Related
Hi guys.
At first sorry for my english im beginner.
I have problem with upgrade official firmware on my Huawei Ascend P6. Now I have B125 but I want upgrade my P6 to B506 by DLOAD way.
Everytime when I try it through recovery it freeze in Checking module FASTBOOT and it crash and it starts again. I take a video for better imagination of my problem so if you could help me text me by PM and I send you link to youtube (I cant post link here because I am new user).
Firstly I thought the problem was in package so I tryied upgrade to B132 and there was the same problem. In the January when I upgrade my phone to B125 it was done without problems. Since I take B125 update I install .zip for the choose default storage between SD and internal storage through (i cant remember exactly) Clockworkmod recovery or TWRP. I have rooted device. Please can anybody help me?
Try update pulsing volume+ - and power...
I try it for hundred times.
Can you start your phone normally or it is in a loop? Did you try to download it again? I would try that first.
Gesendet von meinem P6-U06
Yes I can start phone normally just when I go to recovery I couldnt flash any original firmware because it always crash on the Check modul Fastboot. I try to flash recovery by fastboot and it is still doesnt work. Of course I try download it again, I try B132 too and it still doesnt work.
Odoslané z HUAWEI P6-U06 pomocou Tapatalku
Are you still on TWRP/CWM? If you are, flash stock recovery first.
Sent from my P6-U06 using Tapatalk
I have stock recovery.
Flash TWRP, flash Surdu's B506, then flash GApps
Sent from my P6-U06 using Tapatalk
This method worked for me.I had in my p6 the chinese B507 firmware with stock recovery and no root..I believe that with B506 is tha same way..(Do it with own risk..)[/B]
Ok..Lets begin..
a) Download P6 B510 Official zip
b) Download P6_Unicom_EMUI2.0.zip
c) Download P6 B132 Official zip
The steps
1)Do a factory reset(I dont know if that is necessary but i did it)
2)Install P6_Unicom_EMUI2.0.zip via Local Update(Extract dload folder in internal storage)
3)Install P6 B132 Official zip via Local Update (Extract dload folder in internal storage)
4)Rename the B510 zip to update zip and install direct the update zip again via Local Update(Don't extract anything from this)
5)Do a factory reset again if you have problem with batery drain or something else(Of course is optional)
This is the process that i follow without any problems
I couldn't post the downloads sites because is my first post
Sorry for my English..
Where do I download the required files?
simthanasis said:
This method worked for me.I had in my p6 the chinese B507 firmware with stock recovery and no root..I believe that with B506 is tha same way..(Do it with own risk..)[/B]
Ok..Lets begin..
a) Download P6 B510 Official zip
b) Download P6_Unicom_EMUI2.0.zip
c) Download P6 B132 Official zip
The steps
1)Do a factory reset(I dont know if that is necessary but i did it)
2)Install P6_Unicom_EMUI2.0.zip via Local Update(Extract dload folder in internal storage)
3)Install P6 B132 Official zip via Local Update (Extract dload folder in internal storage)
4)Rename the B510 zip to update zip and install direct the update zip again via Local Update(Don't extract anything from this)
5)Do a factory reset again if you have problem with batery drain or something else(Of course is optional)
This is the process that i follow without any problems
I couldn't post the downloads sites because is my first post
Sorry for my English..
Click to expand...
Click to collapse
Where can I find the P6_Unicom_EMUI2.0.zip file?
jeswinsimon said:
Where can I find the P6_Unicom_EMUI2.0.zip file?
Click to expand...
Click to collapse
h**ps://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
It works
Hi
I have just updated form 507 to 510, it works :good:
I do not know if this is for all, but be aware that after i installed the B132, i had to wait a looooong time before it restarted.
When this step was done it automatically found the new version
René
Yes it takes some time to restarting.
dont neet to wait long time for start b132 after flash it
amja said:
Hi
I have just updated form 507 to 510, it works :good:
I do not know if this is for all, but be aware that after i installed the B132, i had to wait a looooong time before it restarted.
When this step was done it automatically found the new version
René
Click to expand...
