How to flash a new kernel? - HTC One X

Hey i want to flash a new kernel on my rooted htc one x. It runs CM 10.1 4.2.2. Which one is the best and how to flash it? Is der any advantage or benefits of flashing a kernel?
Sent from my HTC One X

None of them is the best. Just try them until you find one that suits you best.
You flash it by flashing the modules zip in recovery and boot.IMG in fastboot.
Sent from my IceCold One X

Ok thanx!!
Sent from my HTC One X

So can i install any kernel on cm 10.1 or is there any specific kernel?
Sent from my HTC One X

alcatus1708 said:
So can i install any kernel on cm 10.1 or is there any specific kernel?
Sent from my HTC One X
Click to expand...
Click to collapse
Any kernel based 3.14 or higher

http://forum.xda-developers.com/showthread.php?t=2134086
Can i flash this kernel??.. Will this work on cm10.1
Sent from my HTC One X using xda app-developers app

Yes.

Mod please delete

TToivanen said:
Yes.
Click to expand...
Click to collapse
hey while installing a new kernel i went into fastboot...did fastboot erase cache....and then to copy the modules my phone was not getting recognized on my PC so I rebooted my phone so as to send the modules via bluetooth and now the bluetooth, wifi and network nothing is turning on!!!!!! PLS HELP!!
:'(

alcatus1708 said:
hey while installing a new kernel i went into fastboot...did fastboot erase cache....and then to copy the modules my phone was not getting recognized on my PC so I rebooted my phone so as to send the modules via bluetooth and now the bluetooth, wifi and network nothing is turning on!!!!!! PLS HELP!!
:'(
Click to expand...
Click to collapse
Flash the boot.img with fastboot and install the .zip with the recovery !

Mr Hofs said:
Flash the boot.img with fastboot and install the .zip with the recovery !
Click to expand...
Click to collapse
i flashed the boot image
how to install the zip
how to get the zip into the phone???? no wifi, bluetooth, usb, nothing is turning on..
PLS HELP

alcatus1708 said:
i flashed the boot image
how to install the zip
how to get the zip into the phone???? no wifi, bluetooth, usb, nothing is turning on..
PLS HELP
Click to expand...
Click to collapse
Mount the sdcard as a mass storage device in the recovery, copy the zip to it. Unmount and install it !

Mr Hofs said:
Mount the sdcard as a mass storage device in the recovery, copy the zip to it. Unmount and install it !
Click to expand...
Click to collapse
I just did a factory reset and re installed the ROM and transferred the modules on the sd card and then flashed the kernel and now everything is working fine.
Thanx for help though. Cheers!!

Mr Hofs said:
Flash the boot.img with fastboot and install the .zip with the recovery !
Click to expand...
Click to collapse
thnx!!!

:thumbup:
CASE CLOSED !

so you need to do all the steps, you need to do everything including installing the rom again from the start so you can flash the kernel?

Viktorviksa said:
so you need to do all the steps, you need to do everything including installing the rom again from the start so you can flash the kernel?
Click to expand...
Click to collapse
No, of you want to install a custom kernel on a rom you need to flash the boot.img and install the zip in the recovery !

refracted kesppal
hey guys plz help.
i flashed kernel my htc one x with all in one tool kit, and it was asking me to choose an image. so i chose (TWRP) from the ( ALL IN ONE TOOL KIT FOLDER) and when i switched on my phone it opens a blue page. and i cant go to my home page. :crying:
i donno what to do plzzzzz someone help
---------- Post added at 07:50 PM ---------- Previous post was at 07:29 PM ----------
Hey guys, while flashing the kernel on my HTC ONE X with all in one tool kit. i chose CWM IMAGE from the (ALL IN ONE TOOL KIT FOLDER)
and now when i switch my phone on it opens a gray page like this
yes-no Adv-wipe Recovery CWM based v6.0.2.7
v2.1
POWER=enter. VOL-UP=up. VOL-DOWN= down
reboot system now
install zip from sdcard
wipe data/factory reset
wipe cache partition
backup and restore
mounts and storage
advanced
power off
And i donno what to do . PLZZZZ someone help

