Related
Hey all, long time lurk, first actual post here though. I used to jump rom to rom back when I had the original Droid on VZW, but that was so long ago, at least in terms of Android Development anyhow. So ffwd to today, I've had my E4GT now for perhaps 2 months, and I've already rooted it, flashed a Team Rouge Recovery to it (cause it was the latest I think), and am on a stock GB EL29 Rom, and I think an EL26 Kernel.
Now, I know that things have complicated so much more since the last time I was savy doing all this, so I'm vague and still learning about all the different things that can be switched in and out, here and there. But I've been too caught up with all of the recent ICS issues that were presented with the leaks and the actual release. I've since found a rom that I'm comfortable with, AOKP 7-13 , but I'm not trying to mess anything up despite having done nothing but read for the past month and a half about what to do and not to do. One thing I am absolutely sure about is that I came into this scene at a horrible time lol, things have been changing as I read them!!
Now! With this rom, is it completely nessasary to use this specific recovery, CWM5? And, is this the recovery in question? If not, please point me in the correct direction.
And "the normal route" that is mentioned in the first information post in that AOKP thread, would that be the flashing of an ICS rom from a GB rom to prevent the emmc problem that was happening, even though such this rom has that feature removed (at least if I read it correctly)
I'm not stupid nor am I completely horrible at following directions, but after feeling like getting the run around just by attempting to piece together information from different sources, it would really just put my mind at ease, and stop the headaches lol, if someone whom this wasn't so...new to could provide me an outline to follow, or at least do this, don't do that pointers.
I know this is long, and thanks for reading. I'm just hoping to get back into the scene, I hate being anxious and not know, <-- ie. my current state
mosez.315 said:
Hey all, long time lurk, first actual post here though. I used to jump rom to rom back when I had the original Droid on VZW, but that was so long ago, at least in terms of Android Development anyhow. So ffwd to today, I've had my E4GT now for perhaps 2 months, and I've already rooted it, flashed a Team Rouge Recovery to it (cause it was the latest I think), and am on a stock GB EL29 Rom, and I think an EL26 Kernel.
Now, I know that things have complicated so much more since the last time I was savy doing all this, so I'm vague and still learning about all the different things that can be switched in and out, here and there. But I've been too caught up with all of the recent ICS issues that were presented with the leaks and the actual release. I've since found a rom that I'm comfortable with, AOKP 7-13 , but I'm not trying to mess anything up despite having done nothing but read for the past month and a half about what to do and not to do. One thing I am absolutely sure about is that I came into this scene at a horrible time lol, things have been changing as I read them!!
Now! With this rom, is it completely nessasary to use this specific recovery, CWM5? And, is this the recovery in question? If not, please point me in the correct direction.
And "the normal route" that is mentioned in the first information post in that AOKP thread, would that be the flashing of an ICS rom from a GB rom to prevent the emmc problem that was happening, even though such this rom has that feature removed (at least if I read it correctly)
I'm not stupid nor am I completely horrible at following directions, but after feeling like getting the run around just by attempting to piece together information from different sources, it would really just put my mind at ease, and stop the headaches lol, if someone whom this wasn't so...new to could provide me an outline to follow, or at least do this, don't do that pointers.
I know this is long, and thanks for reading. I'm just hoping to get back into the scene, I hate being anxious and not know, <-- ie. my current state
Click to expand...
Click to collapse
Okay, first of all, AOKP already comes with a recovery (TWRP). However, if you would rather use clockworkmod then you can use this: http://tinyurl.com/7ysnylg Also, in any case where you want to flash a different ICS ROM, I suggest you use el26 CWM.
I'm aware of the TWRP that is included with the AOKP rom (listen to me, slinging around slang like a pro, lol) I only felt I needed to use CWM5 because it specified it in the instal instructions for the rom.
