Hey all, long time lurk, first actual post here though. I used to jump rom to rom back when I had the original Droid on VZW, but that was so long ago, at least in terms of Android Development anyhow. So ffwd to today, I've had my E4GT now for perhaps 2 months, and I've already rooted it, flashed a Team Rouge Recovery to it (cause it was the latest I think), and am on a stock GB EL29 Rom, and I think an EL26 Kernel.
Now, I know that things have complicated so much more since the last time I was savy doing all this, so I'm vague and still learning about all the different things that can be switched in and out, here and there. But I've been too caught up with all of the recent ICS issues that were presented with the leaks and the actual release. I've since found a rom that I'm comfortable with, AOKP 7-13 , but I'm not trying to mess anything up despite having done nothing but read for the past month and a half about what to do and not to do. One thing I am absolutely sure about is that I came into this scene at a horrible time lol, things have been changing as I read them!!
Now! With this rom, is it completely nessasary to use this specific recovery, CWM5? And, is this the recovery in question? If not, please point me in the correct direction.
And "the normal route" that is mentioned in the first information post in that AOKP thread, would that be the flashing of an ICS rom from a GB rom to prevent the emmc problem that was happening, even though such this rom has that feature removed (at least if I read it correctly)
I'm not stupid nor am I completely horrible at following directions, but after feeling like getting the run around just by attempting to piece together information from different sources, it would really just put my mind at ease, and stop the headaches lol, if someone whom this wasn't so...new to could provide me an outline to follow, or at least do this, don't do that pointers.
I know this is long, and thanks for reading. I'm just hoping to get back into the scene, I hate being anxious and not know, <-- ie. my current state
mosez.315 said:
Hey all, long time lurk, first actual post here though. I used to jump rom to rom back when I had the original Droid on VZW, but that was so long ago, at least in terms of Android Development anyhow. So ffwd to today, I've had my E4GT now for perhaps 2 months, and I've already rooted it, flashed a Team Rouge Recovery to it (cause it was the latest I think), and am on a stock GB EL29 Rom, and I think an EL26 Kernel.
Now, I know that things have complicated so much more since the last time I was savy doing all this, so I'm vague and still learning about all the different things that can be switched in and out, here and there. But I've been too caught up with all of the recent ICS issues that were presented with the leaks and the actual release. I've since found a rom that I'm comfortable with, AOKP 7-13 , but I'm not trying to mess anything up despite having done nothing but read for the past month and a half about what to do and not to do. One thing I am absolutely sure about is that I came into this scene at a horrible time lol, things have been changing as I read them!!
Now! With this rom, is it completely nessasary to use this specific recovery, CWM5? And, is this the recovery in question? If not, please point me in the correct direction.
And "the normal route" that is mentioned in the first information post in that AOKP thread, would that be the flashing of an ICS rom from a GB rom to prevent the emmc problem that was happening, even though such this rom has that feature removed (at least if I read it correctly)
I'm not stupid nor am I completely horrible at following directions, but after feeling like getting the run around just by attempting to piece together information from different sources, it would really just put my mind at ease, and stop the headaches lol, if someone whom this wasn't so...new to could provide me an outline to follow, or at least do this, don't do that pointers.
I know this is long, and thanks for reading. I'm just hoping to get back into the scene, I hate being anxious and not know, <-- ie. my current state
Click to expand...
Click to collapse
Okay, first of all, AOKP already comes with a recovery (TWRP). However, if you would rather use clockworkmod then you can use this: http://tinyurl.com/7ysnylg Also, in any case where you want to flash a different ICS ROM, I suggest you use el26 CWM.
I'm aware of the TWRP that is included with the AOKP rom (listen to me, slinging around slang like a pro, lol) I only felt I needed to use CWM5 because it specified it in the instal instructions for the rom.
I would assume that I would need the CWM just for switching ICS's in the future, if that does turn out to be what I'll be doing, seeing as how ICS looks like it'll be nothing but improvements from here on oot.
mosez.315 said:
I'm aware of the TWRP that is included with the AOKP rom (listen to me, slinging around slang like a pro, lol) I only felt I needed to use CWM5 because it specified it in the instal instructions for the rom.
