Flashify - One (M8) Q&A, Help & Troubleshooting

Anyone tried Flashify to flash a rom, specifically ARHD? I'm not S-OFF but was able to update TWRP with Flashify. What do you think?
A bit more info:
I'm currently S-ON, unlocked via HTCDev and rooted with Hasoon2000 toolkit. Xposed is working well but can't install busybox.
Any help is greatly appreciated

trodinho said:
Anyone tried Flashify to flash a rom, specifically ARHD? I'm not S-OFF but was able to update TWRP with Flashify. What do you think?
A bit more info:
I'm currently S-ON, unlocked via HTCDev and rooted with Hasoon2000 toolkit. Xposed is working well but can't install busybox.
Any help is greatly appreciated
Click to expand...
Click to collapse
why dont you just flash with twrp?

jaythenut said:
why dont you just flash with twrp?
Click to expand...
Click to collapse
I could and probably will if nobody can advise if Flashify will work. I just like the simplicity of Flashify. I don't want to try it if the risk of a brick is quite high.

trodinho said:
I could and probably will if nobody can advise if Flashify will work. I just like the simplicity of Flashify. I don't want to try it if the risk of a brick is quite high.
Click to expand...
Click to collapse
Just use twrp nice and easy install rom on phone go to recovery flash easy peasy

jaythenut said:
Just use twrp nice and easy install rom on phone go to recovery flash easy peasy
Click to expand...
Click to collapse
That's what I did in the end. It was much simpler than on my HOX or desire! Thanks

trodinho said:
I could and probably will if nobody can advise if Flashify will work. I just like the simplicity of Flashify. I don't want to try it if the risk of a brick is quite high.
Click to expand...
Click to collapse
flashing a rom can not result in brick, hell you can even delete a rom and it doesnt brick . you are S-ON too.
be a man , flash it and try.
or not be one.

jags_the1 said:
flashing a rom can not result in brick, hell you can even delete a rom and it doesnt brick . you are S-ON too.
be a man , flash it and try.
or not be one.
Click to expand...
Click to collapse
I wasn't a man lol I used TWRP ? it's been working fine until I tried mounts2sd ?

jags_the1 said:
flashing a rom can not result in brick, hell you can even delete a rom and it doesnt brick . you are S-ON too.
be a man , flash it and try.
or not be one.
Click to expand...
Click to collapse
You are incorrect. Flashing the wrong rom can result in brick.
Sent from my HTC One_M8 using xda app-developers app

Related

I unlocked the bootloader using the official HTCDev tool. Now what?