I would assume that I would need the CWM just for switching ICS's in the future, if that does turn out to be what I'll be doing, seeing as how ICS looks like it'll be nothing but improvements from here on oot.
mosez.315 said:
I'm aware of the TWRP that is included with the AOKP rom (listen to me, slinging around slang like a pro, lol) I only felt I needed to use CWM5 because it specified it in the instal instructions for the rom.
I would assume that I would need the CWM just for switching ICS's in the future, if that does turn out to be what I'll be doing, seeing as how ICS looks like it'll be nothing but improvements from here on oot.
Click to expand...
Click to collapse
Ooooh I get you! yes its best and suggested to flash any new ics rom from el29 stockrooted
Odin el29 stock rooted
Then flash el26 cwm kernel
Reboot to recovery then flash the ics rom
If your already on an ics rom MY method is to always Odin el29 stockrooted
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Righteo, that helps some. Now I just gotta back everything up. I made my original backup once I first rooted, I shouldn't need to make additional, right? You can find rooted, stock GB roms to go back to...right? Lol its late...I need another doobie :cyclops:
EDIT:
Actually, I'm already halfway through that. I am at el29, stock rooted. And I have the el26 kernel. I just need the CWM recovery, then the actual piece de resistance, the rom. Right Krazy?
mosez.315 said:
Righteo, that helps some. Now I just gotta back everything up. I made my original backup once I first rooted, I shouldn't need to make additional, right? You can find rooted, stock GB roms to go back to...right? Lol its late...I need another doobie :cyclops:
EDIT:
Actually, I'm already halfway through that. I am at el29, stock rooted. And I have the el26 kernel. I just need the CWM recovery, then the actual piece de resistance, the rom. Right Krazy?
Click to expand...
Click to collapse
http://chris41g.devphone.org/EpicTouch/Stock Repack/EL26/StockCWM-EL26.zip
That's the el26 kernel I use on GINGERBREAD
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
I was actually in a similar situation as you. I came from flashing on the HTC Hero(which is running AOKP at the moment, and I'm soon going to flash the new Jellybean rom that was just released for it), and that phone is completely different from the E4GT. Although i didn't start flashing from GB, I started on ICS.
I actually went from FF18 Stock Rooted to AOKP milestone 6 Friday the 13th using Agat's recovery from source, and it's a safe recovery, without problems. I am now loving AOKP
Sent from my SPH-D710 using xda app-developers app
What about the yellow triangle thing I have been reading about. What causes this and how do you prevent it? Its kind of confusing to me.
Blars1206 said:
What about the yellow triangle thing I have been reading about. What causes this and how do you prevent it? Its kind of confusing to me.
Click to expand...
Click to collapse
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I am looking to flash for the first time on this phone also, just got it a week ago. I came from the Vibrant which was so much more simple. Another question if you don't mind. I am on the now running stock OTA ICS. Do I just need to Odin a safe kernel then flash which ever ROM I choose or are the ICS kernels that are built from source now safe to flash from?
The kernels built from the source are safe. Agats kernel with recovery. You can flash that kernel being on stock FF18 and flash from there.
Edit: the agats kernel I have is for TW roms. So just do some research on what kernels you can use. (Cm9 and AOKP use different kernels.)
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
The kernels built from the source are safe. Agats kernel with recovery. You can flash that kernel being on stock FF18 and flash from there.
Edit: the agats kernel I have is for TW roms. So just do some research on what kernels you can use. (Cm9 and AOKP use different kernels.)