I would assume that I would need the CWM just for switching ICS's in the future, if that does turn out to be what I'll be doing, seeing as how ICS looks like it'll be nothing but improvements from here on oot.
Click to expand...
Click to collapse
Ooooh I get you! yes its best and suggested to flash any new ics rom from el29 stockrooted
Odin el29 stock rooted
Then flash el26 cwm kernel
Reboot to recovery then flash the ics rom
If your already on an ics rom MY method is to always Odin el29 stockrooted
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Righteo, that helps some. Now I just gotta back everything up. I made my original backup once I first rooted, I shouldn't need to make additional, right? You can find rooted, stock GB roms to go back to...right? Lol its late...I need another doobie :cyclops:
EDIT:
Actually, I'm already halfway through that. I am at el29, stock rooted. And I have the el26 kernel. I just need the CWM recovery, then the actual piece de resistance, the rom. Right Krazy?
mosez.315 said:
Righteo, that helps some. Now I just gotta back everything up. I made my original backup once I first rooted, I shouldn't need to make additional, right? You can find rooted, stock GB roms to go back to...right? Lol its late...I need another doobie :cyclops:
EDIT:
Actually, I'm already halfway through that. I am at el29, stock rooted. And I have the el26 kernel. I just need the CWM recovery, then the actual piece de resistance, the rom. Right Krazy?
Click to expand...
Click to collapse
http://chris41g.devphone.org/EpicTouch/Stock Repack/EL26/StockCWM-EL26.zip
That's the el26 kernel I use on GINGERBREAD
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
I was actually in a similar situation as you. I came from flashing on the HTC Hero(which is running AOKP at the moment, and I'm soon going to flash the new Jellybean rom that was just released for it), and that phone is completely different from the E4GT. Although i didn't start flashing from GB, I started on ICS.
I actually went from FF18 Stock Rooted to AOKP milestone 6 Friday the 13th using Agat's recovery from source, and it's a safe recovery, without problems. I am now loving AOKP
Sent from my SPH-D710 using xda app-developers app
What about the yellow triangle thing I have been reading about. What causes this and how do you prevent it? Its kind of confusing to me.
Blars1206 said:
What about the yellow triangle thing I have been reading about. What causes this and how do you prevent it? Its kind of confusing to me.
Click to expand...
Click to collapse
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I am looking to flash for the first time on this phone also, just got it a week ago. I came from the Vibrant which was so much more simple. Another question if you don't mind. I am on the now running stock OTA ICS. Do I just need to Odin a safe kernel then flash which ever ROM I choose or are the ICS kernels that are built from source now safe to flash from?
The kernels built from the source are safe. Agats kernel with recovery. You can flash that kernel being on stock FF18 and flash from there.
Edit: the agats kernel I have is for TW roms. So just do some research on what kernels you can use. (Cm9 and AOKP use different kernels.)
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
The kernels built from the source are safe. Agats kernel with recovery. You can flash that kernel being on stock FF18 and flash from there.
Edit: the agats kernel I have is for TW roms. So just do some research on what kernels you can use. (Cm9 and AOKP use different kernels.)
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I have done a ton reading, just stuck in the old ways of my old phone and simplicity of flashing on it. It was all a little confusing because even some of the updated ROM threads still say flash back to EL26 first, which is also a TW kernel isn't it? But then I read in another place it is safe to use Agats kernel built from source and so on. I was a little shocked at considerably less custom ROM options on this phone compared to the Vibrant. Granted the Vibrant has been around longer, but there were so many more options at the start which kind of leads me to think it is just that much more work to do that on this phone. By no means is this a negative remark toward any developer, just sort of expected a lot more because it is a nice phone. I was looking to flash the Platinum version of this rom http://forum.xda-developers.com/showthread.php?t=1712362 since I love the color red. But, thanks for help. I really appreciate it when someone actually gives an answer to a question instead of bash people new to a phone.
g_ding84 said:
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
And if I remember right, doesn't it only trigger if you flash an unofficial kernel through desktop Odin only? I know the Auto Root Package won't trigger it, and neither will Mobile Odin.
