafiXS said:
So I have to flash back to stock? A soundmod will also disable ota? Holy crap...
Gesendet von meinem C6503 mit Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes, I think so. I just deleted preinstalled facebook and OTA didn't work....
Hi guys!
Stock B125 rom and Pure Audio TM possible?
How?
Thanks
kabirjedi said:
Hi guys!
Stock B125 rom and Pure Audio TM possible?
How?
Thanks
Click to expand...
Click to collapse
Yes Or You Can Wait Till Tomm HYD52ROM For B125. It Includes Pure Audio.
husen4u said:
Yes Or You Can Wait Till Tomm HYD52ROM For B125. It Includes Pure Audio.
Click to expand...
Click to collapse
Thank you.Im wait 118CN bricked my phone.
yes try hyd52rom.it's included.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Appearantly the K3V2 phones can be easily unlocked, no need for B118 or other chinese firmwares anymore!
1. Make sure you have a working adb connection to the PC
2. Boot to fastboot/bootloader either via the command adb reboot bootloader or by restarting the phone and holding down vol down+power for about 10 seconds.
3. Send this command to the phone via adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
Note: Factory reset may or may not happen, so backup everything just incase, altough it has been reported that it does not happen by local xda users
It has been reported that this method works for unlocking the bootloader and flashing TWRP is successful.
According to huaweiblog.de it has been tested multiple times on P2, P6, and the Ascend Mate and it has always been successful.
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
You only need to be in Chinase firmware becouse it's unlocked, and you cant install Custom ROM without phone been unlocked..
taaeem said:
Make it a difference? I mean for most of the Custom ROMs you need to be on Chinese Firmware if I understand everything right?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
As I understand when you flash a chinese rom it will run that command before the installation with the same key, but I may be wrong. Someone should try it and see if they can flash twrp afterwards when they havent been on any chinese firmwares yet.
I would try but I don't want to risk my phone.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Appearantly the K3V2 phones can be easily unlocked.
1. Boot to fastboot/bootloader
2. run this in adb:
Code:
fastboot oem unlock UUUUUUUUUUUUUUUU
3. Note: Factory reset will happen, so backup everything
source: http://www.huaweiblog.de/allgemein/general-bootloader-unlock-fuer-alle-huawei-phones/
Click to expand...
Click to collapse
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
bokchoi2020 said:
Yea, it seems really cool! Much less risky compared to installing B118cn or 120cn! And much less work compared to flashing kitkat beta.
Can anyone confirm if this works?
Click to expand...
Click to collapse
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
customromfan said:
The lock command does not work for me, but the unlock command seems to work. But I tested it with B125 and already unlocked bootloader. But it seems to work. No error.
Now just someone with locked bootloader should test it.
Click to expand...
Click to collapse
I just wanted to test that but my phone says its already unlocked, too.
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
There was a thread here, where I says that the bootloader is unlocked but its encrypted so you can't flash anything.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Yes, even "unlocked" the bootloader checks for a Huawei signature and you can't flash anything custom. The question is if this particular unlock gets rid of this check as China Firmwares do.
I think I'm gonna try it this night and report back.
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So you can't install TWRP for unlocked firmware?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
tauio111 said:
Maybe, incase of the honor 2, this enabled the flashing of boot.img but not the bootloader.img. Dont try to flash twrp to boot partition.
Maybe some things are different on P6, but I'd doubt
Click to expand...
Click to collapse
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Okay than I don't try that, when I can flash a boot.img I could install a custom ROM or?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
boot partition holds the kernel
tauio111 said:
boot partition holds the kernel
Click to expand...
Click to collapse
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
So can I or not?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
tauio111 said:
no, if it doesnt unlock the bootloader partition to flashing. But here is the question - does it unlock it or not
Click to expand...
Click to collapse
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
taaeem said:
Can it brick m phone when it doesn't work? If not I would maybe try.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
I will make a backup than run the unlock commands and after that I will try do flash TWRP with fastboot.
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
tauio111 said:
Well, there are no reports of bricked devices by using this method, but be caucious. It will also do a factory reset, so make a backup or something before running the command
Click to expand...
Click to collapse
For me it did no factory reset.
Sent from my HUAWEI P6-U06 using xda app-developers app
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Change in the build.prop location from CN to yours.
Sent from my HUAWEI P6-U06 using Tapatalk
taaeem said:
Hey can anyone tell me how to change the URL in the weather app from weather.com.cn to weather.com ?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Did u find a solution ?
nARDOs said:
Did u find a solution ?
Click to expand...
Click to collapse
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
taaeem said:
It's solved with the build.prop thing.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
nARDOs said:
wich rom are u using ?
I m on B506 and buil.prop didn t work for me. don`t know why.
Click to expand...
Click to collapse
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
taaeem said:
Did you reboot your phone after changing it?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
nARDOs said:
I did. I even wiped dalvik cache.
it s still com.cn even if build.prop languege is set on en and region US.
Click to expand...
Click to collapse
Strange I changed it to DE for Germany and it worked.
Gesendet von meinem P6-U06
Can I flash MIUI rom on B118CN?
kjgausvik said:
Can I flash MIUI rom on B118CN?
Click to expand...
Click to collapse
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
taaeem said:
Yes you can but maybe update first to B120CN but I don't think that makes a difference.
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Thanks! it worked fine