Did you get help?
yasser223 said:
hey guys plz help.
i flashed kernel my htc one x with all in one tool kit, and it was asking me to choose an image. so i chose (TWRP) from the ( ALL IN ONE TOOL KIT FOLDER) and when i switched on my phone it opens a blue page. and i cant go to my home page. :crying:
i donno what to do plzzzzz someone help
---------- Post added at 07:50 PM ---------- Previous post was at 07:29 PM ----------
Hey guys, while flashing the kernel on my HTC ONE X with all in one tool kit. i chose CWM IMAGE from the (ALL IN ONE TOOL KIT FOLDER)
and now when i switch my phone on it opens a gray page like this
yes-no Adv-wipe Recovery CWM based v6.0.2.7
v2.1
POWER=enter. VOL-UP=up. VOL-DOWN= down
reboot system now
install zip from sdcard
wipe data/factory reset
wipe cache partition
backup and restore
mounts and storage
advanced
power off
And i donno what to do . PLZZZZ someone help
Click to expand...
Click to collapse
Hi!
Did you get the phone to boot up?

Tenho2 said:
Hi!
Did you get the phone to boot up?
Click to expand...
Click to collapse
My guess he did after 5 months

Related

HTC One X : The Disaster Fix

Hye XDAs members..I want to share my experience with you..
I have been through with a lot of trouble since I made something, kinda stupid with my phone..
The 'disaster', than I mention on the title is, when:
1. I have made full wipe
2. No ROM on sdcard (forgot to place it!)
3. I can't restore my nandroid backup due to md5 mismatch error!
4. Bootloop
So with that problem, means that I can't open my sdcard to place any ROM in it. Bootloop is not a big issue here, but the real deal was I can't have the access to my sdcard. Then the trouble begin when I can't boot, and stuck on HTC boot screen.
This was what I have done, to recover my phone. Hope I can help someone out there that having the same problem as I am. I have access to fastboot, so:
1. I flash a custom recovery, in my case I chose ClockwordMod Touch Recovery:
http://forum.xda-developers.com/showthread.php?t=1594819
fastboot boot recovery-clockwork-touch-5.8.4.0-endeavoru.img
2. After that, I put in these command to made my sdcard opened:
adb devices
adb shell
echo /dev/block/mmcblk0p14 > /sys/devices/platform/fsl-tegra-udc/gadget/lun0/file
3. The sdcard was opened successfully! I copied my choice of custom ROM, which was Charmeleon v5.0.0, to the sdcard. I also copied Super Wipe script from here: http://forum.xda-developers.com/showthread.php?t=1562603
4. After that I go to fastboot, flash the kernel, and went back straight to the recovery. I flashed the Super Wipe script, and then I flashed the ROM, reboot.
5. Finally I have my phone fully functioning again!
This tutorial was done in Windows 7. I have tried this on Windows 8 but unfortunately Windows 8 failed to recognize the commands due to lack of HTC drivers support. I haven't tried it on Ubuntu, yet.
Before you make everything, make sure you have charge you battery fully!
So I hope this thread here will be able to help somebody. Finally thanks to everybody here. Have a good day mates!
Referrals:
1. http://forum.xda-developers.com/archive/index.php/t-1609660.html
2. http://forum.xda-developers.com/showthread.php?t=1609190
3. http://forum.xda-developers.com/showthread.php?t=1605720&page=3
If you thought this was usefull, please hit 'Thanks' button for me..
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
muamers said:
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
Click to expand...
Click to collapse
I will definitely DO THAT, if I can..in my case, I CAN'T..
That is why I wrote this, for those who can't..I don't know what is wrong with cwm, but because of that error, I have to do all of that command..
Freddy1X said:
I will definitely DO THAT, if I can..in my case, I CAN'T..
That is why I wrote this, for those who can't..I don't know what is wrong with cwm, but because of that error, I have to do all of that command..
Click to expand...
Click to collapse
What can cause that:
1. You didnt instal the latest CWM
2. You didnt mount the right thing ...
3. You have bad drivers ...
But it is most probably the first one...