Sent from my SPH-D710 using xda app-developers app
EggosEvo said:
And if I remember right, doesn't it only trigger if you flash an unofficial kernel through desktop Odin only? I know the Auto Root Package won't trigger it, and neither will Mobile Odin.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Your correct only desktop triggers the yellow triangle.
Also just my steps to flashing roms 4 the e4gt
1. odin stock el29 rooted
2. flash the el26 cwm kernel (I provided on a few post back)
3. boot into recovery!
Flash what ever you want!
If you want to flash something else repeat those step! As you venture on you will get the hang of things! I hope!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Blars1206 said:
I have done a ton reading, just stuck in the old ways of my old phone and simplicity of flashing on it. It was all a little confusing because even some of the updated ROM threads still say flash back to EL26 first, which is also a TW kernel isn't it? But then I read in another place it is safe to use Agats kernel built from source and so on. I was a little shocked at considerably less custom ROM options on this phone compared to the Vibrant. Granted the Vibrant has been around longer, but there were so many more options at the start which kind of leads me to think it is just that much more work to do that on this phone. By no means is this a negative remark toward any developer, just sort of expected a lot more because it is a nice phone. I was looking to flash the Platinum version of this rom http://forum.xda-developers.com/showthread.php?t=1712362 since I love the color red. But, thanks for help. I really appreciate it when someone actually gives an answer to a question instead of bash people new to a phone.
Click to expand...
Click to collapse
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
krazy_smokezalot said:
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
I can vouch for AOKP M6. I have had two problems, both have fixed themselves(with time for the rom to settle in). Haven't tried Paranoid Android or CM9 yet. And I don't plan on it, as AOKP has everything I want in a rom.
Sent from my SPH-D710 using xda app-developers app
EggosEvo said:
I can vouch for AOKP M6. I have had two problems, both have fixed themselves(with time for the rom to settle in). Haven't tried Paranoid Android or CM9 yet. And I don't plan on it, as AOKP has everything I want in a rom.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
What! Never tried Paranoid Android!! Wtf were u been at under a rock:what: lol u think aokp is the shut!?? Well Paranoid Android ****s on AOKP IMO!!!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
krazy_smokezalot said:
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
I had all these on the Vibrant, but non are as stable as they were on the vibrant (as least by what I have read). AOKP would probably be my first choice because I am very familiar with Romanbb's work since he had a Vibrant at one time and is one of the best dev's.
krazy_smokezalot said:
What! Never tried Paranoid Android!! Wtf were u been at under a rock:what: lol u think aokp is the shut!?? Well Paranoid Android ****s on AOKP IMO!!!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
Paranoid is a great ROM but some things are just a little to small for my tastes. But if I had a Galaxy Note then Paranoid would be the one for sure. But still my question wasn't answered, not getting smart, just looking for an answer...Do I need to flash back to EL26 or 29 before flashing an ICS ROM, or can I use the new safe kernels built from source? I think I need to be held by the hand on my first one.
Blars1206 said:
I had all these on the Vibrant, but non are as stable as they were on the vibrant (as least by what I have read). AOKP would probably be my first choice because I am very familiar with Romanbb's work since he had a Vibrant at one time and is one of the best dev's.
Paranoid is a great ROM but some things are just a little to small for my tastes. But if I had a Galaxy Note then Paranoid would be the one for sure. But still my question wasn't answered, not getting smart, just looking for an answer...Do I need to flash back to EL26 or 29 before flashing an ICS ROM, or can I use the new safe kernels built from source? I think I need to be held by the hand on my first one.
Click to expand...
Click to collapse
You should be good from one of the safe kernels from source. I used Agat's recovery from source to flash AOKP from stock FF18 with no problems, did the normal factory reset instead of one of those format all zips. Not a problem with it. It should be safe to do as many factory resets/data wipes as you want from what I understand.