Click to collapse
hello friend
i test this way and work fine
just you dont need long time for start b132 . just take out sdcard and put b510 UPDATE.app in dload folder
and keep volome bottom and power until boot to recovery and install atumatilacy b510 and start soon after flash
sorry for my english
Restart times
hey guys, i just installed the b132 and the phone restart takes a looooooong time. Allready 25 minutes and still running ??
Syntheciser said:
hey guys, i just installed the b132 and the phone restart takes a looooooong time. Allready 25 minutes and still running ??
Click to expand...
Click to collapse
That's too long, force restart.
Bootloop ?
So, now i tried a restart but i think the p6 stucks in a bootloop. It stoped at the huaei logo -.-
Any ideas to get the phone now running on b510 ??
Thanks guys
Syntheciser said:
So, now i tried a restart but i think the p6 stucks in a bootloop. It stoped at the huaei logo -.-
Any ideas to get the phone now running on b510 ??
Thanks guys
Click to expand...
Click to collapse
Take out your sdCard, re-unpack the download you are using...sounds like it didn't unpack properly....put the update.app back in your sdCard in the dload folder, and restart your phone.
It does take a long time to boot and load but 25mins is to long. At most 10.
And don't worry, I've discovered that it's pretty difficult to brick this phone.
Sent from my HUAWEI P7-L10 using XDA Premium HD app
Thanks
so, now it works on b510. Thanks a lot for the help. I flashed the rom again and the p6 starts normal
hey, thanks for this explanation i was searching for this!
just one question before i can start where can i download the 'P6 B132 Official zip' file?
Hope this is going to work out!
vb_sven said:
hey, thanks for this explanation i was searching for this!
just one question before i can start where can i download the 'P6 B132 Official zip' file?
Hope this is going to work out!
Click to expand...
Click to collapse
From here : HUAWEI Ascend P6 : B132 Official Firmware
boot loop
hi again,
I'm having problems with restarting after updating (downgrading) to b132, i'm stuck at booting (huawei sign keeps loading) and don't have a clue how to get the phone working again, can someone explain in simple terms? #freaking out
thx
vb_sven said:
hi again,
I'm having problems with restarting after updating (downgrading) to b132, i'm stuck at booting (huawei sign keeps loading) and don't have a clue how to get the phone working again, can someone explain in simple terms? #freaking out
thx
Click to expand...
Click to collapse
hi you dont need to wait
just put out sdcard and place b510 update.app in dload folder and put in ur phone
now keep volome up and down and press power botton and wait until start flashing in stock recovery
vb_sven said:
hi again,
I'm having problems with restarting after updating (downgrading) to b132, i'm stuck at booting (huawei sign keeps loading) and don't have a clue how to get the phone working again, can someone explain in simple terms? #freaking out
thx
Click to expand...
Click to collapse
It happens sometimes. Just make sure you have the B132 (if that's what you want to flash back to) or the B510 (if that's where you're going) update.app in the dload folder in your sdcard and restart your phone.
Both take a while to get done so be patient. If it takes more than fifteen minutes however, restart your phone again. Make sure you have a full battery.
Sent from my HUAWEI P7-L10 using XDA Premium HD app
still having problems...
Sorry to bother you guys again, but i seem to keep failing in this normally 'simply task'...
See attachment for phone stats
So this is what i do:
1) downloaded the B510 from here: h**p://huaweinews.com/2014/06/ascend-p6-b510-official/
2) unpack the zip file (update.app, cust, meta-ing, patch, system are inside the folder)
3) I copy the update.app and paste it in dload on my external sd-card (transferring trough usb cable)
4) I'll go to the update app and click 'update from local'
5) There comes a pop up that mentions -shutting down- behind it I see a other pop-up telling -wrong- can't read the rest since it is behind the shutting down pop up...
6) applying update:
-checking sd update pkg...
-huawei sd card update fail.....
-cust copying files...
-copy cust files successed
FAIL
Does somebody know what i'm doing wrong? Would be really Thankful!!!
@kolembo ?
vb_sven said:
Sorry to bother you guys again, but i seem to keep failing in this normally 'simply task'...
See attachment
Click to expand...
Click to collapse
Well done actually!! All your steps are correct, and it's very easy actually!
You're on B111! Find B125 (Huawei news or Huaweiblog), repeat exact same steps.
