At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Eagle-no1 said:
At last, something new (at least to me)
M2-801L&M2-802L&M2-802LD&M2-801W_Android6.0_EMUI4.0_opensource
http://download-c.huawei.com/downlo...oadId=88523&version=345513&siteCode=worldwide
2016-9-5 257.17MB
http://m.huawei.com/enmobile/consumer/tablets/detail/mediapad-m2-en.htm
Click to expand...
Click to collapse
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
mele80 said:
That is new, we need one for 10" m2 too
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
hi i want this tablet the 8.0 version do you recommend it and is this android 6 official for 8.0 version?
So does this mean somebody could actually make a Marshmallow custom ROM for the M2?
:good: excellent news,
nice news.. hopefully someone generates and m10 version from this
It is a full-featured Android 6 or what it is ?Thanks
stosun said:
It is a full-featured Android 6 or what it is ?Thanks
Click to expand...
Click to collapse
1st post has all what I know of the package.
Hello, what is the procedure to update my M8?
Guys this isn't an update per se. It is open source kernel and drivers which (hopefully) will allow somebody to create a custom ROM from.
Anyone able to develop something like cm or if these kernel sources?? Have been waiting for this for ages. I'll start using my m2 8.0 again! Stupid emui 3!!!
Seconded. Would love to get an update. The hardware is good but the OS feels so old!!
How about the M2 10" (M2 A01L) for update ?
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Caelestiel said:
Can I flash kernel? cause TWRP says 'No OS installed'
SPECS. Huawei Mediapad M2 801L
Click to expand...
Click to collapse
What did you flash?
Mxplorer said:
What did you flash?
Click to expand...
Click to collapse
i did something wrong in formatting. I didnt flash anything
(see my last reply for updated status)
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Mxplorer said:
Don't flash the files in this thread m8! They aren't full rom files. Only stuff for developers
Click to expand...
Click to collapse
I didnt flash anything, I accidentally wiped system partition, all I need is a stock rom to be flashed again
All I can find is firmware zip with dload and UPDATE.app inside.
-I can only boot into recovery...
-Stock Rom of 801L is ALL I need.
https://www.youtube.com/watch?v=DyUainEJwLM
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Mxplorer said:
Sorry dude, I misunderstood. Let me find it..
https://www.gizdev.com/huawei-mediapad-m2-stock-android-5-1-emui-3-1-for-801l-asia-pacific-users/
Be careful though... It's a site filled with crap. Enable adblock
Click to expand...
Click to collapse
thank you but, I think I already downloaded it, What I need is a flashable zip... because I have no OS
btw what model of M2 are you using? may I ask for a TWRP backup ofcourse without your data, only the needed ones to regain my os...
Related
Recovery ROM {BETA v5.4.10}
http://en.miui.com/download-226.html
FASTBOOT ROM {BETA v5.4.10}
http://bigota.d.miui.com/5.4.10/armani_images_5.4.10_4.4_cn_d1c5763c68.tgz
abhi-xiaomi-1s said:
Recovery ROM {BETA v5.4.10}
http://en.miui.com/download-226.html
FASTBOOT ROM {BETA v5.4.10}
http://bigota.d.miui.com/5.4.10/armani_images_5.4.10_4.4_cn_d1c5763c68.tgz
Click to expand...
Click to collapse
Chinese ROM? Does it support English and Gapps? Or is it cluttered with Chinese all over the interface which I don't really understand?
No, thanks xiaomi, but I m having lollipop, save KitKat for yourselves, kindly release sources ASAP.
This is the official rom - http://en.miui.com/download-226.html
Kanth's said:
This is the official rom - http://en.miui.com/download-226.html
Click to expand...
Click to collapse
are u blind?
Oh sorry did not see
How to root it
Kanth's said:
Oh sorry did not see
Click to expand...
Click to collapse
Its ok bro
I have ramdump bug...
Sent from my HM 1S using XDA Free mobile app
Isn't there any beta miui 6 rom for Indian redmi 1s that can be flashed via twrp or CWM? Sorry but have not been following here much.
brajesh.sharma87 said:
Isn't there any beta miui 6 rom for Indian redmi 1s that can be flashed via twrp or CWM? Sorry but have not been following here much.
Click to expand...
Click to collapse
No specific Indian version hasn't been released yet.
This is Chinese version, but this ROM also has English included. So you can easily flash and set it up for English.
You can find the link for the recovery ROM in the OP. It can be directly flashed through TWRP or some other custom recovery.
Thanks...
arunal_123 said:
No specific Indian version hasn't been released yet.
This is Chinese version, but this ROM also has English included. So you can easily flash and set it up for English.