Sent from my HTC One X using XDA
muamers said:
What can cause that:
1. You didnt instal the latest CWM
2. You didnt mount the right thing ...
3. You have bad drivers ...
But it is most probably the first one...
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
I have install the latest CWM..I think it was caused by the Windows 8, that didn't support HTC drivers..I tried this on my wife laptop which is powered by Windows 7, and wal-lah, the drivers installed successfully..Windows 8 Release Preview still need some final touch before it goes to the market..I love Windows 8, but have to stick with Windows 7 after this case happened to me..
I don't really care if I haven't flash the latest CMW, what I do care is about people out there who have the same problem as I am..I just wanted to help them, and myself..
muamers said:
Why would anybody use the adb commands to copy anything to the SD card, it is already included/enabled (mount -->mount USB memory-->done) in the new recovery
Click to expand...
Click to collapse
My thoughts exactly.
That supports the theory above that the incorrect CWM was installed.
The previous versions couldn't mount the USB Storage, but as of the latest CWM, you can.
While that was a cool trick, I think installing the lastest CWM recovery image would have solved a lot of these issues from the get-go
Quiksilver78 said:
My thoughts exactly.
That supports the theory above that the incorrect CWM was installed.
The previous versions couldn't mount the USB Storage, but as of the latest CWM, you can.
While that was a cool trick, I think installing the lastest CWM recovery image would have solved a lot of these issues from the get-go
Click to expand...
Click to collapse
Thanks..I will definitely try it again.. :good:
Recovery
Hello,
After the fastboot command did you then reboot into recovery?
Once in recovery, my windows XP does not see any device attached. Should I see a device attached while in recovery?
If I should, where can I get this driver? I tried installing PDA.net to get this, but still there is no device found, and so no way to use ADB.
I'm stuck because I have to send system modules after sending a boot.img, but there is no way.
Edit: Ahh I fixed this by updating my CWM from 5.8.3.1 to 5.8.4.0!
md5 mismatch error
greetings...
first off i m very new (noob) in these rooting, ROMing etc of the HOX
i have a question on the mismatch error
recently i tried the JB ROM, got bootloop
then i tried to restore my backup with CWM 5.8.2.7
i got 2 backups, the stock rom and revolution hd rom
both backups return md5 mismatch error when i tried to restore
what actually gone wrong
need help... :crying:
zool80me said:
both backups return md5 mismatch error when i tried to restore
what actually gone wrong
need help... :crying:
Click to expand...
Click to collapse
You renamed them.
BenPope said:
You renamed them.
Click to expand...
Click to collapse
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
BenPope said:
You renamed them.
Click to expand...
Click to collapse
halfway worked, manage to restore but still got the boot loop :crying:
zool80me said:
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
halfway worked, manage to restore but still got the boot loop :crying:
Click to expand...
Click to collapse
You need to push the correct boot.IMG via fastboot before you flash the Rom that's usually cause of bootloop plus not clearing cache
sent from a powerhouse HTC one X quad core nvidia beast
grinder19 said:
You need to push the correct boot.IMG via fastboot before you flash the Rom that's usually cause of bootloop plus not clearing cache
sent from a powerhouse HTC one X quad core nvidia beast
Click to expand...
Click to collapse
will redo everthings agains, thanks
zool80me said:
ooo cant renamed the folder eh?
thanks will try it now...
---------- Post added at 10:32 PM ---------- Previous post was at 10:17 PM ----------
halfway worked, manage to restore but still got the boot loop :crying:
Click to expand...
Click to collapse
You have to flash the kernel of your ROM from bootloader..
fastboot flash boot boot.img
fastboot erase cache
Then try to restore your backup..