Then do the same with the B510 update, you'll have no problem. And you're lucky the update REALLY rocks when you take it all the way from the original B111.
Enjoy, and let us know. One thing - I found that with B510 they remove the colour temperature slide from the settings menu.
I love my screen crystal clear and cool so I set mine on max cool and then flash B510.
So take a look at that and set to your taste beforehand. Onward!
Sent from my HUAWEI P7-L10 using XDA Premium HD app
finally!
kolembo said:
Well done actually!! All your steps are correct, and it's very easy actually!
You're on B111! Find B125 (Huawei news or Huaweiblog), repeat exact same steps.
Then do the same with the B510 update, you'll have no problem. And you're lucky the update REALLY rocks when you take it all the way from the original B111.
Enjoy, and let us know. One thing - I found that with B510 they remove the colour temperature slide from the settings menu.
I love my screen crystal clear and cool so I set mine on max cool and then flash B510.
So take a look at that and set to your taste beforehand. Onward!
Sent from my HUAWEI P7-L10 using XDA Premium HD app
Click to expand...
Click to collapse
Hey, thank you so much!!! where can i send my gratitude to? haha
Worked
simthanasis said:
This method worked for me.I had in my p6 the chinese B507 firmware with stock recovery and no root..I believe that with B506 is tha same way..(Do it with own risk..)[/B]
Ok..Lets begin..
a) Download P6 B510 Official zip
b) Download P6_Unicom_EMUI2.0.zip
c) Download P6 B132 Official zip
The steps
1)Do a factory reset(I dont know if that is necessary but i did it)
2)Install P6_Unicom_EMUI2.0.zip via Local Update(Extract dload folder in internal storage)
3)Install P6 B132 Official zip via Local Update (Extract dload folder in internal storage)
4)Rename the B510 zip to update zip and install direct the update zip again via Local Update(Don't extract anything from this)
5)Do a factory reset again if you have problem with batery drain or something else(Of course is optional)
This is the process that i follow without any problems
I couldn't post the downloads sites because is my first post
Sorry for my English..
Click to expand...
Click to collapse
Thank you, I did this (after soft bricking b132 i managed to do a factory reset then install the new firmware and now my P6 is running fine
Since everybody knows how to upgrade OTA or from LOCAL UPGRADE and go from 4.2 to 4.4 I've decided to let you know how to easily downgrade from 4.4 to 4.2 AND / OR change from Chinese to International Huawei Firmware!
The method I describe here, I've found in some German forums after long search. It really works! 100% tested on my device Ascend P6-U06!
!!! CAUTION !!!
Before you begin, you must be sure you have STOCK recovery, NOT TWRP one!!! This flashable files work and can be flashed only thru STOCK recovery!
If you have TWRP recovery and don't know how to go back to STOCK one, look the SECOND POST in THIS thread and follow the steps there, before you begin this procedure! ONLY after you're done with turning back your STOCK recovery and you're sure of that, you can continue with the following steps:
To Downgrade from Android 4.4 to Android 4.2 / Switch from Chinese to International ROM, do the following:
1. Download this (Unicom 2.0 Downgrade Flashable ZIP) and flash it thru STOCK RECOVERY - https://mega.co.nz/#!ZYVixBqa!JNMLRB2DUVKlGpZVqPJbIsdbVPijks7r1Mtk46KGrmE
This is a 240MB archive, also known as Unicom 2.0 - something like ROM, but it is not an entire ROM, but just part of it, that must be flashed thru stock recovery. You must unzip it, take the dload folder that is inside and put it on you sdcard. Than you can flash it like a local update thru the updater, or you can forcefully flash it - pres power+ volume down+ volume up and it will take you directly to flashing updates thru stock recovery. When you flashed it, you can once again boot normally into you Android device. Now you must take dload folder from the B132 zip (from the link below), once again put it on your sdcard and flash it again using the same methods again thru stock recovery. The cool thing is that the first little flashable zip allows you not just to downgrade from 4.4 to 4.2, but also change from China to International ROMs. So when you're finished flashing this thru stock recovery, flash the official international B125 or B132, wait for the system to install and boot into android. When it is finally booted, you can flash B510 or B512/513 - whatever you want. In my case when I downgraded to B132, after the first boot the system prompted me, that it can be updated directly to B520 OTA. I've updated and now I am once again with International firmware
2. Download this (B132 International 4.2 Firmware) and flash it thru STOCK RECOVERY ONLY if you already flashed the file in the step above! - https://mega.co.nz/#!5JkAzKpB!nFqfHIHfWo6EO4XPqjO3Gga6a3XWWnqqZxZDZpzAdWE
3. Boot into Official Huawei Android 4.2 firmware and check for update OTA. If you have one - install it. If you don't - you can flash B510 or B512/513/etc...