You can find the link for the recovery ROM in the OP. It can be directly flashed through TWRP or some other custom recovery.
Thanks...
Click to expand...
Click to collapse
No it fails to flash using twrp. Either I am not updated with current version of twrp is a reason or it may only be flashed with stock recovery.
I would have rather used fastboot ROM in order to update basband ,for better network and less battery drain.
one of the most welcome feature of this miui6 update is that u can use any of the sims either 1or 2 for 3g services without physically changing sim slots.
Official beta global miui6 has also been released, check miui forum for more details.
Thanks bro...
Sent from my HM 1SW using XDA Free mobile app
Install aborted.
I am not able to install the global version of ROM. It took me whole day to download and at last, it says, "Failed to extract system from dir /system" or something like that! Someone can help me?
I used both TWRP and Phillz recovery!
lionelsuyog said:
I am not able to install the global version of ROM. It took me whole day to download and at last, it says, "Failed to extract system from dir /system" or something like that! Someone can help me?
I used both TWRP and Phillz recovery!
Click to expand...
Click to collapse
Grow the habit of reading some post.....read some posts above.
sanjib734 said:
one of the most welcome feature of this miui6 update is that u can use any of the sims either 1or 2 for 3g services without physically changing sim slots.
Click to expand...
Click to collapse
is this true?
sanjib734 said:
one of the most welcome feature of this miui6 update is that u can use any of the sims either 1or 2 for 3g services without physically changing sim slots.
Click to expand...
Click to collapse
you can put both slots on 3G Preferred
Here are stock rooted ROM's with a decrypted & insecure boot.img for those of you who like to stay close to stock. They are based off of the latest firmware. There are only a few mods and addons.
Features:
-Decrypted & Insecure boot.img
-Adb fixed and working
-Pre-rooted with SuperSU
-Busybox installed
-Google Play Store
-Google Contacts Sync
-Google Calendar Sync
-------CURRENT VERSION B323--------
NXT-AL10 B323 ROOTED DEBLOATED GAPPS
https://drive.google.com/file/d/0B5I_q70mNuR4a3FMV1RvYmlQNm8/view?usp=sharing
nice, good job does it contain google apps and services? asking since its based off the AL10 firmware.
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
jbmc83 said:
nice, good job does it contain google apps and services? asking since its based off the AL10 firmware.
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Click to expand...
Click to collapse
No, it's basically stock.
ajsmsg78 said:
No, it's basically stock.
Click to expand...
Click to collapse
So can I install it in L29?
i dont see why not. just beware that ull have to manually install google apps and services, since this is based off an AL10 rom.
rowihel2012 said:
So can I install it in L29?
Click to expand...
Click to collapse
You should be able to flash it over L29 in TWRP and it should work.
ajsmsg78 said:
You should be able to flash it over L29 in TWRP and it should work.
Click to expand...
Click to collapse
Thank you bro
So the Chinese stock recovery works with L29 ?
rowihel2012 said:
Thank you bro
So the Chinese stock recovery works with L29 ?
Click to expand...
Click to collapse
You really won't need the stock recovery once you flash twrp unless you want to go back to stock.
Could you explain Encrypted Boot/Decrypted boot ? I'm a new user from huawei.
This is awesome. Can one be made for the international ROM?
adriangb said:
This is awesome. Can one be made for the international ROM?
Click to expand...
Click to collapse
I make a Rom this weekend
adriangb said:
This is awesome. Can one be made for the international ROM?
Click to expand...
Click to collapse
If I could extract the system.img properly (I always get some kind of error on Windows or Linux using about 4 different tools) I would be able to modify it and make one.
ajsmsg78 said:
You really won't need the stock recovery once you flash twrp unless you want to go back to stock.
Click to expand...
Click to collapse
so the new twrp can flash img files like using fastboot?
and why twrp not reading the internal storage?
rowihel2012 said:
so the new twrp can flash img files like using fastboot?
and why twrp not reading the internal storage?
Click to expand...
Click to collapse
You need to flash the decrypted boot.img or the stock rooted decrypted rom I posted, then go into TWRP and wipe then format data. Then your internal storage will be recognized.
ajsmsg78 said:
You need to flash the decrypted boot.img or the stock rooted decrypted rom I posted, then go into TWRP and wipe then format data. Then your internal storage will be recognized.
Click to expand...
Click to collapse
good
if i wanna go back to the stock l29 rom after flashing the dectypted chines rom what should i do?i cant find any l29 stock rom to download
rowihel2012 said:
good
if i wanna go back to the stock l29 rom after flashing the dectypted chines rom what should i do?i cant find any l29 stock rom to download
Click to expand...
