Related
Hello all,
Thanks for the help you provide in this forum. I am wondering if bluetooth is working for you in the official WM6 rom? My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones. Non are pairing and it says it cannot find any bluetooth devices. In the WM5 rom, it was no problem. Can anyone help?
Best regards,
Gilbert
edit: sorry ignore me
Gilbert said:
Hello all,
Thanks for the help you provide in this forum. I am wondering if bluetooth is working for you in the official WM6 rom? My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones. Non are pairing and it says it cannot find any bluetooth devices. In the WM5 rom, it was no problem. Can anyone help?
Best regards,
Gilbert
Click to expand...
Click to collapse
I'm using with a jabra handsfree BT250v and there is no problem using it - works very well.
Plantronics Pulsar 590A , headset and wireless stereo working perfect.
VM
Infact the WM6 is faster in detecting present of my iTech bluetooth headset.
I just wish they would have fixed their stack to work with Microsoft Voice Command on mono headsets! It always amazes me how Microsoft can take the few great ideas they have and f**k them up! Not that it's entirely their fault but you think they'd have had it working on the more popular devices, especially with those of the company they are always raving about!
any improvement with a2dp at all with wm6?
drewy said:
any improvement with a2dp at all with wm6?
Click to expand...
Click to collapse
OS is moving faster with A2DP activated. I can listen mp3 over WiFi without sound drops.
VM
Bluetooth connection is much faster and better than that of WM5.
No problem in connection to WMP via my Itech Bluetooth earphone.
ckleea said:
Bluetooth connection is much faster and better than that of WM5.
No problem in connection to WMP via my Itech Bluetooth earphone.
Click to expand...
Click to collapse
I have an itech clip II how can I listen to WMP or Destinator navigation sounds through my BT?
Hmmm... Got different experiences, found that bluetooth on new official WM6 has some issues with my HT820 A2DP headset.
1. Every time to start the mp3 will skip first 2-3 seconds.
2. The connection will getting unstable after 30-40 minutes continue playing.
3. Randomly my HT820 will lost connection with my CHT9100, also in the Comm. Manager will showed Bluetooth "disabled", but the blue LED still blinking as usual. Tried to turn it off and on but no success, have to push the reset button to clear out the mass.
Hope this might make you feel better, you are not alone...
Cheers,
katsj said:
I have an itech clip II how can I listen to WMP or Destinator navigation sounds through my BT?
Click to expand...
Click to collapse
It is plug and play.
watchsat said:
Hmmm... Got different experiences, found that bluetooth on new official WM6 has some issues with my HT820 A2DP headset.
1. Every time to start the mp3 will skip first 2-3 seconds.
2. The connection will getting unstable after 30-40 minutes continue playing.
3. Randomly my HT820 will lost connection with my CHT9100, also in the Comm. Manager will showed Bluetooth "disabled", but the blue LED still blinking as usual. Tried to turn it off and on but no success, have to push the reset button to clear out the mass.
Hope this might make you feel better, you are not alone...
Cheers,
Click to expand...
Click to collapse
I am having the exact same issue with my S805's. Both made same time by moto, so similar setup I would say.
Gilbert said:
...My Trinity does not want to recognize any bluetooth devices. I have three - my laptop, my glasses and my headphones...
Click to expand...
Click to collapse
I don't use any Bluetooth devices (sometimes my laptop), can someone tell me what Bluetooth Glasses are???
Thanks
is there still a high cpu usage with a2dp playing? Is the os still usable for other functions?
The CPU usge for a2dp is still high with this WM6 Rom, but it does not drop at all. The usage is
I have Contacts(with 500 entries), Resco File Explorer 2007, calander, phone, and not forgotten the Core Player loaded with the ram down to 19Mb, there is still no drop in the audio. One exception is the touch screen, if you touch and and move with frequency then u will surely experience drop in audio. I am sure we Trinity or D810 user had known this issue since day.
the updated rom seems so far so good. All I have put on is trinity hacks and tomtom so far, so I wonder if it has to do with all the other junk or the update.
its called RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
on the edge of updating to froyo at the moment but might wait a week or two for the little problems to get ironed out..
just wondered though if they have improved the Bluetooth on the phone ?