Enjoy International firmware line again! This method can also be used just to downgrade form Android 4.4 to Android 4.2!
Files are not flashable thru TWRP - please, use ONLY Stock Recovery!
------------------------------------------------------------------------------------------
Please, hit THANKS, if this thread helped you!
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
blueIBI said:
question: which stock recovery should i take if i have b635 (there is no available official b635 rom - only repack)..
i want to downgrade because i want to get the b520 fw..
maybe you have an advice..
thanks in advance..
Click to expand...
Click to collapse
Just try with the stock B510 recovery from the second post in the TWRP recovery theme! I think stock recovery is the same for all 4.4 ROMs and it doesn't matter which one. I recommend the one that I told you about! Should work! I was with Chinese B706 ROM and TWRP. To downgrade I've flashed the B510 stock recovery first and then - step by step as I wrote above.
thanks..will try to do that..
blueIBI said:
thanks..will try to do that..
Click to expand...
Click to collapse
I have a question for you - I see that you modified the .prop file for the local channel, to get louder sound in headphones (from your signature). I've tried to do this today, but when I try to modify the file every time it says - cannot save changes, file cannot be modified, changes not saved! I have root and I've mounted / and /system as writable! I can edit build.pro without any problem and save the changes, but this file - I can't! How did you edited it and how can I edit it too?
Thank you!
UP!
Moderators, please consider to make this thread sticky / important! Thank you!
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
blueIBI said:
did not work for me..
i made the following:
flashed stock recovery from b510
took a fresh 4gb sdcard with dload folder on it..inside this folder was the update.app from the unicom rom..
then turned off device..
then pressed power,vol + & - together and held it 'til the recovery screen with yellow writing appeared..
it started to flash..but on the point where the verlist check begins it tells me "fail"!!!..
so what to do now???
i know this procedure..did it with the b506 rom and it worked..but with the b635 rom it won't work..
Click to expand...
Click to collapse
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
blueIBI said:
got it..
i just had to flash the b125!!!
so easy..i just flashed the stock recovery of b510..made a force update with the b125 (not the p6 unicom 2.0!!!!)..and now i just upgrade my p6 to b520 via OTA!!!
thanks for your help and time!
Click to expand...
Click to collapse
You're welcome!
ThunderBird891 said:
Try to flash B706 Chinese EMUI 3.0 new Development edition ROM from the official Huawei web site. If you flash it over the B635 successfully, then you must be able to do this procedure to turn back into international line of ROMs and to B132 4.2 ROM. after that you can flash B510 again. Try this method! I'm pretty sure that it will be possible to flash B706 directly over B635, even than that in the official website it is recommended to update only from B508SP02 official chinese rom. I had success with updating directly to B706 from B512, but if you can't go from B635, try to flash B508SP02 first, than B706 and than downgrade! Should work! Good Luck!
Click to expand...
Click to collapse
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
macklon said:
You installed the b706 on b512 ??
Why did they say that to upgrade only on b508
After installing are you facing any problems
Plz reply
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
ThunderBird891 said:
No. No problems at all. I think just the upgrade took a little while that usual but it flashed like charm over the B512 without any problems! I think the flashing from B508 is just a recommendation, because the B508SP02 is the latest chinese ROM, and this B706 is Chinese developers edition...
Click to expand...
Click to collapse
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
macklon said:
So from b512 to b706 with dload and update
Sent from my HUAWEI P6-U06
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
Which Rom are you using pltl
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
That's right! Download the official B706 from Huawei EMUI website, unzip it, put the dload folder in you sdcard and then i recomend to make Local update first. If it doesn't want to update thru local update option in the Update Application, then try with forceful update - press and hold power + volume up + volume down and wait until phone boots into stock recovery mode! The update can only be done with stock recovery! If you're on TWRP, that you must go back to stock!