Click to collapse
It's posted here somewhere just search for it.
somboons said:
Could you explain Encrypted Boot/Decrypted boot ? I'm a new user from huawei.
Click to expand...
Click to collapse
is thai version does came with Gapps
i see review international china version its didnt came with Gapps
m3dd0g said:
I make a Rom this weekend
Click to expand...
Click to collapse
Tell me if you need help. I make my rom but for now my goal is to make a perfect TWRP. I'll publish this afternoon TWRP.
For my rom I've tuned a lot audio part and work with google stuff but I haven't a lot of time to follow rom
acer73 said:
Tell me if you need help. I make my rom but for now my goal is to make a perfect TWRP. I'll publish this afternoon TWRP.
For my rom I've tuned a lot audio part and work with google stuff but I haven't a lot of time to follow rom
Click to expand...
Click to collapse
I hope also i have time that weekend. You have used twrp source which i posted to build twrp?
Duckscreen said:
is thai version does came with Gapps
i see review international china version its didnt came with Gapps
Click to expand...
Click to collapse
It has Gapps.
Sent from my LG-D802 using Tapatalk
Hi @Yash98 ,
Any plans of getting H2 OS for this device. I was using it in OP2 and totally in love with it.
Thanks,
premjeeth said:
Hi Yash,
Any plans of getting H2 OS for this device. I was using it in OP2 and totally in love with it.
Thanks,
Click to expand...
Click to collapse
yes there are a stock Hydrogen os rom avaible
mauronofrio said:
yes there are a stock Hydrogen os rom avaible
Click to expand...
Click to collapse
Can we use the debloater of OP2 for this device as well?
premjeeth said:
Can we use the debloater of OP2 for this device as well?
Click to expand...
Click to collapse
i think yes
Have any of you found a rom/stock image of H2os for oneplus 3?
It's in oneplusbbs website. But the download speed is pathetically slow. I tried downloading twice, but it was reset halfway in between.
premjeeth said:
It's in oneplusbbs website. But the download speed is pathetically slow. I tried downloading twice, but it was reset halfway in between.
Click to expand...
Click to collapse
I wish I could understand anything on their website lol.
cesar.mk4 said:
I wish I could understand anything on their website lol.
Click to expand...
Click to collapse
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
It's this version..
OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596
premjeeth said:
It's this version..
OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596
Click to expand...
Click to collapse
Let me know what you find out, bud. I'm interested in this.
Post the link... U also need modded twrp to flash it
I would also want to try Hydrogen OS on OP3, hope it totally supports English. Anybody with the download link and procedure on how to install it.
I just tried installing it. I couldn't boot it though. The error I was getting, "Need to add google account" which I had already added.
The setup language is English, however the help text which appears are in Chinese. It still has quite a lot of Chinese characters on the keyboard as well.
Phate00 said:
Post the link... U also need modded twrp to flash it
Click to expand...
Click to collapse
Can I upload the ROM in Mega.nz and share the link here?
Here it is....
https://mega.nz/#!j4t3UBbC!9Gcq2VYTTMsQEWqn5n3Cr3lubh8xpwoRA9c1nHI3A1w
premjeeth said:
Here it is....
https://mega.nz/#!j4t3UBbC!9Gcq2VYTTMsQEWqn5n3Cr3lubh8xpwoRA9c1nHI3A1w
Click to expand...
Click to collapse
Thanks but I have to wait for proper twrp to flash
premjeeth said:
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
Click to expand...
Click to collapse
1,3 true. (and most probably 2 as well true)
I have heard that h2os has fix for fingerprint causing problem in pockets. Just one question though. Which one is better oos or h2os. I just can't seems to find the difference between the two
Sent from my ONEPLUS A3003 using Tapatalk
Finally flashed H2 OS successfully on my OnePlus 3.
Thanks to @Yash98 for the debloater and @Grarak for the TWRP.
The steps I followed:
Boot into TWRP (Grarak) and go to Wipe then Swipe to factory reset
Flash in this sequence:
1. ROM (OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596): Link in the above post
2. Debloater+SuperSU (H2OS_MM_DBLOATR+SuperSU.zip) - Thanks to @Yash98. (Please look in Official Hydrogen OS post in OnePlus 2 forums)
3. Open G-Apps (I've used Nano)
Enjoy.
premjeeth said:
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
Click to expand...
Click to collapse
Dash charging did work
I used Graraks twrp to flash it
Debloater did not try.