I have heard a few people having problems with the HTC implementation of it and have myself a device with pairs but does not connect
thanks
mitch
hi mitch,
bluetooth issues are still there after official htc 2.2 froyo update.
I have a Logitech diNovoMini keyboard that can pair but not connect to my desire.
htc broke the damn thing...
Bluetooth woes
I have just bought a Linx B-Tube. It should function as a bluetooth headset (only it has a speaker). I was hoping to pair it with my Desire which was running Cyanogenmod RC1. I couldn't get it to pair so I decided to make the leap to the nightly to see if it made any difference....nope!
I can see the device and I am prompted for a passcode for connecting. When I enter the code it just goes back to the original screen and doesn't pair.
I have also tried pairing to my MacBook pro with the same result..
Any solutions would be much appreciated
I have a Vodafone unbranded HTC Desire running Froyo, and I have a similar bluetooth problem. It really sucks. My Plantronic bluetooth headset can pair and connect with the phone without any problem. The connection is fine and will automatically be re-established if the headset is in range. However, occasionally, yes, occasionally, the headset will be detected and connected, but can NOT be used. I can see the icon that shows that the bluetooth headset is connected. However, clearly the phone voice output is for whatever reason NOT routed to the bluetooth headset, and hence I can't talk using the headset. I found that once I got this issue, the only way to solve it is to unpair and re-pair the bluetooth headset.
Very annoying. These days software quality control is very poor.
Hi my problem is different. both with Android 2.1 and 2.2 my bluetooth headset (Blueant Q1) works fine except when the Wifi Connects to a new hotspot. When this happens teh bluetooth headset discoinnects and then reconnects : (
Maybe I should be happy it works most of the time listening to previous posters !
I have a LG Nitro HD running on AT&T. The phone came pre-loaded with 2.3.5. The bluetooth phone part works as I can make and receive calls with my car (Suzuki Kizoshi 2010), but the audio over bluetooth doesn't work. The phone part works as I can make and receive calls. This is very important for me to be able to play the audio over bluetooth as I have a long commute to work and like to listen to my music. Any help is greatly appreciated. Thank You.
It's been about a month and still no solution. Has anyone else come across this problem?
I do not have this problem. I have a Pioneer X930BT headunit in my car and my Nitro streams audio over bluetooth (A2DP) to it perfectly as well as phone calls.
Have you tried streaming Sirius or spotify over bluetooth? I found that the only app on the phone that streams audio to my car correctly is the pre-installed audio app that comes with the phone.
I can confirm google music and napster stream great over bluetooth. I have not used spotify or sirius for android.
Are you sure your car supports audio profile?
I stream spotify, tunein radio every day through bluetooth.
Spotify actually pauses when bluetooth connection is lost which is great for getting out of the car. I wish TuneIn would do it.
Sent from my LG-P930 using Tapatalk
I have had the same problem with my nitro, it will automatically connect the phone but the media (A2DP) seems to drop automatically after connection. I've found if I manually re-connect to the receiver both will stay connected.
(settings > Wireless & Network > Bluetooth settings > *tap device name*)
I, like you, use it every time I'm in the car so it's annoying but it's a fix until there is a valid solution like a update or properly built rom.
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
theoski said:
In your case I would delete all the phone profiles from the car memory and re pair them. A lot of cars have a seperate a2dp profile for streaming music and if you pair them seperately the car stereo thinks that it needs to be paired only with the cell phone while the phone says that is paired with phone and audio.
It is not a LG Nitro 4g issue. Updates/firmware would not fix it.
Click to expand...
