Develop Bugs

[Q] help with xperia sl and pacman

hello
sorry for bad english
will i've follow the steps to install pacman ROM on my sl
" nozomi_PAC_JB_4.2.2-v20.1.0_Themed v2 "
now i wont to install " XZXperience_2_3 "
i've downloaded it and copy the zip file to sdcard ,, open recovery mode in CWM and install it
the problem that when i started the phone the pacman logo appers and after that give me black screen and nothain happen
tried also the stock 6.a.2.55 as zip in the same way and give me the same thing
help plzzzzzzzzz
what can i do to restore my phone ?!?!?!?!!

Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk

now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy

Ben36 said:
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Speka-3- said:
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Click to expand...
Click to collapse
thank you both
i've soved it myself
with flash tool
flash the orgnial ICS .55 and install recovery ics14.elf by fastboot and the installed the ROM
thanks ^_^

Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!

Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
1. Open zip file and copy boot.img to fastboot folder
2. Right click and select " Open cmd here" (Win7)
3. Type these commands
- fastboot flash boot boot.img (Wait when its done after few sec)
- fastboot reboot ( or unplug the cable and turn on your phone)
4. Now, boot into CWM to flash Rom
Take notice that you have to install fastboot driver first. Good luck :fingers-crossed:

Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
if you have a CWM Recovery in your kernel(like FXP's CM9 or CM10 kernel)
just copy the zip(you download from the PAC thread) to the internal storage
then boot into CWM, wipe,flash the zip,enjoy
recovery will flash boot.img automatically
if no work, try flash the boot.img manually, like the way on 6# reply

Lilude & Speca, thank you both for a quick reply, btw, your English is perfect.
Wow! So a different kernel can be flashed with the rest of the packet from recovery/cwm without needing a pc, (except for copying to sd card) .
A new bit of knowledge for me!
I'd click your thanks buttons if I knew how, but as you can see I'm new to the forum & still finding my way about.
Noobs of the world unite.

Both ways are fine but better flash separately in such situation. It definitely helps you avoid a broken CWM happening after that such as : can't backup the current Rom, can't mount system as well as can't flash anything, etc.. aside from having to reflash Stock Rom,otherwise the phone gonna get stuck on boot . How terrible !
Make your choice and do not mess up your phone, huh ?
Sent from my Xperia S using Tapatalk 2

If you say flashing the boot.img from my pc first is the safest option then I'll use that method.
I've already messed up several times when I was in stock, without a recovery, luckily EMMA came to the rescue.
Since custom rom cm10 I can't flash updates or anything else without a factory reset, partition & dalvic wipe is never enough.
So taking my time for this rom, download tonight, fingers crossed
______
Xperia s : fxp 212 nozomi
++++++++++++++++++
OK!
flashed boot.img
wiped everything
fixed permissions
mounted system
flashed PAC
rebooted
went back to recovery
flashed gapps
rebooted.
Works perfectly so far!
also I reinstalled my own apps manually instead of using titanium back up. I read this hint in the PAC v22 thread / dev section.
maybe this is 1 of the reasons I'm not having the odd problem that a few others are experiencing. who knows?
thanx all for helping
......................
Xperia S : PAC v22

How to flash a new kernel?

Hey i want to flash a new kernel on my rooted htc one x. It runs CM 10.1 4.2.2. Which one is the best and how to flash it? Is der any advantage or benefits of flashing a kernel?
Sent from my HTC One X

None of them is the best. Just try them until you find one that suits you best.
You flash it by flashing the modules zip in recovery and boot.IMG in fastboot.
Sent from my IceCold One X

Ok thanx!!
Sent from my HTC One X

So can i install any kernel on cm 10.1 or is there any specific kernel?
Sent from my HTC One X

alcatus1708 said:
So can i install any kernel on cm 10.1 or is there any specific kernel?
Sent from my HTC One X
Click to expand...
Click to collapse
Any kernel based 3.14 or higher

http://forum.xda-developers.com/showthread.php?t=2134086
Can i flash this kernel??.. Will this work on cm10.1
Sent from my HTC One X using xda app-developers app

Yes.

