Develop Bugs

[Q] Unsure how to get to latest update - Rooted Stock

I currently have Stock 4.2.2 Rom - S-Off - Rooted - TWRP
How can I get to the newest Stock 4.3 (Radios, etc) ?
Is it easier to just flash stock recovery, then take the update, then flash TWRP and superuser back?
Or has someone made the update into a root-friendly flash-able zip yet?
Thanks in advance if this is a dumb question, but I wanted to ask so I get it right the first time.

sdlucky7 said:
I currently have Stock 4.2.2 Rom - S-Off - Rooted - TWRP
How can I get to the newest Stock 4.3 (Radios, etc) ?
Is it easier to just flash stock recovery, then take the update, then flash TWRP and superuser back?
Or has someone made the update into a root-friendly flash-able zip yet?
Thanks in advance if this is a dumb question, but I wanted to ask so I get it right the first time.
Click to expand...
Click to collapse
Look here >>>>

santod040 said:
Look here >>>>
Click to expand...
Click to collapse
Thanks for the info...
So I can just flash these with no loss of data? Or do will I need to restore data after I flash the rom?
My plan would be:
1) flash "Odexed Full ROM"
2) flash "2.10.605.1 firmware"
That should put me latest update stock right? (I might need to re-flash superuser)
I can flash all of this through TWRP?

sdlucky7 said:
Thanks for the info...
So I can just flash these with no loss of data? Or do will I need to restore data after I flash the rom?
My plan would be:
1) flash "Odexed Full ROM"
2) flash "2.10.605.1 firmware"
That should put me latest update stock right? (I might need to re-flash superuser)
I can flash all of this through TWRP?
Click to expand...
Click to collapse
You cannot flash the firmware in twrp.
It has to be done following the instructions in the post.
I would do firmware and then the rom.
Put the rom on your internal storage before flashing the rom.
Flash the firmware as instructed, then in recovery flash the rom, reboot.
Do not try to reboot in between, it wont work.
If you do it in that order you won't have to wipe, you will be on the latest OTA and have a rooted boot.img.
Supersu is installed already. You can prevent it from updating or flash the newest one here.
Read the OP and post#2 and follow it you should be fine.
Yes you want odex coming from full stock...

Thank you for all of the help santod040 !!
Your files and instructions worked perfectly.
I'll make sure to check in on your threads when the 4.4 update comes around.

KitKat 4.4 unmoded needed

Hello, I wanted to root and install TWRP then a KitKat ROM that's NOT altered or one that's been running and is a proven daily ROM. I haven't messed with Roms or phones for some time so I got all the info I need up to the ROM and I cant seem to find a stock rom. Any ideas?
Thanks!

Oxicottin said:
Hello, I wanted to root and install TWRP then a KitKat ROM that's NOT altered or one that's been running and is a proven daily ROM. I haven't messed with Roms or phones for some time so I got all the info I need up to the ROM and I cant seem to find a stock rom. Any ideas?
Thanks!
Click to expand...
Click to collapse
This is the latest NE1 4.4 stock firmware (france) from sammobile uploaded to a different host by an user for faster download speeds,extract the zip file you'll find a .tar.md5 file flash it via ODIN.Then you can just install custom recovery via pc odin (use philz 6.26 ot 6.41 initially and once you get a custom recovery successfully installed you can switch to twrp) now once into philz recovery flash supersu 1.99 from this post flash it right after you flash your recovery ,your phone should be rooted.Few things that you need to do is uncheck auto reboot in odin when flashing the recovery,after flashing philz you should manually enter it by pressing the right combination of buttons ( volume up + home + power) and then flash the supersup 1.99 zip file right away. (place the supersu zip file in sd card right after you flash the 4.4 ROM and before you proceed to install custom recovery)
Philz touch
twrp
NE 1 Stock France

Unclear
singhpratik87, I'm a little unclear on the sequence your proposing me to go through to install a ROM. I thought you installed;
1) Superuser ...... Done!
2) ODIN Custom Recovery (TWRP) ...... Done!
3) NE1 4.4 ROM ..... Downloaded moved to phone but not installed...
Ok here are my concerns, I'm on a AT&T 1317 phone will this ROM work OR would a custom ROM be better? Next, what is Philz touch?
Thanks,
Soggy

Oxicottin said:
singhpratik87, I'm a little unclear on the sequence your proposing me to go through to install a ROM. I thought you installed;
1) Superuser ...... Done!
2) ODIN Custom Recovery (TWRP) ...... Done!
3) NE1 4.4 ROM ..... Downloaded moved to phone but not installed...
Ok here are my concerns, I'm on a AT&T 1317 phone will this ROM work OR would a custom ROM be better? Next, what is Philz touch?
Thanks,
Soggy
Click to expand...
Click to collapse
See you didn't mention that you were on AT&T,unfortunately it wouldn't work you got to wait for your carrier to release the update. My explanations were pretty straight forward but now it doesn't matter anymore since you don't have the international note II GT N7100. The rom was supposed to be flashed via ODIN not SD CARD (it's a stock rom not a custom rom).And the steps are (for future reference) flash stock rom via odin, then flash philz via odin(uncheck auto reboot in odin),manually enter into recovery mode , flash supersu 1.99(or whichever is the latest) , reboot phone , DONE.
Philz touch is another popular recovery used by note II users .it's based on CWM with advanced features.

singhpratik87..... What custom ROM out there is equivalent to the 4.4 kitkat for a AT&T I317 Note 2 running 4.3? Those would prob be better anyway....
Also this other recovery you mention is it better? Like I said I have been out of messing with phones for a few years Thanks!