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I have done a ton reading, just stuck in the old ways of my old phone and simplicity of flashing on it. It was all a little confusing because even some of the updated ROM threads still say flash back to EL26 first, which is also a TW kernel isn't it? But then I read in another place it is safe to use Agats kernel built from source and so on. I was a little shocked at considerably less custom ROM options on this phone compared to the Vibrant. Granted the Vibrant has been around longer, but there were so many more options at the start which kind of leads me to think it is just that much more work to do that on this phone. By no means is this a negative remark toward any developer, just sort of expected a lot more because it is a nice phone. I was looking to flash the Platinum version of this rom http://forum.xda-developers.com/showthread.php?t=1712362 since I love the color red. But, thanks for help. I really appreciate it when someone actually gives an answer to a question instead of bash people new to a phone.
g_ding84 said:
The yellow triangle is Samsung way of telling the techs an unofficial kernel was flashed to the phone. People use a jig or if your on ICS you can use triangle away to reset the binary counter.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
And if I remember right, doesn't it only trigger if you flash an unofficial kernel through desktop Odin only? I know the Auto Root Package won't trigger it, and neither will Mobile Odin.
Sent from my SPH-D710 using xda app-developers app
EggosEvo said:
And if I remember right, doesn't it only trigger if you flash an unofficial kernel through desktop Odin only? I know the Auto Root Package won't trigger it, and neither will Mobile Odin.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Your correct only desktop triggers the yellow triangle.
Also just my steps to flashing roms 4 the e4gt
1. odin stock el29 rooted
2. flash the el26 cwm kernel (I provided on a few post back)
3. boot into recovery!
Flash what ever you want!
If you want to flash something else repeat those step! As you venture on you will get the hang of things! I hope!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Blars1206 said:
I have done a ton reading, just stuck in the old ways of my old phone and simplicity of flashing on it. It was all a little confusing because even some of the updated ROM threads still say flash back to EL26 first, which is also a TW kernel isn't it? But then I read in another place it is safe to use Agats kernel built from source and so on. I was a little shocked at considerably less custom ROM options on this phone compared to the Vibrant. Granted the Vibrant has been around longer, but there were so many more options at the start which kind of leads me to think it is just that much more work to do that on this phone. By no means is this a negative remark toward any developer, just sort of expected a lot more because it is a nice phone. I was looking to flash the Platinum version of this rom http://forum.xda-developers.com/showthread.php?t=1712362 since I love the color red. But, thanks for help. I really appreciate it when someone actually gives an answer to a question instead of bash people new to a phone.
Click to expand...
Click to collapse
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
krazy_smokezalot said:
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
I can vouch for AOKP M6. I have had two problems, both have fixed themselves(with time for the rom to settle in). Haven't tried Paranoid Android or CM9 yet. And I don't plan on it, as AOKP has everything I want in a rom.
Sent from my SPH-D710 using xda app-developers app
EggosEvo said:
I can vouch for AOKP M6. I have had two problems, both have fixed themselves(with time for the rom to settle in). Haven't tried Paranoid Android or CM9 yet. And I don't plan on it, as AOKP has everything I want in a rom.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
What! Never tried Paranoid Android!! Wtf were u been at under a rock:what: lol u think aokp is the shut!?? Well Paranoid Android ****s on AOKP IMO!!!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
krazy_smokezalot said:
Y flash that! FTR!!! You can quote me on that! go AOKP or Paranoid Android even CM9. Or blu kuban! Has lots of unique mods!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
I had all these on the Vibrant, but non are as stable as they were on the vibrant (as least by what I have read). AOKP would probably be my first choice because I am very familiar with Romanbb's work since he had a Vibrant at one time and is one of the best dev's.
krazy_smokezalot said:
What! Never tried Paranoid Android!! Wtf were u been at under a rock:what: lol u think aokp is the shut!?? Well Paranoid Android ****s on AOKP IMO!!!
AOKP M6 "Friday The 13th Edition"
also if I helped you in anyway, Lets have some manners and hit the thanks!
Click to expand...
Click to collapse
Paranoid is a great ROM but some things are just a little to small for my tastes. But if I had a Galaxy Note then Paranoid would be the one for sure. But still my question wasn't answered, not getting smart, just looking for an answer...Do I need to flash back to EL26 or 29 before flashing an ICS ROM, or can I use the new safe kernels built from source? I think I need to be held by the hand on my first one.