Mod please delete

TToivanen said:
Yes.
Click to expand...
Click to collapse
hey while installing a new kernel i went into fastboot...did fastboot erase cache....and then to copy the modules my phone was not getting recognized on my PC so I rebooted my phone so as to send the modules via bluetooth and now the bluetooth, wifi and network nothing is turning on!!!!!! PLS HELP!!
:'(

alcatus1708 said:
hey while installing a new kernel i went into fastboot...did fastboot erase cache....and then to copy the modules my phone was not getting recognized on my PC so I rebooted my phone so as to send the modules via bluetooth and now the bluetooth, wifi and network nothing is turning on!!!!!! PLS HELP!!
:'(
Click to expand...
Click to collapse
Flash the boot.img with fastboot and install the .zip with the recovery !

Mr Hofs said:
Flash the boot.img with fastboot and install the .zip with the recovery !
Click to expand...
Click to collapse
i flashed the boot image
how to install the zip
how to get the zip into the phone???? no wifi, bluetooth, usb, nothing is turning on..
PLS HELP

alcatus1708 said:
i flashed the boot image
how to install the zip
how to get the zip into the phone???? no wifi, bluetooth, usb, nothing is turning on..
PLS HELP
Click to expand...
Click to collapse
Mount the sdcard as a mass storage device in the recovery, copy the zip to it. Unmount and install it !

Mr Hofs said:
Mount the sdcard as a mass storage device in the recovery, copy the zip to it. Unmount and install it !
Click to expand...
Click to collapse
I just did a factory reset and re installed the ROM and transferred the modules on the sd card and then flashed the kernel and now everything is working fine.
Thanx for help though. Cheers!!

Mr Hofs said:
Flash the boot.img with fastboot and install the .zip with the recovery !
Click to expand...
Click to collapse
thnx!!!

:thumbup:
CASE CLOSED !

so you need to do all the steps, you need to do everything including installing the rom again from the start so you can flash the kernel?

Viktorviksa said:
so you need to do all the steps, you need to do everything including installing the rom again from the start so you can flash the kernel?
Click to expand...
Click to collapse
No, of you want to install a custom kernel on a rom you need to flash the boot.img and install the zip in the recovery !

refracted kesppal
hey guys plz help.
i flashed kernel my htc one x with all in one tool kit, and it was asking me to choose an image. so i chose (TWRP) from the ( ALL IN ONE TOOL KIT FOLDER) and when i switched on my phone it opens a blue page. and i cant go to my home page. :crying:
i donno what to do plzzzzz someone help
---------- Post added at 07:50 PM ---------- Previous post was at 07:29 PM ----------
Hey guys, while flashing the kernel on my HTC ONE X with all in one tool kit. i chose CWM IMAGE from the (ALL IN ONE TOOL KIT FOLDER)
and now when i switch my phone on it opens a gray page like this
yes-no Adv-wipe Recovery CWM based v6.0.2.7
v2.1
POWER=enter. VOL-UP=up. VOL-DOWN= down
reboot system now
install zip from sdcard
wipe data/factory reset
wipe cache partition
backup and restore
mounts and storage
advanced
power off
And i donno what to do . PLZZZZ someone help