Sent from my SPH-D710 using xda app-developers app
The agats kernel is safe. Flashed two ICS roms already. If you like red, check out the hooligan rom by MaNuFaN721. Themed red.
Sent from my SPH-D710 using xda app-developers app
Hi, I am not new to rooting and custom ROMs but it has been a while and the forum has so many roms that it is hard to decide which is the most stable.
Would you guys please recommend to me the best/most stable/most customizable(cyanogen) AOSP rom for this phone? Basically I'd want the best CM9 rom and hopefully CM10 once its stable.
Thanks
http://forum.xda-developers.com/showthread.php?t=1874374
charlie81 said:
http://forum.xda-developers.com/showthread.php?t=1874374
Click to expand...
Click to collapse
I second that. CM9 Beta 1 has been very stable for me.
Sent from my SPH-D710 using XDA
Interesting.. so thats in the original development section, whats the difference between original and android development?
Also, I'm a little lost on the whole recovery thing... can someone please explain it to me and how I can get the safe clockwork for my s2 so I can flash the CM9 you guys posted? My baseband is the FH13
Edit: What do you guys think about AOKP? I loved it when i had my evo... http://forum.xda-developers.com/showthread.php?t=1514665
Can I follow the simple steps in that post? Any requirements beforehand?
I have not seen a consistent explanation about the difference between the Android and original development forums.
I have not tried AOKP. That particular version you linked is no longer being developed. There is a newer Jelly Bean build here:
http://forum.xda-developers.com/showthread.php?t=1881046
Sent from my SPH-D710 using xda app-developers app
churka said:
Interesting.. so thats in the original development section, whats the difference between original and android development?
Also, I'm a little lost on the whole recovery thing... can someone please explain it to me and how I can get the safe clockwork for my s2 so I can flash the CM9 you guys posted? My baseband is the FH13
Edit: What do you guys think about AOKP? I loved it when i had my evo... http://forum.xda-developers.com/showthread.php?t=1514665
Can I follow the simple steps in that post? Any requirements beforehand?
Click to expand...
Click to collapse
1. I believe the difference between the to sections is that Original development is for AOSP based roms while android development is for roms based of stock or leaked firmware. That being said i dont think that many people understand that when they post and it has been kind of a Cluster f.
2. Are you currently on the OTA? you will need to odin a kernel that has a working recovery with it. If youre going to another rom right away it may be easiest to odin EL26 cwm, then load into recovery and flash because this will install the kernel/recovery packaged in the rom.
3. Ive used AOKP some and its pretty nice but i am one that likes to stay with a rom that still has activity. That way if i have problem there may be a chance that it is going to get fixed. But if you are ok with a few problems here and there go ahead and test out CM10 or sbrissens AOSP.
mwcarnage said:
I have not seen a consistent explanation about the difference between the Android and original development forums.
I have not tried AOKP. That particular version you linked is no longer being developed. There is a newer Jelly Bean build here:
http://forum.xda-developers.com/showthread.php?t=1881046
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Alright thanks for help!
thecrx said:
1. I believe the difference between the to sections is that Original development is for AOSP based roms while android development is for roms based of stock or leaked firmware. That being said i dont think that many people understand that when they post and it has been kind of a Cluster f.
2. Are you currently on the OTA? you will need to odin a kernel that has a working recovery with it. If youre going to another rom right away it may be easiest to odin EL26 cwm, then load into recovery and flash because this will install the kernel/recovery packaged in the rom.
3. Ive used AOKP some and its pretty nice but i am one that likes to stay with a rom that still has activity. That way if i have problem there may be a chance that it is going to get fixed. But if you are ok with a few problems here and there go ahead and test out CM10 or sbrissens AOSP.
Click to expand...
Click to collapse
1. Yeah I was going towards that conclusion but I dont think people understand it either.
2. I already flashed CM9. I used the mobile odin method in this link: http://e4gtcm.blogspot.com/p/cm9-install-guide.html
I flashed the kernel and I got stuck on recovery and couldnt get back to my regular rom. I was just wanting to get a recovery then I mounted the storage and put CM9 and gapps and flashed away. Now im running CM9 and its flawless.