Blars1206 said:
I had all these on the Vibrant, but non are as stable as they were on the vibrant (as least by what I have read). AOKP would probably be my first choice because I am very familiar with Romanbb's work since he had a Vibrant at one time and is one of the best dev's.
Paranoid is a great ROM but some things are just a little to small for my tastes. But if I had a Galaxy Note then Paranoid would be the one for sure. But still my question wasn't answered, not getting smart, just looking for an answer...Do I need to flash back to EL26 or 29 before flashing an ICS ROM, or can I use the new safe kernels built from source? I think I need to be held by the hand on my first one.
Click to expand...
Click to collapse
You should be good from one of the safe kernels from source. I used Agat's recovery from source to flash AOKP from stock FF18 with no problems, did the normal factory reset instead of one of those format all zips. Not a problem with it. It should be safe to do as many factory resets/data wipes as you want from what I understand.
Sent from my SPH-D710 using xda app-developers app
The agats kernel is safe. Flashed two ICS roms already. If you like red, check out the hooligan rom by MaNuFaN721. Themed red.
Sent from my SPH-D710 using xda app-developers app
Hi guys, got nitro hd a few weeks later. Till now never rooted and it's still in gb 2.3.5. Now wanted to try something and thought of upgrade or flashing a roms.
So what I need is, should i go for official ICS or cm rom. And as I'm a noob would like a detailed tutorial on flashing/rooting.
Thanks in advance.
Sent from my iPhone using Tapatalk
Here's my suggestion of how to progress into the custom ROMs world...
1. Read about rooting your Nitro. Look in our Dev Forum for guides on doing it.
2. Root while you're still on 2.3.5 (to circumvent any of the stated issues with rooting Official ICS), also install CWM (ClockworkMod) on it as it will allow you to easily install ROMs.
3. Then try the CM9 ROM nightlies. It's fast, stable and smooth.
4. After you've gotten comfortable with that and have gone through a few nightlies...Then you can feel free to venture forth into the other custom ROMs (MAKE SURE you're familiar with making proper backups in case you want to revert back to previous builds/ROMs), or even the CM10 Preview builds.
Good luck!
Namuna said:
Here's my suggestion of how to progress into the custom ROMs world...
1. Start with upgrading to the Official ICS. Get acquainted with it.
2. Read about rooting your Nitro. Look in our Dev Forum for guides on doing it.
3. When you feel confident about rooting, go ahead and do so. Then try the CM9 ROM nightlies. It's fast, stable and smooth.
4. After you've gotten comfortable with that and have gone through a few nightlies...Then you can feel free to venture forth into the other custom ROMS (MAKE SURE you're familiar with making proper backups in case you want to revert back to previous builds/ROMs), or even the CM10 Preview builds.
Good luck!
Click to expand...
Click to collapse
Sorry to Hijack .But isnt it like a Pain to Root the Official ICS update ,wouldnt it be easier to root on 2.3.5 and install CWM and then flash ? Im not second guessing you ,I just got my Nitro HD today but been reading that the process to root ICS is kind of long and tricky.
lowlab said:
Sorry to Hijack .But isnt it like a Pain to Root the Official ICS update ,wouldnt it be easier to root on 2.3.5 and install CWM and then flash ? Im not second guessing you ,I just got my Nitro HD today but been reading that the process to root ICS is kind of long and tricky.
Click to expand...
Click to collapse
You could be right. I rooted mine back on 2.3.5 so I haven't gone through any of the hassles as have been stated with rooting from official ICS. I shall adjust my original post.
Doble check.
OP double check your baseband version cuase if its 2.3.5 V10j ,it has been stated that its nearly impossible yet doable after many tries.
To be honest, I don't know more details about the android world. Can someone plz link the basics of android like cwm, adb & so I can have some basic knowledge about it.
Actually, I feared I would brick it.
And thanks guys for the replies.
Sent from my iPhone using Tapatalk
lowlab said:
OP double check your baseband version cuase if its 2.3.5 V10j ,it has been stated that its nearly impossible yet doable after many tries.