Did you get help?
yasser223 said:
hey guys plz help.
i flashed kernel my htc one x with all in one tool kit, and it was asking me to choose an image. so i chose (TWRP) from the ( ALL IN ONE TOOL KIT FOLDER) and when i switched on my phone it opens a blue page. and i cant go to my home page. :crying:
i donno what to do plzzzzz someone help
---------- Post added at 07:50 PM ---------- Previous post was at 07:29 PM ----------
Hey guys, while flashing the kernel on my HTC ONE X with all in one tool kit. i chose CWM IMAGE from the (ALL IN ONE TOOL KIT FOLDER)
and now when i switch my phone on it opens a gray page like this
yes-no Adv-wipe Recovery CWM based v6.0.2.7
v2.1
POWER=enter. VOL-UP=up. VOL-DOWN= down
reboot system now
install zip from sdcard
wipe data/factory reset
wipe cache partition
backup and restore
mounts and storage
advanced
power off
And i donno what to do . PLZZZZ someone help
Click to expand...
Click to collapse
Hi!
Did you get the phone to boot up?

Tenho2 said:
Hi!
Did you get the phone to boot up?
Click to expand...
Click to collapse
My guess he did after 5 months

Stuck at boot-logo.

I flashed a custom rom on my phone, everything went good except the long boot time. The phone is now stuck at boot-logo.
Any help would be appreciated.
~Peace.

TheRightWay said:
I flashed a custom rom on my phone, everything went good except the long boot time. The phone is now stuck at boot-logo.
Any help would be appreciated.
~Peace.
Click to expand...
Click to collapse
Its Boot Loop...Factory Reset From Recovery...Clear Cache...Clear Dalvic Cache..and see

I'm Also facing same problem
plz help me what to do now...

comeback4you said:
plz help me what to do now...
Click to expand...
Click to collapse
Download stock firmware and flash via Odin..
Sent from my GT-I9082 using XDA Premium 4 mobile app

plz give me any stock firmware link... and how to flash ??

comeback4you said:
plz give me any stock firmware link... and how to flash ??
Click to expand...
Click to collapse
Samsung Official Firmware Link Is Here http://samsung-updates.com/device/?id=GT-I9082
Steps :
1) Download The firmware for u r region from that link (Approx 1.0GB)
2) Download The Odin 3.04 or Odin 3.07
3) Keep The default settings what are ther when u open.
4) Click On PDA button and select the biggest file ~1.0GB
6) Press VOL DOWN+POWER+MENU and then press continue.
5) Click START button.
6) Wait till it shows PASS
7) Boot to stock recovery do a factory reset
Enjoy
Any Doubts always free to ask

Flashed a 4.1.2 ROM over 4.2.2 and stuck in Bootloop
Hi,
By mistake I flashed the Aroma AMF7 ROM over the existing Gennext ROM... Now I am stuck in bootloop.... I cannot restore from Backup as it shows an MD5 checksum error... Can i flash stock 4.2.2 ROM over it now or should i flash 4.1.2...???
Help!!!
jackeagle said:
Samsung Official Firmware Link Is Here http://samsung-updates.com/device/?id=GT-I9082
Steps :
1) Download The firmware for u r region from that link (Approx 1.0GB)
2) Download The Odin 3.04 or Odin 3.07
3) Keep The default settings what are ther when u open.
4) Click On PDA button and select the biggest file ~1.0GB
6) Press VOL DOWN+POWER+MENU and then press continue.
5) Click START button.
6) Wait till it shows PASS
7) Boot to stock recovery do a factory reset
Enjoy
Any Doubts always free to ask
Click to expand...
Click to collapse

no need to go back 2 stock...jst flash d recovery which u usd 2 backup..nd den try restore ...
press thanks if i helpd
Sent from my GT-I9082 using xda app-developers app

