Hi,
Have an issue with the HTC ONE X - The unit is screen is "OFF" but the device is "ON" , i cant get the screen to wake up.
When i connect to USB i can see the device inside content - so usb works , also when i use ADB Device i see the device connected
tried "adb reboot" the device did a reboot but screen still "off"
Any idea how i can Re-flash the unit to factory reset when the screen is off ?
or maybe any other idea how to wake up the screen ?
thanks
Goren
itzik-g said:
Hi,
Have an issue with the HTC ONE X - The unit is screen is "OFF" but the device is "ON" , i cant get the screen to wake up.
When i connect to USB i can see the device inside content - so usb works , also when i use ADB Device i see the device connected
tried "adb reboot" the device did a reboot but screen still "off"
Any idea how i can Re-flash the unit to factory reset when the screen is off ?
or maybe any other idea how to wake up the screen ?
thanks
Goren
Click to expand...
Click to collapse
Try to do a pressure between display and down right on the main camera and try to wake up the phone, looks like you have BSD(Black Screen of Dead)
Few days ago i started havig almost the same problem, the phone rings for exemle but screen stays black. when i try to wake the phone via the top button capacitive buttons light up as usual but screen stays black. i have to reboot the phone by holding the power button for 10 secs and it works again, but the issue is now happening more frequently and it is annoying, is it some kind of hardware problem ?
Related
What do i do if phone won't turn on ^_^. It was turning on... but then shutting off mysteriosuly during boot... and during cwm... but now.. even after a battery pull.. and also plugged in... no power...will go to the phone?
What makes no sense was that it working fine.. till I edited an eri.xml file.... all I did was place it into /sdcard and /data .
- Can't get into bootloader
- Can't get into download mode
- Won't even show "charging" screen
- When I plug it into a computer, it does the OMAP4440 disconnect, reconnect shindig.
- Tried different batteries
After like 2 hours of research teh OMAP4440 is somehow related to the black screen of death... I mean just look at this:
device manager "omap4440"
I have no idea what to do............................ ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh...
I was just about to post that I'm in a similar situation.
I plugged mine in yesterday to charge it up and when I went back to check the phone was dead no life at all.
What makes no sense was that it working fine.. till I edited an eri.xml file.... all I did was place it into /sdcard and /data .
- Can't get into bootloader
- Can't get into download mode
- Won't even show "charging" screen
- When I plug it into a computer, it does the OMAP4440 disconnect, reconnect shindig.
- Tried different batteries
no one's ever solved omap4440 ? + black screen of death?
So I bricked my GNEX...Then brought it back to life!
IDK if this helps or not
did you get you phone fixed i have the same exact problem and wondering if there is a fix for it
Mine is having similar issues, the led indicator is lighting and it's making noise but no screen lighting at all. I tried hard reboot. Everybody keeps prompting me to use command mode by pressing home, volume up and power button.,the trouble is my phone doesn't light up so I can't see the commands. I sent my first s7 edge back and I'm on the replacement and now it bricked
jdub4christ said:
Mine is having similar issues, the led indicator is lighting and it's making noise but no screen lighting at all. I tried hard reboot. Everybody keeps prompting me to use command mode by pressing home, volume up and power button.,the trouble is my phone doesn't light up so I can't see the commands. I sent my first s7 edge back and I'm on the replacement and now it bricked
Click to expand...
Click to collapse
This particular forum is for a different galaxy phone than s7, but I do hope you solve the problem
Problems with my Samsung Galaxy Tab S 8.4 SM-T705:
1st: October 2014
2 weeks after buying, my tablet's battery drained overnight from 45% to zero. Next morning, I turned my tab on after charging to find out that the Tab starts but without any Samsung GAlaxy Tab S logo or Samsung Logo and the Screen has turned green, rendering it difficult to read in auto brightness mode or low brightness mode.
I restarted the device 2-3times and the device started working normally. This was my 1st device restart. I never used to power off the device before.