Oxicottin said:
singhpratik87..... What custom ROM out there is equivalent to the 4.4 kitkat for a AT&T I317 Note 2 running 4.3? Those would prob be better anyway....
Also this other recovery you mention is it better? Like I said I have been out of messing with phones for a few years Thanks!
Click to expand...
Click to collapse
None in the International Note II forum that would be compatible with AT&T as far as 4.4.2 is concerned.There's no development for 4.4.2 in your a&t note II thread?
why don't you check out this thread which is specifically for your at&t branded note 2 http://forum.xda-developers.com/galaxy-note-2-att/development

How can I update to 4.4.3 with Custom Recovery?

Hi people,
I have a problem here, I have TWRP installed and now the OTA update loaded some minutes ago. The update process fails though as it reboots into TWRP and thus is not able to complete installation. How do I update to 4.4.3 now? Is there a flashable zip? Thanks!

fBx said:
Hi people,
I have a problem here, I have TWRP installed and now the OTA update loaded some minutes ago. The update process fails though as it reboots into TWRP and thus is not able to complete installation. How do I update to 4.4.3 now? Is there a flashable zip? Thanks!
Click to expand...
Click to collapse
OTA won't work if system was modified, as in your case having custom recovery. It will keep failing on you. That's as far as the bad news go
Now the good news, at least two options:
You can download a flashable zip file of 4.4.3 ROM (either Google's stock or any other custom ROM- there are plenty to chose from in both development threads in this forum, just a matter of choice), follow instructions and flash the ROM.
Or, download stock image from Google, use some tool such as Nexus Root Toolkit (in this forum's development thread) and follow instructions (something like unroot, install update, root again and install custom recovery such as TWRP etc). You have choice also to keep data.
Good luck.

New to rooted LG GPad-have questions

Hi folks. Long time rooter/rom user of phones and tablets. I have some questions for my V500
Since it is rooted, would this be the next step - http://forum.xda-developers.com/showthread.php?t=2641409
(Installing TWRP for a custom recovery)
Since I'm on 4.4.2 with a V50020d base, would I then focus on getting 4.4.2 base roms and flash them via that TWRP I installed?
This does seem like a really fun and snappy device. From what I can tell, it has an IR Blaster right? Are there any roms that don't work with the blaster (I see this sometimes in the Galaxy Tab roms for devices that have the IR blaster)

Once you root, the next step is installing TWRP so you can install roms.

I also have the V50020d UK version.
Stumproot which is available here worked fine for me, easiest root i have ever done. Just install apk and your done.
Installing and getting custom recovery to successfully flash a ROM is another story. I have managed to get TWRP flashed to the device and boots correctly. However it fails when i try to flash CM11 or any other ROM. After reading around I think I may have to downgrade the stock 4.4.2 to 4.2.2 in order to get TWRP to flash. I am not struggling to find the correct stock 4.2.2 kdz firmware for the v50020d device.
It's been a bit of a head scratcher! Let me know how you get on with yours.

Cracked it today. I've written a guide for all UK users who are stuck with V50020d, compiling all the info. http://forum.xda-developers.com/lg-g-pad-83/help/v50020d-uk-root-twrp-flash-stock-4-4-2-t2938914
Hope it helps

fresh87 said:
I also have the V50020d UK version.
Stumproot which is available here worked fine for me, easiest root i have ever done. Just install apk and your done.
Installing and getting custom recovery to successfully flash a ROM is another story. I have managed to get TWRP flashed to the device and boots correctly. However it fails when i try to flash CM11 or any other ROM. After reading around I think I may have to downgrade the stock 4.4.2 to 4.2.2 in order to get TWRP to flash. I am not struggling to find the correct stock 4.2.2 kdz firmware for the v50020d device.
It's been a bit of a head scratcher! Let me know how you get on with yours.
Click to expand...
Click to collapse
I did mine with towelroot. I'll be looking to flash a custom recovery soon. I wanted to pop in here first to double check before going ahead with a recovery and a rom.

I new to LG and have 2 of these for my boys.
I have a us and uk one, i assume these will need different ways of rooting and flashing twrp etc?
I rooted one with Kingoroot no issues, but damn, getting cwm to install is a mare.
Both mine are on 4.4.2.
Looked at so many tuts, they all change due to time and i had to give up as was draining me.
Any tips on how to get cwm installed fella.
Best wishes

I've just created a tutorial for first time custom recovery installation.
http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-t2945917

Deltadroid said:
I've just created a tutorial for first time custom recovery installation.
http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-t2945917
Click to expand...
Click to collapse
Thank you Delta. I will check it out ASAP.

[Q] Need help! Steps on installing lollipop with custom recovery + root

Hi guys,
I'm not sure exactly where to look for the steps because I'm in a unique situation or atleast I think I am. I need help on installing the LOLLIPOP firmware (N900TUVUFOB6) with a custom recovery and root. I am currently on a rooted note 3 v4.3 with the N900TUVUBMI7 baseband version.do I need to update my bootloader to a newer version? Should I atleast do a stock update to 4.4? Should I be using which custom recovery?
If I'm correct, I can't just flash the latest custom recovery and then flash the newest lollipop (for example the newest TEKHD like this link http://forum.xda-developers.com/showthread.php?t=2672393
Or can I? What If I just did a normal software update to upgrade me to lollipop, will the bootloader be blocked, disabling me from installing a custom recovery since I would want to root as well. And then would I be able to resume the steps from TEKHD instruction?
Thanks!