Related
hello !
I was a new person and P6 is my first smartphone, however through xda forums I have root and install CWM + TWRP DC . Recently I have updated to the last B506 kk "local update" and install twrp_2_6_3_7 success . But I'm not happy about the B506 should have been lowered by 125 local update . And the problem happened : my phone can not work always reboot into TWRP recovery . I rom via TWRP is the error message :
skip md5 check : no md5 file not found .
detailed partition zip update flashing error ' external_sd/B506.zip '
e : signature verification failed zip 1 .
I tried many ways but failed my phone hangs on TWRP. Finally I B506 stock rom of surdu_petru and success.
But now my phone is lost flower icon instead Huawei ANDROID letters and several other errors. Simultaneously could not pass local rom update, I still get md5 error when using TWRP rom. I want to reinstall rom 125. Who can tell me what my problem is? and one way or another?
Sorry for my english capital!
Try first to get back stock recovery. With TWRP you can't flash stock firmware.
thank god I did downgrade from B506 to B125
downgrade
beshert said:
thank god I did downgrade from B506 to B125
Click to expand...
Click to collapse
hi, can you please share how did you successfully downgrade the phone . I am starving to see old themes and speed again
Regards
smoothumut said:
hi, can you please share how did you successfully downgrade the phone . I am starving to see old themes and speed again
Regards
Click to expand...
Click to collapse
I installed the stock recovery from TWRP and install new rom from sdcard / dload by POWER VOLUME + VOLUME -
From hottp://huaweinews.com/2014/03/ascend-p6-b506-kitkat-firmware
mansoor April 5, 2014 at 10:13 pm
===============================================================================
Downgrade from B506 to B125
===============================================================================
NOTE: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
1. Download P6_Unicom_EMUI2.0.rar (hottp://bit.ly/1hhwXCX) – Click Blue button
showing down-arrow to start download.
2. Download B125 (hottp://dl-uk.huaweinews.com/Roms/Ascend-P6/B125.zip)
3. Create dload folder in SD Card
===============================================================================
4. Extract First Downloaded file (P6_Unicom_EMUI2.0.rar), put UPDATE.APP file (243MB approx.)
in newly created dload folder.
5. Backup Data from Internal Storage (will be deleted after downgrade)
6. Go to Setting > Updates > System Updates > Local Updates
7. Click Confirm
8. Phone will restart into recovery and start the update process.
===============================================================================
9. After restarting the phone, delete UPDATE.APP (243MB) file from dload folder of SD Card.
10. Extract second downloaded file (B125.zip), put UPDATE.APP file (1.52GB) into dload folder
of SD Card.
11. Repeat the process from 6 – 7
12. Phone will restart into recovery and update process will start.
===============================================================================
13. After update phone will restart, at this moment you phone may stuck on Huawei Logo,
Don’t panic, just hold the Power button until Huawei logo disappear.
14. After disappearing of Huawei logo, Immediately press the [ Vol + , Vol - and Power button ]
altogether and keep holding them until you see the recovery screen, release the buttons to
start the update process again, after that your phone will restart normally.
15. Now you have the Official Version of Jelly Bean 4.2 on your Huawei P6-U06.
===============================================================================
Note: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
---------- Post added at 09:38 PM ---------- Previous post was at 09:32 PM ----------
This will not work because 4.4 will not allow you to downgrade back to 4.2 without help.
You first have to "fix" kitkat 4.4 by using the "P6 Unicom EMUI2.0 back in the subcontract.zip" utility as explained in my previous post to allow it to be downgraded again.
beshert said:
I installed the stock recovery from TWRP and install new rom from sdcard / dload by POWER VOLUME + VOLUME -
Click to expand...
Click to collapse
Can you help me, I did this to downgrade but my phone is now stuck on huawei logo
At which step did your phone get stuck on the logo?
What steps did you follow?
dakifil said:
Can you help me, I did this to downgrade but my phone is now stuck on huawei logo
Click to expand...
