No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.
carlosaf1020 said:
No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.
Click to expand...
Click to collapse
Also I tried odin back to complete stock and the problem is still here. I tried flashing almost all the radios and still same problem
Get back to a TW ROM and open up the dialer and type
##72786#
Your phone will reboot, wait until it boots back up. It'll go through a small set up and you'll be prompted to reboot again. After the 2nd reboot you'll be on LTE/CDMA Mode. If you wanna change it open mobile network settings and change it to CDMA only
Hope this helps
Sent from my SPH-L710 using Tapatalk 2
AWESOME! It fixed it Thanks!!
Related
Ok, so I was running MIUI and I needed to do the 3g fix to get my data speeds up to par. Here are the steps I followed:
Go to the Market and download the app: MSL Reader
Use this app to get your MSL #
Flash to any GingerSense ROM (I used VR_GengerSense_Revolution_B4 with success. Has the nicest boot animation I have seen. ROM so pretty I stayed away from MIUI for a minute LOL.)
Launch phone dialer and dial ##DATA# (##3282#)
Select Edit Mode
Enter the MSL Number from above as the password
Select Data Profile
Press Menu button
Select Restore
Your phone will enter Commit mode and automatically reboot
Nandroid back to MIUI and enjoy better 3G speeds!
I got as far as commit mode, the phone didn't automatically reboot so I did it manually. The phone got stuck at the white screen where I pulled the battery, then just gave up and went back to MIUI. When I was back in MIUI, I saw I didn't have data at all! So then I went back to the GingerSense ROM and tried to do the data fix again, but to no avail. I have no 3g. When I am in the edit mode in data profile my username is blank, whereas there was something there before I tried to restore data. Are there any fixes for this?
Flash another sense rom snd see what you get
Sent from my PC36100 using XDA Premium App
Yes, try a different Sense ROM. I have performed this fix countless times with no issues and have recommended it with great success.
I'm not sure why your phone did not reboot on its own, but it should have. Flash back to Sense and update your profile Settings>Updates (I think) then perform the ##DATA# fix. While you are at it, update your Radio, etc. to the latest.
You guys were right! I just tried another sense rom and it worked like a charm! And updating my profile from settings gave my 3g back before I did the 3g fix
Hey, I'm running cm7 and I've been stuck on 1x for only god knows how long. I know there is 3g around because when I first got the phone it worked. After flashing different roms it seems to not want to connect to 3g anymore at all. Why is this?
Sent from my PC36100 using Tapatalk
call sprint and see if there is an outage
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Cares said:
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Click to expand...
Click to collapse
I think this may be my problem. I do roam sometimes when I never had before. What should I do in order to fix this?
I am pretty sure there isn't an outage because my friend on sprint has been tooling around on 3g.
I'm able to toggle between the 1x and 4g, but I can't connect to 3g. :-/
Sent from my PC36100 using Tapatalk
Bump.
I'm still having the same issue. Can anybody guide me through getting back to 3G? Would be much appreciated.
Sent from my PC36100 using Tapatalk
+1 .
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Seandeezy said:
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Click to expand...
Click to collapse
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
swagstr said:
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
Click to expand...
Click to collapse
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Seandeezy said:
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Eh.. I mighta been usin' Tiamat (this was like 4 mos ago).
This really works!
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
I have this problem occur on CM7 randomly as well. I just turn off mobile data for about 5 mins then turn it back on and it seems to fix the problem. Least till the next time.
mchristian said:
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Click to expand...
Click to collapse
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Seandeezy said:
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Click to expand...
Click to collapse
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
mchristian said:
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
Click to expand...
Click to collapse
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Seandeezy said:
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Click to expand...
Click to collapse
Yeah, I was pulling my hair out too. Happy it worked for you.
[Q] SGH-T989 will not boot past samsung black screen after running "AutomatedDebloat"
I rooted my T-Mobile SGH-T989 Android 4.0.4 using "Odin/Clockwork Mod" success! Yeah!
I then ran "AutomatedDebloat.bat" which did nothing as far as removing T-Mobile crap/bloat ware.
Now my phone will not boot past the "flashing" Samsung logo black screen.
I can boot to "CWM-based Recovery v5.0.2.6.
This is my first attempt at this level of phone mod and at this point I do not want to try anything else without some expert assistance.
Thanks in advance.
If you can get into recovery try wiping dalvik and wiping cache then reboot. If this does not work you can : A) factory reset B) put rom on ex card and install new rom or C) use odin to flash new rom. Try one of these options.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
If you can get into recovery try wiping dalvik and wiping cache then reboot. If this does not work you can : A) factory reset B) put rom on ex card and install new rom or C) use odin to flash new rom. Try one of these options.
thanks for your response and assistance. 1st I ran thru my previous actions after the root again and then flashed with JMTX3. I can now access the phone.
Now for the 2nd problem, I cannot access the internet with this phone. Wifi is Ok but unlike my other Android phones this one refuses to connect to the internet no matter what I do.
I am sure it it a T-imMobile issue but I have had no success with resolving this.
Click to expand...
Click to collapse
Had the same problem before try a new radio like UVLE1 etc. Or try a new kernel it should connect to wifi after you change one of these or both.
Sent from my SGH-T989 using Tapatalk
puuyai_bahn said:
thanks for your response and assistance. 1st I ran thru my previous actions after the root again and then flashed with JMTX3. I can now access the phone.
Now for the 2nd problem, I cannot access the internet with this phone. Wifi is Ok but unlike my other Android phones this one refuses to connect to the internet no matter what I do.
