Hi guys
Bit stupid of me.
I rooted and installed recovery then i wanted to wipe the data and start a clean rom - the stock rom, no other rom was ever loaded.
I went into recovery and wiped cache and data etc
I think what I have done is wipe the rom itself and wiped all data.
I can boot up but it sticks on the HTC screen and I can't even turn the phone off from there.
I'm sure this is fixable but it's been a long time since i used adb etc and i am not even sure where or what or the steps to take to get to a point where I can load stock rom back on to my phone. If anyone could throw a few pointers my way I'd be grateful.
Cheers in advance.
Turn phone off by keep the power button down for about 10 seconds, volume down and power together to boot into recovery, install new rom
Sent from my HTC One_M8 using Tapatalk
RossMacgill said:
Turn phone off by keep the power button down for about 10 seconds, volume down and power together to boot into recovery, install new rom
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
it won't boot into recovery
Can you get to bootloader.? I bet if you keep trying you will be able to
Maybe try power and volume up to turn off, then hold volume down while turning on
Sent from my HTC One_M8 using Tapatalk
oh wow that worked.. the switching up and down buttons ...how very odd.
So now I can mount a usb with otg cable and load a rom thanks very much
Related
I flashed the nexus ics rom for my Tmobile Samsung galaxy s2, and now I cant get into recovery mode, phone is still rooted, rom manager freezes every time it asks for superuser permisions, and I cant get into recovery mode by holding down the volume buttons and power key.,,,, any suggestions??
Anyone?
Sent from my SAMSUNG-SGH-T989 using XDA
what exactly did you do?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
wait to get into clockwork mod its up and down arrows and power button then when it says samsung let go power button but keep holding up and down arrows until clockwork turns on.
once in clockwork factory reset wipe cache and reflash a different rom. if needed dload and new rom and load into clock work it usng mount usb option under advanced to put the rom on your phone then flash it. if you cant get into clockwork go to this guide to use odin to flash back a stock rom and start over.
http://forum.xda-developers.com/showthread.php?t=1513359
Get into recovery by adb?
adb.....eeew last resort
Try quickboot from the market
Sent from the iPhone graveyard.
Rancidm thanks, that got me in recovery, wiping cache fixed the freezing issue. Everything is fine now!
Sent from my SAMSUNG-SGH-T989 using XDA
tylerholbrook said:
Rancidm thanks, that got me in recovery, wiping cache fixed the freezing issue. Everything is fine now!
Sent from my SAMSUNG-SGH-T989 using XDA
Click to expand...
Click to collapse
Oh, you didn't know how to get into CWM.... Also, if someone helps you push his thanks button.
I flashed the CWM and I was able to go into recovery and flash the liquid rom. And now it doesnt turn on or even vibrate when I try to power it on. Nothing on the screen. And when i plug it into the computer a message asking me to format the Drive. And screen doesnt turn on or show the charging indicator when I try to charge it.
DDeveryday said:
I flashed the CWM and I was able to go into recovery and flash the liquid rom. And now it doesnt turn on or even vibrate when I try to power it on. Nothing on the screen. And when i plug it into the computer a message asking me to format the Drive. And screen doesnt turn on or show the charging indicator when I try to charge it.
Click to expand...
Click to collapse
You guys aren't reading.... you flashed the wrong rom... you were supposed to flash the Hercules one... which one did you flash? now you better have warrantee...
Sent from my SGH-T989 using xda premium
Is there any way to fix it?
Sent from my Nexus 4 using Tapatalk 2
DDeveryday said:
Is there any way to fix it?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Not that i know of that's why i said you better have warrantee... which one did you install?
Sent from my SGH-T989 using xda premium
djtheraven said:
Not that i know of that's why i said you better have warrantee... which one did you install?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I installed CWM with odin and I was able to boot into CWM recovery I wiped data and cache then install LIQUIDSMOOTH rom then latest gapps and restart.Nothing shows up on the screen and no vibration or anything.
I got the phone for about 8 months. Should I send it in to Samsung or try one of those jtag repair service. Their description says they can repair hard brick devices. Has anyone tried it and are they reliable?
if you have CWMR installed you should be able to just turn off your device and turn it on hold both volume up and down once the CWMR comes up take your fingers off the volume buttons.