It has permission issues, permissions apps should have are not present in the system (onedrive does not have the media permission available, play services did not have a few as well after flashing google services in twrp)
standby battery life was freaking amazing. If permissions get sorted, I will DD it in a heartbeat
---------- Post added at 05:36 AM ---------- Previous post was at 05:34 AM ----------
premjeeth said:
Finally flashed H2 OS successfully on my OnePlus 3.
Thanks to @Yash98 for the debloater and @Grarak for the TWRP.
The steps I followed:
Boot into TWRP (Grarak) and go to Wipe then Swipe to factory reset
Flash in this sequence:
1. ROM (OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596): Link in the above post
2. Debloater+SuperSU (H2OS_MM_DBLOATR+SuperSU.zip) - Thanks to @Yash98. (Please look in Official Hydrogen OS post in OnePlus 2 forums)
3. Open G-Apps (I've used Nano)
Enjoy.
Click to expand...
Click to collapse
Can you install onedrive and see if photos backup for you? That is the most important item for me at the moment and when I flashed it it did not work correctly
Hello friends In this thread I am going to show you how to install Net Hunter on Honor 6X
To do this you need to root your device and make sure you have TWRP installed
Requirements:-
1.A rooted device
2.Twrp installed
3.Net Hunter.zip
To download it goto this link https://build.nethunter.com/nightly/
Then select the top latest folder.And then find nethunter-generic-arm64-kalifs-full-xxxxx.xxxxxxx.zip
Process:-
1.download the zip file to your sdcard
2.boot up to TWRP
3.click on Install zip
4.select the storage at which you have downloaded your file
5.select the file and swipe to install
6.click on reboot device
Note:-1.Ignore the error in red letters then restart you device
2.At first startup it will take a reboot again and it will take upto 1:30 sec to boot into your os
NOW YOU WILL HAVE YOUR NET HUNTER INSTALLED
Important Note:-
Check this thread which will fix all your problems after installation https://goo.gl/ZZGYWJ
Just click thank button which will help me to create new feeds
Is it a rom?
ridershahmir said:
Is it a rom?
Click to expand...
Click to collapse
No it's just a flash file which works on stock emui rom
Marella ram_youtubr said:
No it's just a flash file which works on stock emui rom
Click to expand...
Click to collapse
Still doesn't tell me what it is.
triggerlord said:
Still doesn't tell me what it is.
Click to expand...
Click to collapse
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter
Marella ram_youtubr said:
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter
Click to expand...
Click to collapse
What. Is. Nethunter.
Marella ram_youtubr said:
It is an nethunter installation file which you need to flash in TWRP recovery for installation of nethunter
Click to expand...
Click to collapse
You are supposed to post ROMs in this section. Not an app. It misleads people and ends up wasting 1-2 mins of many who assume it to be a ROM.
niki101 said:
You are supposed to post ROMs in this section. Not an app. It misleads people and ends up wasting 1-2 mins of many who assume it to be a ROM.
Click to expand...
Click to collapse
It's not an app it brings an another os to your phone which is called Kali it is linked to rom
triggerlord said:
What. Is. Nethunter.
Click to expand...
Click to collapse
It is nearly equal to os.It brings complete Linux environment with hacking tools to Android device
Marella ram_youtubr said:
It's not an app it brings an another os to your phone which is called Kali it is linked to rom
Click to expand...
Click to collapse
please post this as introduction to nethunter by editing your first post. Thanks for clarifying!
Disclaimer *sort of
Thanks for this! Don't listen to what other people say.. I'm even thankful that you posted it here..Makes things easier than using Linux Deploy.
Don't criticize others just because you don't know what Kali Linux is.. Don't use criticism to cover up your insolence and ignorance..
does it work with emui 5
Is it possible to install one of the nightly builds? Have a hunch the HID attacks are broken in this one (don't create the hid device on boot).
When I tried to grab the latest nexus 6 one on build.nethunter.com it said that the device wasn't supported. Any way around this?
Dude this is awesome! Never knew it works for our devices. Thanks!
BTW, forget what others are saying here. They're just lazy enough to not google, and let alone understand what Nethunter actually is.
Will it work on redmi 2 with cm13 as base?
Just want to add something:
BACK UP YOUR PHONE
and remove any fingerprint or pin/passwords before installing.
Rupamxx said:
Will it work on redmi 2 with cm13 as base?
Click to expand...
Click to collapse
No
nitheeshas said:
Dude this is awesome! Never knew it works for our devices. Thanks!
BTW, forget what others are saying here. They're just lazy enough to not google, and let alone understand what Nethunter actually is.
Click to expand...
Click to collapse
Thanks for supporting me.
Today i have compiled mac80211 modules and my wifi adapter modules.If you want module for your wifi adapter just specify your wifi adapter name
Rossonero224 said:
does it work with emui 5
Click to expand...