What are the next steps in rooting? Follow the usual using Revolutionary? Install CWM manually?
Would appreciate your help folks!
Thanks
Agreed! With the bootlaoder now unlocked, what are the steps to rooting this beast? Do we still need to downgrade? Please pardon my noobness.
You wouldn't need to downgrade, I do know that. But as far as the rest, Idk. I did mine with revolutionary a while back before the 2.3.4 update, so I've been kicking ever since.
Sent from my Mikrunny'd Superphone using Forum Runner
I would see if you can install superuser from the market.
EDIT: I would also see if you can install CWM and ROM manager. If all those install ok you should be able to load a custom ROM.
HogFan77 said:
Agreed! With the bootlaoder now unlocked, what are the steps to rooting this beast? Do we still need to downgrade? Please pardon my noobness.
Click to expand...
Click to collapse
You do not have to downgrade if you unlocked. You should be able to install a new recovery image like Clockwork.
valorian13 said:
I would see if you can install superuser from the market.
EDIT: I would also see if you can install CWM and ROM manager. If all those install ok you should be able to load a custom ROM.
Click to expand...
Click to collapse
An unlocked bootloader does not equal root.
iNcorruptible said:
What are the next steps in rooting? Follow the usual using Revolutionary? Install CWM manually?
Would appreciate your help folks!
Thanks
Click to expand...
Click to collapse
I am in the same dilema....
---------- Post added at 10:19 PM ---------- Previous post was at 10:12 PM ----------
mza929 said:
I am in the same dilema....
Click to expand...
Click to collapse
This may point us in the right direction;
http://forum.xda-developers.com/showthread.php?t=1239821
If I run this, and unlock my incREDible2, what are my next steps to flashing/running some CM7.1 love? TIA
Installed CWM 5.0, superuser and after wiping data/cache and flashing a rom... Stuck at HTC White screen!
Flashed several roms, can't get passed it.
It's frustrating... No idea what to do next. I'm going to try flashing an earlier version of CWM and retry flashing a ROM.
Will update with progress.
iNcorruptible said:
Installed CWM 5.0, superuser and after wiping data/cache and flashing a rom... Stuck at HTC White screen!
Flashed several roms, can't get passed it.
It's frustrating... No idea what to do next. I'm going to try flashing an earlier version of CWM and retry flashing a ROM.
Will update with progress.
Click to expand...
Click to collapse
How long are you waiting bro..?
First. You should have not used the htcdev garbage. You should have used revolutionary.
That is all.
Sorry I can't help you. I use a ns4g. And that's all I know about the htcdev unlocker
Sent from my Nexus S 4G using XDA App
Over 30 minutes. Also tried flashing older version of CWM. Did not work. Will try restoring to stock with PG32IMG
Tried flashing back RUU, PB32IMG. Failed. Still stuck at HTC White screen. So much for unlocking the bootloader! No idea what to do next... help!
iNcorruptible said:
Tried flashing back RUU, PB32IMG. Failed. Still stuck at HTC White screen. So much for unlocking the bootloader! No idea what to do next... help!
Click to expand...
Click to collapse
When you flash a custom ROM from CWM on an unlocked HBOOT, you then need to manually extract the boot.img from the custom ROM zip file and manually flash it in Fastboot mode using the command
Fastboot flash boot [path to the boot.img file]
This has been documented multiple times in this forum.
tpbklake said:
When you flash a custom ROM from CWM on an unlocked HBOOT, you then need to manually extract the boot.img from the custom ROM zip file and manually flash it in Fastboot mode using the command
Fastboot flash boot [path to the boot.img file]
This has been documented multiple times in this forum.
Click to expand...
Click to collapse
thank you, i ran into the same problem....this worked
Appreciated. Tried it, didn't work Any other suggestions?
iNcorruptible said:
Appreciated. Tried it, didn't work Any other suggestions?
Click to expand...
Click to collapse
Yes in your case you will need to relock the bootloader in order to flash the RUU/PG32IMG.zip file. You cannot flash a RUU on an unlocked bootloader.
I'm guessing you guys have something other than .98 hboot? I'll find out soon when my wifes replacement comes in but I was not intending to use the HTC unlocker if I didn't have to. I was planning to try the tool attn1 has posted in the dev section unless the hboot changed with the ota.
Sent from my ADR6350 using xda premium
CondemnedSoul said:
I'm guessing you guys have something other than .98 hboot? I'll find out soon when my wifes replacement comes in but I was not intending to use the HTC unlocker if I didn't have to. I was planning to try the tool attn1 has posted in the dev section unless the hboot changed with the ota.
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
Still at Hboot 0.98!
iNcorruptible said:
Still at Hboot 0.98!
Click to expand...
Click to collapse
Good to hear kinda thought it was. I'll be using the method attn1 has posted then. I don't trust the unlock method through HTC for one main reason which is this... Unlocking bootloader and rooting voids warranty as we all know. So what happens when HTC knows your bootloader was unlocked because you used their tool and they have the serial number?
Sent from my ADR6350 using xda premium