3. Can you link me sbrissens AOSP? Thanks!
churka said:
Alright thanks for help!
1. Yeah I was going towards that conclusion but I dont think people understand it either.
2. I already flashed CM9. I used the mobile odin method in this link: http://e4gtcm.blogspot.com/p/cm9-install-guide.html
I flashed the kernel and I got stuck on recovery and couldnt get back to my regular rom. I was just wanting to get a recovery then I mounted the storage and put CM9 and gapps and flashed away. Now im running CM9 and its flawless.
3. Can you link me sbrissens AOSP? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=29711677
Sent from my SPH-D710 using xda premium
Thanks
Sent from my SPH-D710 using XDA Premium HD app
Ok so Im a little new to this hole rooting and flashing stuff and I've been reading around that the Ktoonsez KT747 Kernel has amazing battery life, even if you OC. So with this being said, im currently running SlimBean 2.7 but it doesn't say anywhere if it will support this kernel. Also can't find on Ktoonsez thread either. Maybe its me im blind when it comes to finding stuff. Thanks for help! If its necessary, I wouldnt mind flashing the CM10 M2.
DarthDerron said:
Ok so Im a little new to this hole rooting and flashing stuff and I've been reading around that the Ktoonsez KT747 Kernel has amazing battery life, even if you OC. So with this being said, im currently running SlimBean 2.7 but it doesn't say anywhere if it will support this kernel. Also can't find on Ktoonsez thread either. Maybe its me im blind when it comes to finding stuff. Thanks for help! If its necessary, I wouldnt mind flashing the CM10 M2.
Click to expand...
Click to collapse
From what I have read on the thread Ktoonsez kernel works fine
jasvncnt1 said:
From what I have read on the thread Ktoonsez kernel works fine
Click to expand...
Click to collapse
Well i just loaded the jellybean 10.9.2012 and it wouldn't boot like it should so ima try a different one if i can get it to boot
[FIXED] I flashed the wrong one i did the one said above instead of the one that had the att in the name of the kernel, so its flashed and booted so i will get back with you to tell you how it goes.
[WORKS] It works like a charm thanks for all of the help.
Try this kernel http://goo.im/devs/imoseyon/d2att/lk_aosp_jb_tmo-v1.4.zip
It's imoseyons kernel. He is an amazing dev. I only use this. I have used ktoonez idk why I don't use it all the time. It says this kernel is for tmo the but trust me it works the same. He is a modified version of interactive designed for the s3. I get EXTREMELY great battery life. Go over to original dev thread over in the tmobile thread and look for lean kernel.
Use the kernel I included only if your on a jelly Bean rom.
Transmitted from my GALAXYSIII running Jelly Bean. XDA premium
KT747 can be found HERE, in the Original Development forum. There are variants of the kernel that will work for several current versions of Android.
jasvncnt1 said:
From what I have read on the thread Ktoonsez kernel works fine
Click to expand...
Click to collapse
Thanks. I didn't notice it said for all AOSP roms lol derp.
I'm also very interested in flashing new kernel but I know it uses updated BT and WiFi drivers. Is there a link to the OEM drivers somewhere? I'd rather have them before I flash the kernel just in case.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
rmead01 said:
I'm also very interested in flashing new kernel but I know it uses updated BT and WiFi drivers. Is there a link to the OEM drivers somewhere? I'd rather have them before I flash the kernel just in case.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Stock AT&T Kernel - includes root and the default BT and WIFI drivers....just in case . Alternatively, you can simply backup the /system/lib/modules folder which contains these drivers.
I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?
Well the kernel you want must be compatible with the rom you are using and your device. For example if you are on CM10 you must flash kernels built for CM10/jelly bean. Otherwise you will get boot loops.
There might be some kernels for CM10 in the development section of Galaxy wonder.