In 1st 6months, this greenish display problem n logo problem occured 2-3times, and i ignored it, because, it used to get resolved by itself with restart and I had no service centre in and around 50km to my work place.
2nd: January 2014
My device all of a sudden stopped working.. actually hanged.. I managed to turn it off but failed to restart it.
Later I realised that the device has restarted, but the screen was not responding when the screen blinked for a moment with the opening of book cover.. and the back cover of device was warm..
Googling taught me the way to access recovery screen n I opened recovery mode with "power+vol down+home key" and pressing vol down in recovery screen to restart tab.. again the tab started working fine..
3rd: Lollipop update: May 2015
I did Lollipop update. The device was smooth to operate at first. But gradually, i noticed that unlocking the tab failed to light up the display everytime, just the soft keys lighted up. But one day, the device freezed with no response from touch screen. I was unable to switch off the device also.. I had to drain the battery by playing music using S voice to turn the device off. "power+vol down+home key" too was not working.
On googling, I learned to reset device with "power+vol up+vol down" keys pressed together. finally the device restarted, but the device used to hang occassionally.
Googling let me know that i need to factory reset device upon firmware update for normal functioning, which i didn't do after update. so, I backed up my device, uninstalled many apps to make the device run a bit smooth and did a factory reset.. Resetting didn't improve the situation much, but now, the device display failed to light up on a regular basis on unlocking most of the time..
Now the situation is that, the device turns on, finger print scanner works, all apps n everything working, but display remains black, and touch screen is not responding.. using sidesync, everything on Tab can be accessed via laptop.
Tricks tried:
1) Factory reset
2) power+ vol up+vol down
3) power+ vol up+home key
4) power+ vol down + home key
5) Power off using sidesync and then restart
Results: All failure. Everything works but the display never lights up normally..
Plzz help....:crying::crying:
Bump. I'm starting to have similar problems with my SM-T800 running 5.0.2. I open the cover and the device fails to turn on. I press the power button and the screen stays black but the notification bar turns on. I can shake the crap out of the device and the screen stays black but I can see the notification bar flicker. Driving me batty.
If i had any problems like you guys, I would just return it to the place i bought it, for a refund or replacement or even a repair, post it to the service centre if it`s too far to travel too.
You problems sound like battery and or loose connector inside your tablet, it happens frequently on Samsung tablet for the connectors to come loose, if the tablet is dropped or twisted, no outside damage might be seen.
John.
dear community
my neighbour gave me his Z1 compact because it did not work anymore.
It was stuck on loginscreen, when i touched the unlock button it vibrated, but nothing else happened.
I could however download all his photos on my Win7PC by just plugging it on USB
but it kept staying unresponsive, no way to get beyond lockscreen
So I used SonyMobileFlasher and unlocked the bootloader without any issues - no errors.
Then I flashed a new firmware obtained through XperiFirm without errors
Now, when I boot, I can hear the boot-melody (??)
but the screen stays dark.
I can connect the phone via flash mode and fastboot mode
I can switch it off by pressing volUp+Power (three vibrates)
from Off i press power, it plays the melody, but the screen stays dark
Is it a hardware damage?
Is there anything I can do for the phone?
thx for ur input
magusberlin said:
dear community
my neighbour gave me his Z1 compact because it did not work anymore.
It was stuck on loginscreen, when i touched the unlock button it vibrated, but nothing else happened.
I could however download all his photos on my Win7PC by just plugging it on USB
but it kept staying unresponsive, no way to get beyond lockscreen
So I used SonyMobileFlasher and unlocked the bootloader without any issues - no errors.
Then I flashed a new firmware obtained through XperiFirm without errors
Now, when I boot, I can hear the boot-melody (??)
but the screen stays dark.
I can connect the phone via flash mode and fastboot mode
I can switch it off by pressing volUp+Power (three vibrates)
from Off i press power, it plays the melody, but the screen stays dark
Is it a hardware damage?
Is there anything I can do for the phone?
thx for ur input
Click to expand...