[SOLUTION] So your Marvelc is refusing to flash a ROM

Okay I've been getting reports of roms not flashing right for the marvelc. So I set out for a solution and found one I believe. One issues with some roms, is that people have been doing it wrong since they got the phone. From Gsm recovery to even gsm roms. They used cmtd a very bad idea ect ect. So now, id like to present my method for fixing all of this. First, soff your hboot, then upgrade and unlock. install custom recovery and wipe all of the partitions. Then reboot to fastboot and flash the recovery posted bellow. Report back with any findings
http://goo.im/devs/simonsimons34/marvelc/cm9/tests/recovery.img
I was just wondering if you could give step by step instructions to flashing the recovery.img. File.
Download it. Rename to recovery.img. Place in the same directory as fastboot and adb.
Put your phone into fastboot (adb reboot bootloader).
Code:
fastboot flash recovery recovery.img
Simonsimons34 I have tried many things but this CWM actually let me flash a rom your great!! thanks so much and this worked for me
Glad to hear it this recovery has all the bugs with flashing and backups fixed so you should be good for the life of the phone
Sent from my Wildfire S A510c using Tapatalk 2
Does this fixes the Hboot not looking for PGIMG.zip files?
RRRb50 said:
Does this fixes the Hboot not looking for PGIMG.zip files?
Click to expand...
Click to collapse
No. A recovery can't fix HBOOT issue.
kalaker said:
No. A recovery can't fix HBOOT issue.
Click to expand...
Click to collapse
Is there a way to fix that?
Cause it dosnt check now.
RRRb50 said:
Is there a way to fix that?
Cause it dosnt check now.
Click to expand...
Click to collapse
Yes, but could you start another thread or link to a thread you've created. Let's keep this thread on-topic.
Isn't there a way to make it where it auto installs from hboot if so it'd help some ppl out ya know make it fool proof
Sent from my HTC-PG762 using XDA
sakisa950 said:
Isn't there a way to make it where it auto installs from hboot if so it'd help some ppl out ya know make it fool proof
Sent from my HTC-PG762 using XDA
Click to expand...
Click to collapse
brandonhun made one. http://forum.xda-developers.com/showthread.php?p=27765833#post27765833
Give him a "Thanks" if it helps you out.
kalaker said:
brandonhun made one. http://forum.xda-developers.com/showthread.php?p=27765833#post27765833
Give him a "Thanks" if it helps you out.
Click to expand...
Click to collapse
will it work with my problem and how to use it?
RRRb50 said:
will it work with my problem and how to use it?
Click to expand...
Click to collapse
Put on the root of your SD card. Put your SD card into your phone. Reboot your phone into HBOOT.
kalaker said:
Put on the root of your SD card. Put your SD card into your phone. Reboot your phone into HBOOT.
Click to expand...
Click to collapse
Tried that but didnt work.
When I go to HBOOT my mobile does not search for the PGIMG.zip files.
Is there a way to fix that?
I might make a thread if you say so.
RRRb50 said:
Tried that but didnt work.
When I go to HBOOT my mobile does not search for the PGIMG.zip files.
Is there a way to fix that?
I might make a thread if you say so.
Click to expand...
Click to collapse
Yes, please make a thread. It's best to keep this one on-topic.
RRRb50 said:
Is there a way to fix that?
Cause it dosnt check now.
Click to expand...
Click to collapse
Sorry to stray off-topic...
But you want to goldcard your sd card; that should help you with the old search engine
http://forum.xda-developers.com/showthread.php?t=1379543
Old Tut by Simon... 1-12 of s-off (OP) nets you a goldcard.
Sent from my HTC_A510c using Tapatalk 2
so far i have managed to get unlocked BL and s-off. i have flashed some GB roms, those are nice, i like the performance gains. one problem tho, i have to take this phone back to uscc because it is a loaner opps cant seem to help myself. i downloaded a ruu for wildfire s a510c <---my device however when i run the exe i get an error?? any help would be nice tnx
file i d/l::::RUU_Marvel_C_US_Cellular_WWE_1.02.573.00_Radio_0.94.00.0824_NV_USC_1.27_0826_PRL15107_release_219163_signed
To flash the RUU, You must Relock the bootloader first.
I can't be much help on returning the phone to s-on, other than to tell you it would take an image (before you s-off'd) and some jtag kung-foo skills
Not something easy.
Rob
Sent from my HTC_A510c using Tapatalk 2
insink71 said:
To flash the RUU, You must Relock the bootloader first.
I can't be much help on returning the phone to s-on, other than to tell you it would take an image (before you s-off'd) and some jtag kung-foo skills
Not something easy.
Rob
Sent from my HTC_A510c using Tapatalk 2
Click to expand...
Click to collapse
thanks so much for youre reply i do know some jtag kung foo skills! heh and fourteen other chinese words... this is my first ever time with an htc device! i have managed to learn a lot so far, my other device was a sgs flashed that sucker more times than girls gone wild! i am however anxiously awaiting my sgsIII
with that said, rock on with youre android device hacking...
p.s the rom i have is a stock rooted rom, of course custom kernel i added too, i can fool the uscc store upon return of the device except the phone info on lock bar ect says virgin mobile, i think its cool, but its gonna be hard to pull that one off i think lol
If you flash the RUU for your carrier it will give you a stock rom kernel and recovery so it won't say virgin mobile
Sent from my Marvelc using Tapatalk