Click to collapse
Falcifer said:
At which step did your phone get stuck on the logo?
What steps did you follow?
Click to expand...
Click to collapse
It's OK. I forced restart and then phone updated again and it is working now.
Falcifer said:
From hottp://huaweinews.com/2014/03/ascend-p6-b506-kitkat-firmware
mansoor April 5, 2014 at 10:13 pm
===============================================================================
Downgrade from B506 to B125
===============================================================================
NOTE: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
1. Download P6_Unicom_EMUI2.0.rar (hottp://bit.ly/1hhwXCX) – Click Blue button
showing down-arrow to start download.
2. Download B125 (hottp://dl-uk.huaweinews.com/Roms/Ascend-P6/B125.zip)
3. Create dload folder in SD Card
===============================================================================
4. Extract First Downloaded file (P6_Unicom_EMUI2.0.rar), put UPDATE.APP file (243MB approx.)
in newly created dload folder.
5. Backup Data from Internal Storage (will be deleted after downgrade)
6. Go to Setting > Updates > System Updates > Local Updates
7. Click Confirm
8. Phone will restart into recovery and start the update process.
===============================================================================
9. After restarting the phone, delete UPDATE.APP (243MB) file from dload folder of SD Card.
10. Extract second downloaded file (B125.zip), put UPDATE.APP file (1.52GB) into dload folder
of SD Card.
11. Repeat the process from 6 – 7
12. Phone will restart into recovery and update process will start.
===============================================================================
13. After update phone will restart, at this moment you phone may stuck on Huawei Logo,
Don’t panic, just hold the Power button until Huawei logo disappear.
14. After disappearing of Huawei logo, Immediately press the [ Vol + , Vol - and Power button ]
altogether and keep holding them until you see the recovery screen, release the buttons to
start the update process again, after that your phone will restart normally.
15. Now you have the Official Version of Jelly Bean 4.2 on your Huawei P6-U06.
===============================================================================
Note: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
---------- Post added at 09:38 PM ---------- Previous post was at 09:32 PM ----------
This will not work because 4.4 will not allow you to downgrade back to 4.2 without help.
You first have to "fix" kitkat 4.4 by using the "P6 Unicom EMUI2.0 back in the subcontract.zip" utility as explained in my previous post to allow it to be downgraded again.
Click to expand...
Click to collapse
Hi,
I am running OmniRom 4.4.3, and I can't find "Setting > Updates > System Updates > Local Updates", is there any other alternative?
Thanks
iye81 said:
Hi,
I am running OmniRom 4.4.3, and I can't find "Setting > Updates > System Updates > Local Updates", is there any other alternative?
Thanks
Click to expand...
Click to collapse
You can't update to stock firmware from a custom ROM. You need to install stock recovery and use three button combo to update.
Lähetetty minun HUAWEI P6-U06 laitteesta Tapatalkilla
Falcifer said:
From hottp://huaweinews.com/2014/03/ascend-p6-b506-kitkat-firmware
mansoor April 5, 2014 at 10:13 pm
===============================================================================
Downgrade from B506 to B125
===============================================================================
NOTE: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
1. Download P6_Unicom_EMUI2.0.rar (hottp://bit.ly/1hhwXCX) – Click Blue button
showing down-arrow to start download.
2. Download B125 (hottp://dl-uk.huaweinews.com/Roms/Ascend-P6/B125.zip)
3. Create dload folder in SD Card
===============================================================================
4. Extract First Downloaded file (P6_Unicom_EMUI2.0.rar), put UPDATE.APP file (243MB approx.)
in newly created dload folder.
5. Backup Data from Internal Storage (will be deleted after downgrade)
6. Go to Setting > Updates > System Updates > Local Updates
7. Click Confirm
8. Phone will restart into recovery and start the update process.
===============================================================================
9. After restarting the phone, delete UPDATE.APP (243MB) file from dload folder of SD Card.
10. Extract second downloaded file (B125.zip), put UPDATE.APP file (1.52GB) into dload folder
of SD Card.