Click to expand...
Click to collapse
its v10f-oct-31-2011
and kernal 2.6.35.11+
Download super one click v2.3.2 from machzelets unbricking guide and root with that.
Sent from my LG-P930 using xda premium
rani9990 said:
Download super one click v2.3.2 from machzelets unbricking guide and root with that.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Will do it by evening and any idea abt roms & cmw. I like to try the ICS.
Sent from my iPhone using Tapatalk
If you wanna try the official ICS, get cwm from ROM manager. Then download honos flash able official ICS. Try it out, if you like it, keep it, if you don't, switch to something like cm9 or cm10 or hono's full throttle or honos aokp, the choices are endless, all you need to do is search .
Sent from my LG-P930 using xda premium
rani9990 said:
If you wanna try the official ICS, get cwm from ROM manager. Then download honos flash able official ICS. Try it out, if you like it, keep it, if you don't, switch to something like cm9 or cm10 or hono's full throttle or honos aokp, the choices are endless, all you need to do is search .
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Thanks. Btw, do you post a clear instruction.
Any chance of bricking?
Sent from my iPhone using Tapatalk
green. said:
Thanks. Btw, do you post a clear instruction.
Any chance of bricking?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
There is no chance of bricking, if you get cwm from ROM manager itself.
Sent from my LG-P930 using xda premium
Whats Kernal and other stuffs.
rani9990 said:
There is no chance of bricking, if you get cwm from ROM manager itself.
Sent from my LG-P930 using xda premium
Click to expand...
Click to collapse
Rooted, installed CMW. Whats next, should i go with CM.
BTW, whats the difference between RC, Nightlies. And how to install thru CMW.
Whats kernal and what it does?
green. said:
Will do it by evening and any idea abt roms & cmw. I like to try the ICS.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Try the official ics before custom ics, it's WAY faster than official gingerbread, it's stable and once debloated it's pretty perfect as it is to me.
Then if you want to taste something else, try the cm9/10 but I would let them as a second passage to ics/jb.
For the official rom you can either flashing with lg tool (using the before - after rooting method brianlily posted here) or go with cwm as stated by rani9990, it should be the same.. the substantial difference is that if you don't put the cwm recovery before ics, then you'll need to go through partial unbrick process to revert back to gingerbread, because on ics the cwm won't be possible to install.
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
grainyrice said:
I'm running Slim Bean 3.1.0 on my SGS3. Recently, I've been trying to flash the AGAT and KT747 kernels on my phone, but with no success.
I've tried flashing kernel,wipe cache/dalvik, rebooting, and then installing the Slim Rom file over it.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
98% Sure you are trying to mix an AOSP based ROM with a TW (Stock) type Kernel. That doesn't typically work. There is an option for the AOSP version of Ktoonsez kernel though that _should_ be a better fit with that ROM.
Have fun and continue to read up *Grin*
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
grainyrice said:
The thing is, I'm almost positive I downloaded the AOSP version for the KT747 kernel
Click to expand...
Click to collapse
That's a good start, the AGAT says LJ7 based in the Post, leading one to believe it is for TW ROMS. And on the Ktoonsez it does have a download link for either TW or AOSP. One you are looking for should be named "KT747-Kernel-AOSP-JB-SPR-12-11-2012.zip". Verify that and speak up again if you are still having issues.
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
grainyrice said:
Yes, I'm certain that was the file I flashed, because I remembered noting that the file was 7.72MB prior to downloading.
Also, I'm sure that the Slim Rom is compatible with the KT747 kernel because several posts were made on the thread saying that
the battery life was amazing, which made me wonder if I was doing something wrong.
Click to expand...
Click to collapse
Reading your original post, The order should go 1) ROM then 2) Kernel ... Then Wiping Cache and Dalvik-Cache (And other wipes if needed). Reason for this is if you flash the Kernel first, then the Rom you are over writing the custom Kernel with whatever is packaged with the ROM.
