Develop Bugs

t989 tmobile not getting in download mode, HELP NEEDED PLEASE!!

the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?

Odin stock
jangst123 said:
Odin the ROM below.
If you still can not get it to boot, Odin the Kernel
[STOCK] T-Mobile Samsung Galaxy S II Stock Kernel // UVKID
Originally Posted By: bubby323
and
[ROM] SGH-T989 // UVKID // Stock // Deodexed // Rooted //Busybox
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
Sent from my SGH-T989 using xda premium

how can i get odin to read my device if my device is stuck in the screen mentioned and when i enter download mode through usb connecting, takes me to the warning screen!! but when i press volume up it doesnt go into the next step, it goes straight to the same screen that i mentioned. thanks for replying btw, your the only person thats helped me out since i started searching for help.

Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium

Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.

quest4fire said:
Did you try the button combo to get into download/odin mode? If so you need to get a usb jig to force it into download mode so you can flash back to stock via odin
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i can get into download mode by plugging usb while holding the vol up/vol down. but when it asks me to press vol up, it takes me to the same screen with "phone-!-PC".

wannagofast said:
Same thing happened to me. Just have Odin open and ready to go, plug phone into DL mode just like normal, when the screen pops up give Odin a second or two and then you should see the com light up yellow as Odin recognise your device. Start the flash and let Odin do it's thing and it will reboot and all will be fine.
Click to expand...
Click to collapse
Ok, just tried this method, when i get into download mode i click vol up and continues to the screen im stuck on. odin still didnt recognize my phone

me 2
im having the same issue with my phone. i googled around it saw ppl with the same issue, but when ppl fix their problem they didnt say how. i left a post on 3 of the threads (including 1 not on xda) but i havent received a response. i tried the hold the buttons method, the delete kies method, the just let odin flash a rom over but when odin gets to "cashe" it fails everytime. i hope i can find a fix, cuz ppl are having this problem and fixing there phone pretty quickly.

did u reinstall the drivers just asking

kdog808 said:
did u reinstall the drivers just asking
Click to expand...
Click to collapse
yeah, i re-installed the samsung kies drivers and deleted running apps in task manager. i also re-installed phone drivers to my cpu. and i re-installed odin to the cpu and restarted the cpu after each method. nothing worked!!! i also tried holding the vol+home+power button, but the error message just pops up.

Yeah my phone is soft bricked I really need to get into download mode without this annoying message

Trevnerdio said:
Yeah my phone is soft bricked I really need to get into download mode without this annoying message
Click to expand...
Click to collapse
Try the second link in the second post. It worked for me. The post with the headline Odin Mode

if your screen has a pc and a warning symbol you still can odin,
open oding and conect your phone to pc while that screen you are saying pops up then see if odin recognizes..

darocsfinest1 said:
Try the second link in the second post. It worked for me. The post with the headline Odin Mode
Click to expand...
Click to collapse
I already did that plus everything else possible :\

Trevnerdio said:
I already did that plus everything else possible :\
Click to expand...
Click to collapse
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.

mickeycobra04 said:
have you tried reinstalling kies, try it thats what i did. i was in the same screen, it was never read by odin until i did exactly that.
Click to expand...
Click to collapse
My device is read by Odin and it flashes things. Once I flash a working rom though, it bootloops and I have no recovery to wipe data. I've never been able to get the repartition function to work
And the error I keep receiving every time almost is an error about line 1876. I have no idea what this is. I Googled it and I can't find it.

FWIW My phone would not go into download mode to save my life. I then decided to try the OE Samsung cable instead of the motorola cable I had been using and it worked right away.
Troubleshooting 101, start with the basics.

So I have the same problem as the OP. The only screen I boot to is mobile ! PC in Odin mode. This happened after I was rooted with my stock rom and CWM, but tried to do the OTA update from Kies.
My device is recognized by Odin utility, so I tried what the 2nd poster put and used Odin to flash the stock kernel (UVKID tar) from the PDA button and it failed. I used the default settings in Odin, but maybe I didn't set one right? I have attached a screen shot.
So now do I use Odin to flash the stock recovery? I'm working on making a USB jig in case that will help.
UPDATE: I was able to use Odin to flash the Stock Recovery. Now it boots up like normal. I would like to try the OTA update through Kies again, but I'm worried. Any suggestions?