Tried it but I seemed to have created a backup on phone memory and not on Ext SD Card...
So now, do i have any other options? and in any case, is it ok to flash stock 4.1.2 / 4.2.2 over whatever mess I have right now?
souravsasidharan said:
no need to go back 2 stock...jst flash d recovery which u usd 2 backup..nd den try restore ...
press thanks if i helpd
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse

mananbond007 said:
Tried it but I seemed to have created a backup on phone memory and not on Ext SD Card...
So now, do i have any other options? and in any case, is it ok to flash stock 4.1.2 / 4.2.2 over whatever mess I have right now?
Click to expand...
Click to collapse
no problem with that:good:
---------- Post added at 07:44 PM ---------- Previous post was at 06:50 PM ----------
Use philz recovery.... Dats d best one
Sent from my GT-I9082 using xda app-developers app

mananbond007 said:
Tried it but I seemed to have created a backup on phone memory and not on Ext SD Card...
So now, do i have any other options? and in any case, is it ok to flash stock 4.1.2 / 4.2.2 over whatever mess I have right now?
Click to expand...
Click to collapse
Best is Flash The Latest Official Firmware 4.2.2 and Do a Factory RESET from Stock Recovery not necessary though

Flashed 4.1.2 and flashed CWM and AROMA ROM... working gr8... Super quick and amazing deep sleep... battery life has never been so good... :good:
jackeagle said:
Best is Flash The Latest Official Firmware 4.2.2 and Do a Factory RESET from Stock Recovery not necessary though
Click to expand...
Click to collapse

i cant download firmware from this link... why is that??

SAME Problem
i just flashed the cyanogen mod 12.1 in my gt-i9082. and then booted to the CWM recovery and then was about to flash gapps minimal signed zip. i just cleared the dalvik cache and then accidently unmounted /system and some errors started listing in the log . After that my phone rebooted itself into CWM recovery but all turned black and now its stuck in boot loop also my CWM recovery is not working.
I read some threads and decided to flash the official ROM using Odin but Odin is stuck at File Anaylasis.
PLSSS HELP!!!!!!!!!!!

Can i install any other custom roms instead of the official firmware?

mananbond007 said:
Tried it but I seemed to have created a backup on phone memory and not on Ext SD Card...
So now, do i have any other options? and in any case, is it ok to flash stock 4.1.2 / 4.2.2 over whatever mess I have right now?
Click to expand...
Click to collapse
Boot into phil recovery and try VIPER rom its most stable and has performance head to development area of i9082 u will post over there
---------- Post added at 08:55 PM ---------- Previous post was at 08:53 PM ----------
Mark N Luke said:
Can i install any other custom roms instead of the official firmware?
Click to expand...
Click to collapse
Yes u can if your recovery is working head to development area of i9082 select the rom which suits u
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
samuraijack012 said:
i cant download firmware from this link... why is that??
Click to expand...
Click to collapse
Try www.sammobiles.com type it on google search your device make a account and download the stock rom

[Q] Stuck on Boot Animation :(

I am using Spice Dream Uno. I decided to install cm11 sprout ROM but it says that it is a bad zip. Then i tried this
http://forum.xda-developers.com/dream-uno/development/stock-rom-spice-dream-uno-mi498-t2915844 (Stock Rom for Android one)
still stuck on boot animation of Micromax
How to make my phone completely working.
PLEASE HELP

Rishabh-The Developer said:
I am using Spice Dream Uno. I decided to install cm11 sprout ROM but it says that it is a bad zip. Then i tried this
http://forum.xda-developers.com/dream-uno/development/stock-rom-spice-dream-uno-mi498-t2915844 (Stock Rom for Android one)
still stuck on boot animation of Micromax
How to make my phone completely working.
PLEASE HELP
Click to expand...
Click to collapse
solution for bad zip :
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise re download it..
solution for boot stuck :
did u replace oem and boot logo of mmx with spice?
try it and report..
or just flash the oem nd boot logo alone

Faiyaz5yaz said:
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise the re download it..
if again everything was perfect as mentioned above.. report it again here
Click to expand...
Click to collapse
my oem is unlocked, rooted mobile and have cwm 6.0.4
how to make my phone completely working ??
how to intall a stock rom or any other rom on my phone through cwm??
cwm shows error everytime when i install cm11 zip

Rishabh-The Developer said:
my oem is unlocked, rooted mobile and have cwm 6.0.4
how to make my phone completely working ??
how to intall a stock rom or any other rom on my phone through cwm??
cwm shows error everytime when i install cm11 zip
Click to expand...
Click to collapse
i hav edited my previous post.. check it again

Faiyaz5yaz said:
i hav edited my previous post.. check it again
Click to expand...
Click to collapse
ok wait let me flash these two.