11. Repeat the process from 6 – 7
12. Phone will restart into recovery and update process will start.
===============================================================================
13. After update phone will restart, at this moment you phone may stuck on Huawei Logo,
Don’t panic, just hold the Power button until Huawei logo disappear.
14. After disappearing of Huawei logo, Immediately press the [ Vol + , Vol - and Power button ]
altogether and keep holding them until you see the recovery screen, release the buttons to
start the update process again, after that your phone will restart normally.
15. Now you have the Official Version of Jelly Bean 4.2 on your Huawei P6-U06.
===============================================================================
Note: Downgrading will remove your user files, settings and all the data on Internal Storage
===============================================================================
---------- Post added at 09:38 PM ---------- Previous post was at 09:32 PM ----------
This will not work because 4.4 will not allow you to downgrade back to 4.2 without help.
You first have to "fix" kitkat 4.4 by using the "P6 Unicom EMUI2.0 back in the subcontract.zip" utility as explained in my previous post to allow it to be downgraded again.
Click to expand...
Click to collapse
Hi guys
i cant download @ this site http://dl.vmall.com/c01l4l4a2y# please send a proper link thanks!
Good tutorial
Thanks a lot its working for my B506, now I have B510.
For anyone else interested in a completely stable update and speed,battery,gps improvements try http://forum.xda-developers.com/showpost.php?p=54717666&postcount=8
For those who have flashed kitkat on their devices and have an update fail, here is the solution!
1. Download this UPDATE.APP file and unzip to your phone.s sdcard in the dload directory:
2. Shut down your phone.
3. Power on by holding Power+Vol Up+Vol Down end release all the keys as soon as the Huawei logo appers.
4. The phone will upgrade some files from the file you downloaded and boot into your KitKat 4.4
5. Put your B125 UPDATE.APP in the dload directory of your sdcard. Maybe 1st rename the current fallback UPDATE.APP to e.g. UPDATE.APP.fallback should you ever need it again to downgrade. (here is a very fast download link:
6. Shut down your phone and boot it with the 3 keys (remember to release the keys as soon as the logo appears) to downgrade your firmware.
and.. DONE!!
LINKS::
Here are the links!
little update: dl.vmall.com/c01l4l4a2y
b125 update: dlbase.huaweiblog.de/data/_uploaded/downloads/files/Ascend%20P6/Firmware/B125.rar
PLEASE!
I have an International version of ascend p6 -06 with B107.
I was trying to install kitkat into it.Its rooted.
I downloaded the UPDATE.APP from one of the forums.I installed twrp and I thought I can use to flash the new ROM using it,but I couldnt find the option,I read somewhere only the zip files can be installed through TWRP. Whenever I press the volume+ + volume- + power button,the phone starts with the TWRP directly than doing any update .I have put the UPDATE.APP file in dload folder in my SD card,still it was not updating with that given shortcut.
I did a stupid thing just now,I wiped all datas using TWRP and now i have no OS installed ,and like that my phone is bricked.now if i switch on the phone it gets stuck at huawei ascend Logo.and if i press volume up and down buttons along with power button,then it goes to TWRP ..
pls pls pls help me ,and thanks a ton in advance.
I even tried downloading the the original rom from the huawei website and still not able to update using that UPDATE.APP file...
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
can u help me with starting adb.
blueIBI said:
don't panic..
you habe to set your phone into bootloader mode..push power and Volumen + (or -) together and hold them for about 5sec until you See the huawei ascend Logo (it stucks there - thats OK)..
then Connecticut your p6 to the pc and Start your ADB..
depending what Firmware you want (JB or KK) you habe to get a stock recovery IMG..
this can be flashed by ADB using the known commands for flashing recovery..
when you have the stock recovery you can put an update.app (e.g. from the last b511) onto your SD card Ingo the dload folder..
then you habe to unplug your phone from pc and press all three buttons (power and Volumen +/- together) and hold them until you See the Android Figure (force update method)..
should work..
if not then you have to search for the twrp sideload feature (via Google)..
Click to expand...
Click to collapse
I am sorry to trouble..I am not a PRO in all these like u guys.
how do i start a ADB?? and where to download the stock recovery image?
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
nope
blueIBI said:
i am a noob too but made the same experience linke you now..
OK..so first things first..
you have twrp as recovery in your p6..so you have flashed this by "adb fastboot"?
Click to expand...
Click to collapse
no. I used a huawei P6 toolkit.
OK...then there should be the Option to install/flash a stock recovery..
here comes the next problem
I downloaded the abd driver installer 1.0,it identifies my phone.but once i press the button for installing the error pops up.,incompatible with win 8 (64 bit.)now what to do??
yes but
blueIBI said:
OK...then there should be the Option to install/flash a stock recovery..
Click to expand...
Click to collapse
The option of installing stock recovery is there,but now when i can connecting the phone its not recognising.it shows phone not connected.
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
ok let me
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I will try to find it and will update you
Thank youuuuuuuuuuu
blueIBI said:
hm..
then you should search in Google for the twrp adb sideload features to get a connection between phone and pc
Click to expand...
Click to collapse
I have no words to thank you..finally its done..the adb drivers were not installed well,thats why it was not picked up by the tool.I updated the stock recovery image and it rebooted and installed well...thanks a ton again..and I appreciate your fast replies.I had spend 2 days only in this.its such a releif.:victory::victory:
you are welcome
Again problem
blueIBI said:
you are welcome
Click to expand...
Click to collapse
I am sorry to trouble you again.yesterday i updater to B508 kitkat,but gprs or 3g were not working.so today I downloaded the B512 version.in this version if iam putting the dload file in SD card,it doesnt read it.I have to put this in internal storage itself.This time my phone is stuck in the normal android recovery stage as I dont have TWRP installed (I guess,the same shorcut is not starting TWRP).
And to update to the older version the update.app file should be there in internal storage which i cannot assess at this point since mobile doesnt start..what do I do??
I tried installing TWRP connecting mobile in the present status,but its not installing
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
again got lucky
blueIBI said:
hve you tried to do a force update (3 button method)..
it should work when you put the update.app in dload folder in your sdcard..
maybe you have to go to another Version (b122 or b132)..
but the only method that might now work is the 3 buttons (power and vol +/- together)..and you have to hold them until you see the Android figure (can take more then 10 seconds.. be patient)..
if this won't work then i'm too speechless (hadn't this case before)..
hope you geht your p6 running..
Click to expand...
Click to collapse
It worked.I fomatted the sd card and left only dload folder .and used the same version which was originally working (508).now its reverted back to normal ..half my tensions are over.but the i wanna change from this rom,in this my internet doesnt work..I wanted to install B510,but for that I have to install B132 first,which i am trying.but its not working.Any idea what should be done.?
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
blueIBI said:
try to flash then recovery Form b132 (usw the huawei update extractor to create one..can be found here in then forum)..then via force update you should be able to installiert then b132..and from there it is easy to load then b512 for example (system update local or force update (there you don't need to change the recovery)..
Click to expand...
Click to collapse
You meant I shoould make a recovery for B132 using huawei update extractor.I have the P6 tool with me,if i update a recovery image for jellybean (currently its kitkat) will that be enough??
yes will be enough..
bigger problem
blueIBI said:
yes will be enough..
Click to expand...
Click to collapse
I made B132.zip file and using TWRP i installed it.It showed the istallation was successful,and i rebooted to the system and its stuck in huawei ascend logo and its not moving from there.I tried again using the vol- + vol+ + powerbotton,Its restarting to the sa,me logo.somehow recovery is not working.I think now I am really screwed.
you should not make a ZIP file..
now you are at then beginning again..