Kies Firmware Emergency Recovery
mickeycobra04 said:
the phone does not boot up . when i power on, a screen saying :
odin mode
product name: t989
custom binary download: no
current binary: samsung official
(mobile)--!--(PC)
"Firmware upgrade ecountered an issue. please select recovery mode in Kies & try again.".
I have tried to connecting it to kies but its not recognzied. any suggestions?
Click to expand...
Click to collapse
OK the somewhat hidden Firmware Recovery built into Kies is not to hard to find,
First you will need to write on a piece of paper your S/N and your Model #, the same way it is written under the battery on the sticker.
Second boot your phone into download mode and connect it to the computer.
Third open Kies, select the tools drop down menu.
Now you have a choice. Select Firmware Emergency Recovery to recover your current firmware version... or select Firmware Upgrade and Initialization to install the latest OTA, either way just fallow the steps on screen and when done your will have a working phone.
hit the thanks button if this helped

Bro you should check the dates out xD thx anyway though
Sent from my SGH-T989 using xda premium

[Q] Firmware upgrade encountered an issue

I am not technically inclined so I really can't understand big technically words. To tell you the truth I am out of my league and would appreciate someones help that is very simplified and dulled down for me.
I was trying to upgrade/root my phone and the USB drive malfunctioned/disconnected during the process. Consequently my phone is now non-functioning and stuck on the error, "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I tried this but Kies requires the phone to be put in recovery mode and the phone can't be put in recovery mode due to the error. Please can someone help me revive my phone.
I have a Samsung Note II SGH-T889 - Tmobile.
I am not sure what other information to provide. But can someone help me please.
Sam-

greatpotentate said:
I am not technically inclined so I really can't understand big technically words. To tell you the truth I am out of my league and would appreciate someones help that is very simplified and dulled down for me.
I was trying to upgrade/root my phone and the USB drive malfunctioned/disconnected during the process. Consequently my phone is now non-functioning and stuck on the error, "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I tried this but Kies requires the phone to be put in recovery mode and the phone can't be put in recovery mode due to the error. Please can someone help me revive my phone.
I have a Samsung Note II SGH-T889 - Tmobile.
I am not sure what other information to provide. But can someone help me please.
Sam-
Click to expand...
Click to collapse
Can you access download mode? then boot in download mode and reflash the firmware in ODIN PC, make sure that you use a usb port that works fine.

greatpotentate said:
I am not technically inclined so I really can't understand big technically words. To tell you the truth I am out of my league and would appreciate someones help that is very simplified and dulled down for me.
I was trying to upgrade/root my phone and the USB drive malfunctioned/disconnected during the process. Consequently my phone is now non-functioning and stuck on the error, "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I tried this but Kies requires the phone to be put in recovery mode and the phone can't be put in recovery mode due to the error. Please can someone help me revive my phone.
I have a Samsung Note II SGH-T889 - Tmobile.
I am not sure what other information to provide. But can someone help me please.
Sam-
Click to expand...
Click to collapse
if u cn go to download mode flash a stock rom

Soft Brick Samsung Galaxy Tab 10.1 Help

Hello, First of all let me introduce myself. My name is Mark, I live in the Philippines,and I'm also a grade 7
If you're wondering why someone so young is in this forums, it's because I just need help with my tablet.
I have a Samsung Galaxy Tab 3 10.1, I tried to root it with Kingo Root. But I was too late to find out that my tablet wasn't supported. I tried to unbrick it before but I haven't found anything yet, and then my tablet went out of battery. When it had its battery back, I can't go to Odin/Download mode anymore. If anyone can help me fix this problem and unbrick my device, that would be very helpful. Also please reply quickly since we need it now.
Thanks in advance.
-Mark

Hello there !
If you can't go to "Download mode" anymore, I'm sorry but it starts bad...
Can you still go on "Recovery mode" ?

Dowdheur said:
Hello there !
If you can't go to "Download mode" anymore, I'm sorry but it starts bad...
Can you still go on "Recovery mode" ?
Click to expand...
Click to collapse
Hello there, sorry for late response. I'm still at church replying and I dont have my tablet yet. How do you get to recovery mode by the way?
Oh and when I try to do this: Home button+power+lower volume it just wont go to odin/download mode. And it just flickers and goes back to samsung screen

Emergency!! Emergency!!
Sorry, I'm not here with a solution to the problem but Even i am dealing with the same kind of problem... actually I was updating my Galaxy Tab 3.7.0 Android jellybean 4.1.2 version to kitkat 4.4.2... but somehow my pc got hanged and the whole process was terminated.. after that i tried to switch on my tab 3.7.0 but It just kept saying 'Firmware upgrade encountered an issue. please select recovery mode in kies and try again!!'. I am not able to go into download mode or either recovery mode. When i tried it to connect with kies it said that kies doesn't support this device. i have all the drivers needed. And it's not even charging. I tried to recover it by using CWF recovery mod using ODIN 3.09 but the process just stucks at 'setting connection' I AM STUCK! PLEASE HELP!

HELP Note II stuck on splash screen

Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help

classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit

Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help

No one can help

sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back

sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation

Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2

Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me

Rooted sprint s6 stuck in boot loop mode ( usb can't be recognized by windows 8.1)

please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!

Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:

I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.

update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.

update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.

Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.

help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?

Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.

Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?

Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.

question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?

Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?

update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device

Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/

thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!

Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?

Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.

koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes

Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)

Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk