Related
Keep the kernel that came with CyanogenMod 6.0.1 or use a different one, that is the question.
Please discuss below.
skrowl said:
Keep the kernel that came with CyanogenMod 6.0.1 or use a different one, that is the question.
Please discuss below.
Click to expand...
Click to collapse
I didn't know there was custom kernels for CM?
Please fill me in hell yeah
ACD168 said:
I didn't know there was custom kernels for CM?
Please fill me in hell yeah
Click to expand...
Click to collapse
He didn't mention custom, he said the one that came with it. I'm actually thinking the same question. Anyone?
ya... name one other one that works with CM6??????
ACD168 said:
ya... name one other one that works with CM6??????
Click to expand...
Click to collapse
If none of the other kernels work, I suppose that answers my question. I was under the impression that you could use any kernel with any rom.
skrowl said:
If none of the other kernels work, I suppose that answers my question. I was under the impression that you could use any kernel with any rom.
Click to expand...
Click to collapse
Nooooo. Most kernels will list ROMs they were tested on to determine compatibility and stability...
For instance, KingxKlick's kernels are specifically meant for 2.2 Sense ROMs, no others i.e. CM6...
I mean you can always try kernels I guess. I mean that's what nandroid is for, right
There is no other kernel that works with CM6.
jtcarnes said:
There is no other kernel that works with CM6.
Click to expand...
Click to collapse
Thank you.
I used to be able to run hydra kernels on CM for 2.1...
ACD168 said:
Thank you.
I used to be able to run hydra kernels on CM for 2.1...
Click to expand...
Click to collapse
yeah me too on the very early cm6 nighties.
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
grainyrice said:
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
98% Sure you are trying to mix an AOSP based ROM with a TW (Stock) type Kernel. That doesn't typically work. There is an option for the AOSP version of Ktoonsez kernel though that _should_ be a better fit with that ROM.
Have fun and continue to read up *Grin*
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
grainyrice said:
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
Click to expand...
Click to collapse
That's a good start, the AGAT says LJ7 based in the Post, leading one to believe it is for TW ROMS. And on the Ktoonsez it does have a download link for either TW or AOSP. One you are looking for should be named "KT747-Kernel-AOSP-JB-SPR-12-11-2012.zip". Verify that and speak up again if you are still having issues.
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
grainyrice said:
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
Click to expand...
Click to collapse
Reading your original post, The order should go 1) ROM then 2) Kernel ... Then Wiping Cache and Dalvik-Cache (And other wipes if needed). Reason for this is if you flash the Kernel first, then the Rom you are over writing the custom Kernel with whatever is packaged with the ROM.
That is the only other obvious thing I see at this point. Hope that helps..
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
pastert33 said:
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
See that now, thanks and sorry for the inconvenience.
Please report back on how you like it, and if you really notice any differences.
It dropped 1% in approximately 30 minutes, half of the time the screen was just on, other half I left it on my desk (all while connected to Wifi).
My settings are 96/1998 on ktoonservative.
In my opinion, so far its amazing as compared to other AOSP roms I've tried.
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
panoramix30 said:
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
Click to expand...
Click to collapse
If your using the I9300, i would check the thread for that phone. Otherwise you risk bricking it flashing something from this one.. This is for the US Variant SPH-L710.
Go here for all the I9300 stuff, Please save yourself a bricked phone. Thanks! http://forum.xda-developers.com/forumdisplay.php?f=1563
Will do, thank you!
Sent from my GT-I9300 using xda app-developers app
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
First of all. This is development section. Not big problem section.
Secound. Not exactly sure which kernel you mean, but if you are going to flash one and the same Kernel on ICS and JB then you will have problems.
And last but not least. If you don´t read the forum rules, nor for which ROM the kernel you are using is supposed to be, you will get even bigger problems.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
It's a known issue caused by your display. It affects CM10.1 and CM10. It's a kernel issue. Please try to use the General section for such topics.
Sent from my GT-I9195 using Tapatalk 4
arsradu said:
It's a known issue caused by your display. It affects CM10.1 and CM10. It's a kernel issue. Please try to use the General section for such topics.
Sent from my GT-I9195 using Tapatalk 4
Click to expand...
Click to collapse
Maybe I understood this wrong, but as you say it is only related to CM10+ ROMs. But if he is saying he is having the same issue with a CM9 based ROM, there is only one possibility to get it there. This is by flashing a CM10 based kernel onto a CM9 based ROM.
ckckckckkc,
read first post in every thread u visiting carefully dude.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
just have to say one thing. the white screen issue was fixed already on a certain 10.1 kernel.
honeyx said:
Maybe I understood this wrong, but as you say it is only related to CM10+ ROMs. But if he is saying he is having the same issue with a CM9 based ROM, there is only one possibility to get it there. This is by flashing a CM10 based kernel onto a CM9 based ROM.
Click to expand...
