I dont know if this is the right place to ask but will any custom rom for huawei (i.e hyd52 or omni) go to 4.4.3?
Mairou44 said:
I dont know if this is the right place to ask but will any custom rom for huawei (i.e hyd52 or omni) go to 4.4.3?
Click to expand...
Click to collapse
Maybe when omni rom source is updated. And hydrom only when another rom is on that version but I don't know if there will be any new hydrom version since the developer lost his phone.
Gesendet von meinem P6-U06
Mairou44 said:
I dont know if this is the right place to ask but will any custom rom for huawei (i.e hyd52 or omni) go to 4.4.3?
Click to expand...
Click to collapse
Woah woah. Not even all the Nexus devices have it yet, just give it a week or two. It all depends on how big the underlying stuff changed.
Related
Hey everyone,
I just receiveed an e-mail from Huawei saying that they are looking for 500 beta testers for Android 4.4 KitKat with Emotion UI 2.3 on their Ascend P6. But since the mail was in German I am not sure if international devices are accepted, so just try for yourself.
Requirements:
Ascend P6 with B125 software
Enter name and IMEI at http://www.huaweidevices.de/beta-tester (the update will be delivered OTA)
Feedback can be supplied to [email protected]. Maybe there is also an English version of this beta. The official update should come early July 2014 (to Germany) and brings the following new features:
more filters for photos
watermark for photos
phone manager: improved performance, energy management & garbage collection
direct unlocking with the correct code (no need to press OK)
new lockscreen and online designs
That's everything I know, I hope you are looking forward to the update
e1smann said:
Hey everyone,
I just receiveed an e-mail from Huawei saying that they are looking for 500 beta testers for Android 4.4 KitKat with Emotion UI 2.3 on their Ascend P6. But since the mail was in German I am not sure if international devices are accepted, so just try for yourself.
Requirements:
Ascend P6 with B125 software
Enter name and IMEI at http://www.huaweidevices.de/beta-tester (the update will be delivered OTA)
Feedback can be supplied to [email protected]. Maybe there is also an English version of this beta. The official update should come early July 2014 (to Germany) and brings the following new features:
more filters for photos
watermark for photos
phone manager: improved performance, energy management & garbage collection
direct unlocking with the correct code (no need to press OK)
new lockscreen and online designs
That's everything I know, I hope you are looking forward to the update
Click to expand...
Click to collapse
i am definitely gonna join this
Are they already rolling out the OTA ? I applied but I'm on B507
Not for me :sad: just downgraded all the way from Omni Rom for this :laughing:
Downgraded to b125. Registered already, it says: you will get the update shortly. See what happens.
BB
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
taaeem said:
Not for me :sad: just downgraded all the way from Omni Rom for this :laughing:
Click to expand...
Click to collapse
I think we have to wait a few hours. But im sure, huawei blog will upload the beta firmware sonner or later
BB
When you guys registered, does it also said that you will get the update for your P7? I think its a mistake or?
Gesendet von meinem HUAWEI P6-U06
Same mistake here.
Do I need to go back to b125?
Or will it also work with b132 which im running?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
stuntmanmike82 said:
Same mistake here.
Do I need to go back to b125?
Or will it also work with b132 which im running?
Gesendet von meinem HUAWEI P6-U06 mit Tapatalk
Click to expand...
Click to collapse
You need to go back to B125.
BB
Hoping they push the update soon! On Facebook nobody got it yet
But we get EMUI 2.3 before the chinese :win:
Gesendet von meinem HUAWEI P6-U06
taaeem said:
Hoping they push the update soon! On Facebook nobody got it yet
Gesendet von meinem HUAWEI P6-U06
Click to expand...
Click to collapse
Yes, like i said, my thought is: we have to wait a few hours. Maybe a day or 2.
BB
benjaminbodoky said:
Yes, like i said, my thought is: we have to wait a few hours. Maybe a day or 2.
BB
Click to expand...
Click to collapse
Its Huawei so probably a week or two.
Gesendet von meinem HUAWEI P6-U06
applied!! when you receive pls warn me!! i will do the downgrade then!
I hope this international beta will have the option to change the default storage to external sdcard. I'm missing this option at this time. Why only CN-rom have this option?
Sent from my P6-U06 using xda app-developers app
benjaminbodoky said:
You need to go back to B125.