Click to collapse
That seems to be your problem JoTomlin and Kaiser. Before I installed my new headunit in my subaru I had tons of issues with my captivate playing music over bluetooth because the car had seperate profiles for A2DP and handsfree. When I got my new headunit which has a single profile containing both A2DP and handsfree it all worked without headache on the captivate and now the nitro. This is a problem with your car stereo. If its anything like my subarus, it would prefer to connect to handsfree and it would have to physically disconnect handsfree to connect A2DP (I would have to manually connect via the bluetooth menu). I solved it by getting a tunelink bluetooth audio receiver so handsfree would connect to the stereo and to the tunelink at the same time. Eventually I got tired of that and bought a new headunit.
Apparently a lot of people have swapped out their factory Kizashi factory head units for something better. But again, you'll want to bug Suzuki about something like this.
FWIW, I can stream Pandora just fine over a VW headunit with factory bluetooth. I do have to sometimes to a reconnect/pair though.
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
JoTomlin509 said:
Has anyone figured out this issue? I stopped using my Nitro for about 5 months and then just recently updated it with 4.0.4, but still have the audio issue. My Samsung Galaxy SII doesn't have this issue. It's frustrating because I really like the Nitro. The Bluetooth audio is a huge issue though. Any help would be greatly appreciated. Thank You.
Click to expand...
Click to collapse
Did you factory reset after updating?
hello xda.
I've got a problem with bluetooth audio sync. Sync's fine in videos (youtube etc.), but in games the sound is 0.5 - 1sec "late" (off sync). I've tried with ten different games (ie. gta:sa, fifa16) and three different bluetooth headsets/speakers, no luck..
My 1+3 is completely stock.
Anyone else having this bug?
ps. I love this phone.
pps. My first post in xda! (Been following for 6ish years though) Noob bashing time everyone
check that the spec of the BT devices you are using (ie, BT 4.0 / 3.1 are likely better at sync than 2.1)
My headphones are jabra rox, bt v4.0... U not having this issue?
tuomos said:
My headphones are jabra rox, bt v4.0... U not having this issue?
Click to expand...
Click to collapse
I don't play games, but i don't see this issue with youtube nor with my BT audio in my car or headphones
Ok thanks.
It kinda sucks playing any game with audio 1sec off (impossible for me). I just wanna know that this bug is not universal for oos322 before i try full wipe oslt
So anyone with bt headphones and (any?) game, please test and let me know
Btw with wired headphones sync is ok
Hi, guys!
Recently I decided to install Android 7 ROM but have a strange bug with my bluetooth headphones.
It's Bose QC 30. After pairing they with my phone I hear no sound, but if I turn off and then turn on bluetooth on the phone the headphones work correctly. If I turn off and then turn on my headphones and they will connect to my phone, I hear no sound again
If my phone connects to my headphones - all right.
If my headphones connect to my phone - no sound.
When I used Android M, my headphones worked fine.
I tried any ROM with Android N: CM, lineage, Cypher (AOSCP) and many others, each of it has this bug.
I tried to use another headphones (QCY QY12) and very old bluetooth speaker (LG Music Flow P7), they worked correctly.
I don't understand, where is this bug in android N or in Bose firmware.
Any suggestions to fix it? Thanks!
Can I use anything to debug my bluetooth connection and read logs of it?
HTC One M8 (HTC__A07)
S-OFF
Firmware: 6.12.401.4
I would say its from the headphones because are probably old model.I have strange problems with Bluetooth headphones and speakers after upgrading to android 7.My opinion is that they are not compatible with the new version of the android.
mefistoreyon said:
I would say its from the headphones because are probably old model.I have strange problems with Bluetooth headphones and speakers after upgrading to android 7.My opinion is that they are not compatible with the new version of the android.
Click to expand...
Click to collapse
The headphones are a new model of September 2016 but they probably use a old bluetooth chip. Although I tried to use lg music flow p7 bluetooth speaker witch is too older than the headpones and it works fine.
It's a very strange issue.
Yes , strange indeed. Sadly I don't think there is fix for that
And I notice the simmilar issue with my laptop (macOS Sierra 10.12.2): at the first time when the headphones connect, they use SBC codec, if I reconnect they then they use AAC codec. May be Android 7 has a bug to work with SBC codec?