[Q] goomanager

Doe anybody use goomanager to flash rom as it does not require pc to flash the rom. Any successful examples???
Go ahead and use it if you have S-OFF.
TToivanen said:
Go ahead and use it if you have S-OFF.
Click to expand...
Click to collapse
I tried it on S-ON. Flashed rom successfully without using PC. However, on s off u dont need goomanager either
goomanage
faddyie said:
I tried it on S-ON. Flashed rom successfully without using PC. However, on s off u dont need goomanager either
Click to expand...
Click to collapse
Have you sucess with app.zip ?
baolac said:
Have you sucess with app.zip ?
Click to expand...
Click to collapse
Sorry didnot get u.
Without s off you can't write boot partition and for changing roms that is required. That's just how it is.
TToivanen said:
Without s off you can't write boot partition and for changing roms that is required. That's just how it is.
Click to expand...
Click to collapse
But man i am telli.g u i did it with venom 3.7
Probably didn't need to change the boot.img for that. I bet when you install CM10.1 like that now you end up in a bootloop !
Mr Hofs said:
Probably didn't need to change the boot.img for that. I bet when you install CM10.1 like that now you end up in a bootloop !
Click to expand...
Click to collapse
If you're using a sense Rom, the stock boot.img will make it boot though you wouldn't get any of the tweaks.
Sent from my HTC One X using xda app-developers app
treebill said:
If you're using a sense Rom, the stock boot.img will make it boot though you wouldn't get any of the tweaks.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I know its like TT said, a boot.img can not be flashed from inside the running OS or via an app on the phone .... It must be done in fastboot. Its impossible unless you have s-off.
Like i stated, try another rom completely different and you will see it does not work.
Mr Hofs said:
I know its like TT said, a boot.img can not be flashed from inside the running OS or via an app on the phone .... It must be done in fastboot. Its impossible unless you have s-off.
Like i stated, try another rom completely different and you will see it does not work.
Click to expand...
Click to collapse
Roger. ☺

[Q] Re-root my desi

Hi all,
i bought htc desire, there was "alpharev hboot-6.93" and S-OFF ,but i think it's unroot
i want to root it back, and i tried many times with unrevoked and it's not working.
i tried to downgrade or flash to stock hboot from alpharev and it didn't take any changes
anyone can help me for the solutions
thanks
Just flash supersu through your custom recovery (which I'm assuming you have since you s-off'd. If you don't have one, let me know and I'll tell you how to get one.
Sent using xda-developers app
Chromium_ said:
Just flash supersu through your custom recovery (which I'm assuming you have since you s-off'd. If you don't have one, let me know and I'll tell you how to get one.
Sent using xda-developers app
Click to expand...
Click to collapse
u mean install supersu from SD card
i did it, installation succeed but it's still rooted
kuytaje said:
u mean install supersu from SD card
i did it, installation succeed but it's still rooted
Click to expand...
Click to collapse
Wasn't that what you wanted? To be rooted?
abaaaabbbb63 said:
Wasn't that what you wanted? To be rooted?
Click to expand...
Click to collapse
ohh sorry sir
i mean "unroot"
:victory:solved:victory:
i've followed this step
thanks for you all guys !!!:good:

[Q] How to get TWRP on D850?