BB
Click to expand...
Click to collapse
How can i downgrade from B132 to B125 ?
Download .app B125 and just update ? Just use it on B132 ?
Thanks !
just like u said...so simple
Question:
How can i downgrade from B507 to B125 without WINDOWS PC (I have Mac)
U have to download a separate downgrade file from Huawei ... install via stock recovery and then install b125... , it has been mentioned several times
As I think now, someone somewhere will capture the OTA and release it. And we will be able to install it through stock recovery or maybe even use EMUI's update option. No need to be on 125, it should work from any other version, just not with OTA.
I just signed up now too. Let's hope I get the ota!
I also registered ... let's see if I get the update !
Hi,
Was not convinced reading this. Can someone please comment whether this is true or not? If issues like battery drain have not been fixed, i don't understand why it deserves the final release tag.
Half baked "official".
warea said:
Half baked "official".
Click to expand...
Click to collapse
They are so far behind that someone took a foolish decision to release before enough has been fixed...
B510 from huawei ro.
http://huaweinews.com/2014/06/ascend-p6-b510-official/
http://www.huaweidevice.ro/huawei-support/?c=1&searchInput=Huawei+Ascend+P6
Sent from my HUAWEI P6-U06 using XDA Free mobile app
When it's downloaded it says EDGE-U00 V100R001C00B510...
What does it mean "U00"?
Is this even compatible with U06, or is it the same thing only a different code?
sale 83 said:
When it's downloaded it says EDGE-U00 V100R001C00B510...
What does it mean "U00"?
Is this even compatible with U06, or is it the same thing only a different code?
Click to expand...
Click to collapse
That's BETA.
XDAvatar said:
That's BETA.
Click to expand...
Click to collapse
I have the Beta and its U06. And according to Huawei Germany official KK comes when all bugs are fixed and that's not now, so I think a new Update will come soon, and there all bugs will be fixed and so on.
Gesendet von meinem HUAWEI P6-U06
taaeem said:
I have the Beta and its U06. And according to Huawei Germany official KK comes when all bugs are fixed and that's not now, so I think a new Update will come soon, and there all bugs will be fixed and so on.
Gesendet von meinem HUAWEI P6-U06
Click to expand...
Click to collapse
Then you have a version with the build.prop modified.
XDAvatar said:
Then you have a version with the build.prop modified.
Click to expand...
Click to collapse
Not so far I know :laugh: only modified things with phone manager.
Gesendet von meinem HUAWEI P6-U06
taaeem said:
Not so far I know :laugh: only modified things with phone manager.
Gesendet von meinem HUAWEI P6-U06
Click to expand...
Click to collapse
The rom for Germany released too right without any changes from beta ?
How to downgrade Firmware from B507 to B132 prior for the installation of B510? Thank you. Hope you can help me.
hi
i don't know if this is the correct place to post:
according to http://www.huaweiblog.de/firmware/h...pdate-b510-wird-offiziell-verteilt/#more-7036 there is a international release for the "new" B510..
maybe they start the OTA in the next few days/weeks..
Is it possible or not? Can i upgrade my Huawei P6 B130 to b132,512 or 513?
Sent from my HUAWEI P6-U06
yes you can!!
Amir saif said:
Is it possible or not? Can i upgrade my Huawei P6 B130 to b132,512 or 513?
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
is your p6 rooted? coz me i only upgraded mine from b125 to b132 just to get b512 & b513 then eventually i tried the repack versions of those.. more better ! and saves more battery and better camera...
ksyfu160 said:
is your p6 rooted? coz me i only upgraded mine from b125 to b132 just to get b512 & b513 then eventually i tried the repack versions of those.. more better ! and saves more battery and better camera...
Click to expand...
Click to collapse
Yeah it is rooted.
Sent from my HUAWEI P6-U06
ksyfu160 said:
is your p6 rooted? coz me i only upgraded mine from b125 to b132 just to get b512 & b513 then eventually i tried the repack versions of those.. more better ! and saves more battery and better camera...
Click to expand...
Click to collapse
Where r u @ksyfu160? Reply me bro
Amir saif said:
Yeah it is rooted.
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
Sent from my HUAWEI P6-U06
sorry for late reply
Amir saif said:
Where r u @ksyfu160? Reply me bro
Sent from my HUAWEI P6-U06
Click to expand...