**** uc browser sucks
I kept to download b508 due to some problem I have to pause it only 36mb was remaining and when I resumed it showed a error was not able to resume the download so I re downloaded the b508 it got downloaded now
So kept to download b706 the same thing happened only 50mb was remaining for the download to complete it showed a error again but this time I did even pause ****
And now someone told me we can update b706 on b512 no need of b508 ****
Today ill download b706 on chrome
Sent from my HUAWEI P6-U06
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
gabrymed said:
Hi,in my Huawei Ascend P6-U06 i installed firmware B513+EMUI 2.3.
I tried to downgrade with this method but it fails when i flash Unicom 2.0 (i follow the instructions:download it..unzip then put UPDATE.app in dload folder of my sdcard).When i flash it,itfails(i have Stock Recovery,never installed TWRP).
Is this method valid also for B513+EMUI2.3?Or maybe i've done something wrong?
Any help is very appreciate..Thanks
Click to expand...
Click to collapse
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
ThunderBird891 said:
Try to flash it forceful with holding all buttons together, or try to copy not only the update.app, but the whole dload folder from the archive. If it's not working, just try to flash B510 or B512 on top of B513 - this should work. After that you can try to downgrade to 4.2 again with the same method!
Click to expand...
Click to collapse
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
gabrymed said:
Thanks for your help!
Cause i'm a newbie,i explain you step by step what i've done:
I follow carefully your instructions(part 1),i try to flash it with local update,but i get message "fail"
After that,in stock recovery,i didn't reboot,but i move to option "apply update from external storage" and after a few seconds i have messages:
-wiping cache (at package request)...
-formatting cache
-cache wipe complete
-install from sd card complete
-cust copying files
-copy cust files successed!
It means that the process has been successful ??? If yes then i proceed to downgrade...
If no,i'll try with your advice to flash B510 or B512 on top of B513...
Click to expand...
Click to collapse
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
ThunderBird891 said:
The process is successful! You must now reboot an go in your android. Now you can copy the other firmware (b510) to your dload folder in sdcard and then try to downgrade! It should work fine!!!
Click to expand...
Click to collapse
Ok,downgraded with success! Now i receive an OTA upgrade to western europe B520 but i think i'll wait for the moment...
Thanks ThunderBird for your help,very appreciate!
hi guys...
i tried for several times to downgrade my p6-u06 with b635 rom (official updated through OTA)..
of course i rooted my device with twrp 2.8.0.0..
as far as i know i have to put back a stock recovery (i took the b510 recovery - extracted with the update extractor)..
then the ways are often described in this great forum (i have done this once when i had installed the b506 cn rom - there the procedure was successful:
take the P6 unicom 2.0 rom in a dload folder on sdcard..turn off phone..push all three buttons (force update)....then take a JB rom (b125 or similar) and flash it..
well..
i can't even flash the unicom thing..it always stucks and aborts at verifying the verlist..
some of you tried to help..thanks..but at the moment i wasn't succesful..
i tried to flash the b706..but this won't even start (what i read is that the b508sp02 rom is needed - can't download it - would take 2days O.O)..
but what do i have to do when this fails too??
the b635 is a nice and smooth rom, but well, i want to test the b520 rom and in future the new ones with emui 3.0 (when they will be released)..
so if anyone has an idea, please share it with me..
me again..
the solution is so simple....
you won't believe it..
if you are on the b635 rom and want to go back to b125 ( that is what i did)..
just put on a stock recovery (from b510)..then put the update.app from b125 on the sdcard in dload folder..
turn off device..
make a force update (power & vol- & vol+ together)..
it should start automatical to check & write..
after some minutes you have (hopefully) a functional b125 again..
Today I managed to screw up my phone when I tried to downgrade from the kit kat version to the jellybean one.
The phone currently has no OS , and its stuck at the android ascend logo.
I tried to force update it , but without success.
I've wiped the cache , i've formatted the sd card , but without success.