Click to collapse
I don't think you can use such combination. Never tried but I don't think you can boot up like this.
So anyway, this is not a rom issue. Maybe I misunderstood. But the best way to avoid these issues is by making a clean installation of the ROM. Always.
Sent from my GT-I9195 using Tapatalk 4
arsradu said:
I don't think you can use such combination. Never tried but I don't think you can boot up like this.
So anyway, this is not a rom issue. Maybe I misunderstood. But the best way to avoid these issues is by making a clean installation of the ROM. Always.
Sent from my GT-I9195 using Tapatalk 4
Click to expand...
Click to collapse
I tried it already and it worked. Just this will break a lot of things or make them not to work correctly. So either he flashed the CM10.1 kernel after reverting back to the ICS based OneOfAKind ROM, or simply flashed this rom over the AOIP without doing a clean installation.
Either way. This is not a reason to start a new topic about his issue in the development section. This is a kind of ignorance by not following the forum rules, not reading the installations instructions and not posting into the correct threads just to get more attention.
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Any links?
Sent from the TermiNOTEr 2!
borijess said:
Any links?
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Here is a screenshot of my system.
razvan11malancus said:
Here is a screenshot of my system.
Click to expand...
Click to collapse
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
borijess said:
Ok that's 4.1.2 don't get it. Thought you had 4.3 touch wiz.
Sent from the TermiNOTEr 2!
Click to expand...
Click to collapse
Yes. My actual ROM is 4.1.2. I have tried Jedi X19 (4.1.2) and also BeanStalk, Illusion, CM 10.2 (4.3), with the same result. Stuck at boot screen logo.
Ni hao
razvan11malancus said:
Hi guys!
First of all I am sorry for posting in this forum but I believe Korean Note 2 is similar in many aspect to N7105 and also there are devs who can read and maybe come up with something.
I have a question for you. Has anyone tried an Android 4.3 custom ROM on e250s (Korean Note 2) ? I am currently on 4.1.2, a combination of Milan 3.0 and Milan 4.0 (I think this ROMs are also for N7105 because in About device section my phone appears to be a N7105 after flashing), with some stock kernel and cwm. I have tried a few 4.3 ROMs for N7105 (CM 10.2, Beanstalk, Illusion) but all get stuck at the boot logo (Samsung Galaxy Note 2). I even tried different kernels, compatible with 4.3 (SJKernel and NeKo) but again, with no luck.
Do you have a solution, link, idea?
Thanks in advance guys!
Click to expand...
Click to collapse
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Vibration issue
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
razvan11malancus said:
Hi guys!
Is anyone else having issues with vibrations when using a N7105 ROM (with Android 4.2.2 or 4.3)? I mean the phone does not vibrate at all.
Do you know a fix or something?
Thanks!
Click to expand...
Click to collapse
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
cbeta1111 said:
bbs.gfan.com/forum.php?mod=viewthread&tid=5919447&extra=page%3D2
Click to expand...
Click to collapse
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
razvan11malancus said:
Thanks.
I have finally installed 4.3 ROM after flashing a file that converts the kernel to e250s.
Click to expand...
Click to collapse
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Rajaasim1980 said:
what is that?
Cannot read chinese
can you give us link of downalod?
I own note 2 e250 s
---------- Post added at 02:55 AM ---------- Previous post was at 02:53 AM ----------
which 4.3 ROM did you installed and how?
can you tell us bit more about converting kernels
Click to expand...
Click to collapse
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
cbeta1111 said:
Use AOSP e250s Thor's kernel (update-0.27-aosp-KO-LTE-e250s-lsi-n7100.zip)
download:
mediafire.com/folder/41s5eea1er9dt/0.27
original thread:
forum.tegraowners.com/viewtopic.php?f=41&t=872
Click to expand...
Click to collapse
Thanks a lot man! It works now!
razvan11malancus said:
Hi. This is the link to the boot converter.
http://forum.xda-developers.com/showpost.php?p=36885456
All you have to do is flash this zip file from cwm after you first flash the ROM.
I have tried Illusion and PAC-MAN ROMs (N7105, Android 4.3) and also MIUI v5 for N7105 (Android 4.2.2) and all work fine.
There may be some ROMs (PAC-MAN) that give you "error 7" when flashing. You have to change the first line from META-INF/com/google/android/update script.
How I do that. I prefer to change the ROMs extension from zip to apk, then unzip it using APK Tool and go to the file, change extention to .txt and delete the first line (the one that starts with assert), thus the first line becoming the one with "show progress" or "mount". After that I zip it again with APK Tool and sign the ROM with ApkSign. I do not know why, I cannot sign it with APK Tool. After that, the flashing process should go fine. You have to install the right GApps for the ROM you are being flashing and then the boot converter from the link.
The only issue I have found was the absence of vibrations, but I managed to get it back by flashing Thor Kernel for Note 2, like cbeta1111 and eggymustdie told me. So huge thanks to them.