Still Stucked
Faiyaz5yaz said:
solution for bad zip :
fine.. u must hav unlocked bootloader, rooted and custom recovery like cwm 6.0.4.x..
if its ok then verify your downloaded zip
..
this can be done by double clicking it on windows or in your mobile use file explorer..
if the zip contains meta-inf folder, system, boot. img.. then your download was good.. otherwise re download it..
solution for boot stuck :
did u replace oem and boot logo of mmx with spice?
try it and report..
or just flash the oem nd boot logo alone
Click to expand...
Click to collapse
I Replaced boot logo and Oem but still I Stuck on Boot Animation of Spice.
I Really don't know much about this phone. Please tell me a Working Method to solve my issue.
I want my Phone Working only. No Matter how but need it badly.

Rishabh-The Developer said:
I Replaced boot logo and Oem but still I Stuck on Boot Animation of Spice.
I Really don't know much about this phone. Please tell me a Working Method to solve my issue.
I want my Phone Working only. No Matter how but need it badly.
Click to expand...
Click to collapse
check if recovery is working or flash a custom recovery via fastboot and do three wipes..
and did u just flashed the oem nd logo or the complete rom? if not, try flashing the complete ROM with replaced files

Faiyaz5yaz said:
check if recovery is working or flash a custom recovery via fastboot and do three wipes..
and did u just flashed the oem nd logo or the complete rom? if not, try flashing the complete ROM with replaced files
Click to expand...
Click to collapse
I am using cwm 6.0.5.1
This is all happening.
see screenshots
i replaced boot logo and oem in a complete stock rom and then flashed.
what to do now ??

Rishabh-The Developer said:
I am using cwm 6.0.5.1
This is all happening.
see screenshots
i replaced boot logo and oem in a complete stock rom and then flashed.
what to do now ??
Click to expand...
Click to collapse
after flashing rom ur oem gets locked.. if u have already unlocked, now root the mob again...
if that isn't the prob, as i already said, verify your file in memory card if it s properly downloaded nd copied

Faiyaz5yaz said:
after flashing rom ur oem gets locked.. if u have already unlocked, now root the mob again...
if that isn't the prob, as i already said, verify your file in memory card if it s properly downloaded nd copied
Click to expand...
Click to collapse
its properly downloaded and copied but it is not flashable.
you simply tell me that which stock rom can i use to make my phone working.
link please?

Rishabh-The Developer said:
its properly downloaded and copied but it is not flashable.
you simply tell me that which stock rom can i use to make my phone working.
link please?
Click to expand...
Click to collapse
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..

Faiyaz5yaz said:
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..
Click to expand...
Click to collapse
ok wo bhi krke dekhta hu....

Faiyaz5yaz said:
well the cwm currently does not support flashing zip from sd card.. try adb side load if u hav unlocked bootloader and rooted..
if u don't want to do adb sideload, try flashing philz cwm.. its working perfectly..
Click to expand...
Click to collapse
bro.
here is my whatsapp number - 8010159864
text me on it and then i send you some screenshots of my issue.
waiting for your message.