Sent from my GT-I8150 using xda app-developers app
If kernel is for your Custom ROM that you have, you obv can.
flash the kernel that is exactly for ur ROM
kernel that is for CM10
kernel that is for CM9
dadat0 said:
I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?
Click to expand...
Click to collapse
It's better to stay with the same Kernel, from my point of view, I guess if you shared with us why do you wanna change the Kernel, there might be a solution for your problem, a friend of mine Flashed a different kernel and it was supposed to be compatible, but still he had problems and he flashed everything back again.
I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now
dadat0 said:
I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now
Click to expand...
Click to collapse
Good for you, as long as everything is working smoothly, then good luck with the new Kernel:good:
is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels
egagah said:
is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels
Click to expand...
Click to collapse
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium
reddvilzz said:
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)
egagah said:
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)
Click to expand...
Click to collapse
I don't say you "must" i just said to play it save. Is it too much if we try prevent something from happening better than facing it?
Not all phone are the same as your's sir. Sometimes other phone need to do that so that there aren't any problems with it.
Sent from my HTC Sensation using Xparent Green Tapatalk 2
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
First of all. This is development section. Not big problem section.
Secound. Not exactly sure which kernel you mean, but if you are going to flash one and the same Kernel on ICS and JB then you will have problems.
And last but not least. If you don´t read the forum rules, nor for which ROM the kernel you are using is supposed to be, you will get even bigger problems.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
It's a known issue caused by your display. It affects CM10.1 and CM10. It's a kernel issue. Please try to use the General section for such topics.
Sent from my GT-I9195 using Tapatalk 4
arsradu said:
It's a known issue caused by your display. It affects CM10.1 and CM10. It's a kernel issue. Please try to use the General section for such topics.
Sent from my GT-I9195 using Tapatalk 4
Click to expand...
Click to collapse
Maybe I understood this wrong, but as you say it is only related to CM10+ ROMs. But if he is saying he is having the same issue with a CM9 based ROM, there is only one possibility to get it there. This is by flashing a CM10 based kernel onto a CM9 based ROM.
ckckckckkc,
read first post in every thread u visiting carefully dude.
skylai82 said:
New Kernel for JB or AOIP rom, I think something wrong.
Make my phone screen intermittent White/black screen.
before that I use this rom
http://forum.xda-developers.com/showthread.php?t=2120340
this 2week I try this rom,and found this issue. Faster,but dont try this rom.
http://forum.xda-developers.com/showthread.php?t=2401757
First I try flash back to [ROM][ICS]OneOfAKind v29,same issue
Now I flash to original GB rom 2.3.6 ok. no problem now.
Click to expand...
Click to collapse
just have to say one thing. the white screen issue was fixed already on a certain 10.1 kernel.
honeyx said:
Maybe I understood this wrong, but as you say it is only related to CM10+ ROMs. But if he is saying he is having the same issue with a CM9 based ROM, there is only one possibility to get it there. This is by flashing a CM10 based kernel onto a CM9 based ROM.
Click to expand...
Click to collapse
I don't think you can use such combination. Never tried but I don't think you can boot up like this.
So anyway, this is not a rom issue. Maybe I misunderstood. But the best way to avoid these issues is by making a clean installation of the ROM. Always.
Sent from my GT-I9195 using Tapatalk 4
arsradu said:
I don't think you can use such combination. Never tried but I don't think you can boot up like this.
So anyway, this is not a rom issue. Maybe I misunderstood. But the best way to avoid these issues is by making a clean installation of the ROM. Always.
Sent from my GT-I9195 using Tapatalk 4
Click to expand...
Click to collapse
I tried it already and it worked. Just this will break a lot of things or make them not to work correctly. So either he flashed the CM10.1 kernel after reverting back to the ICS based OneOfAKind ROM, or simply flashed this rom over the AOIP without doing a clean installation.
Either way. This is not a reason to start a new topic about his issue in the development section. This is a kind of ignorance by not following the forum rules, not reading the installations instructions and not posting into the correct threads just to get more attention.