Good luck! Hope you will manage to install the desired ROM. In my opinion, PAC-MAN ROM is the best so far, with many, many options from CM, AOKP and Paranoid Android ROMs.
Click to expand...
Click to collapse
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
This is dev forum, not Q&A. All questions should go in questions forum.
Rajaasim1980 said:
Thanks for detail response
I am using TWRP touch custom recovery. would this process work for TWRP?
I did not get second part about changing first line from META-INF/com/google/android/update script. where is that? You mean first line of custom 4.3/4.2 ROMs we are going to install?
and also do call recoding work in 4.3/4.2 PAC ROMS because i actually use this function and multi windows ?
Click to expand...
Click to collapse
Hi. It should definitely work with TWRP recovery as it installs like a normal zip file ROM.
The update script file is located in the ROM. You have to unzip it and go to that location as I have said in the anterior post.
Call recording works but I did not figured yet how to play the file after it is saved. It saves the file as a .3gpp but I think the problem is with Android 4.3 codecs.
EDIT: It works if you try to play it from the built in file manager. Not with Root Explorer. Do not know why.
Multiwindows work great in PAC-MAN ROM:
TheATHEiST said:
This is dev forum, not Q&A. All questions should go in questions forum.
Click to expand...
Click to collapse
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
razvan11malancus said:
Sorry, I know that this section is for developers only but I think it has more visibility here. It wont happen again.
Click to expand...
Click to collapse
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
TheATHEiST said:
That is an extremely bad excuse. What on earth do you think the dev forums would look like if everybody just decided to post non-relevant topics anywhere they wanted to?
Click to expand...
Click to collapse
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Rajaasim1980 said:
Are you moderator or what?
Leave it for them to.move or delete
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
Errr I did! and they have!!!!!
Doesn't mean I cant voice my opinion (Same as you did) as well as report post!
hello. recently updated by my I747 custom recovery NE4 to mj1. since I updated, is giving me problems signal, it overheats and few things more. I feel that this upgrade is giving me problems. my question is? I can go back to the stock rom NE4? and if you can, how serious the procedure?
ltindi32 said:
hello. recently updated by my I747 custom recovery NE4 to mj1. since I updated, is giving me problems signal, it overheats and few things more. I feel that this upgrade is giving me problems. my question is? I can go back to the stock rom NE4? and if you can, how serious the procedure?
Click to expand...
Click to collapse
if your bootloader/modem is nj1 , which i assume you mean by recovery , you cannot downgrade !! it will brick your phone. perhaps using a custom kernel would help.
"all i can really do , is stay out of my own way and let the will of heaven be done"
thx. in that area I can get a custom kernel with support nj1?
mrrocketdog said:
if your bootloader/modem is nj1 , which i assume you mean by recovery , you cannot downgrade !! it will brick your phone. perhaps using a custom kernel would help.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
thx. in that area I can get a custom kernel with support nj1?
yes , just search the forums.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
yes , just search the forums.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
thanks
ltindi32 said:
thx. in that area I can get a custom kernel with support nj1?
Click to expand...
Click to collapse
One thing to keep in mind is that there are custom TouchWiz kernel and custom AOSP kernels. Don't put a custom AOSP kernel on a TouchWiz ROM, or vice versa. You can sometimes find both kernels in the same post if a dev maintains both. So pay attention to which you download based on the ROM you are running.
dawgdoc said:
One thing to keep in mind is that there are custom TouchWiz kernel and custom AOSP kernels. Don't put a custom AOSP kernel on a TouchWiz ROM, or vice versa. You can sometimes find both kernels in the same post if a dev maintains both. So pay attention to which you download based on the ROM you are running.
Click to expand...
Click to collapse
I am running stock rom rooted ucufnj1. you can with this rom?
ltindi32 said:
I am running stock rom rooted ucufnj1. you can with this rom?
Click to expand...
Click to collapse
Sure you can install a custom kernel.
The stock rom is a TouchWiz based rom, so you would want a TouchWiz (TW) kernel. You can find kernel threads in the dev subforum. I am using the kernel that came with my rom and have not experimented with it or any others. This leaves me with no recommendation as to what would be better for you. All I can say is read the threads and see which ones work with the stock ROM.
Have you check to see what is using the most battery during the times your phone is running hot? This may give you an idea of what is causing the problem.
dawgdoc said:
Sure you can install a custom kernel.
The stock rom is a TouchWiz based rom, so you would want a TouchWiz (TW) kernel. You can find kernel threads in the dev subforum. I am using the kernel that came with my rom and have not experimented with it or any others. This leaves me with no recommendation as to what would be better for you. All I can say is read the threads and see which ones work with the stock ROM.
Have you check to see what is using the most battery during the times your phone is running hot? This may give you an idea of what is causing the problem.
Click to expand...
Click to collapse
yes. I was very hot and the battery lasts me neither. thx