Click to collapse
It works but getting lots of bugs.Recomended not to install
hi there
i need kernel for my phone
or wifi driver to install it via twrp
my phone is huawei gr5 2017
my system is 7.0 nuaget
rooted via supersu.zip
my wifi chipset is 8188
it is mini wifi tp-link
model: tl-wn725n
if you can help me .. please do that .
I was searching for Xperia T3 custom ROMs and I didn't find any ROMs for it except for the stock ROM and the other ROM that I found, the guy said it wasn't tested if it was buggy. Also I never found a 7.0 ROM for it but I also found duplicate vids which were fake, because people said it in the comments. Guys will you develop a ROM for it or can I find the stable 6.0 ROM?
Written on the Xperia T3
I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you ?
rmnhg said:
I could help you getting LineageOS 14.1running. I did It with some help for Xperia E3 (now we are trying to fix camera)
You would need a new device tree repo, old vendor files adapted for Nougat, new kernel on 3.4.X...
Since I don't own this device I can't test so the work is more difficult but I can help you
Click to expand...
Click to collapse
I think those phones are cheap. Mines unlocked.
SonyXperiaUser14 said:
I think those phones are cheap. Mines unlocked.
Click to expand...
Click to collapse
? What do you mean?
rmnhg said:
? What do you mean?
Click to expand...
Click to collapse
I don't know. I can wait until someone makes a rom for it
Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!
ramitjames said:
Yes, even i searched for custom roms but cudnt find any.. Requesting for a custom rom...
Thnx!!!
Click to expand...
Click to collapse
I've started to port kernel on https://github.com/Sony-Yukon/android_kernel_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM
rmnhg said:
I've started to port kernel on https://GitHub.com/Sony-Yukon/android_sony_msm8226
And device on https://github.com/Sony-Yukon/android_device_sony_seagull
When I finish kernel, I will be able to build the ROM
Click to expand...
Click to collapse
Awesome!! Thank you...
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.
btdat2506 said:
Hi. I have a Sony Xperia T3, too. But my version is D5102, not D5103, and almost no one could create the rom for my D5102. Could you help me? Please!
Thanks, Dat.
Click to expand...
Click to collapse
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Here
rmnhg said:
Yes, my plan is to make the ROM compatible with all variants. But I need CPU-Z screenshots from stock ROM to know which sensors are working on this device.
I guess I could send you a TWRP recovery to test if kernel works.
Click to expand...
Click to collapse
Is there anything else you need?
btdat2506 said:
Here
Click to expand...
Click to collapse
Ok, that's the info I wanted.
Thank you.
btdat2506 said:
My D5102 doesn't have recovery partition so the recovery is placed in the /root. And it doesn't have bootloader update to run newer android version. Do you think is it possible to make my device (D5102) to run a newer androidm?
Click to expand...
Click to collapse
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
btdat2506 said:
Is there anything else you need?
Click to expand...
Click to collapse
Right now no, but maybe later I need more.
Thanks for helping
rmnhg said:
Ok, that's the info I wanted.
Thank you.
Thanks for this info too. I have Xperia E3 with two bootloader versions: stock and new one.
We are using stock to run LineageOS 14.1 and it doesn't have recovery support, but it has a partition named FOTAKernel which works as recovery partition. We can use it to store recovery and modify boot.img to launch it after pressing a volume key. We can also store recovery ramdisk on boot.img so we have solutions for this. Don't worry.
---------- Post added at 10:57 AM ---------- Previous post was at 10:55 AM ----------
Right now no, but maybe later I need more.
Thanks for helping
Click to expand...
Click to collapse
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?
btdat2506 said:
Also, i heard from my friend that because my device doesn't receive the bootloader update from sony but the d5103 does. Does this affect to the ability to run newer os?
Click to expand...
Click to collapse
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.
rmnhg said:
Hello guys,
I need a little help with this. As I don't own this device, I need information about its sensors. Could any of you install CPU-Z and take screenshots of all the tabs?
Thank you
Click to expand...
Click to collapse
Mine is d5102 as well.
Here are the screenshots.
Thanx.
rmnhg said:
I used to think that before but if you configure kernel ok it will boot on stock bootloader.
What I'm doing is to take device tree from all variants from stock kernel to create the new kernel. It should make it work with stock bootloader.
Click to expand...
Click to collapse
How's it going? Is it ok?
btdat2506 said:
How's it going? Is it ok?
Click to expand...
Click to collapse
I've not ported some drivers yet, this weekend I'll try to finish kernel.
EDIT: I will wait to start Christmas to continue the work because I'm a bit busy these days, I'm sorry.