Develop Bugs

[Q] Bad data profile update, no internet

Hi, I decided to flash over to a sense rom and update my Data Profile and PRL.
The Data Profile and PRL gave me a 1012 error(Think that's right) and would not update them.
After I got the error on both of them, My internet stopped working.
Last time this happened sprint had me ##data# and reset my profile.
I do not remember what they had me do.
Can anyone help me fix or reset my Data Profile so that I can get data back?
Thanks

Did you do a nandroid back up of you stock rom? try flashing that back after clearing everything except sd card in recovery. If you did not do a back up of stock rom down load to your computer one from the forum like brads stock rom or fipmodz rom the then transfer to your sd card and flash see if that wors you can do your updates in those.

xNotta said:
Hi, I decided to flash over to a sense rom and update my Data Profile and PRL.
The Data Profile and PRL gave me a 1012 error(Think that's right) and would not update them.
After I got the error on both of them, My internet stopped working.
Last time this happened sprint had me ##data# and reset my profile.
I do not remember what they had me do.
Can anyone help me fix or reset my Data Profile so that I can get data back?
Thanks
Click to expand...
Click to collapse
You can read this post and see if it helps.
http://forum.xda-developers.com/showpost.php?p=7027238&postcount=1
Should get you back up and running.

Thanks for the replies.
I fixed it by downloading another rom (From shipped-roms.) and flashed it.
Went into update PRL and Profile and they both updated without any issues.
I now have internet back on CM
Apparently the sense rom I flashed the first time has something wrong with it.
Even though their post said all they did was add su/root.
I tried the bad rom again and I am still getting the "-1012 error" and it still breaks internet.
If anyone else has this problem, download the stock rom from a more trusted source, not a random users forum post on here. Then try to update.
Thanks again.

xNotta said:
Thanks for the replies.
I fixed it by downloading another rom (From shipped-roms.) and flashed it.
Went into update PRL and Profile and they both updated without any issues.
I now have internet back on CM
Apparently the sense rom I flashed the first time has something wrong with it.
Even though their post said all they did was add su/root.
I tried the bad rom again and I am still getting the "-1012 error" and it still breaks internet.
If anyone else has this problem, download the stock rom from a more trusted source, not a random users forum post on here. Then try to update.
Thanks again.
Click to expand...
Click to collapse
That link was to Calkulin's Flashable zip for the Radios. I have used it and can verify it as a valid method of updating. What rom did you use the first time that was bad? Just for curiosity reasons.

And if it happens, just call sprint, they can force push a prl and profile update to the phone, if you are on a sense (preferably stock) rom obviously.

[Q] No data or service

No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.

carlosaf1020 said:
No data or service tried installing the jellybro 3.0 or whatever it's called and tried flashing back and now I don't have any data or service.
Click to expand...
Click to collapse
Also I tried odin back to complete stock and the problem is still here. I tried flashing almost all the radios and still same problem

Get back to a TW ROM and open up the dialer and type
##72786#
Your phone will reboot, wait until it boots back up. It'll go through a small set up and you'll be prompted to reboot again. After the 2nd reboot you'll be on LTE/CDMA Mode. If you wanna change it open mobile network settings and change it to CDMA only
Hope this helps
Sent from my SPH-L710 using Tapatalk 2

AWESOME! It fixed it Thanks!!

My internet data frequently disconnected

Hello,
i am back again with a new problem!
All the previous problems that was mentioned in this forum is GONE. i was a happy owner. Until i got this problem.
so i wanted to try new Modem, just so i can increase my Signal, and right now, my data plan is keep going on and off, and most the time i can't get it connected it.
i did the wipe date /factory reset from the ROM manager, and wipe cache and dalvik. and yet the problem is not solved.
right now, am running cm-10.1-20130304-EXPERIMENTAL
and the Modem am currently running which sometimes works ( I747MVLDLK4 ) am with Rogers, Canada, Edmonton, AB
If anyone helped me out with this, your next coffee is on me! for real!

anyone?

When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.

CZ Eddie said:
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
Click to expand...
Click to collapse
Thanks man, i really hope it works! , am gonna try this now.. When i restore to the stock, dose my based band goes to default or shall i manually do that?

just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....

MH_91 said:
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
Click to expand...
Click to collapse
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?

hednik said:
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
Click to expand...
Click to collapse
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.

MH_91 said:
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
Click to expand...
Click to collapse
What type of fail error?
How are you trying to flash it?

i managed to make my modem into the stock version. However am just getting "E" in my data connection. Reminder am still in STOCK ROM and stock modem now. is that a good sign that i slighty getting everything back??
should i just install the CM 10.1 now and see the results or what you guys recommend?

annnnnnnnnd my " E" is gone.. Beautiful
do you guys think it might be a actual physical sim card issue?

UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!

