Hey, I'm running cm7 and I've been stuck on 1x for only god knows how long. I know there is 3g around because when I first got the phone it worked. After flashing different roms it seems to not want to connect to 3g anymore at all. Why is this?
Sent from my PC36100 using Tapatalk
call sprint and see if there is an outage
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Cares said:
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Click to expand...
Click to collapse
I think this may be my problem. I do roam sometimes when I never had before. What should I do in order to fix this?
I am pretty sure there isn't an outage because my friend on sprint has been tooling around on 3g.
I'm able to toggle between the 1x and 4g, but I can't connect to 3g. :-/
Sent from my PC36100 using Tapatalk
Bump.
I'm still having the same issue. Can anybody guide me through getting back to 3G? Would be much appreciated.
Sent from my PC36100 using Tapatalk
+1 .
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Seandeezy said:
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Click to expand...
Click to collapse
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
swagstr said:
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
Click to expand...
Click to collapse
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Seandeezy said:
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Eh.. I mighta been usin' Tiamat (this was like 4 mos ago).
This really works!
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
I have this problem occur on CM7 randomly as well. I just turn off mobile data for about 5 mins then turn it back on and it seems to fix the problem. Least till the next time.
mchristian said:
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Click to expand...
Click to collapse
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Seandeezy said:
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Click to expand...
Click to collapse
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
mchristian said:
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
Click to expand...
Click to collapse
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Seandeezy said:
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Click to expand...
Click to collapse
Yeah, I was pulling my hair out too. Happy it worked for you.
No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.
carlosaf1020 said:
No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.
Click to expand...
Click to collapse
Also I tried odin back to complete stock and the problem is still here. I tried flashing almost all the radios and still same problem
Get back to a TW ROM and open up the dialer and type
##72786#
Your phone will reboot, wait until it boots back up. It'll go through a small set up and you'll be prompted to reboot again. After the 2nd reboot you'll be on LTE/CDMA Mode. If you wanna change it open mobile network settings and change it to CDMA only
Hope this helps
Sent from my SPH-L710 using Tapatalk 2
AWESOME! It fixed it Thanks!!
i'm using t-mobile samsung galaxy s3 been using wicked rom version 3,7,9 and also try 10 with the installation process i choose the devian kernel or the stock kernel no change most of the items worked but gps wont lock no matter what i try i clear the maps cache remove it re-install it, try tight up the screws in the back of the device 3 times and try 2 other rom..no luck........................finally last night 5/24/13 i intall synergy rom(r484) android 4.12..gps work right the way..i wa also inside my place didnt really had to go outside..but cellphone signal kind low...any how any ideas about the wicked rom why gps wont lock i also try the gps quick fix..thank you
That is very hard to read.
GPS fix in my signature.
Aerowinder said:
That is very hard to read.
GPS fix in my signature.
Click to expand...
Click to collapse
yeahhhh i fixed it i fallow this link and now my gps worked fine using wicked rom v10
http://forum.xda-developers.com/showthread.php?t=2211690
after i go to the samsung service mode *#197328640#
then go to mainmenu>UMTS>Common>NV REBUILD>NV REBUILD>finish and dont exit menu
wait 30 sec
long press power button and select restart..
thats all
I recently tried Slim Bean on my Epic 4G Touch. It is nice, but I get no data. I am flashed to Page Plus, so I know to expect oddities. I have tried a number of modems with no success. I checked my data settings with *#*#DATA#*#* but found that several values were not set. I wanted to try to reset them over diag mode, but unfortunately these scripts are not working for me. I also tried using the Edit button in the hidden menu, but the I receive a "Modem Exception occurs" error.
Does anyone have any helpful info? Some of the TouchWiz roms aren't bad, but I would like to be able to use AOSP and still have data.
Macadamia Daze said:
I recently tried Slim Bean on my Epic 4G Touch. It is nice, but I get no data. I am flashed to Page Plus, so I know to expect oddities. I have tried a number of modems with no success. I checked my data settings with *#*#DATA#*#* but found that several values were not set. I wanted to try to reset them over diag mode, but unfortunately these scripts are not working for me. I also tried using the Edit button in the hidden menu, but the I receive a "Modem Exception occurs" error.
Does anyone have any helpful info? Some of the TouchWiz roms aren't bad, but I would like to be able to use AOSP and still have data.
Click to expand...
Click to collapse
Use a cm10 rom from around March of last year. I use wild for the night by dastin.
Then there are scripts you can run in a terminal. That's how I always do it at least.
Sent from my SPH-D710 using XDA Premium 4 mobile app
After the sim unlock on the dialer every time I'm trying to call a number I get this error.
This doesn't happen when I call. A contact thru the "call log" so basically I can't call anyone. I can call people only if they call me and are in call log.
Any help?
I've tried:
restarting
Clear cache in phone app
Get a new dialer app.
No use. Any advise?
Stock rooted lg 4.4.2 software
Sent from my LG-LS980 using Tapatalk
I believe this is because you need to add a 1 to your numbers before calling. Its random why. Some people have to, others don't. I suspect it's related to carriers. If that is your problem, use this app to add a 1 to all your contacts. https://play.google.com/store/apps/details?id=com.maplekeycompany.apps.numberfixer
Sent from my LG-LS980 using Tapatalk
brandonbarlow said:
I believe this is because you need to add a 1 to your numbers before calling. Its random why. Some people have to, others don't. I suspect it's related to carriers. If that is your problem, use this app to add a 1 to all your contacts. https://play.google.com/store/apps/details?id=com.maplekeycompany.apps.numberfixer
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yep thanks. That did the trick.
Also do you happen to know if this rooted phone will lose root or the unlock if I do a factory restore?
Stock Rom. No custom recovery. Did both local and permanent unlock.
Sent from my LG-LS980 using Tapatalk
4ringsa6 said:
Yep thanks. That did the trick.
Also do you happen to know if this rooted phone will lose root or the unlock if I do a factory restore?
Stock Rom. No custom recovery. Did both local and permanent unlock.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
As far as root...no...but with the unlock idk
Sent from my LG-LS980 using Tapatalk
4ringsa6 said:
After the sim unlock on the dialer every time I'm trying to call a number I get this error.
This doesn't happen when I call. A contact thru the "call log" so basically I can't call anyone. I can call people only if they call me and are in call log.
Any help?
I've tried:
restarting
Clear cache in phone app
Get a new dialer app.
No use. Any advise?
Stock rooted lg 4.4.2 software
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
try changing the network type to GLOBAL, that worked for me
You need to make changes in the build.prop file. check this thread out http://forum.xda-developers.com/showthread.php?t=2798566 and make the changes in the build.prop file. had the same problem, got it solved with these changes.
LS980 com.android.phone stop working
Dear all... all the work i have done is quite simple
Step One.
1. Reboot your Android device into Restore mode
2. Wipe cache data
3. Again reboot your Android device into Restore mode
4. restore/factory reset
5. power off phone
6. hard reset phone (volum UP + Power button)
hard reset your phone and enjoy... your OS must work fine now... i have done this with my LS980 sprint set...
reply
I flashed and unlocked my Sprint LG LS980 G2 to permanent GSM. Its working fine but the problem is that it does not see my contacts stored on my sim card and does not keep call logs. Also, any time I end calling or receiving call, it displays "Unfortunately, the process com.android.phone has stopped." Please help me somebody. God bless you