EDIT: if you can access the CWMR find the proper ROM for your device put in a SDcard and put the SDcard in your phone and boot up CWMR and install from zip from sdcard following this to install it correctly.
I normally do...
Wipe Data/Factory reset
Wipe cache partition
install zip from sdcard
go to Advanced
Wipe dalvik cache
Wipe battery status
Fix permissions (just incase)
Reboot Device
wait about usually 3-8 minutes depends on the ROM. if it's longer then that then your stuck in a boot loop
this is all on done on CWMR v6.0.1.5
Same thing happen to me. Now my phone won't turn on
I used kies to go back to stock rom, now my phone starts goes to samsung screen, then goes to samsung screen, and keep looping it. never going into android os :S
Boot into recovery and wipe data (factory reset) and cache.
ccigaM said:
I used kies to go back to stock rom, now my phone starts goes to samsung screen, then goes to samsung screen, and keep looping it. never going into android os :S
Click to expand...
Click to collapse
Calm down. And no need to open a new thread everytime.
Pull off the battery and boot in stock recovery by pressing "volume up+homme button+ power button" when Samsung logo appears release power button but keep pressing the other two.
You will be then in recovery.
Select wipe phone/factory reset
And wipe cache. After that select reboot.
Phone should boot normally.
Sent from my GT-N7100 using xda premium
Thanks marios u are a life saver!
but now i cant access my phone storage when i connect usb
Enable usb debugging.
Sent from my GT-N7100 using xda app-developers app
on my phone htc one x hboot 1.72 unlocked s-on i cant install it. Because I cant use my touchscreen When I want install philz it also dont work its always the old recovery when i restart
xxlocalxx said:
on my phone htc one x hboot 1.72 unlocked s-on i cant install it. Because I cant use my touchscreen When I want install philz it also dont work its always the old recovery when i restart
Click to expand...
Click to collapse
So got it charged huh ! Flashed philz via fastboot
Sent from my HTC One X using XDA Premium 4 mobile app
i also wanted but i dont find a img there is only onein the zip, can i just flash this?
i found only 5.11
xxlocalxx said:
i also wanted but i dont find a img there is only onein the zip, can i just flash this?
Click to expand...
Click to collapse
Yes that's correct
Fastboot flash recovery recovery.img
Fastboot erase cache
Sent from my HTC One X using XDA Premium 4 mobile app
lol now i stuck in the htc logo after arhd flash but i wiped and flashed boot.img
xxlocalxx said:
lol now i stuck in the htc logo after arhd flash but i wiped and flashed boot.img
Click to expand...
Click to collapse
Wipe data factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache, data, system
Then install rom.zip
Sent from my HTC One X using XDA Premium 4 mobile app
There ya go.
Sent from my Evita
well good it just took some time
but at least where is this button on htc phones
http://www.lgblog.de/wp-content/uploads/4x-hd1.jpg
the right one in the corner
well good it just took some time
What do you mean ?
it startet then
but how can i shutdown the phone always when i press long the power button it turn black then it rstart again it dont stay off
xxlocalxx said:
it startet then
but how can i shutdown the phone always when i press long the power button it turn black then it rstart again it dont stay off
Click to expand...
Click to collapse
Flash the xposed framework and select at least the APM mod......makes powering off easy
i installed xposed with toolbox now but i dont find anything to change power options
I have no clue anymore what you are looking for anyway, a way to power off the phone ?
Hit it real hard with a heavy hammer !
I never used it, i am running viper and it has APM built in to acces the quick menu's and settings
i want it to when i press long power button taht it keeping off and not starting again when i remove finger from button
xxlocalxx said:
i want it to when i press long power button taht it keeping off and not starting again when i remove finger from button
Click to expand...
Click to collapse
Not gonna happen, power button is hard coded to simulate a battery pull and reboot by default on longpress.
Turn it off via other methods !
and my keyboard on phone also dont have an "Y" button
Y .....mine does....see : small one y and capital Y You seem to have weird problems. ...
now a not weird problem
my brightness keeps being on full. I doesnt change anything when i change it on settings to lower or higher. it stays bright
Flash another rom or reflash the rom with a FULL wipe. It's a issue that is unlikely to happen on a so close to stock rom. And read the rom thread, check AND search if there are more reports of that problem !