[Q] My HOX (HTC One X) wont install sense roms

Hello,
I have recently bought a second-hand HTC One X. When i bought the HOX it was rooted running the viper x 2.0.0 rom. I decided to change the rom to cyanogen 10 nightly. It was working fine but then i decided to install slim bean 3.0.0 and this was working fine too (this is what i have on my HOX right now).What i would like to do is install viper x 2.0.0 again or another sense-based rom. However i tried doing this and it does not boot. When i install it, it just loads the htc logo and then reboots again back into clockworkmod recovery?
I have tried various sense-based roms and none of then work? Also i know viper x 2.0.0 works because it was on there when i bought it.
Please can someone give me instuctions on how to do it.
Thanks in advance
P.S When i try to install the viper x or other sense-based rom i flash the boot.img using 'fastboot flash boot boot.img'
I have just fixed it i installed the latest version and worked the one i was installing must have been a ota update? anyway if u are stuck like me read this
after flashing the boot.img try "fastboot erase cache" it should work
erase cache always
Thanks for reply
Iacopo91 said:
after flashing the boot.img try "fastboot erase cache" it should work
Click to expand...
Click to collapse
Yes i have tried doing this many times and still isn't installing any sense roms?
Please could u give me a instruction to how to install a sense-based rom or viperx (step by step)
Thanks
He is what is says:
The5alodi said:
erase cache always
Click to expand...
Click to collapse
View attachment 1568226
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Viperx
TToivanen said:
Are you flashing the correct boot.img from the viperx rom.zip
Sent from my HTC One X
Click to expand...
Click to collapse
Yes, i know this because i use winrar to extract the boot.img from the viperx.zip
What do u think i should do to make it work?
I was thinking do i need to flash a kernel that works for the viperx to work or does the viperx.zip already have a kernel inside the file?
At the moment i have : 2.6.39.4-cyanogenmod because i have slimbean installed which is based on cm10
Full wipe, that's all I can think of.
Sent from my HTC One X
This is one of the ways i have done it:
TToivanen said:
Full wipe, that's all I can think of.
Sent from my HTC One X
Click to expand...
Click to collapse
1. go to bootloader and hit fastboot option
2. fastboot erase cache
3. fastboot flash boot boot.img (boot.img from the viperx.zip)
4. fastboot erase cache
5. disconect the phone from USB and go to the recovery
6. wipe data/factory reset
7. wipe cache
8. mounts & storage format system , data , cache
9. go to advanced and wipe dalvic cache
10. flash the rom
11. I rebooted the HOX in the aroma installer
12. and then it just boots on htc logo then back into recovery?!?
Also the weird thing is only sense-based roms don't work? And all the sense-based roms i have tried use aroma installer, maybe this could be to do with it?
First install rom then boot.img.
Sent from my HTC One X
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Ok will try now...
TToivanen said:
First install rom then boot.img.
Sent from my HTC One X
Click to expand...
Click to collapse
Ok i will try now and report back my results.
Thanks for possible anwser
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
It is...
The5alodi said:
did u full wipe inside aroma + what rom ver you are using maybe you are flashing an update or what hboot you are on ?
Click to expand...
Click to collapse
I will try now a full wipe and it is not a update as far as i am aware of. the file is called: ViperX_v2.0.0
And my hboot is:
HBOOT-1.12.0000
I have done this...
Iacopo91 said:
i used to install ROM before flashing the boot.img and erasing cache... if i flash boot.img before sometimes i'm stuck in bootloop...
the boot.img has to be extracted from the rom itself... also try to flash other different roms
Click to expand...
Click to collapse
I have done this?!?
try the latest i think its 2.7 or check ARHD because your problem is weird
ok i willl
The5alodi said:
try the latest i think its 2.7 or check ARHD because your problem is weird
Click to expand...
Click to collapse
Ok i will have to download it and its 647mb which will take me 1hr to 1hr and 30mins so will report back when i try to install it.
ok i am going to watch real Madrid match so P.M me i will help dont worry
ok thanks very much!!!!!!!!
The5alodi said:
ok i am going to watch real Madrid match so P.M me i will help dont worry
Click to expand...
Click to collapse
Ok i will do
Its working now!!!
Everyone thanks for helping i think i was instally a update not the actual rom !?! silly me !!!
Thanks again!

[Q] Cant install blade v2.1.0 ?