I am sure it it a T-imMobile issue but I have had no success with resolving this.
Click to expand...
Click to collapse
Try setting up your APN manually or change a radio.
re: no internet with SGH-T989
android88 said:
Try setting up your APN manually or change a radio.
Click to expand...
Click to collapse
I think I have muddied the waters a bit.
This phone has always had access to wifi and does now. For years my previous phones were HTC Android. To access mobile networks it was "Settings" - "Wireless & Networks" - "Mobile Network" - "Connect" and I was connected. The APN settings filled in automatic. What's up with Samsung or am I just being thick?
re:SGH-T989 will not boot past samsung black screen after running "AutomatedDebloat"
puuyai_bahn said:
I think I have muddied the waters a bit.
This phone has always had access to wifi and does now. For years my previous phones were HTC Android. To access mobile networks it was "Settings" - "Wireless & Networks" - "Mobile Network" - "Connect" and I was connected. The APN settings filled in automatic. What's up with Samsung or am I just being thick?
Click to expand...
Click to collapse
Problem Solved!
I had created a new APN before the root that did not work.
Created the new APN after the root and SUCCESS!
Thanks for the help!
I assume that the U.S. cellular version of this phone is a lot like the Sprint version, so I was hoping one of you could help me.
This has also been posted on the Team US Cellular forum: http://teamuscellular.com/Forum/topic/3446-phone-cant-access-mobile-data-now-stuck-on-activating/
I had been running my phone on Liquid Smooth for a day or two now, and today I turned on and off my phone a few times because I started to run low on battery and needed the phone later. Then, when I turned it on it said I was in recovery mode and all of my widgets were off of my homescreens. Now, the phone can't connect to mobile data or wifi so I cannot make phone calls, receive text messages or go on the internet. I then proceeded to attempt to wipe the cache, dalvik cache, and factory reset the phone through Clockwork Recovery, and when the phone booted up, it still could not connect to anything and now it is stuck on "Activating..".
At this point, I just want to return my phone to normal without root and get my service back. Could anyone please help me quickly? I need to use my phone by Monday... Thanks!
Also the phone signal thing has an R next to it, if that means anything to any of you all.
The "R" stands for Roaming, to into settings - mobile data - network operators - find your carrier. Hope that helps!
Sent with my Google Nexus 7 through the XDA Developers APP.
You need to flash a stock/stock-based ROM and follow the activation through
Then you can flash back or unroot, most likely what happened is that you either A) restored data (sometime gives weird problems) or B) didn't wipe completely/enough
Dr.Molestratus said:
The "R" stands for Roaming, to into settings - mobile data - network operators - find your carrier. Hope that helps!
Sent with my Google Nexus 7 through the XDA Developers APP.
Click to expand...
Click to collapse
CNexus said:
You need to flash a stock/stock-based ROM and follow the activation through
Then you can flash back or unroot, most likely what happened is that you either A) restored data (sometime gives weird problems) or B) didn't wipe completely/enough
Click to expand...
Click to collapse
A very nice user on Team US Cellular helped me out one on one, I have managed to unroot the device and bring it back to stock through download mode, and will not have to bring it into a US Cellular store to get my number back on it. Thanks for the help!
BloodyRory said:
A very nice user on Team US Cellular helped me out one on one, I have managed to unroot the device and bring it back to stock through download mode, and will not have to bring it into a US Cellular store to get my number back on it. Thanks for the help!
Click to expand...
Click to collapse
This happened to me on sprint. They couldn't fix it and I had to exchange my phone for a new one
Sent from my SPH-L710 using Tapatalk 2
I brought it into the store today and they didn't know what to do. They factory restored the phone again and managed to get signal (the signal bar as a triangle next to it), but whenever I try to activate the phone, it tries to activate it on Verizon. I did not flash the wrong rom, I know that. Is there any way to fix it right now or do I have to wait until tomorrow until I can take it to their tech guys at a different location? Thanks.
Last night I loaded the rom hyper drive and it was working fine but after a reboot it would just bootloopso I refreshed with a different kernel(the stock one from aroma) from them on the phone will load but with no network connection. I tried every rom I could get my hands on (about 6) from AOSP to samsung base and everyone has no connection. My last resort was to restore using the unroot method which worked fine but I still have no network connection... What can I do?
joshuadjohnson22 said:
Last night I loaded the rom hyper drive and it was working fine but after a reboot it would just bootloopso I refreshed with a different kernel(the stock one from aroma) from them on the phone will load but with no network connection. I tried every rom I could get my hands on (about 6) from AOSP to samsung base and everyone has no connection. My last resort was to restore using the unroot method which worked fine but I still have no network connection... What can I do?
Click to expand...
Click to collapse
Can you try to update the profile and prl?
Maybe also try to flash the modem.
jdelano said:
Can you try to update the profile and prl?
Maybe also try to flash the modem.
Click to expand...
Click to collapse
how do you update the profile and prl?
once a TW ROM has booted. Click Settings -> System Update -> Update Profile and Update PRL are in that menu.
I hope that works for you.
If that doesn't work, there's a dialer code somewhere that will force a reactivation, just make sure you're on a wifi network
##72786#
jdelano said:
##72786#
Click to expand...
Click to collapse
That ^
There are known issues with the Sprint version of Hyperdrive right now...the developer is working on a fix for this ....so I would just flash something else until a fix is released ....because reactivating the phone doesn't work...but they said dirty flashing it gets your DATA back but I don't recommend that.....this often happens with Roms that are released for Multi Carriers.
Sent from my SPH-L710 using xda app-developers app