Click to collapse
since ur p6 is rooted..
try to install custom recovery like CWM or TWRP .. but for me its more easy to use TWRP..there are easy steps to install twrp just read threads from surde petru Thanks to them...
then there you go! you can install any rom that you want ...
just check and be sure that the roms that ur going to install are stable and compatible version...
im using custom rom coz its more better than the official firmwares,
my firmware version is b635 which is more stable and the battery last long.. here is the thread > http://forum.xda-developers.com/ascend-p6/development/b635-repack-bbnkk4-4-2-huawei-p6-t2929111 follow the instruction! dont forget to backup ok?
just left a message in case u have some question regarding this... good day!
ksyfu160 said:
since ur p6 is rooted..
try to install custom recovery like CWM or TWRP .. but for me its more easy to use TWRP..there are easy steps to install twrp just read threads from surde petru Thanks to them...
then there you go! you can install any rom that you want ...
just check and be sure that the roms that ur going to install are stable and compatible version...
im using custom rom coz its more better than the official firmwares,
my firmware version is b635 which is more stable and the battery last long.. here is the thread > http://forum.xda-developers.com/ascend-p6/development/b635-repack-bbnkk4-4-2-huawei-p6-t2929111 follow the instruction! dont forget to backup ok?
just left a message in case u have some question regarding this... good day!
Click to expand...
Click to collapse
Your link was not working then i read manually to go into the p6 section,,,well i saw a notice mentioned there, you must be on kitkat, but i'm on jelly bean B130, now what?
Sent from my HUAWEI P6-U06 using XDA Premium 4 mobile app
Hello, I would like to create a port CM12 to my phone. I read the wiki CM, but I could not find anything about this model. The only source is CM11 kernel. Can it be possible to do peeking port on this phone?
krzysiupoc said:
Hello, I would like to create a port CM12 to my phone. I read the wiki CM, but I could not find anything about this model. The only source is CM11 kernel. Can it be possible to do peeking port on this phone?
Click to expand...
Click to collapse
Huawei havent released lolipop for our phone so thers no source code on wich to compile cm.
Sent from my SM-G850F
Nothing.. Already someone answered
Huawei MT2 has a lollipop. Could we edit the kernel so that it has launched on P6-UO6
krzysiupoc said:
Huawei MT2 has a lollipop. Could we edit the kernel so that it has launched on P6-UO6
Click to expand...
Click to collapse
I dont think that MT2 has the same hardware as P6.
Sent from my SM-G850F
At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Eagle-no1 said:
At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Click to expand...
Click to collapse
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
mele80 said:
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
hi i want this tablet the 8.0 version do you recommend it and is this android 6 official for 8.0 version?
So does this mean somebody could actually make a Marshmallow custom ROM for the M2?
:good: excellent news,
nice news.. hopefully someone generates and m10 version from this
It is a full-featured Android 6 or what it is ?Thanks
stosun said:
It is a full-featured Android 6 or what it is ?Thanks
Click to expand...
Click to collapse
1st post has all what I know of the package.
Hello, what is the procedure to update my M8?
Guys this isn't an update per se. It is open source kernel and drivers which (hopefully) will allow somebody to create a custom ROM from.
Anyone able to develop something like cm or if these kernel sources?? Have been waiting for this for ages. I'll start using my m2 8.0 again! Stupid emui 3!!!
Seconded. Would love to get an update. The hardware is good but the OS feels so old!!
How about the M2 10" (M2 A01L) for update ?
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Caelestiel said:
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Click to expand...
Click to collapse
What did you flash?
Mxplorer said:
What did you flash?
Click to expand...
Click to collapse
i did something wrong in formatting. I didnt flash anything
(see my last reply for updated status)
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Mxplorer said:
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Click to expand...
Click to collapse
I didnt flash anything, I accidentally wiped system partition, all I need is a stock rom to be flashed again
All I can find is firmware zip with dload and UPDATE.app inside.
-I can only boot into recovery...
-Stock Rom of 801L is ALL I need.
https://www.youtube.com/watch?v=DyUainEJwLM
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Mxplorer said:
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Click to expand...
Click to collapse
thank you but, I think I already downloaded it, What I need is a flashable zip... because I have no OS
btw what model of M2 are you using? may I ask for a TWRP backup ofcourse without your data, only the needed ones to regain my os...