Hey guys. I was on Kitkat Beta CN with TWRP. I wanted to update to B512 so I reverted to the original recovery B506CN recovery (downloaded it from here http://forum.xda-developers.com/showthread.php?t=2709353)
Once I pressed local update the phone reboots but I get the following error message:
Huawei SD card update fail.....
The update is /dload/update.app
Why do I get this error message and how to fix it in order to update to B512
try one of these http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810#post54736765 or http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?
When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?
Igano said:
When I enter recovery manually (without going at update section in settings) I see at first screen this message and I have to restart to enter at the recovery
ro.build.version.release = 4.4.2
ro.product.name = VEDGE
Current build version release is not 4.2 - don't need move.
USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is unlock state
Do you also see it or is this a clue?
Click to expand...
Click to collapse
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc
Igano said:
Tried many different combinations and nothing helped seems this problem is binded to my SD card. I tried different recovery versions and tried to update when I had 3 different roms. It seems I can't update with the stock recovery no matter what I do. I tried doing that in the internal storage but still the same mistake? Why should it access the SD card for an update in the internal storage?
Click to expand...
Click to collapse
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).
dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again
astrit1 said:
You should unplug your device from usb and then reboot to recovery because u can read there "USB Update Enter" that means your device is pluged to a pc
Click to expand...
Click to collapse
Yes I tried and it's still the same fails.
miz_pimp said:
Have you tried using the file to downgrade back to Jelly bean from KitKat?
https://mega.co.nz/#!8kcVADpB!JKeDlX4WQhmAP3mclNTfIzIjVllw5sMhnrj-3KSpSc4
Download the file, and place the dload folder onto your sd card, and do a local update as usual. When that is done, your phone will reboot normally. Just replace the dload folder with the one from B512, and try updating again. If it still doesn't work, I'd suggest doing a forced update using the 3-button method (power button & volume keys).
Click to expand...
Click to collapse
Did with your file and just any other rom I could find in the forum, still the same error
digijedi007 said:
dl this first http://www.androidfilehost.com/?fid=23252070760973625
extract it's file in your adb dir
You also could try this > run cmd on your pc >use
adb reboot bootloader
fastboot flash recovery "full name of the file extracted from the downloaded file inc it's extension"
fastboot reboot
then you could try flashing again
Click to expand...
Click to collapse
I tried and this recovery causes a constant vibrating when in recovery mode, apart from that I still get the same errors.
My only fast and easy solution would be if someone uploaded a B512 repack for TWRP. That would be awesome, right now I just use the B513 repack. I don't think I can find the fix to this any more.
Can anyone share B512 stock recovery please
maticex said:
Can anyone share B512 stock recovery please
Click to expand...
Click to collapse
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.
ADHDDHDA said:
You have modified build.prop file and thats why it keeps failing.. Download B132 firmware and put it to your sdcard/dload folder. What i say 3days/3 topics ago.
Click to expand...
Click to collapse
I don't know how but there isn't that message anymore, there is only sd card update fail everytime
try another sdcard..
Gesendet von meinem P6-U06
here's B512 recovery
Hi there,
Here's the recovery (inside the .7z file).
Hotfingers said:
Hi there,
Here's the recovery (inside the .7z file).
Click to expand...
Click to collapse
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb
maticex said:
Thank you
Anyone know how to come in fastboot mode with only stock recovery installed and no rom installed, because there is no devices showing in adb
Click to expand...
Click to collapse
OK, if you want to try getting adb and fastboot to work. Try these links...
http://forum.xda-developers.com/showthread.php?t=2588979
http://forum.xda-developers.com/showthread.php?t=2646453
If you want to flash a stock rom. Then on your EXTERNAL SDCard
* Create a folder called "dload"
* put the "UPDATE.APP" from the stock rom into the dload folder.
* power off your phone.
* hold volume up and volume down at the same time (keep them both pressed in).
* now use your third hand to press the power button.
* When the phone starts up keep holding the volume up and volume down buttons until the stock recovery starts up...
(this all doesn't work if your phone is plugged into the usb cable at the time, so you need at least 25% battery to do this).
good luck