Hello,
I have the att D850 that is still stock rooted. I now want to install TWRP on my device and flash since development for the g3 finally seems to be picking up I rooted with TowelRoot, and just want to know the best method of successfully installing TWRP on my device.
Any help is greatly appreciated.
Thanks!
jellybear456 said:
Hello,
I have the att D850 that is still stock rooted. I now want to install TWRP on my device and flash since development for the g3 finally seems to be picking up I rooted with TowelRoot, and just want to know the best method of successfully installing TWRP on my device.
Any help is greatly appreciated.
Thanks!
Click to expand...
Click to collapse
There is only one. Bump'd link http://forum.xda-developers.com/att-lg-g3/orig-development/bump-unlock-lg-g3-twrp-t2900569
Does this phone have a root indicator like the G2 did? In download mode I believe it was. And also in about phone it would say modified or something.
TheNetwork said:
Does this phone have a root indicator like the G2 did? In download mode I believe it was. And also in about phone it would say modified or something.
Click to expand...
Click to collapse
Using the phone dialer pad enter 3845#*850#. (Relace 850 with your variant). This allows you to enter the hidden menu. Look for LG RCT tag and display result. The content of the file will indicate whether G3 is rooted or not.
hwong96 said:
There is only one. Bump'd link http://forum.xda-developers.com/att-lg-g3/orig-development/bump-unlock-lg-g3-twrp-t2900569
Click to expand...
Click to collapse
Not true ... I installed my twrp with flashify
2SHAYNEZ
shayneflashindaily said:
Not true ... I installed my twrp with flashify
2SHAYNEZ
Click to expand...
Click to collapse
I have used flashify in the past. Is there a difference to using Flashify vs. Bump??
jellybear456 said:
I have used flashify in the past. Is there a difference to using Flashify vs. Bump??
Click to expand...
Click to collapse
I believe you can use flashily to flash an OEM (signed) ROM, or a 'bumped ROM'.
jellybear456 said:
I have used flashify in the past. Is there a difference to using Flashify vs. Bump??
Click to expand...
Click to collapse
Don't know I never used bump ... Just sis it with flashify when I got this phone like 2 weeks ago... Did a back up and flashed cloudy ... Wiped again and came back to stock rooted....
2SHAYNEZ
Just an update, I used the bump method successfully.
Thanks for your suggestions!
shayneflashindaily said:
Don't know I never used bump ... Just sis it with flashify when I got this phone like 2 weeks ago... Did a back up and flashed cloudy ... Wiped again and came back to stock rooted....
2SHAYNEZ
Click to expand...
Click to collapse
Went from stock recovery to TWRP using Flashify?
scorpiopantera said:
Went from stock recovery to TWRP using Flashify?
Click to expand...
Click to collapse
He used to flashify to flash bump is what he means.
p70shooter said:
He used to flashify to flash bump is what he means.
Click to expand...
Click to collapse
Yep. Just did it myself.
jellybear456 said:
I have used flashify in the past. Is there a difference to using Flashify vs. Bump??
Click to expand...
Click to collapse
Only noobs use Flashify, pros use the command line.
sprremix said:
Only noobs use Flashify, pros use the command line.
Click to expand...
Click to collapse
Oh, Cool Bro. I appreciate your unneeded input.
jellybear456 said:
Oh, Cool Bro. I appreciate your unneeded input.
Click to expand...
Click to collapse
"Is there a difference to using Flashify vs. Bump??"
You asked for input, and I gave you one. I told you the one difference between using the original Bump installation proces, and using a noob tool like flashify that does everything for you.
There is no difference between the two, they do the same stuff after all.
sprremix said:
"Is there a difference to using Flashify vs. Bump??"
You asked for input, and I gave you one. I told you the one difference between using the original Bump installation proces, and using a noob tool like flashify that does everything for you.
There is no difference between the two, they do the same stuff after all.
Click to expand...
Click to collapse
My original question was if there was a difference between using one over the other; If BUMP did something Flashify couldn't or vice versa. Not which one was the easiest to do or is "noob" friendly. Why go out of my way to use ADB on my PC when I can just download the TWRP img to my phone and flash it from the phone itself? Either way, this has been solved and I now have TWRP. Thanks for your input, anyways.

Categories

Resources