Rishabh-The Developer said:
ok wo bhi krke dekhta hu....
Click to expand...
Click to collapse
philz
http://forum.xda-developers.com/cro...e-general/sprout-philz-touch-v6-57-9-t2887574

Faiyaz5yaz said:
philz
http://forum.xda-developers.com/cro...e-general/sprout-philz-touch-v6-57-9-t2887574
Click to expand...
Click to collapse
already downloaded this file bro.

my micromax canvas a1 stuck on boot
Rishabh-The Developer said:
already downloaded this file bro.
Click to expand...
Click to collapse
Hi rishabh
Have u find the solution for your phone
Even I had faced the same issue
I had installed cwm recovery on my canvas a1
And tried to reboot. My. Phone got stucked on boot
Animation I can boot into cwm recovery mode,fasboot mode but unable to start
Device
Can u please help me
I even tried by erasing cache data and dalvik cache also
But of no use
Regards
Harish k

use sp flash tool
use sp flash tool for flashing stock rom

Storage Layout and wifi problem

Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.

kinder771 said:
Hi,
So first I tried to install a new ROM over my Android Revolution ROM, flashing boot.img via Flashify.
Now the wifi, service and bluetooth dont work anymore.
So I tried to install the new layout many times via TWRP install through Flashify but every time I try a NL ROM (like FlexOs or any NL Rom) via recovery, i get : "your recovery is using the new storage layout but the rom you're trying to install is not" even after wiping /data and /sdcard0
I dont have any computer so I have to flash boot.img via Flashify.
Thanks in advance for helping me.
Click to expand...
Click to collapse
U dont have to flash the boot.img with flashify ...i had tried before to flash a recovery via flashify but it was not successful ...so you will have to try aroma kernel flasher to flash kernel/boot.img without the pc ...hers the link to it
http://forum.xda-developers.com/showthread.php?t=2413561

Great im gonna try this and ill telly ou
Thanks for your answer

Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.

kinder771 said:
Ok so I tried the kernel app and Aroma but I got stuck on a bootloop and ended reinstalling the old ROM using OTG.
So tell me everything i have to do, i have the ROM and the boot.img, what do install/do and how ?
Thanks a lot.
Click to expand...
Click to collapse
1. go ahead and download the kexec kernel v10(old layout) if you are on old layout or the new layout one if you are on new layout
2. Download this Recovery App: AromaFM-KL Flasher(4.6)(ZeusKL v10+ only)
3.download arhd rom
4. go into fastboot anf flash the kexec kernel you download in step 1 via Fastboot flash boot Zeus.img(or the name of the kernel.img )
5.Boot into recovery (TWRP).
6. Now you install Aroma-KL.zip. When you do this aroma file manager opens in recovery.
7. In aroma file manager select the zip of your rom i.e arhd
8. Now after you select your zip in the previous step, aroma gives you a list of options. In this select install the zip.(let all the option which are selected as it is ...dont deselect any option)
9.exit aroma
10.reboot

Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx

kinder771 said:
Sorry but i'm stuck at step 4 asking to flash zeus.img via fastboot because i have no computer.
Is there a way to flash it through recovery or through the app ?
Thx
Click to expand...
Click to collapse
No . I dont think so..(dont even try ...as ur hox may get hard bricked)
arrange for a computer for only this time ..and once you have flashed that kernel...you wont need a computer henceforth both for flashing a rom or a kernel you can do it via the aromma kernel

Ok then Ill try to get one.
Still thanks for all your help.

kinder771 said:
Ok then Ill try to get one.
Still thanks for all your help.
Click to expand...
Click to collapse
Dont say "thanks" hit the thanks button

You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help

kinder771 said:
You didn't tell me that : forum.xda-developers.com/showthread.php?t=2586472
I used my android tablet and it worked great !!
Thanks though for your help
Click to expand...
Click to collapse
Even i didnt knew that...thnx for your help
Did u succeed in flashing the aroma kernel flasher??

Yeah the boot gets flashed but for the rom i get : archive does not contain android-info/product.txt
Any idea on that?
Is it possible to flash Aroma zip via fastboot ? Whats the command to use ?
Thanks

Done I finally succeeded in transferring files to the HOX.
I am using twrp new layout (twrp big) so I booted in recovery, went to Mount and selected only Data then I transferred files from my tablet using "adb push (local) (remote)" !