Click to collapse
Seems like busted display to me. Flash recovery and see if touch screen works in recovery. If not, definitely hw.
thx for ur reply, i flashed TWRP- several trys, now I can see the TWRP lock screen, but when I swipe to log in it vibrates, soon after the screen scrambles away, vertical lines just fade and then crash-off.
seems very much like the screen is defect? not worth replacing, seems like a whole huzzle to replace that screen
pitty, one more device to trash.
i am seriously looking into fairphone2, would be nice to replace the screen so easy.
magusberlin said:
thx for ur reply, i flashed TWRP- several trys, now I can see the TWRP lock screen, but when I swipe to log in it vibrates, soon after the screen scrambles away, vertical lines just fade and then crash-off.
seems very much like the screen is defect? not worth replacing, seems like a whole huzzle to replace that screen
pitty, one more device to trash.
i am seriously looking into fairphone2, would be nice to replace the screen so easy.
Click to expand...
Click to collapse
Maybe not extremely easy, but there are guides in the forum here for screen replacement, if your feel up to it.
HI, after a full charge, i unplugged my ze551ml, it showed up lockscreen and everything seemed ok.. after natural automatic screen lock it never went on.
Black screen and no signs of activity at all, neither vibration or sound.
tried to long press power button => no response
attached to pc => no fastboot / adb
tried combining power/up power/down power/up&down buttons without success
no update where made but yesterday it showed MM update notification which wasn't accepted.
is there any chance to make it live again before doing RMA?
Just to check
Press and keep pressed Vol+ and power for 3 mins, then connect usb lead to phone -- dont have it connected to charger or any device, then release button then try power on,
just a test to see if your usb port is at fault - try a combination with cable in and out
Well a few days ago, like 2 weeks ago, I thougt I lost my SW3 (I use it w / o leash because it broke and there's no replacement for the stainless steel one) but actually it was lost on my travel bag xD
After plug in again it started to charge, but when I tried to turn on (after reach 100%), after the sony and SW3 logo, it turns off, like it has a problem at boot. I tried to repair via Xperia Companion and the process was succesful, but the watch just gets stuck on the same SW3 logo.
Now I think is the battery, but I'm really hoping is not, there are any suggestion guys about what could be happening?
Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus
The Watergod said:
Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus
Click to expand...
Click to collapse
I forgot about this thread lol
thanks dude!, A couple times it reached the spinning dots, but not always, sometimes it turned off on the SW3 logo before the dots appear, and actually I tried all those things you mentioned, but it didn't work, also I think my watch is (even more) screwed now xD...
Trying to do a second repair on Xperia Companion, the watch got turned off in mid repair, lending obviously on an error, and also losing the ability of do offline charge so once the battery reach 0, is over...
now when I plug in just stays on the SW3 logo, I still can go to connect USB screen and go to the two clicks menu (and stays on), but every time I try a repair, in the middle of the process disconnects and turns off, I don't know exactly why only when is plugged on the repair process it turns off, even pluged in the PC w/o repair stays connected all the time... bad thing is I don't know if is charging or not, so could stop working anytime
Have you tried to push the update through adb recovery mode?
The Watergod said:
Have you tried to push the update through adb recovery mode?
Click to expand...
Click to collapse
every day I'm more convinced the watch is screwed
If I turn on the watch stays on the SW3 logo all the time (it seems offline charge works after all), I even can go to the "insert USB" screen and stays on all the time, but when I try to push something to the watch, always disconnects, turns off and the process obvioulsy gets interrumpted, I'm losing my hopes xD
I'm using the original charging wire, but tried with other working ones
my sister bought me this smart watch , it came on long enough to program a few this after I charge it and then 10 minutes later it shut off and now it won't come back on or power up , what should I do ?
I have a weird problem with my sw3. When I plugin my watch to a charger nothing shows up but the watch gets heated up. But when I connect it to PC it just keeps turning on and off. Tried various methods available on this site but none of them worked.