Hello,
I am wanting to install blade v2.1.0 on my htc one x with hboot 1.36 but when i flash boot.img and install it, it gets stuck on htc boot logo?
At the moment i am on viper x 2.7.1 if that helps?
Could anyone help me thanks in advance
thanks
Link...
http://forum.xda-developers.com/showthread.php?t=2027029
Try wipe before install.
i have already?
TToivanen said:
Try wipe before install.
Click to expand...
Click to collapse
This is what i have done:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot?
Thanks for repling do u no what to do? THanks in advance
i waited for 5mins on the htc logo and no sign of it booting?
Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !
Thankyou will try now..
MarcelHofs said:
Do it all over but this time install this zipfile before flashing the rom in recovery
http://db.tt/eLoVUcRc
Put this file on the sd card and flash it in recovery like a rom, when this completed install the blade rom ! Maybe it helps
Ps it's a superwipe script !
Click to expand...
Click to collapse
Thankyou for trying i will try now and report back thanks for your help !
Did not work!
It didnt work why do u think its not working?
When i install the desense version it takes less than 30secs to install and it says
"Installing update package"
But it cant be an update because it was 280mb and the 2.0.0 release is also 280mb?
Thanks for help any more suggestions?
Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !
hello thanks
MarcelHofs said:
Did u check the checksum of the rom ? Maybe bad downloads, are u using some download manager or accelerater ? Those things might cause trouble ?
Just thinking out loud here !
Click to expand...
Click to collapse
I know what u mean but no i am just downloading normally and i have just downloaded the sense version and itdid not work ?
I can still boot into viperx thou???
And how do u check the cheaksum?
Thanks in advance.
Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say
ckpv5 said:
Is your hboot now 1.36 ?
Can you run command fastboot getvar version-main in fastboot and write here what it say
Click to expand...
Click to collapse
He says it is on the OP.....so i assume he checked that
MarcelHofs said:
He says it is on the OP.....so i assume he checked that
Click to expand...
Click to collapse
I saw that, just need to reconfirm as he said after reboot he has ViperX running... but I don't really follow ViperX ROM, can that run on hboot 1.36 ?
Yes ... I'm running it on the 1.36 hboot myself
MarcelHofs said:
Yes ... I'm running it on the 1.36 hboot myself
Click to expand...
Click to collapse
Thanks for the info...
And now OP post his question in that Blade ROM thread, he will get more help there
Yeh I have hboot 1.36 and it still doesn't boot can u help ? Thanks in advance
Sent from my HTC One X using xda premium
Also I can use viperx cos the Rom can run on that hboot
Sent from my HTC One X using xda premium
The only thing i can think of is a bad download .....
If you flashed the kernel in fastboot, did a full wipe (superwipe script) and flash the rom it should boot ... It's just as simple as that !
And I don't see a modified boot.img in the OP of the blade rom either so that's not it !
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a
Lewiswatson99 said:
I can still boot into viperx thou???
Thanks in advance.
Click to expand...
Click to collapse
when you said you still can boot into viperx, you reflash the viperx ROM or just a reboot after failed attempt to boot Blade, it boots to viperx ?
Edit: It is either you use the superwipe script provided by MarcelHofs to really make a full wipe
or on your previous step that you mentioned:
1)flash boot .img
2)wipe date/factory reset
3)Wipe cache
4)wipe davlik cache
** format system <---- do this too
5)install zip from sd card
6)then reboot...
7)then stuch on htc logo on boot? it should boot
---------- Post added at 05:34 PM ---------- Previous post was at 05:00 PM ----------
MarcelHofs said:
I would gladly test it on my hox with 1.36 hboot but I can't until tomorrow in the evening .a
Click to expand...
Click to collapse
I think there is no need for you to waste your time to test the ROM. If he run your superwipe script, it should boot.
Check your PM.
What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..
tomascus said:
What I personally did:
1. format /system
2. wipe data/factory reset
3. clear dalvik and erase cache
4. flash ROM
5. flash boot.img
No problem..
Click to expand...
Click to collapse
Good ! And it's the standard procedure ....i'm not getting it why it doesn't boot ???