Yes , i've put the dload folder into the sd card root with the update.app file in it. After the 3 button attempt , it goes into checking the modules , failing at VERLIST.
Any help would be apreciated for a noobie like me.
Vlad Cristea said:
Today I managed to screw up my phone when I tried to downgrade from the kit kat version to the jellybean one.
The phone currently has no OS , and its stuck at the android ascend logo.
I tried to force update it , but without success.
I've wiped the cache , i've formatted the sd card , but without success.
Yes , i've put the dload folder into the sd card root with the update.app file in it. After the 3 button attempt , it goes into checking the modules , failing at VERLIST.
Any help would be apreciated for a noobie like me.
Click to expand...
Click to collapse
Are you able to flash custom recovery? If you are able that try flashing some custom Roms.... one more thing, try flashing B132 with 3 buttons method.
Sent from my HUAWEI P6-U06 using XDA mobile app
AdnanCG said:
Are you able to flash custom recovery? If you are able that try flashing some custom Roms.... one more thing, try flashing B132 with 3 buttons method.
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
I flashed the B132 with the 3 buttons method and this happened :
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
The loading bar isn't moving , and its been sitting like this for 25-30 min.
The phone is not connected to a pc or laptop , it's just charging.
How does custom recovery actually work ?
Vlad Cristea said:
I flashed the B132 with the 3 buttons method and this happened :
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is UNLOCK state.
The loading bar isn't moving , and its been sitting like this for 25-30 min.
The phone is not connected to a pc or laptop , it's just charging.
How does custom recovery actually work ?
Click to expand...
Click to collapse
Remove the charger. It thinks that it's connected with a USB cable.
miz_pimp said:
Remove the charger. It thinks that it's connected with a USB cable.
Click to expand...
Click to collapse
I tried that , and its back to the VERLIST error.
So far I have tried B112 , B132 and B520 . All of them via 3 button method.
Vlad Cristea said:
I tried that , and its back to the VERLIST error.
So far I have tried B112 , B132 and B520 . All of them via 3 button method.
Click to expand...
Click to collapse
Which firmware did you have on your device before? If it was any of the B7xx firmwares, then you need to follow the downgrade method for those firmwares. You'll just need to search for the guide.
miz_pimp said:
Which firmware did you have on your device before? If it was any of the B7xx firmwares, then you need to follow the downgrade method for those firmwares. You'll just need to search for the guide.
Click to expand...
Click to collapse
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).
Vlad Cristea said:
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).
Click to expand...
Click to collapse
My suggestion is that if you still have stock recovery that you try to flash B708 firmware (chinese) one, through update.app process and see if it turns up the error again.
Sent from my SM-G850F
Vlad Cristea said:
I can't remember exactly which one , it was the latest kit kat version that came preinstalled with some chinese apps ( I had to install google play store myself ).
Click to expand...
Click to collapse
Ok, I'm assuming you had B708 installed.
You say that you don't have an OS installed, but that can't be if you only had the stock recovery on your device. You say that you've wiped cache, and SD card, but have you done a factory reset?
I've had my device stuck on the ascend logo before, and wiping data worked for me. Please try that, and let me know if your phone boots up. Then you should find the downgrade method from B708 back to either Jelly Bean or the international Kit Kat firmware.
tileeq said:
My suggestion is that if you still have stock recovery that you try to flash B708 firmware (chinese) one, through update.app process and see if it turns up the error again.
Sent from my SM-G850F
Click to expand...
Click to collapse
Took me 4 bloody hours to download it from Huawei's website...Those chinese servers are incredible sometimes.
miz_pimp said:
Ok, I'm assuming you had B708 installed.
You say that you don't have an OS installed, but that can't be if you only had the stock recovery on your device. You say that you've wiped cache, and SD card, but have you done a factory reset?
I've had my device stuck on the ascend logo before, and wiping data worked for me. Please try that, and let me know if your phone boots up. Then you should find the downgrade method from B708 back to either Jelly Bean or the international Kit Kat firmware.
Click to expand...
Click to collapse
I forgot to mention I tried a factory reset too , but without success.
It seems that version worked ! It passed every module and installed. I'd like to thank you both for your help , you'd been epic !
Im glad that ive been of any help.
Sent from my SM-G850F