I did not have this on stock and now i also don't have it on Viper X.
I am rooted with TWRP 2.7.0.2 installed. I can boot into TWRP using the Quickboot app, but not using the button combo (power+vol. down, when the logo appears release power, while still holding vol. down push power and vol. up). Does anyone know how to get into TWRP on the Verizon VK810 from a powered off device?
Just be super quick...(think power on/sound down - power off then all 3 at once. Recovery will display.
MAKE a recovery backup! Be safe.
Cal said:
Just be super quick...(think power on/sound down - power off then all 3 at once. Recovery will display.
MAKE a recovery backup! Be safe.
Click to expand...
Click to collapse
Thanks for helping, Cal. No matter how quick I am, it just restarts to the logo, even if I start before I see the logo. If I hold the three buttons for a long time, I get the ieme screen to flash for about a second. Also, if I hold down the power and volume down for a long time I get stock "System Recovery", the one with the 4 options. From there I can either reboot, wipe cache, factory reset or power off.
Sent from my SM-G900V using XDA Free mobile app
Make sure you are shutdown. All must be off - Then start the button hold process to 'recovery'.
Cal said:
Make sure you are shutdown. All must be off - Then start the button hold process to 'recovery'.
Click to expand...
Click to collapse
I've been doing that, to no avail. Curious thing, though. I booted into System Recovery by pushing the power+volume down. I was given 4 options. Factory reset, power off, wipe cache and safe boot. I use the volume rocker to get to "wipe cache", push power to select, and it takes me to TWRP. I can get there now from a powered off state, which is the goal, I just don't know why.
Sent from my SM-G900V using XDA Free mobile app
If it works, Great! Why worry 'why'!!
New to me! Still on the 500.
Cal said:
If it works, Great! Why worry 'why'!!
New to me! Still on the 500.
Click to expand...
Click to collapse
Lol...yeah, I'm really not too worried about "why", just curious. Thanks again for the help.
Sent from my SM-G900V using XDA Free mobile app
I had problems getting into recovery also. To resolve this issue, I just downloaded reboot recovery from the play store. Works like a charm.
spiceditup and cal, what device do you have? 500 does not equal vk810 unfortunately for us poor saps who sit under the verizon throne.
Sent from my VK810 4G using Tapatalk
spiceditup said:
I had problems getting into recovery also. To resolve this issue, I just downloaded reboot recovery from the play store. Works like a charm.
Click to expand...
Click to collapse
I use Quickboot. It works too. The thing is, if I ever have a boot loop or brick my device, I'll have no way to get into recovery with Quickboot.
Do you have TWRP installed and are you having the same problem I am, namely the button combo doesn't work?
Sent from my SM-G900V using XDA Free mobile app
As far as I know, the only way of getting into TWRP from a powered off state on the VK810 is by selecting an option from the stock recovery such as "Factory Reset". Wipe Cache performed the same thing, trying to pass a command off to the rest of the stock recovery, but since it's been replaced with TWRP, TWRP is simply loaded and the command (no matter if it's Factory Reset or Wipe Cache) isn't executed.
For example, it works the same way with the LG G3, at least on Verizon.
roirraW "edor" ehT said:
As far as I know, the only way of getting into TWRP from a powered off state on the VK810 is by selecting an option from the stock recovery such as "Factory Reset". Wipe Cache performed the same thing, trying to pass a command off to the rest of the stock recovery, but since it's been replaced with TWRP, TWRP is simply loaded and the command (no matter if it's Factory Reset or Wipe Cache) isn't executed.
For example, it works the same way with the LG G3, at least on Verizon.
Click to expand...
Click to collapse
Good to know that I didn't mess something up. I searched the Web, but couldn't find anything that even remotely said what you said above. Thanks for clarifying it.
Sent from my SM-G900V using XDA Free mobile app
dadof10 said:
Good to know that I didn't mess something up. I searched the Web, but couldn't find anything that even remotely said what you said above. Thanks for clarifying it.
Click to expand...
Click to collapse
You're welcome! I was totally surprised the first time I found out my LG devices used that "stock recovery front end" and that you can't boot directly to custom recovery from power off. I meant to add that if anyone found I was full of bat guano to please correct anything I said.