[Q] Tried to flash a kernel through hasoon2000's kit, now stuck on htc logo screen

Hi, I'm a complete noob and I just used Hasoon2000's kit to root my phone. I accidentally flashed the stock kernel because i thought that was a part of the rooting process. Now my One X is stuck on the logo screen. I'm a complete noob and I would really appreciate help without sarcasm.
Arshman said:
Hi, I'm a complete noob and I just used Hasoon2000's kit to root my phone. I accidentally flashed the stock kernel because i thought that was a part of the rooting process. Now my One X is stuck on the logo screen. I'm a complete noob and I would really appreciate help without sarcasm.
Click to expand...
Click to collapse
Which rom are you using currently, you just need the kernel from that rom which you can flash from fastboot.
gffmac said:
Which rom are you using currently, you just need the kernel from that rom which you can flash from fastboot.
Click to expand...
Click to collapse
The Stock rom is installed right now. I would really appreciate it if you could tell me how to flash the stock kernel.
Arshman said:
The Stock rom is installed right now. I would really appreciate it if you could tell me how to flash the stock kernel.
Click to expand...
Click to collapse
We need to know which stock system version you had to get the right kernel ideally or if you have a custom recovery you could go and flash a new rom which will have a kernel to go with it (depending on your hboot version).
gffmac said:
We need to know which stock system version you had to get the right kernel ideally or if you have a custom recovery you could go and flash a new rom which will have a kernel to go with it (depending on your hboot version).
Click to expand...
Click to collapse
I've got 4.1.1
I've also got ClockworkMod. I wanted to install cyanogenmod. Can I do that? Also if the battery is low can it recharge while stuck on the logo screen since only then I can see the red led indicating charging. Oh and I have hboot 1.36.0000
Then go ahead and install the latest CM. Your hboot is compatible !
Mr Hofs said:
Then go ahead and install the latest CM. Your hboot is compatible !
Click to expand...
Click to collapse
um, How? I understand you're supposed to place the .zip file on the sd card. My phone is stuck on the htc logo and the storage device doesn't show up on my pc, It's only registered as My HTC in the device manager.
Arshman said:
um, How? I understand you're supposed to place the .zip file on the sd card. My phone is stuck on the htc logo and the storage device doesn't show up on my pc, It's only registered as My HTC in the device manager.
Click to expand...
Click to collapse
Look for a tut..there are many out here
Sent from my HTC One X using xda app-developers app
Arshman said:
I've got 4.1.1
I've also got ClockworkMod. I wanted to install cyanogenmod. Can I do that? Also if the battery is low can it recharge while stuck on the logo screen since only then I can see the red led indicating charging.
Click to expand...
Click to collapse
I could be wrong but I think it charges when in custom recovery but not at the bootloader? Also you can mount the internal storage to your pc from custom recovery to copy a zip onto the phone.
Alex-V said:
Look for a tut..there are many out here
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Can you give me a link? I've been trying to find one for the past hour. All of them require the sd card.
Oke here we go :
1: what recovery do you have, type and version number ?
2: have you downloaded the cm rom + gapps ?
3: do you know fastboot commands ?
Mr Hofs said:
Oke here we go :
1: what recovery do you have, type and version number ?
2: have you downloaded the cm rom + gapps ?
3: do you know fastboot commands ?
Click to expand...
Click to collapse
I have Clockworkmod Recovery v5.8.2.7. I've got the cm rom but not the gapps. And I don't know the fastboot commands.
Arshman said:
Can you give me a link? I've been trying to find one for the past hour. All of them require the sd card.
Click to expand...
Click to collapse
Search button.......:.
As tip..one of the first thread in dev section
Sent from my HTC One X using xda app-developers app
Flash this recovery, your battery does NOT charge in that old recovery
http://db.tt/SPXdFfPw
Then flash the boot.img from the cm10 rom. Its inside the zip
Then you make a full wipe in the recovery and install cm10 and right after that the gapps file (all can be downloaded from the cm10 thread)
Reboot and done
Edit :
All flashing can be done with the toolkit
Mr Hofs said:
Flash this recovery, your battery does NOT charge in that old recovery
http://db.tt/SPXdFfPw
Then flash the boot.img from the cm10 rom. Its inside the zip
Then you make a full wipe in the recovery and install cm10 and right after that the gapps file (all can be downloaded from the cm10 thread)
Reboot and done
Edit :
All flashing can be done with the toolkit
Click to expand...
Click to collapse
Right, Thanks. But do I place the downloaded recovery in the recovery folder in the kit files? I did that and i don't see new recovery in the toolkit. But I'm assuming that's not what we're supposed to do anyway...
Arshman said:
Right, Thanks. But do I place the downloaded recovery in the recovery folder in the kit files? I did that and i don't see new recovery in the toolkit. But I'm assuming that's not what we're supposed to do anyway...
Click to expand...
Click to collapse
Right, so I tried to flash the recovery from the fastboot folder.It tried to do that but battery was low. I'll deal with that, but just tell me, can I flash the rom and the boot.img the same way as that?
Arshman said:
Can you give me a link? I've been trying to find one for the past hour. All of them require the sd card.
Click to expand...
Click to collapse
You can put files into the storage by booting into cwm recovery, selecting mount USB storage, and connecting it to your computer.
For how to flash ROMs, look at http://forum.xda-developers.com/showthread.php?t=2069904 second post.
Battery too low ?
Oke put this file inside the fastboot folder on the pc (you have the fastboot.exe file, should be in one of the folders in the toolkit dir)
http://db.tt/aLqeTpPO
Execute this file with the phone in the bootloader ! It will continuing to loop your bootloader and charge it little by little. Let it run for about 30 min and then flash again the recovery. The recovery name must be just "recovery.img" so rename it if needed
Mr Hofs said:
Battery too low ?
Oke put this file inside the fastboot folder on the pc (you have the fastboot.exe file, should be in one of the folders in the toolkit dir)
http://db.tt/aLqeTpPO
Execute this file with the phone in the bootloader ! It will continuing to loop your bootloader and charge it little by little. Let it run for about 30 min and then flash again the recovery. The recovery name must be just "recovery.img" so rename it if needed
Click to expand...
Click to collapse
So after I've done that, How would I flash the rom, I can't mount sd storage through cwm because it says " uns error, no such file or directory" I formatted the usb earlier, could it have something to do with that? Is there any other way?
Thats because i told you to flash the new recovery first from the link i gave you. That one is able to mount the sdcard so you can copy the rom + gapps to it