That is the only other obvious thing I see at this point. Hope that helps..
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
pastert33 said:
Did you flash the kernel fix that slim says you need to flash in order to run another kernel? Guess you didn't...
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
See that now, thanks and sorry for the inconvenience.
Please report back on how you like it, and if you really notice any differences.
It dropped 1% in approximately 30 minutes, half of the time the screen was just on, other half I left it on my desk (all while connected to Wifi).
My settings are 96/1998 on ktoonservative.
In my opinion, so far its amazing as compared to other AOSP roms I've tried.
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
panoramix30 said:
hi guys! i've got the same problem, can't change the kernel in my i9300.. could you please tell me where i can find the kernel fix that you mentioned above?? Thanks!
Click to expand...
Click to collapse
If your using the I9300, i would check the thread for that phone. Otherwise you risk bricking it flashing something from this one.. This is for the US Variant SPH-L710.
Go here for all the I9300 stuff, Please save yourself a bricked phone. Thanks! http://forum.xda-developers.com/forumdisplay.php?f=1563
Will do, thank you!
Sent from my GT-I9300 using xda app-developers app
I have been trying to search for a V20c AT&T rooted ROM that has CWM already in it. All I found is threads with people talking about this subject but no ROM. Is this ROM available? If so, can someone link me to it? CM10 battery life SUCKs big time and I would like to try stock that's rooted and has CWM. Thanks!
AUSTIN3:16 said:
I have been trying to search for a V20c AT&T rooted ROM that has CWM already in it. All I found is threads with people talking about this subject but no ROM. Is this ROM available? If so, can someone link me to it? CM10 battery life SUCKs big time and I would like to try stock that's rooted and has CWM. Thanks!
Click to expand...
Click to collapse
To clarify a misunderstanding that you have ROM's DO NOT contain CWM. CWM allows you to install ROM's. If you are running CM10 you must have by default CWM or equivalent like TWRP. Just look for your ROM of choice and install through CWM. Since you are looking for v20c I would recommend http://forum.xda-developers.com/showthread.php?t=1980541. However, HO! NO! also has one that is 100% stock plus there are several others that are available under development.
Sent from my LG-P930 using xda app-developers app
Im in need of ics roms for my epic 4g touch preferably cm roms,aosp,aokp that come with recoveries when u flash them. I've tried a lot that I Google search and the links are old and no good.
Try this: http://forum.xda-developers.com/showthread.php?t=2309188
Sent from my SPH-D710 using XDA Premium 4 mobile app
Cool I will try it out..my phone will only flash ics or gb for some weird reason it won't flash any and all jb roms any more.
mr. ya-di-da said:
Cool I will try it out..my phone will only flash ics or gb for some weird reason it won't flash any and all jb roms any more.
Click to expand...
Click to collapse
If you are still wanting to run JB check out one of the one click Installers. I suggest the rooted wipe all version. Remember the wipe version will format your internal sdcard so back up anything you need first. These will get you back to the JB file system and got should be able to flash any of the ROMs available here. Good luck
I've done every jb one click ..rooted, unrooted full restore with Odin on my PC. Not one will work. Just stays in boot loop. But ics and gb flash just fine
IxIghtNlt
kvevand63 said:
Try this: http://forum.xda-developers.com/showthread.php?t=2309188
Sent from my SPH-D710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Running this now..works great so far. If u know of any more please send them my way. Remember, only ics for right now until someone can help me fix the jb issue. Thx.
Questions belong in the Q and A section, not development.
Also, users are expected to read what is offered in the threads. XDA is not a support site, so some work is expected of members here...
Here are two links, along with the one above, where you can start your journey.
http://forum.xda-developers.com/epic-4g-touch/development
http://forum.xda-developers.com/epic-4g-touch/orig-development
Thread closed before it spirals into a best rom thread.