Try flashing Task's AOKP and see if you have the same issue. Additionally, try deleting the current APNs (access point names) and manually enter the APN settings for your carrier. Could also just be a faulty SIM card as you mentioned.
Sent from my SGH-I747 using xda app-developers app

MH_91 said:
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Click to expand...
Click to collapse
You have your imei still ? I don't see that mentioned.... this sounds like that issue. flashing between TW and Custom it can happen

Thanks guys for the feedback, but i have managed to fix the problem, this post was before i know that i lost my IMEI...
All good now, everything has be resolved.
cheers,

[Q] Lost LTE after switching to KitKat

I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3

joeyhdownsouth said:
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3
Click to expand...
Click to collapse
Flashed Wicked Sensations last night with the MK3 modem and I seemed to be getting LTE as soon as that booted. Updated my PRL and Profile, and then wiped. Installed AOSB again, and I seemed to be getting LTE until I rebooted. After the first reboot I seem to be stuck in 3G again.

Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3

joeyhdownsouth said:
Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3
Click to expand...
Click to collapse
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.

snak1e said:
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.
Click to expand...
Click to collapse
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.

ShrekOpher said:
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.
Click to expand...
Click to collapse
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh

snak1e said:
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh
Click to expand...
Click to collapse
KitKat roms are currently having data issues. You could try backing up your current KK rom and go back to Stock, update prl and backup your DNS settings then go back to your backed up KK rom and restore from the dns settings you backed up.

How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk

TheManiac said:
How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk

djpabz23 said:
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
It says something to do with missing a partition?
Sent from my SPH-L710 using Tapatalk

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
ohhh i had this issue but i figured it out for pacman and most roms just download nova launcher and when you do create a shortcut on nova ad click on setting an it should say apn once there u open it and youll see where it says ehprd something like that click on it and go all the way to the bottom and change where it says bearer to ehrpd and lte should work ^_^

Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.

snak1e said:
Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.
Click to expand...
Click to collapse
How did you update your APN's?

try switching to philz touch recovery where it will give you 2 options....do clean to install a new rom.....if works....thks appreciated...safe flashing and live prosperous

djpabz23 said:
How did you update your APN's?
Click to expand...
Click to collapse
This should work http://forum.xda-developers.com/showthread.php?t=1794956

Can't make calls out (Random only on network mode WCDMA/GSM (Auto Connect)

Hi.
I have a Samsung Galaxy S3 T999 model on carrier T-mobile. Lately the phone has gone nuts and will get stuck on dialing out and will never make the call. Everything else works fine. Sometimes I have to soft reset, pull the battery and that will fix it for a call or two, then it will get stuck again. I have contacted T-mobile about this over 5 times and none of them can help. We tried to change the sim, reset the account. Etc and nothing. I have reset the cache, factory reset and even put in a good working sim card from another phone and the same problem comes up. During my latest troubleshooting I have narrowed it down to where I switch "network mode" to GSM only and that can make calls out all the time, but the data stays on E (which then I can't use the internet because it's so slow) When I switch back to auto I am sometimes able to place calls again, but only a few. After I test a few calls and leave the phone for a few minutes the phone will get stuck back on not making calls out and just saying "dialing".
Has anyone had the same problems or know of a fix? Currently I have been trying to flash the modem to different versions to see if that fixes the problem. The first two modems I have flashed did not work and came up with "unknown baseband".
If anyone can help I greatly appreciate it.

This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk

serio22 said:
This is a known issue with 4.3.. What firmware are you on? Assuming you flashed the correct baseband for your device, the 'unknown baseband' message sounds like you are in 4.3 but what build? You can't flash any modems successfully less than 4.3
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I was previously on 4.1.2 when the problem first started. I updated it to 4.3 and still the same problem.
jss15j.t999uvuenc2 build. (I put this one back on last night so at least I can use the phone today when I am at work)
I was just hoping that the device didn't go bad when it was on 4.1.2 because it was working just fine before the problem started.

Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk

serio22 said:
Was it official update to NC2 by OTA/Odin or you just flashed a ROM?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
NC2 was OTA. After doing some searches it said that OTA could of been corrupt, so I went and downloaded KIES and did a reinstall that way.
When I upgraded to 4.3 I tried that default baseband out and had the same problems. That is when I was searching on google and came across this forum and also the thread about flashing modems.

What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)

Perseus71 said:
What APN (Access Point Name) are you on ? Also what is your Preferred Network Type set to ? Its located in Settings > More I think.(I don't use Stock Firmware)
Click to expand...
Click to collapse
APN is epc.tmobile.com
Network Mode current set to GSM (the only way I can make calls out without the problem occuring)
WCDMA/GSM (Auto Connect) is what it should be on so my data is at 4G, but the calls is the problem here

I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?

Perseus71 said:
I am not sure but can you check the settings of the Dialer to see if there is ways to choose Lookup providers ?
Click to expand...
Click to collapse
Nope don't see anything in the dialer about selecting a provider..

Its supposed to be something about Choose Lookup Providers. At least that's the way it is on AOSP.

I suggest Odin flashing the stock NC2 firmware and then factory resetting from stock recovery. (Backup first of course!) If it is still an issue, it will most likely be a hardware problem. From what you have said so far, I believe that you will find this to be the case. Could've been due to damage from a drop, or even overheating at some point. Or it could just be that its simply due to hardware degradation over time.