Problems installing CM11 - stuck at startup screen

Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
izemate said:
Hi Guys.
I have some problems installing CM11 on my
HTC One X - endeavoru
I have tried both installting
cm-11-20140204-NIGHTLY-endeavoru.zip
cm-11-20140203-NIGHTLY-endeavoru.zip
I use Colckworkmod v. 6.0.4.5 as recovery
Before install CM i
Wipe userdata
Wipe Cache
Wipe Dalvik Chace
Install CM.zip
Install GApps.zip
After installing i reboot but it keeps looping in startup screen with the Cyanogen logo
I have tried to restart / factory reset but i doenst work
Any ideas ?
Thanks in advance.
Click to expand...
Click to collapse
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
lukes91 said:
have you flashed boot.img via fastboot and then erased cache (always via fastboot)?
Click to expand...
Click to collapse
Yes Lukes is right. This is the typical issue if you didn't flash boot.img AND erased the cache. Give it a go, it'll fix it for sure.
fixed
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Sorry, always used sense roms on HOX
Sent from my Venomed HOX using XDA Premium 4 Chocolate Orange
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
mrkizy said:
You may flash boot.img before reboot your phone.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Read all posts hehe
izemate said:
Yep it did the trick ! now it works fine.
What are your experience with updating nightly builds.
Can i just update them through CMs update manager or is it best to flash from scratch.
Click to expand...
Click to collapse
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
aduly123 said:
Hi,
I am have the same problem except my HTC OneX is in a loop on the HTC screen. Can you please tell me how you flashed the boot.img and also from where did you get this file ?
Click to expand...
Click to collapse
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Mr Hofs said:
Why do people mess around even before reading !!!
You flash a boot.img via fastboot commands on the pc. The boot.img is located inside the rom.zip file !
I strongly suggest you start reading here
http://forum.xda-developers.com/showthread.php?t=1832891
Click to expand...
Click to collapse
Thanks Mr Hofs,
I flashed the boot.img after installing the ROM and then I erased the cache and rebooted the device and Vola - IT WORKED.
aduly123 said:
Thanks Mr Hofs,
Just one more question, do I flash before or after installing the rom.zip ?
Click to expand...
Click to collapse
You mean the boot.img ? Doesn't matter, can be done before or after.
I usually do it before.....just a habit.

Categories

Resources